Security on the cc Web site problem?

Similar Questions

• Security / reset the integrated Web site administrator password

  Hello

  I use a HP Photosmart 7510 e-All-in-One - C311a (PMN: CQ877A, Firmware: VEP1CN1137CR).

  While trying to set up the integrated Web site security administrator password, I used a generated password of 20 characters.

  After that, I was unable to connect to printer with the same password administrator settings. I also tried with the same password remove some characters at the end, one by one, just in case the internal password printer storage area has truncated less than 20 characters.

  I tried a partial reset, semi Full Reset, OOBE Reset, full Reset (through what appears to be a blue start menu) and clear derivatives. None of these methods erased the administrator password.

  Is there a specific command or method that would allow me to access administrative back?

  Thank you

  Hi Jay4096,

  The full semi's to zero that would reset the password in your screenshot that you provided. You will need to contact support and let them know that the printer fails to clear the password by using the semi full reset. You can contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• Microsoft support "Sign In" on the Canadian Web site problems

  Hi, I'm of the Canada.

  I tried to sign in Support of Microsoft, specifically at this address:

  http://support.Microsoft.com/?ln=en-CA

  When I'm in 'http://support.microsoft.com/?ln=en-ca' in the upper right corner of the screen, it is said: 'change of Canada. " Which I guess means that I am on the Canadian Web site, since I live in the Canada.

  I click on Contact a technician of technical support by email, online or by phone

  then I click on Windows Vista Home Premium 64 - bit Edition

  Then I get this message "type the product identification number."

  I found the identification number of the product in the menu 'Start', click 'Control panel' and click on 'system '. I also noticed that it contains some basic information about my computer. As it is Windows "Windows Vista Home Premium" edition. "Service Pack 1". "System type: 64-bit operating system. And my "Product ID: ' 12345-XXX-1234567-12345.

  I enter my code of 23 characters in the field, I make sure that letters are uppercase and click on the continue"" button.

  That the of when I always get this message "there was a problem with the product ID. Please re - enter the ID of the product in the correct format. You can also get support by paying with a credit card. »

  I tried to enter my "product identification number" to the address of the US site as follows: "https://support.microsoft.com/oas/default.aspx?&c1=509&gprid=11920&&st=1&wfxredirect=1" I guess that's the American site because it says in the upper right of the screen: "United States (English). I get the same message: "there was a problem with the product ID. Please re - enter the ID of the product in the correct format. You can also get support by paying with a credit card. »

  I wonder if I need to cookies, or something on my computer to enter the Web of Support Microsoft Canada (English) site? http://support.Microsoft.com/?ln=en-CA

  If your computer is pre-installed with Vista (Dell, HP, etc.), you are not FREE Microsoft Support.

  All support is the manufacturer of your computer.

  But if you have problems, please ask in the Forums.

  http://social.answers.Microsoft.com/forums/en-us/category/windowsvista/

  Link above has a list of the Vista Forums for specific questions.

  See you soon.

  Mick Murphy - Microsoft partner

• Blocked the hotmail Web site to display content with security certificate errors

  Blocked the hotmail Web site to display content with security certificate errors.

  Need help with answers.

  Hello

  1. which browser is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link if you have Internet Explorer and check.

  "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site

  Answer to us if you are having problems with Internet Explorer security certificate errors or any other problem of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Lost my copy and I tried to download the iso from the Microsoft web site, but my product key will not validate, pass this message: we had a problem with the validation query

  Original title: error Windows 7 installation files

  I bought a copy of Windows 7 at Tiger Direct on 22/05/2014.  I lost my copy and I tried to download the iso from the Microsoft web site, but my product key is not valid.  I get this error message

  We had a problem with the request for approval.

  FAQ

  See for other directions:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-update/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

• Can I hire the CC Adobe as a person and use it in a business without generating any legal problems for the company? I'm in the Brazil and the Adobe Web site, that I have not found that everything related to the legislation, they apply in this country on t

  Can I hire the CC Adobe as a person and use it in a business without generating any legal problems for the company? I'm in the Brazil and the Adobe Web site, that I have not found that everything related to the legislation, they apply in this country on this issue.

  single user licenses allow you to use the adobe corporate programs and allow to sell the products that you create using adobe programs.

• I am owner of acrobat 9 pro and he had to re - download the program from a computer problem but when I get the code of the adobe Web site gives me error invalid serial code.  I use copy / paste to prevent Miss typing the code.

  I am owner of acrobat 9 pro and he had to re - download the program from a computer problem but when I get the code of the adobe Web site gives me error invalid serial code.  I use copy / paste to prevent Miss typing the code.

  Hi Laurent,.

  Please try the steps listed in the KB: https://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html

  Kind regards

  Rave

• Unable to delete the data from the Safari Web site...

