Several network connections and network #2

Similar Questions

• 3 local network connection and local network connection

  I have a Dell with Netgear router wireless. On my computer, I have two connections to the LAN. 3 local network connection and local area connection. When I activate 3 internet works on the computer, but the wifi does not work. When I activate the connection to the internet LAN doesn't work at all. someone know how to fix the wifi?

  What else shows in network connections (start > run > ncpa.cpl > OK)?  Please list all icons.

  On the Local network connection, right click and select Properties.  Which shows in the 'Général' tab in the box under "connect using"?

  On Local Area Connection 3, right-click and select Properties.  Which shows in the 'Général' tab in the box under "connect using"?

  • With both items enabled, open a command prompt window (start > run > cmd > OK).
  • Type the following command in the black command prompt window and press ENTER after each line

  ipconfig/all > "% userprofile%\Desktop\ipinfo.txt".
  Notepad '% userprofile%\Desktop\ipinfo.txt '.

  • Copy the contents of the Notepad window and paste it into your reply here
  • Close Notepad and windows command prompt and remove the file ipinfo.txt to your desktop

• Re-installed Windows XP and now I can't see the network connections and cannot get online.

  Our pc is down a few days ago, so we reinstalled xp.  The xp upgrade.  Now, we show no internet connection and can not get on the net.  Our Device Manager indicates a problem with the drivers being not downloaded on the network adapters.  Also the modem is not recognized when I try to connect. I tried to download the fix for me on microsoft for a flash player and it did not work.  Can you please help me reinstall it?  Thank you

  original title: reinstalling Windows XP

  Go to your computer manufacturer's support web site and search for the Windows XP drivers for your specific model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and install them all, starting with the card mother/chipset drivers, LAN, Audio, USB, SATA, etc, and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

• The network icon shows not connected, but in reality I'm connected and can browse internet.

  Network icon does not display connected

  The network icon shows not connected, but in reality I'm connected and can browse internet.

  Could grateful if someone let me know what could be the reason.

  Thanks in advance

  Hello world

  I had the same problem and I solved it by unplugging my pc to the modem, wait about 30 seconds and reconnected. This means that if you do the same thing with your network adapter problem could be solved. Try this option, you will not lose anything

• My laptop displays connect to WIFI but doesn't connect and lists of unidentified network

  I use Vista on my laptop and recently changed my Netgear WIFI bridge.  I added the bridge, but when I go to connect it says connected but not connecting, and lists of Undentified Network.  I googled this problem and cannot find a solution.

  Hello

  1. you get any error message?

  Please follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Also check out the links below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

• In the Internet properties and connections and the local network settings, I uncheck the box for a proxy server, but in a few moments, the computer checks the box

  In the Internet properties and connections and the local network settings, I uncheck the box for a proxy server (because it is blocking my access to Internet Explorer), but within moments, the computer checks the box. What can I do to stop the area of the check proxy server box?

  original title: LAN settings

  Have you checked for viruses?

  http://www.eset.com/us/online-scanner/

  It is very common that the virus to do.

• BlackBerry smartphones "Blackberry App World is had problems to connect to the server Blackberry App World. "Check your network connections, and then try again.

  Whenever I try to access an application, appworld is a site of the company that send me to appworld I get this error.
  "Blackberry App World is had problems connecting to the server Blackberry App World. "Check your network connections, and then try again.

  I have loaded the bb appworld re have the latest version for my new bb bold 9900, but still the error and then lock up. Power off, and get a message that I had an unknown error.

  People have had this problem since 2010. I never had this problem with my flashlight or my 9000 "BOLD".
  Anyone know what is happening? I also have the latest OS on my 9900.

  Found a solution! Laughing out loud! How delayed. I changed my email in bb code. For example, after changing from one gmail to another account, I changed it back and baaammmm! Problem solved, but do not know why it should be a problem in the first place right?

  Good luck to you guys who do not have the possibility of returning to another email.

• Ad Hoc network. even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  I'm living in a college dorm and only have access to the internet via a hard line to my computer. So I wanted to give my other accessibility of consumer electronics set up an Ad-Hoc network and share the internet connection. When I originally set up the network it works fine, but after the devices go to sleep or I leave the room it stops working. I had problems to keep the internet connection to share continually, which I fixed it. I then had a DHCP problem with the hard line that has been resolved through troubleshooting function. Now, even if the network is active and is connected to the internet my devices cannot connect and then the network shuts down.

