Several screens

Similar Questions

• Bug in several windows in the finder with several screens

  When you use finder on several screens (with separate spaces) there is a problem when you enter fullscreen.

  Steps to reproduce:

  1. open finder on a screen.

  2. open another window in the finder on a different view.

  3. full screen or finder window (any).  You will be able to observe a Visual problem where the finder window that you do not use maximizes and enters full screen then go back to normal, just before the finder window you use between full screen.

  4. at this point your finder window full screen is missing in the top navigation bar.  To reveal it, open your mission control and the space finder-click and you will see.  Basically, the navigation bar is on the finder space expanded while the rest of the finder is on office space.

  5a. If you try to exit the full screen, your finder window will freeze.

  5. before going back to full screen, if you go to the mission control and drag your space viewfinder on the screen where your other window finder is currently on, you will be able to leave the full screen and the finder window will not freeze.

  Cause of the error:

  Still, the problem occurs if the following conditions are met:

  -You have two or more finder windows (if you have only a window of finder, you can always expand it without any problem)

  -You maximize a window of finder, and it's the only finder window on that office space

  For example, if you have three screens and you have 2 1 1 finder windows in offices respectively, you will encounter the error when you maximize the window of the solitary finder on the monitors of 2nd or 3rd.  Maximize a window in the finder on the first monitor has no questions.

  Please try to reproduce.  I hope that it is easily reproduced on any machine and I hope this will be fixed as soon as possible.

  Can not repeat to aid by end 2013 15 "rMBP and Asus 24" external display connected DisplayPort cable.

• Vista on Qosmio G20 - impossible to activate several screens

  Hi all!

  I have a QOSMIO G20, and I put on him, with very hard work, WIDOWS VISTA ULTIMATE.
  Everything work ok, just one thing make me in trouble... I have a Gforce GO 6600 graphics card and when I want to activate SEVERAL SCREENS, don t want detect my TV.

  I try to change your driver, but Vista say NO, this IS THE BEST DRIVER.
  I'm trying to change all the options in the NVIDIA Control Panel... nothing!

  Please, I need help! Maybe my graphics card is damaged? Is too old?
  When I connect the laptop with TV, I have sound on TV but no picture.
  All ideas are welcome and thank you!

  >... and when I want to activate SEVERAL SCREENS, don t want detect my TV.
  Can you please describe to us what you want to do exactly and how do you do that?

  It's a running application when you try to use several poster?

• Optimization of memory with several screens

  Hello

  I have several screens in my application and each screen has a few custom controls and bitmap images.

  When I move from one screen to another screen, I have more need not old screen. What is the best way to completely eliminate the permeable screen? I also want to eliminate all objects created by this screen as well.

  I had a deep look in the forums and books, but I can't find or think of a good solution.

  Your help will be very appreciated.

  Thank you

  Nitin

  By defining a null object is not the same as references - definition of a null reference only removes only one reference.

  For example, if you create a field, add to a Manager, then the reference to the null field, then your code is no longer refers to the field.  However, the field is still referenced by the Manager.

• Manage several screens like Ubuntu desktop

  Original title: as the screens get bigger and multiply, how do you manage windows with just minimize, maximize, restore and half horizontal splits?

  More details here:

  https://Twitter.com/DeveloperLetter/status/339843994219597824

  https://Twitter.com/WindowsSupport/status/339847731856146432

  Without going all Ubuntu or several desktops, there must be a way or allowing users to carve up the screen real estate or offer other options such as snapping two-thirds or one third of the screen.

  Google Chromebooks have begun to move in this direction, although there is much to be desired in their implementation of beta - as current.

  Tim

  13 142 days

  P.S. There is no Windows user interface subcategory under Windows 7 here.

  Hi Tim,.
   
  Unfortunately, these are the only features that are available on Windows 7 to manage several desktop on the computer screens.
   
  However, you can use your favorite search engine to find third party software to display multiple screens, as you can do it on Ubuntu.
  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  Please let us know if you need other help on Windows. We will be happy to help you.

