Installation of the virus at startup software

Why install Mcafee always on startup? This blocks my access to the Internet for at least a few minutes.

You want to go at the start to protect your system - which, in itself, is not the reason why you are having problems of internet access.  It is probably not scans either because they affect internet access for more than a few moments all the more (if any) - even if they may affect the overall responsiveness of your system in general.  It's very probably updates its definitions at startup.  You can and should modify this setting at another time (when you are not using the computer, and it is turned on and connected).  If you turn off your computer at night and put in place to make updates when the machine is turned off, it is possible that since he cannot do it then he does it at the next opportunity (when you start the computer)-then try to take the time with care.  You can change when it only scans so while they happen when you're not usiing the computer if it is possible.  Whenever the download occurs it will probably slow down your connection speed (even if I don't expect to freeze everything - but I don't know how the update process works).

I hope this helps.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • installation of the software gives an error 1320, too long file name

    During the installation of the CAD of DraftSight software on a system running Windows 7 Prof I get an error message 1320, too long file name and the software cannot be installed.  A work around DraftSight suggested to rename the data folder C:\ProgramData\Application, DraftSight installation and then restore the original name of the file.  A second workaround was to delete the folder, install the program and then restore the folder.  A third workarounds solution had to drag or copy and paste the Application Data folder on the desktop, install the software and then return the ProgramData folder in the directory.

    For Windows 7 teacher the problem with alternatives a & is the shortcut to the application data to other programs is lost when the name or the file is restored, leaving only an Application Data folder and delete the shortcut.  The problem with the three workaround is that the shortcut cannot be dragged or cut and paste on the desktop.

    How can I temporarily allow the program to install and create a folder of Application data in the ProgramData directory and then move the program information in the folder the shortcut pointing to?

    I would also like to know how to get the same result with Windows Home Premium where the Application data file is not a shortcut, but is actually a locked folder.  I would need to enter the locked folder information on the program.  Some users of DraftSight say the two alternatives have worked for them and I suspect that they may work for Windows 7 Home Premium, but the impact on other programs may not be obvious.

    When you try to install the program?

    Assuming that you have the ability to choose where to install the program, you can try to shorten the location.
    For example, you can try to install to C:\Program Files\Draftsight\ or if necessary C:\Draftsight

    If this does not work, there is nothing that we will be able to suggest other than to contact the developer again. Change the ProgramData folder should not affect this type of problem and the only thing that is likely to affect the writing on the application folder data would be the length of your username, but even then I would feel that the application is something wrong in this case.

  • Install RAC 11 GR 2 and apply the patches with the new Option of software updates YES

    Anyone tried the installation with the new Option of software updates?

    I'm going to install grid RAC 11 GR 2 and I intend to do the following steps:
    (1) install the Oracle Grid Infrastructure 11.2.0.2 patch group
    (2) make all configurations with YES
    (3) create ASM disks
    (4) install Oracle Database 11.2.0.2 software only
    (5) apply recommended patches 11.2.0.2.2 Oracle (12311357) and 12431716. (Ref. MOS doc [756671.1 ID])
    (6) create the RAC (advanced option) with DBCA database

    With these steps:
    Grid and ASM disks would be configured without the recommended patches, but the database will be created with applied patches.

    I would not do a "Software only" install IM and then apply the patches because later I would have to manually do all the configuration steps.

    If I use the Option of YES software updates to apply patches, YES makes the adjustment, and then I would set up the GRID with YES?

    Quote from Oracle® Setup Guide Network Infrastructure 11 g Release 2 (11.2) for Linux - E17212 number of part-11:
    'Use the feature of dynamic download and apply software upgrades of software updates as part of the installation of the Oracle database. You can also download updates separately using the downloadUpdates option and later to apply during installation by providing the location where updates. »

    I could not find more detailed information on this feature in the documentation and MOS.

    Thank you

    Hello

    You can download the latest updates and patches to help with option - downloadUpdates

    ./runInstaller -downloadUpdates

    You can use this note:

    * How to download the latest updates and patches using 11.2.0.2 YES [ID 1295074.1] *.