  Is there a way to create an Ad Hoc network that works similar to a wireless router, so when my computer is turned, it works automatically? If so, how can I make this happen without these problems?

  Hello

  I suggest to activate temporarily the antivirus as well as windows firewall and check if it helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  For reference:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Note: The notes section through the link above.

• I am trying to download revisions and I get this notice: access using your AdobeID has expired. Check your network connection and try again.

  I am trying to download revisions and I get this notice: access using your AdobeID has expired. Check your network connection and try again.

  Hello

  Please try the suggestions in the link below one by one and I'm sure that you will be able to solve the problem.

  I can't Adobe Business Catalyst. When I publish my site to my testing with Adobe Business Catalyst site, I get a message that I was out. What is going on?

  Kind regards

  Vivek

• Several networks on Time Capsule

  Can someone explain to me why I have several networks? I went through the Airport utility, and I find myself with 5 networks. I understand the 2.4 GHz vs 5 GHz, but it seems to be confusing to some of my mottos (xBox, Wii, etc.). Thank you.

  

  You do not tell us how many airport routers, you might have, but it looks like you have 3 devices... unless you named the guest network the same as your main network.

  Recent versions of the airport are simultaneous dual-band, so they produce a signal Wireless 2.4 GHz and 5 GHz with the same network name.  So, it's 2 networks for a router.

  If you have a second airport, set up to extend or expand the network, then it too will be 2 networks with the same wireless network name. So, it's more than 2 networks for the second airport... for a total of 4 so far.

  Pourriez you have a version of a band unique AirPort Extreme or AirPort Express. So it's 1 over the network.  Or, if you have a recent version of the airport, the scan did not pick up the 'other' network at the time.

  Total... 5 networks.  Quite normal.

  Wireless devices choose the router with the signal the harder... at least in theory... then choose 2.4 GHz or 5 GHz according to their abilities and the distance to the airport.

  Of course, a feature which is 2.4 GHz only will connect to the 2.4 GHz network, then... in theory... it will choose the strongest signal 2.4 GHz of the nearest router.

  If a device can connect to 2.4 GHz or 5 GHz... It will be connected to 5 GHz, if it's in the same room or in immediate proximity to the router. But as signals of 5 GHz are much lower than 2.4 GHz signals, the same device will connect probably in 2.4 GHz if she moves a piece or two away from the router.

• Need help solving any internet connection. This happened to me several months ago and the supplier

  Need help solving any internet connection. This just started today, but it's happened to me several months ago and at that time the provider thought it was software related and suggested that I have to contact HP. I have a HP 2006 m7674n, Windows XP. For several days, I worked with HardBeatZ on a different issue that has been resolved today. However, for several days, I had been working msconfig to track down the cause of the problem; This resulted in several reboots the computer - this would have something to do with it? Also, I just started getting a RUNAS box popping up. HardBeatZ has provided a link to a possible solution to this, but since I can't do internet connection I can't get the fix. Right now I'm on a laptop with Wi - Fi for the same service internet/modem as my PC. I changed nothing onmy PC in the last days of several for the internet connection or services.  I always use eithernet connection from the router to the computer. I tried Wi - Fi today with my PC but not connect. I tried to unplug the router and reconnect but it does not solve the problem. I did a Network Diagnostic and printed the report; Here are the warnings and error messages in this report:

  1. under the terms of the bridge diagnosis; Warning: "www.microsoft.comcould hostname not be resolved (0x2afc error code). Could be the gateway or DNS problem.

  2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »

  3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: ' 12007 connection error at www.microsoft.com: the server name or address cannot be resolved. " and the error was unable to establish a connection.

  Still under network adapter diagnosis; It shows the connection status of network as "connected."

  Also, I have an older computer that I connected with eithernet and was able to connect to the internet but has been disconnected because the version of Windows is too old to support the connection. But I could briefly connecting on HP website before you log out. The point being I think it's a computer problem and not an internet router or provider problem.

