Service Pack 2 Upgrade install clear on all of the unnecessary files?

Similar Questions

• My computer says it is running service pack 3, but I noticed that two service pack 2 were installed. Is this right?

  My computer has terrible fonctionnee and will not at all.  There a lot of errors blue screen and constant freezes.  It happens all the time.  The fact that service pack 2 is installed would be part of the problem?  Also, is it OK to enter the program records to remove a program if it does not appear in the section install/remove?  Thanks for your help.

  Hi RonGerdes,

  1. where to find two entries for service pack 2 on the computer?

  2. Since when are you the bluescreen or constant freezing on the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then check the event viewer to determine the cause of the blue screen on the computer and post back with the details.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  The recommended method for uninstalling any program using the Add/Remove programs in the control panel or by using the uninstall program provided the program provider.

  First, you must uninstall the program by using the Add/Remove programs in the control panel and later, you can remove the program files folder.

  How to manually remove programs from the add tool / remove programs

  http://support.Microsoft.com/kb/314481

• Why does my system said service pack 1 is installed, but he always tells me to install an important update that? service pack1

  my system downloaded and installed service pack 1, yet auto update keeps popping up telling me to instal it?

  Hi Jerry,

  1. How have you installed service pack 1 before? Is it through Windows update?

  2. have you checked the Windows update history?

  Check if the Service pack is already isntalled on the computer. Follow the steps.
  1. Right click on "computer".
  2. In the system of the Details check if section Serivce pack is mentioned.

  If the Service pack is not installed, then you can download the stand-alone package for Service Pack 1 and install.

  See the article to download the stand alone Service Pack 1, and then run the installation.

  Windows Vista Service Pack 1 five language standalone (KB936330)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30

  You can verify if the service pack is installed in Windows update history.

  Reference:

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-in/Windows-Vista/see-which-Windows-updates-are-installed

  Hope this information helps. Response with status so that we can help you.

• Windows Vista Service Pack 4 upgrade errors - Error Codes 643 and D59

  original title: errors for Service Pack 4 Windows Vista update - error code 643 and D59 - I do not KNOW WHAT to DO!

  Windows Vista Service Pack 4 upgrade errors - Error Codes 643 and D59

  I DON'T KNOW WHAT TO DO!  I tried what he suggested, but cannot cross the error codes!  I am upset and frustrated because I can't work with the internet without slowing down.  I then close, only to have start all over again EVERY time!

  My internet keeps acting like dial upward because of this and I have cable internet!

  Help, please!

  This day SP4?

  Only in appropriate cases:

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Just in case where it is .NET Framework 4 -

  You can try the case just only repair the .NET Framework versions affected, especially if only .NET Framework 4 is involved.

  To repair the .NET Framework 4 Client Profile or .NET Framework 4 extended etc. -.

  • Click on start/Orb and click on Control Panel.
  • Go to the program and features.
  • Locate the Microsoft.Net Framework 4 Client Profile or .NET Framework 4 extended, right-click.
  • You should have the choice to repair or uninstall/change, click it.
  • This will then give you the opportunity to fix it
  • Select the repair option.

• can not get netframe work 3.5 service pack 1 to install always get an error code ox643

  I have a hp windows xp x 86(32 bit) media center 2005, I tried for about 3 to 4 weeks to get to dragon speaking naturally premium to install on the computer > it will not install because it says I have to install netframe work 3.5 SP1 in order so that he can install it. . When I try to install the netframe 3.5 I get a code error message 0 x 643. Is it possible to get the netframe work 3.5 service pack 1 to install when the netframe who entered the computer is part of the operating system. I tried to eliminate the netframe 1.1 work with the system, but also many other programs is tied to it and would not be able to serve.

  HELP PLEASE!

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  If necessary:

  Order of relocation:

  1. .NET framework 3.5 SP1 (this will install the .NET Framework 2.0 SP2 and 3.0 SP2)
  2. .NET framework 1.1 (if you have all the programs installed in need, this blog helps you decide whether or not you need)
  3. .NET framework 1.0 (if you have all the programs installed in need, this blog helps you decide whether or not you need)
  4. .NET framework 4

  For more information, please visit: http://blogs.msdn.com/b/astebner/archive/2010/12/22/10108400.aspx

• Which Service Packs I have install during the installation of operating system?

  I intend to do a clean install of Windows XP Edition family on a replacement hard drive.  At this hour I'll also install updates recommended.  Should what Service Packs I install?

  Microsoft sites are ambiguous or incomplete information.  From my reading, it seems that I need to install the Service Pack 1 or Service Pack 2 to install Service Pack 3.  And yet the Service Packs are supposed to be cumulative updates, containing all updates released before the release of the latest Service Pack.  Have to install only the Service Pack 3 would be my preference, which would do the trick.

  What installation plan would give me the desired result (a nice, clean, full of XP and all installation updates recommended) more effective in terms of installation time and using the hard drive?

  After installation, remove the files?  It seems to me (and perhaps I got wrong this impression) that the Service Pack and the individual updates of XP I have installed in the past have left a huge amount of files on my hard drive, the files after successful installation, I might be able to remove without adverse consequences.  My feeling is that Microsoft (and many other reputable software providers) are happy to add you to their software, but they clean up after themselves.

  If you hired a Carpenter to build new cabinets in kitchen at home, he would not let the old cabinets, scrap lumber, loose nails and screws and tools scattered in your kitchen.  It would be to clean up all this in the context of completing the work.  I don't want to be unfair to Microsoft (in case I'm wrong about what they leave on my machine), but if they leave their installation files or obsolete older files (from earlier and now supplanted the Service Packs) on my machine, they are not complete the project.