• Several screens do not work at all (host OSX with guest OSX)

  I have a lot of Mavericks, and I am trying to run any version of Mac OS x in a virtual machine on that host, while retaining several monitors. OS x 10.8, 10.9 and 10.10 guests could not give me more than 1 monitor. I repeated these tests with a crowd of Yosemite, with no luck either.

  It seems to me that it is a problem of Fusion, is not a problem of OSX config.

  • Multiple monitors works very well in a guest of Win 7 on the same host machine (excludes the host machine spaces configs)
  • I expect that if the merger was exposing all of my monitors prompted OSX, OSX comments would have at least some information via the display/prefs system that monitor the most a are attached to it. The guest seems to think he has only 1 monitor.
  • When I switch single mode window to full screen (IE, 'use all monitors') in Fusion, Fusion logs seem to indicate that it configures 1 instructor for the guest, where I expect to see 6:

  2015 02-17 T 18: 43:36.762 - 05:00 | vCPU-2 | I120: Guest: svga: SetMode: mode w, h = 1920, 1200 bpp = 32

  2015 02-17 T 18: 43:36.764 - 05:00 | vCPU-2 | I120: Guest: svga: SetMode: height = 7680

  2015 02-17 T 18: 43:36.764 - 05:00 | vCPU-2 | I120: Guest: fb: setDisplayMode: view ID = 1, ID = 0 depth

  2015 02-17 T 18: 43:36.764 - 05:00 | vCPU-2 | I120: Guest: fb: setDisplayMode: LxH = 1920 x 1200, bpp = 32, height = 7680

  2015 02-17 T 18: 43:36.765 - 05:00 | vCPU-2 | I120: Guest: fb: setDisplayMode: (1) LxH = 1920 x 1200, 32 7680

  
  

  • Despite this datapoint, merger seems to know that I have 6 screens.

  VMware.log:2015 - 02-17 T 18: 23:19.502 - 05:00 | MKS | I120: Topology display current: 6 screens, size (5760 x 2400), scale 1 limit.

  VMware.log:2015 - 02-17 T 18: 23:19.517 - 05:00 | VMX | I120: SVGA: topology display Maximum 9600 x 3200.

  • I tried changing the VMX settings to disable the Monitor autodetection here; no change: VMWare Fusion 7 / 3 displays not supported?
  • I checked my VMWare settings indicate to use every screen mode full screen
  • I checked that the configuration of spaces my host has "Screens have separated spaces" is disabled (However, I tried both ways).
  • I don't get even cloned monitors in my comments; the client gets just 1 of 6 monitors.

  VMware Fusion help > understanding VMware Fusion > crew Action and dealing with the Interface of VMware Fusion > using multiple screens

  -Use all displays in mode > full screen:

  «Use of all displays in mode full screen is not supported for Mac OS X clients.»

• The use of several screens with the iMac (late 2009)

  Despite a few good support here to support the communities I'm unfortunately still not able to use my 2 Macs the best average.

  When you use the 'Cmd F2' keys on the main iMac everything seems ok, but the iMac display is at the head and

  When I press Cmd-F2 on the iMac screen only the bottum menu bar appears...

  Anyone know what are the exact steps to follow?

  What to start first?

  Thank you!

  I'm confused as to why you started another thread. Your original-> thread screen connect 2 iMac (late 2009) with mini DisplayPort

• Qosmio F50 - 10Z - use of several screens

  Hello world

  I have a F50 - 10Z and various uses for a multi-screen configuration, not less of my work as a literature student.
  Have at least two monitors by hand is very useful for writing the essay, I use one screen for the source material and the other for OpenOffice. In my downtime, I still prefer a multi-screen for photo editing configuration and the very small handful of games that support multiple monitors. I have to put it back the following:

  Laptop screen, screen 15.4 "capable of 1280 x 800
  Two Proview MA - 982KC 19 "TFT capable of 1280 x 1024, the surplus of my old office
  A Samsung 40 "LE40A656 LCD HDTV capable of 1920 x 1080