  I read a few entries on this site and it seemed that the recovery of the system was the only solution. I hope that there are other things to try before I resort to that.

  I would appreciate any advice on the steps to diagnose the problem and insight as to what may have caused this to happen. Thank you. dt2012

  Sorry... still with you... OK, we know that your network card is good and we know that your first post;

  1. under the terms of the bridge diagnosis; Warning: 'host www.microsoft.com name could not be resolved (0x2afc error code). Could be the gateway or DNS problem.

  2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »

  3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: "error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved." and the error was unable to establish a connection.

  4. still under network adapter diagnosis; It shows the connection status of network as "connected."

  For me, it seems that Internet Explorer is corrupted or damaged. Your computer is shipped with Microsoft Windows XP Service Pack 2 Media Center Edition 2005 but since you can have updated to XP SP3 or upgraded to a newer version of Internet Explorer. Please try the options listed in this document to Microsoft titled "how to reinstall or repair Internet Explorer" , since there are several options depending on your system configuration, please post if you need help to solve your problem.

• Several network detected in Windows 7

  I just installed Windows 7 RC. It is perfect to the I n the Network and Sharing Center, several networks are mentioned with one of them being an unidentified network. So, I can't connect to the internet.
  Please help me

  Thank you..
  I solved...
  It happened because of the Hello Service

• Apple Remote Desktop (3.8.5) on several network interfaces

  Location:

  Running Office at distance between an iMac and a Mac mini, both running up-to-date El Capitan.  ARD version 3.8.5

  Both computers are on two networks, the WiFi network including the internet connection and is therefore "primary" and a wired machine-to-machine ethernet connection.  WiFi and ethernet are on separate subnets.

  In Didier, ARD 3.8.4, the Remote Desktop on the Mini app would announce (on Hello) as 'Active' wireless and wired interfaces, and from the iMac, I could choose who I want to use.  Usually the cables, connection gigabit ethernet to reduce network activity on WiFi.

  After these two machines 10.11.2 and ARD 3.8.5, update the Mini looks like 'Active' on the WiFi connection and 'offline' on the connection wired and is the remote desktop will not connect via the wire link. (no change with 10.11.3)

  I tried all combinations of options, I could think of to try to force the 3.8.5 on the Mini ARD announced as 'Active' on the wired connection.  Until beginning with no network connection, at all, on each machine, with all remote management and sharing turned off, re-boot both systems and leaving the disabled WiFi connection.  All to nothing does not.

  Paradoxically, file sharing works great!  It's just the Remote Desktop/screen sharing (Yes, I tried also, all possible combinations) will not announce or connect to the wired connection.

  When the two networks are active, sharing on the Mini preferences show the IP address for the primary network (WiFi) as well as the name (Nimitz.local) of the computer.  However, if the WiFi connection is not active there is no IP address displayed and the ".local" does not appear in the name of the computer.  It appears as just "Nimitz" not "Nimitz.local".

  I went through all the / library, folder ~ / Library, looking for whatever it is possibly connected to this issue.  I opened the files, checked the files, replaced the files and deleted the files without result.

  So my question is: how to do Remote Desktop or screen sharing to connect to the wired interface?  I'd rather not try and go back to Yosemite and ARD 3.8.4 if possible.

  Thank you for your patience!

  Kyle

  App for screen sharing, it must use the wired connection if you Set 1) Ethernet on your system of Viewer to be the first interface in system preferences-> network-> gear-> Service order icon set... and 2) to connect to the target by its IP Ethernet address. Remote Desktop is the MAC address of each computer and combines the addresses into a single entity. Most likely, the second computer that shows 'offline' is a file incomplete or dead. I would like to delete it. ARD promotes the address who has worked both previous. In theory, you can turn off WiFi and connect once via Ethernet and it will remain.

• Several networks of power line can exist simultaneously in the same electrical circuit?

  Several networks of power line can exist simultaneously in the same electrical circuit?

  Thank you

  Yes, as long as you change the encryption keys can have simultaneous powerline of the networks.

  If two units with the encryption key "HomeplugAV" does not connect with two other units with the encryption key 'HomeplugAV2', but the two pairs will work independent of each other.

  Hope this helps