    Don't miss...
    * Error: INS-20704 while installation 11.2.0.2 with Option 'use downloaded software updates' [1265270.1 ID] *.
    : Note ensure that the user download the updates of patches have own/correct permission to download updates to patch to MOS (My Oracle Support).
    Do not use the directories/tmp/oraInstall * for the download location. New bug 9975999

    Documentation explaining...
    4.5.1 running Oracle Universal Installer
    Download of updates before Installation
    http://download.Oracle.com/docs/CD/E11882_01/install.112/e16763/inst_task.htm#BABJGGJH

    Kind regards
    Levi Pereira

  • Why think the trend that your Installer is a virus?

    Hello support for Firefox.

    I'm just curious on why the trend would think that your Installer is a virus? It is, according to the latest trend titanium v7.0.1240 in Win8 x 64, this is apparently a TROJ_GEN. R0CBH02EM14

    In all cases, it allowed this installation and the product works, I would like to know why the executable has been marked as being infected.

    Thank you very much for your time

    Mutu you

    When I type the url http://www.mozilla.org/en-US/firefox/all/ on http://global.sitesafety.trendmicro.com/result.php , he gets a certificate of good health.

    I also tried to submit the same URL of Mozilla to virus Total (https://www.virustotal.com/en-gb/#url) and also specifically the en - us Windows file firefox https://download.mozilla.org/?product=firefox-29.0.1-SSL & os = win & lang = en-US link I used the new analysis
    option and both again to get a certificate of good health detection 0/52

    Mutu you
    Maybe if you insure your trend micro software is updated it will show that Firefox is ok now. As much as I know major releases of Mozilla servers have never had malware on them. I remember however these reports in the past that proved to be temporary false positives.

  • recovered XP (fully updated) will not complete installation of the software of HP officejet j6480

    The test report of wireless since installation of the printer indicates everything should be good, however, the installation of the officejet software never ends siaying may not detect the printer wireless. The test report the router and the printer are okay.

    I did not use to have Avast! Kaspersky Anti-virus when this same problem (pc recovery and al.) who has spent 9 months ago.

    My Fios Actiontec router shows the printer on the WiFi network is-, but it does not print!

    Hello

    Try to install the drivers of printer using DVD connected via a cable, and then try to configure the same wireless network.

  • Have all the viruses and software malware noticeable symptoms or if some may go unnoticed?

    Just curious to know if all the viruses and malware had a significant sign to be on a computer or not.  I would be grateful to anyone how helps me deepen my knowledge.

    Thank you.

    Hello

    They have symptoms of havoc total work completely in the background and on the
    all the rest.

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be more difficult to detect as the
    cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    New Vista and Windows 7 version
    http://OneCare.live.com/site/en-us/Center/whatsnew.htm

    Original version
    http://OneCare.live.com/site/en-us/default.htm

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • HPPIW. EXE does not solve the problem with the installation of the complete software for 8500 A909g

    Waterboy71 - sorry for a new position, but the forum is read-only (?) so I can't respond to your response to my problem with the installation of the driver/software 8500 A909g.  By your answer on 5/19, I downloaded HPPIW. EXE and it ran.  It detects my wireless printer, but it tells me that "the selected printer is not supported by this wizard."  Is there another thing I can do to install the software so that I can scan and fax from my Windows laptop 8.1?

    Hello
    If please try following the steps below and check if this can solve the problem:

    1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
    2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
    3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
    4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
    5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
    6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
    7. run the installation file and check all difference.

    Kind regards
    Shlomi

  • Cannot run the installation of the software for Photosmart C4580 with 8.1 (64)

    I deleted all the software my computer HP running Windows 8.1 (64-bit) and tried to reinstall the drivers and clean software for both my Photosmart C4580 and for my Scanjet G4010, but when the installation starts after downloading, I get an error for each device dialog box "the system cannot find the file (or reader) specified. The dialog box header is "Users/Philip/AppData/Local/Temp/7zS7D57/installation/hpzpnp"... »

    I can't get past this error message no matter how, I try to download and install. The printer still prints from another laptop in the network it is connected via the network, while the scanner is connected by USB.

    Hello
    Follow the steps below and check if it solves the problem:

    1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
    2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
    3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
    4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
    5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
    6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
    7. run the installation file and check all difference.