  I already know that I can connect either one of the monitors or TV and create an extended desktop, which I am at the present time, by aligning the monitors correctly in the Windows settings, which works surprisingly well and blew up between the very easy monitors. Otherwise I also know that I can have a monitor and TV is connected at the same time, creating two larger workspaces, the laptop can provide. What I can't do, is create a tri - or quad-monitor Setup. I would like to be following Office configurations, I set out that they would physically be in the Windows settings:

  Laptop TFT TFT

  _ TV
  Laptop TFT TFT

  My main concern is the work area. Toshiba DynaDock seems the most sensible option. Its extra VGA port would allow me to launch the first setup (TFT, laptop, TFT)? I appreciate the DynaDock is unlikely to support multi-monitor games, and I therefore also examined the Matrox Triple Head digital 2 GB. Now that the DynaDock seems very affordable, even if only as a medium-term solution.

  Provide a port replicator specific Qosmio Toshiba? I note that they exist for the other beaches, but they do not seem to a port replicator Port Qosmio from what I see. If they did, the DVI and VGA ports on a Port Replicator would be usable at the same time, allowing your desktop quad-monitor?

  I would be very grateful for any help you can provide.

  Concerning
  CorporalG

  Hello

  I think that there is no need to write much. On your Qosmio, you can connect an external device. TV or external monitor. If you want to use more than you need of external device like Dynadock.

  So the answers to your questions:
  * Toshiba provide a port replicator specific Qosmio? *
  NO.

  *.. commandeer the DVI and VGA ports on a usable Port Replicator simultaneously, allowing your desktop quad-monitor? *
  Just for example: on the Toshiba port replicator, you can use a video output port. It is not possible to use two different video ports on the Port Replicator at the same time. The video signal can not be cut.

• Several screens on iMac mid-2007 with the Mavericks os

  

  It's the back of my computer (an iMac mid-2007 of 20 ") and it is running on 10.9.5 Mavericks.

  I think that the port farther to the right is a mini displayport, but I don't know because I had a mini displayport to hdmi adapter and it does not extend to the bottom of the socket and also wouldn't keep the Hdmi cable in it. I want to add my Samsung TV as a screen for my computer. Is this possible? How can I do it in this case?

  Hello Peartree327,

  I appreciate that you try to get your iMac to have TV as secondary display. Return to what you can do to get this working.

  This port for the video on the right is going to be a Mini-DVI port. You would pair that more a DVI to HDMI Cable, you should be able to get the video to your TV. Take a look at the articles below to review the techniques and information on the cards for you help to iron out.

  iMac (mid 2007) - technical specifications
  https://support.Apple.com/kb/SP16

  Apple video adapters and cables
  https://support.Apple.com/en-us/HT201853

  Apple Mini-DVI to DVI

  Part: M9321G

  Compatible with:

  • MacBook (13-inch, mid 2009)
  • MacBook (13 inch, early 2009)
  • MacBook (13 inch, late 2008)
  • (13 inch, early 2008) MacBook
  • MacBook (13 inch, late 2007)
  • MacBook (13-inch, mid 2007)
  • MacBook (13 inch, late 2006)
  • MacBook (13-inch)
  • Mac mini (late 2009)
  • Mini Mac (early 2009)
  • iMac (early 2008)
  • iMac (mid 2007)
  • iMac (late 2006)
  • iMac (early 2006)

  Belkin HDMI to DVI - D (2 m/6.6 ft.)
  http://www.Apple.com/shop/product/HHM62ZM/A/Belkin-HDMI-to-DVI-d-cable-2-m-66-ft

  Take care.

• I have several screens with different resolutions, how can I make work stations match from the bottom rather than the top?

  I have 2 screens at 1920 x 1200 pixels and one in the middle with 2560 x 1600.  When I move the cursor from one screen to the other, the cursor jumps (of course), but in this case, the vertices of the monitors are (it moves from the top of a monitor to the top of the other) and I would like the background to match (to the top of the Middle monitor space with no corresponding areas on the other two).

  As the two side monitors are physically smaller and shorter that the Middle it's jarring to see the cursor jumps 3 inches upward when I switch from one to the other.