  Hello.

  I need help with my Safari browser on my Mac.

  Im trying to remove all Web site data with the following procedure:

  Safari-> Preferences-> privacy-> Remove All Data Web site...

  His does not work. Before clicking on the button I have 108 Web sites stored cookies or other data, I click the button, and nothing happens... I'm still 108 cookies.

  I also did the following:

  . - activate the Menu developer and Cache empty and tried again... nothing

  . - used CleanMyMac v3 and it says I don't have cookies.

  . - order iCloud Sync of Safari on the computer and try again... same problem

  . - removed manually com.apple. Safari. Secure

  Any help will be great. Please let me know if you need any additional info.

  Thank you.

  Hello DZanvettor,

  Thank you for using communities of Apple Support.

  If I understand your message that nothing happens when you try to remove the Safari Web site data. I know how it is important for you to be able to remove the Safari Web site data. I recommend that you restart your Mac into safe mode and see if you can remove the data from the Web site in secure mode.

  Here are the steps to restart your Mac in safe mode:

  Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening.

  From your Mac in safe mode does the following:

  * Check your startup disk and attempts to fix problems if necessary directory
  * Loads only required kernel extensions
  * Prevents the elements start and the login items open automatically
  * Disables installed user fonts
  * Delete font caches, hiding the kernel and other files of the system cache
  * Together, these changes can help resolve or isolate issues related to your startup disk.

  Follow these steps to start in safe mode.

  1. start or restart your Mac.
  2. as soon as you hear the startup tone, hold down the SHIFT key.
  3. release the SHIFT key when you see the Apple logo appears on the screen.

  After you delete data from the Web site in safe mode restart your Mac and allow it to start up as usual. Then test the issue again.

  Best regards.

• My machine works all the microsoft Web sites. I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites Ms.

  Could not open the MS Sites

  My machine works all the microsoft Web sites. Formatted several times and doing a new installation, I can access the site for a few minutes, after a while, it displays a virtual memory and the next stage i cannot access sites MS. no software or installed applications. cool, but I can not go to Sites Ms. other Web sites, I can access.  Also tried to change the memory... no luck, I've seen other sites asking to change the settings of the modem or dial the ISP, but my 2nd computer work well on the same network, took my computer to the office network and found that the same problem exists... could someone help me please...

  Hello

  Please let me know if:

  1. you are able to access other Web sites, or the question appear with only Microsoft based sites?

  All other websites work well. problem only in trying to gain access to www.microsoft.com

  2. What is the operating system that is installed?

  Windows XP Pro.

  3. are you aware of the physical RAM installed?

  1 GB

  4 and it meets the minimum requirements of the browser you are using?

  For the past 2 years my laptop works fine with the same hardware configuration. It stops working suddenly MS websites. I did not have all the hardware changes.

  Provide answers to the following questions.

  a. also mention the name of the operating system that you use.

  Windows XP Pro

  (b) is there an error message that is displayed when the site no longer works?

  trying to access the page from www.microsoft.com when rises, it is 'Impossible to view the Page.

  c. What is the browser you are using?

  Tried it on IE, mozilla and chrome.

  I tried to change the size of the memory virtual and also changed to the size of the managed system.

  formatted and installed xp pro with sp3 and I also tried formatting and install from different cd with xp and sp2. It works for 3 or 4 minute MS sites and the message immedly appears low virtual memory and it stops working MS sites.

  tried to change the physical memory.

  Tried with different browsers.

  at the top does not a little luck. :(

  Method 1: Please visit the following link to change the size of virtual memory

  Change the size of virtual memory

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  Method 2:

  See the following links

  http://support.Microsoft.com/kb/967897

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/972034

• After format and install Win XP Home and SP3 why can't open the Microsoft web sites?

  Need help, guys

  I had to replace my HARD drive in my computer. I installed my Windows XP Home SP2 disc. After installation, I used my SP3 upgrade drive and my drive to upgrade to IE8. After you install all my drivers, I tried to get Windows dates and discovered that I could not access the Microsoft web sites. I get Internet Explorer cannot display this page. I tried to find out why this is happening and how to correct the situation, but have not found an answer that works yet. Can someone give me an answer to this question.

  I have another (used) computer that I formatted the HDD installed and on Windows 7 and have had no problems to access the Microsoft web sites on. It uses the same modem cable like the other computer so I guess that everything is ok with my Internet connection. This problem seems to be only with Windows XP Home SP 3.

  Think in advance for any help

  Btk (billy the kid)

  Please do not share in the whole "BOLD". Which makes it hard to read!

  Please check that SP3 is installed:
  Start | Run
  Type:
  winver
  Press OK.
  Also, tell us what you mean by "trying to get Windows dates" since there are two ways to do this!