    8. After completing the two printers installattions rename the old file name extension to Dat and restart your PC.

    Kind regards
    Shlomi

  • BEX errors during the installation of the software/program updates

    I have recently upgraded to an SSD and a new drive hard on my PC and thought, everything was going well until I started to reinstall and update my old programs, where I keep coming across mistakes BEX I can't work around with my computer DEP settings. When I try, I get an error message stating, "this program must run with Data Execution Prevention (DEP) enabled. You can't turn off DEP for this program.

    Is it possible that I can get around this error in order to update my programs, or am I stuck with the ever-growing list programs I can is no longer updated accordingly?

    - - - - - - - - - - - - - - - - - - -

    Signature of the problem:
    Problem event name: BEX
    Application name: whql-radeon-software-crimson-edition-16.1-64bit-win10-win8.1-win
    Application version: 0.0.0.0
    Application timestamp: 54336eaa
    Fault Module name: ltc_game32 - 106568.dll
    Fault Module Version: 1.0.0.1
    Timestamp of Module error: 566 b. 4799
    Exception offset: 000aaf89
    Exception code: c0000417
    Exception data: 00000000
    OS version: 6.1.7601.2.1.0.768.3
    Locale ID: 1033
    Additional information 1: 7ba8
    More information 2: 7ba8a4bc43675385b12d0091164f5b9a
    3 more information: 3b 02
    Additional information 4: 3b02768676ca2422774930b07cabbc60

    Signature of the problem:
    Problem event name: BEX
    Name of the application: 1_CyberLink_PowerDirector14_Ultimate_Upgrade_VDE150831 - 02.exe
    Application version: 0.0.0.0
    Application timestamp: 4fd34d75
    Fault Module name: ltc_game32 - 106568.dll
    Fault Module Version: 1.0.0.1
    Timestamp of Module error: 566 b. 4799
    Exception offset: 000aaf89
    Exception code: c0000417
    Exception data: 00000000
    OS version: 6.1.7601.2.1.0.768.3
    Locale ID: 1033
    Additional information 1: 7ba8
    More information 2: 7ba8a4bc43675385b12d0091164f5b9a
    3 more information: 3b 02
    Additional information 4: 3b02768676ca2422774930b07cabbc60

    Signature of the problem:
    Problem event name: BEX
    Name of the application: 2_CyberLink_PowerDirector14_ContentPack_Essential_PCP150526 - 06.e
    Application version: 0.0.0.0
    Application timestamp: 4fd34d75
    Fault Module name: ltc_game32 - 106568.dll
    Fault Module Version: 1.0.0.1
    Timestamp of Module error: 566 b. 4799
    Exception offset: 000aaf89
    Exception code: c0000417
    Exception data: 00000000
    OS version: 6.1.7601.2.1.0.768.3
    Locale ID: 1033
    Additional information 1: 7ba8
    More information 2: 7ba8a4bc43675385b12d0091164f5b9a
    3 more information: 3b 02
    Additional information 4: 3b02768676ca2422774930b07cabbc60

    Hello

    Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

    I understand that you have problems during the installation of the software. This problem is possibly due to several reasons such as security software that can be installed on the computer, any program or application that is running on the computer on the bottom, or due to some errors on the hard drive of the computer.

    Method 1: Run the clean boot

    Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot

    How to perform a clean boot in Windows

    Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

    Method 2:

    Please see the advice given in the link given by Shinmila: 28 March 2010:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/cannot-disable-DEP-for-certain-programs/d5352d1e-11AC-4254-ad3f-c0ecb85311f0

    Let us know if you need more assistance. We will be happy to help you.

    _________________

    Thank you best regards &,.

    Isha Soni

  • Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

    Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

    Hello naqvi65,

    I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

    To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

    Restart your iPhone, iPad or iPod touch - Apple Support

    Take a look at this Web site using your photo app troubleshooting:
    Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

    To keep an eye on your battery use, take a look at the information here:
    On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

    To help maximize your battery performance, this site has some good tips for iOS devices:
    Batteries - maximize Performance - Apple

    See you soon!