  Is it possible to adjust the display settings so that they justify bottom instead of the top?

  To be clear: I want to be able to move my cursor along the bottom one down the next and having the high bit to space rather than being able to move the cursor along the top with the bottom being the extra space.

  Thank you
  Trish

  In the window display settings, where it shows the monitors, click and drag them to the bottom of all monitors line up horizontally. Boulder computer Maven
  Most Microsoft Valuable Professional

• Photo Screensaver with several screens

  I have long used both monitors (such as extended desktop) and the slideshow of pictures my Windows XP as the screen saver and a great way to enjoy a collection of ten years of family photos. I could not make the offerings of Windows 7 to use two monitors; only the main shows of photos, the other is dark. Someone has found a way or software that uses the full desktop; i.e. both views. Both computers have the NVIDIA graphics card.

  Hi all

  Thanks for that bring to our attention. There was an error with the message is marked as an answer in this thread, and our process now include additional measures to help prevent this from happening again.

  The problem addressed in this thread about the screen saver picture showing only on the primary monitor and Windows 7 works as expected. There may be some third party software that allows a photo screen saver to display on multiple monitors.

  If you wish to leave a comment for Windows 7 and request this feature in future versions, you can do so here.

• How to open several screen together in 10 Blackberry like on the page on my current application

  Hi all

  I am currently the application design in which there is a button action as assistance or to this date.

  When I click that button, I did the implementation such that he calls an other html.

  With the help of bb.pushScreen

  When I came back from About.html it will load the previous (main.html)

  but in this way the setting values and current variables are lost in main.html.

  There are many apps that do as they can slip on the dialog box as see main application together.

  Is it sort of wrong to broadcast any dialogue on Main.html main.html still works when I close any dialogue.

  Please help me!

  Thank you

  GBA

  I think I understand 2 questions in what you describe.

  1. you have the data loaded into your default main.html page and if it is changed by the user, it is not present when it is reloaded? You can get around this by having a global data or using localStorage object. In the function onscreenready in the index, you can update the values of your fields of data using the data in your global object or variable localStorage. If you look at page options of the sensors sample, you will see an example to have a screen to update objects screen with values of global data loading. https://github.com/BlackBerry/BB10-WebWorks-samples/tree/master/sensors

  2. you want to implement the gesture of glance in your application, so that you can slide the screen to the right and see a bottom at the same time. This feature is not included in the current bbUI.js. You can try to add in there, but we don't have any samples for her.

• Taskbar Windows 7 which extends over several screens

  Is it possible to extend the taskbar windows 7 on 2 or more screens other than to cross the taskbar using third-party software such as ultramon? It would be nice to have the aero peek on my second monitor feature.

  No, he has not taken native support for Windows 7 RTM for spanning the taskbar on multiple monitors. You'll have to depend on a third-party utility such as Ultra Monday Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• Position of the alert in Illustrator on several screen machine box

  Hi - I have a little boring with an alertbox.

  I have an additional screen connected to my iMac and when I have fx close a document I have Illustrator, the warning box (.. .except changes?-box) appears on the 2. display - path left of my workspace in illustrator. Please help - it should be an easy fix somewhere?

  Thank you

  ++ Michael

  OK I solved it - I simply disconnected the 2nd display while I opened and closed Illustrator :·)

  ++ m

• I want to run a SWF in several screens, is - it possible a .swf can divided into different part and meet

  I have a flash file, I want to split application in 4 different part and individually run on 4 different screens (monitors o/p). If this is then can not possible I develop 4 rows of 4 different screens, but how they can jointly associated with one application.

  I have the application developed in Adobe Flash CC but no problem to switch technology. Please suggest...

  Thank you

  Maury

  Yes, you should be able to do it with a bit of CODE.

  Apply a transformation scene (scaleX = 2, scaleY = 2) and change the x / y position corresponding to higher positions left, upper right, lower left, lower right.

  The export of 4 different sovereign such as each of them show only a quarter of the original film after processing and implementation in different points of view.