• On the MIcrosoft Web site, when I put my product key, they say that this license is already in use, and I have to ask the manufacturer of PC

  Original title: WINDOWS license

  Hello everyone.

  Ive broke my PAvilion G6 core i5 laptop and now I'm going to change the internal hard drive. How can I use my old license of Windows 7. On the MIcrosoft Web site, when I put my product key, they say this license is already in use and I must ask the manufactor PC.

  I thank in advance for which will help me!

  Hello

  Or you can also borrow the same exact retail edition DVD of Windows 7 and use your product key to reinstall.

  The COA sticker with the product key is either or in the battery compartment on the underside of the laptop.

  With a desktop computer, it's on the side, the back or the top of the computer case.

  

  If you have problems with Activation:

  If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

  See you soon.

• Virgins of the Microsoft Web sites

  Hello

  Had a problem with www. Microsoft.com/en-gb/ and other Microsoft Web sites.  The pages would empty.  If I saw the source of the page, it showed what appeared to be good code but it wouldn't display.  Tried it on 3 computers and different browsers and finally discovered our firewall was blocking these 2 sites; optimizely.com & webtrends.com.  Additional troubleshooting led me to below errors in firefox debugging:

  Cross-Origin Request Blocked: The Same Origin Policy disallows reading the remote resource at http://245891958.log.optimizely.com/event?a=245891958&d=222980912&y=false&s246309427=false&s246283596=none&s246529070=search&s246325475=ff&s223040836=referral&s244338170=none&s223033821=false&s223082014=ff&n=http%3A%2F%2Fwww.microsoft.com%2Fen-gb%2Fdefault.aspx&u=oeu1407491926997r0.3934455576942528&wxhr=true&t=1407497589057&f=786484282,1502690693,582790519,1500750723,773750047&g=. This can be corrected by moving the resource to the same domain or activation of CORS.

  and

  « NetworkError : 413 demander entité trop l... uest URL path too large - http://ots.optimize.webtrends.com/ots/ots/js-3.2/311121/WT3UxVa6PLti1PApEnatsfzR_hLDxUXjl2XdUKSLIp5FPljsTAQ5hmU0fx9gvmsg3YVt0RR3lOjRvfPIcexYaLvu8Xgj27qF-TEnuYew9WvzjX0-Tz5iJbn1akhrRcaJQZqAWkEYscu_m732k5ket_mjC-Zfkh6e-b4vn_hz4go-...rest truncated"

  The only way I can get the Microsoft Web sites to view is by adding exceptions for optimizely.com & webtrends.com.

  Anyone shed any light on this?  Thank you

  Yes, I can confirm that the areas of Microsoft using WebTrends optimize scripts.

• Is it possible to download an image (.iso) of the operating system from the Microsoft Web site?

  As I've already bought the computer with the operating system installed on it and apparently I have not received any CD of the OS with it. But I have the ID of the product on the computer... is there a way where I could get a copy .iso of my operating system on the Microsoft Web site?

  Thank you!

  On-site upgrades are not well regarded by some contributors of this forum, including me. However if you want to try, I refer you to this link for an iso download...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/where-do-i-download-a-new-Windows7-Home-Premium/39547f65-5a91-4608-A439-c4ccaed1de56

  But before you go this route, I would say as you explore the possibilities to fix the problems you have in other ways. Try to publish or questions about your problem and see what happens. You can save yourself a lot of grief.

  Tricky

• Connection to the banking Web sites

  For some reason some a few days ago I stopped being able to connect to the Bank Web sites. It doesn't matter which browser I use I either get the message Web page is not available or the page has been reset. So far, no one knows how to solve this problem. I tried to uninstall anti protection against viruses, disabling firewall, but nothing works. Any suggestions would be helpful.
  Thank you

  I would like to use system restore to set the machine in a week.

• My computer crashed and after the purchase of another, I used the Migration Wizard to copy all the files to the new computer.  Everything was going well until I tried to launch LR6.  It was two weeks ago and a search for many pages of the Adobe Web site. 

  My computer crashed and after the purchase of another, I used the Migration Wizard to copy all the files to the new computer.  Everything was going well until I tried to launch LR6.  It was two weeks ago and a search for many pages of the Adobe Web site.  I think I've exhausted all the remedies listed without success codes error A12E5 to questions cloud creative, Manager of Application and error 1: Configuration problems.  I'm ready to reformat my computer and try again with Time Machine.  Help would be greatly appreciated before I waste more time on this task. Any further suggestions?

  Migration of Mac with Time Machine WILL NOT WORK with the Adobe program activations due to hidden registration files

  Sign out of your account... Uninstall... to run vacuuming...

  -non-Cloud programs, to disable the service before uninstalling

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and before reinstalling is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall