Shadow on Qosmio G30 screen

Similar Questions

• Qosmio G30 - screen lock, no keyboard, no mouse action

  I'm getting intermittent problems with my G30 gel (not BSOD - simply locking the screen, no keyboard, no mouse action) and the fan at maximum speed. The only way out is to hold the power button until the machine closes its doors. Reboot is so very well. Sometimes, say, 2 - 3 times a week, with 3-4 hours per day use.

  Not much to go, I know! I looked for the time journal entries he goes and sees nothing strange. I had the motherboard replaced a few months after the video card overheated and dies, so am a bit paranoid about heat problems. The only consistency I can find, is that it happens only when it is connected to the internet... I am running Norton antivirus/internet security, and there is nothing in their newspapers either. There is no apparent consistency when it happens (for example the set time after start instead, executing specific program, etc.).

  Anyone else had this? Sorry I can not more than a fix on the problem, but maybe someone can recommend a way of pinning it down better...

  Jonathan Gibbs

  Have you tried a BIOS update?

• Qosmio G30 - screen remains blank

  Pc guru please show me the age of enlightenment:

  When I turned on the laptop, she had that familiar noise (music) for Window Vista Home Premium in the background and the screen remains blank. I pressed F8 during the newspaper but made no difference (no native mode display).

  Then I put the recovery DVDs and you press F12 by following the instructions in the menu product and still no effect.
  Is there a problem on the laptop - infection by the virus or malfunction of the graphics card?

  This is the first problem since I bought it two years ago.

  Hello

  Is that means the screen goes black all of a sudden without any reason?
  If so, it is difficult to say why this is happening. You can connect an external monitor to the identity of the problem.
  Check it!

  Normally after the installation of recovery everything should work properly. Otherwise, it seems to be a hardware problem :(

• Re: Qosmio G30 and green screen problem

  Dear friends

  I thing is interesting for any owner of Qosmio to look at this:

  http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/comment-page-4/#comment-130784

  http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/

  My Qosmio G30 is already dead, I got an estimate from the official service, to repair my qosmio costs nearly 600 pounds. Is a design flaw. Go on the internet.

  Interesting links! Thank you.
  I have to say then I must be lucky. My Qosmio G30 (German model) works well and without any problems

• Can Qosmio G30-126 - I use the frequency refresh screen, more than 60?

  Hello
  My laptop Qosmio G30-126

  Problem:
  My screen refresh rate is 60. There is an option only "60". How can I show more than 70-75-85.
  Type as generic pnp monitor monitor show

  Thank you

  Hello

  Please check this Toshiba document where you can find an answer to your question:
  http://APS2.toshiba-tro.de/KB0/FAQ35007A001OR01.htm

  Welcome them

• Qosmio G30: blue vertical lines and crash dump blue screen

  I have a Qosmio G30, model No. PQG32C-AV605E with BIOS Version 3.40.
  I want to update 3.90, but I can't get into Windows.

  How update the BIOS without windows available?
  Y at - it a utility BACK?

  If so, please send and I will download it or send me an email on where to download.
  The G30 that I has vertical lines blue on the screen when the computer starts in VGA mode entering into Windows for the first time.

  But the machine can not get into windows, it freezes and dumps and restarts before that.
  I replaced the RAM with new RAM, but it has no effect.

  I ran the diagnostics utility and hard drives are OPTIMAL in RAID 1, so no errors there.
  Reinstalling Windows went well: I can't do it in VGA mode without lines.

  Toshiba technical support told me that an upgrade of BIOS fix it.

  Thanks for any help.

  Hello

  have you tried to plug the external monitor? If it still shows blue vertical lines, the reason is a failure of the graphics card. (You can also reinstall Windows to check the related issue of f it's Os). Otherwise, contact the after-sales service.

• Qosmio G30 - blue screen of death

  recently I had this error on a blue screen when starting my pc (I can't go in either safe mode) so I decided to start from the cd and repair the system, but the problem is I can't boot from the cd or a port USB of my laptop Qosmio g30... the problem is that I tested the cd on my friends pc and it booted from it mine shows the following message
  "During initialization and the link...".

  PXE - E61: Media test failure, check cable
  "PXE - MOF: exit Intel Boot Agent.

  I really need help here and I don't like the data on my c drive, so if there is no solution I would appreciate

  Thanks in advance.

  Which CD you want to use for BONE repair?

  Akuma is right. This message occurs if the laptop can not boot from optical disc or HARD disk drive. Then automatically seek next boot device and it's LAN. This message is typical for the start of LAN (cable not connected).

• Can Qosmio G30-102 - I use it as a HD for my PS3 screen?

  Hello

  I have a Qosmio G30-102 and I wanted to know it would be possible to connect my Playstation 3 via * HDMI *? For the moment I can use only cables AV that's really fustrating. If I can use the laptop as screen for my PS3, using the HDMI cable inform me please how to do that because I tried all methods I can think.

  Thank you

  MB

  Hello!

  Sorry, buddy, but this is not possible.
  You can use t as the screen of the laptop as a monitor. The laptop doesn't have a video input port, there is only for video output ports. This is the reason for this.

  So if you want a HD screen for your PS3, you will have to buy a monitor only. The laptop can be used for this.

  Good bye

• Qosmio G30 - white lines on the screen and BSOD

  1. I have a Qosmio G30
  2 operating system Windows XP MCE
  and I have problem "white lines on the screen ' when windows start to load after that I got the"blue screen of death"and restart the computer.
  I try to get back, but unfortunately came with the laptop recovery CD doesn't seem to work...

  Whenever I finished to recover I have "windows loading files" and once this is done, it shows me the so-called "blue screen of death"...

  Hello

  I m afraid. I have bad news for you ;(
  I think you ve you have a problem with the hardware in my eyes, there might be something wrong with the GPU chip.
  The white lines on the screen could be related to a faulty graphics card and get the BSOD error due to a hardware malfunction or software serious questions

  I m sure that the recovery CD does not contain software problems and therefore only the fault of hardware could be the reason for the lines on the screen and the BSOD.

  In my opinion, you should contact the ASP in your country for assistance if all goes well you guarantee is valid.

  Good luck

• Qosmio G30-204 - how to replace the screen?

  Hi people. I have a Qosmio G30-204.

  The screen to the right corner is not sure as the rest of the 3 corners of the screen.
  How can I tighten again?

  Where are the screws on the screen?

  Hello

  Have you tested the laptop to an external monitor? Perhaps it is not a problem with the monitor and your graphics card or card mother is causing this issue.
  Check it!

  Moreover I replaced didn't a computer laptop screen myself again because it s too difficult and delicate in my opinion. You need to remove a large number of screws and you should be very careful that you n t destroy a part or material of the laptop.

  I think the best way is to contact a local laptop technician you. They can try to help you and they have enough experience for the exchange of material on a laptop computer.

  Good bye

• Qosmio G30 - shaded black lines on the screen

  Hello

  I bought the Qosmio G30-116. Great set, but it is a question. On the bottom of the screen there are two dark outline shaded (the brighter the background color is more wisible it gets.)

  It is very annoying, I bought it mainly for movies. I took it to the shop where I bouth it but they said it is normal and have all the toshiba 17 "screen. But I saw 3 other models with 17 "(qosmio résolution reste la même) and none of them did."
  What should I do? Is it really normal? Thank you

  Puuuhhh. Hey pitorek, it's really not easy to tell if it s a malfunction of the display.
  But I think that this question could be answered by an authorized technician.
  I think you should contact the service partner in your country (I guess you are just the Poland ;)) and explain the situation guys.) I think that you need to send this screenshot.

  Eventually, you will get a replacement. But I put t know if it could be an inverter fault or fl display or something different.

• At startup, Qosmio G30 begins on external screen

  Hello

  I have a Qosmio G30 and my system is Vista ultimate

  This problem
  my pc start up startup on the external display. How to solve?

  Tried to change HWsetup LCD + Analog RGB and the problem resolved now .but my question:
  Before it's selected work fine with default "auo". What happened now? Why must select (LCD + Analog RGB) now! ?