  Your advice on what to install and how to clean up after installation will be appreciated.  Thank you.

  You must download and install Windows XP Service Pack 3.  Afterwards, visit Windows Update and download available later updates. Carey Frisch

• Windows XP Service Pack 2 is installed correctly, and then on reboot I get a blue error screen or green

  Windows XP Service Pack 2 is installed correctly, and then on reboot I get a blue error screen or green.

  The only way that I could finally restart, was safe and then I restored to before I installed SP2.

  WinXP SP2 must have been installed more than four years ago.

  If you haven't installed SP2, you could not possibly have a functional application of the antivirus installed so see...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State course: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  Wish I had better news for you.  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Is it acceptable to ignore service pack 2 and install service pack 3 instead?

  Can you install service pack 1 and service pack 3, or is it better to install service pack 1, service pack 2 and service pack 3?

  ·        SP3 is cumulative, so that users can install SP3 on Windows XP SP1 or SP2.

  ·        You can run the package of SP3 update on any edition of Windows XP SP1 or SP2. For example, you can run the package to update SP3 on a computer that is running Windows XP Media Center Edition with SP1. The exceptions are for XP Embedded editions.

  ·        Windows XP SP3 is for x 86 only versions of Windows XP. The x 64 editions of Windows XP were serviced by Windows Server 2003 SP2. For more information, go to Windows Server 2003 Service Pack 2.

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Some third-party programs can make a change in functionality after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947309

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

• Why Microsoft definition security updates and Service packs several times installing them selves?

  Why Microsoft definition security updates and Service packs several times installing them selves?

  Each definitions update is KB915597.

• Service Pack 1 & 2 installed successfully but not displayed

  I had to install Windows Vista Home Premium on a new hard drive.

  I then installed 102 updates, including service pack 1.

  I then installed service pack 2.

  When I look at the properties of the computer, it shows only Windows Vista Home Premium, but not the correctly installed Service Packs

  Hello

  • Are you able to see the service pack 1 and 2 in the Windows Update list?
  • It she even offered to be installed again?

  I suggest you install service pack manually.

  Here are the links:

  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  http://support.Microsoft.com/kb/935791

• LabView 2009 Service Pack 1 does this cause a problem with the MAthScripts for lo

  All,

  I just installed Service Pack 1 for Labview 2009.  All of my code that loops in my MathScripts now lets my MathScripts does not compile.  Have a clue what I do?

  Thank you

  Rich

  Windows XP (32-bit)

  LabView 2009 uninstalled, reinstalled after you have removed all files related to 2009.  SP1 installed, then applied for LabView and MathScript.

• Standalone update Windows Vista service pack 2 32-bit does not update because of missing files in service pack 1.

  Original title: lack of vista service pack 1 files

  updated standalone service pack 2 32-bit tells me he does not update my copy of vista 32 with service pack 1 installed. due to the missing files in service pack 1. Windows update says all updates, including service pack 1 are current and accurate.

  Hello

  What is the full error message that you receive?

  Method 1:

  You can see the KB article to reset the Windows Update components and check if you can install the stand-alone package of Vista Service Pack (SP) 2.

  How to reset the Windows Update components?

  Method 2:

  If the problem persists, then you can try the steps in the following article and check if this can help:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  Method 3:

  You also, try to run a SFC scan to check all corrupted files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

• Music: How can I transfer all of the music files to another user account

  How can I transfer all of the music files to another user account

  In simple terms, simply copy it to an external drive and then copy them back as the other user.  If files are protected by DRM (Digital Rights Management) as iTunes from Apple or Napster, you will need to know your service music, if the files can be copied.

  "rstoyka" wrote in the new message: * e-mail address is removed from the privacy... *

  How can I transfer all of the music files to another user account

• Jerky mouse mouseover function for all while the menu (file, options, help) and the key back/forward/home too. More scrolling is choppy every Web site.

  Jerky mouse mouseover function for all while the menu (file, options, help) and the key back/forward/home too. More scrolling is choppy every Web site since the update to version 3.6 to 4 RC1.

  Gel mouse pointer when it comes across objects that use some sort of animation or gradual highlighting when hovering on (which is basically all the Firefox 4 items menu, tabs, etc.) But also a lot of things on the Web pages as the green buttons on this page that change color when you hover over them).

  After rebooting my system, however, the problem seems to have disappeared!

  [, WinXP SP3 - 4 GB RAM, Core i5 M520, driver Nvidia NVS3100M 6.14.12.5738, Firefox 4.0]

• Write a string and an integer and a table all in the same file?

  Hello

  I am currently it several different types of values with LabView.

  I have a shot, a few numbers and several paintings.

  Thus, for example, I have a timestamp of the chain, several values of "integer" amplitude of the signal for example, RMS value, frequency and I have several paintings - table of signal, the FFT (PIC and location) values.

  Basically, I'm trying to find a way to write all the values in a single file. I can write all the individual types to separate files (so I can write the RMS, amplitude and frequency to a single file, some of the tables in the other)
  but is it possible to write a string and an integer and a table all in the same file?

  Pointers would be much appreciated,

  Thank you

  Paula

  Your file will be all text... any format in a table of text, to build as a single table, "table chain worksheet", to write to the file.

  (I'm sure this has been on the forums before... a search it would have thrown upward)