  I format my pc, but does not not with the default selection (selected auo) must I change it manually to (LCD + Analog RGB)

  :(

  > Tried to change HWsetup LCD + Analog RGB and the problem resolved now .but my question:
  Before it's selected work fine with default "auo". What happened now? Why must select (LCD + Analog RGB) now! ?

  HWSetup changes the settings of the BIOS.
  So, I recommend checking the BIOS and configuration of the LCD screen in the first place, and then save the changes to the BIOS.
  In addition, you must use the FN + F5 option to switch to the default option (only internal LCD).

  Last but not least you must check Vista display settings if the external monitor has not been defined for the main display.

  Welcome them

• Qosmio G30 - 102 screen completely disappeared

  I read a lot of messages about the green lines, white spot, and blue screens. However my laptop screen has taken a step beyond that and stopped working!

  I have a Qosmio G30 102. I was playing a game (use high amounts of graphics) when suddenly the screen went. I restarted the computer, but it came with the different colors of the Rainbow (green lines, would change to a completely white screen). The problem was once windows starts to load than the screen turns off. I used the function keys to review the settings of the screen (if you want it to be double screen, connected to the LCD tv), but nothing would work.

  I decided to restart the laptop, but it now came with windows not stopped correctly and gave me the options to start the computer and had pixels all messed up (some letters were missing), windows, put in place would not work after the reboot because the screen turns off.

  So now, the laptop is just left with a blank screen. I can't install windows and my warranty is now sold out (ironically just 1 month ago: S)

  Any help would be appreciated!

  Thank you

  I found these Toshiba update document produced on the Europe of Toshiba page:

  http://EU.computers.Toshiba-Europe.com-> download-> Product Updates & support

  _ + Update: update the BIOS Toshiba Qosmio G30 and the GPU + _ repair program
  + This question is strictly limited to the Toshiba laptop computer model which was produced during the period from January 2006 through June 2007. Except as noted below, any other Toshiba laptops are affected. +
  More details on how to deal with this issue, you will find

  Welcome them

• Black screen with windows to return to the scroll bar - Qosmio G30

  Hello

  I was wondering if someone can help me. I have a Qosmio G30-161 and I encounter a few problems with it right now, every time I close the top of the laptop and leave it for about half an hour that I reopen the form and I get a black screen with a running scroll bar downstairs with the message saying "Resuming Windows to troubleshoot with windows press anyone." I let the scroll bar run its course and it goes back to the screen where it was before I close the lid. Can someone help me this is driving me crazy having to wait for the roll bar all the time, it has only recently begun.

  I also have a problem concerning the closing of windows Explorer. Whenever I do this I get an error message "Error 217", this all started when I installed Norton Anti virus, I uninstalled this product and the problem resolved, I reinstalled norton and the problem came back.

  Anyway to solve this problem.

  Thank you very much.

  First of all can you explain to me what should happen when you close the lid of the display?

  In the settings of power at the moment is chosen the track option: when I close the lid to HIBERNATE. Please check this option on the tab stock setup and choose your preferred option.

  I have no explanation for this Norton related issue. If Norton brand issues I recommend you to use other (better ;)) software.

  Good bye

• Qosmio G30 pink pixels on the screen - what can I try next?

  I have a qosmio G30 on the white parts of the screen were pink pixel in them as well as purple pink pixels around parts.

  In reading the various posts, I have eliminated the graphics chip/card that I can get a perfect image on an external display. The laptop is out of warranty and also out of the extra year for graphics problems, so I tried to fix it myself. I tried all of the solutions below and none have worked.

  I wonder if anyone could give me any other things to try.

  I've updated the BIOS and the display driver - no change.
  I then replaced the motherboard to the LCD connection with a new cable - no change.

  And finally, I have replaced the LCD screen with a new - again no change.

  -Always works fine on an external monitor.

  Any ideas or suggestions would be very appreciated.

  Thank you very much

  Hello

  I think you're talking about dead pixels.
  Would this be possible?

  The problem of dead pixels has nothing to do with the graphics card but it s a display problem.
  So I was wondering why this problem persists after the LCD has been replaced

  Maybe a Toshiba laptop technician should verify and test parts of the hardware to make sure what part could be the problem exactly