  • DeskJet 1510 all-in-One: the installation of the software has failed after the USB connection and remain unfinihed. Work for printer and Scanner

    My PC Dell XPS401L has been updated to Win 7 Win 10.  Then, the HP DJ1510_188 software has been installed.

    The task was ok until the bond required of the Dekjet to the USB port.

    Heard the noise of the acknowledgement of receipt, but there screen remains unchanged despite I wait several minutes. So the installation remains unfinished. However, the printer and scanner are both of the device but are not available important "Solution Center" screen.  I already have the solutions of the error indicated by HP support withot success.

    The system indicates that the problems appear in the USBsetup.exe

    Can someone help on this subject?

    Horacio

    Hi @Horacio_B,

    Thanks for joining the Forums of HP Support for a solution to your installation problem.

    I understand that you try to use an all-in-one printer HP Deskjet 1510 with a PC that has been upgraded from Windows 7 to Windows 10 but does not complete the installation of the USB and the HP Solution Center is not available. I would like to help.

    I would like to start by disconnecting the USB cable and uninstall all software related to printers. Here is a support document which can be used if necessary reference - uninstalling the software of the printer (Windows).

    Once it's over try to use the HP printer installation wizard for installation. This tool will get the software and installation help.

    Please let me know if that solves the problem, or if you need assistance.

    Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

  • How to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012

    Hello

    I would like to know how to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012 R2.

    I released some software in my field to a distribution point and I of installation for few of them software restriction policies. But I don't want the default next message below:

    "The system administrator has set policies to prevent this installation." This installation is forbidden by system policy. Contact your system administrator. »

    Instead, I would like to set up a custom message. Please tell us how can I do same by using Group Policy, if not available, what are the alternatives that I can use.

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *

  • HP Pavilion 500-426nc: constant frost of HP Pavilion 500-426nc after the installation of the anti-virus

    Hello, everyone, I really hope someone will give me a few minutes to address this point.

    I started today with the installer of my new PC, a HP Pavilion 500 - 426nc AMD A10-7800 with Windows OS 8.1.

    Everything went well and I was enjoying my new machine speed.

    So I decided to install ESET Nod 32 antivirus. And since then, nothing I can do with my PC: it does not react to my orders, programs will not open and I can't turn it off even properly.

    I read the internet and realized, that I have installed McAfee (or at least a trial version of it) and maybe that's the problem. I wanted to uninstall McAfee, but I don't know how to do it, because my computer does not respond to what I want it to do!

    A few tips on how to get out of this frustrating situation, please?

    I thank very you much for any help.

    Hello:

    First of all, try to get in windows safe mode and uninstall the A / V software that you have installed.

    Enter the mode safe mode with W8.1 is a bit difficult to start the PC, so please read the news to find out how to enter WSM.

    http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-Windows-8-the-easy-way/

    Now, if you can get into safe mode, and you can uninstall the A / V software you have installed through the control panel > programs menu, restart your machine and see if it is OK.

    If so, read these instructions on how to safely remove any McAfee software.

    http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

    Finally... my 2 cents on the antivirus programs... why not just use the free A / V software (Windows Defender) that comes with W8.1?

    You will need to turn it on by reading the info on the link below after uninstalling all installed previously 3rd part A / v software

    http://www.fixedbyvonnie.com/2013/10/how-to-turn-on-Windows-Defender-in-Windows-8-1/

  • XP Pro sp3 freezes on the installation of the software

    XP Pro sp3 freezes on the installation of the software, each time, I tried to format the HARD drive and reinstalled still the same problem, works fine on Xp Pro Sp2, no update has been installed in the Pc hangs and windows update will not let me choose the updates I want Please help me.
    Confused and frustrated with WINDOWS!

    I finally found the problem with the driver of Tp-link for my internet access.
    It's all better now
    THX

  • HP Director launch even after the installation of the updated software. HP Officejet 5510.

    Problem launching HPdirector even after the installation of the updated driver.  Also not scan; message machine wants software installed.  Did not have this right?

    Any ideas?

    [Personal information]

    Hello drudgedread

    Follow the steps below and let me know what happens? These instructions will be clean your temporary folder (a folder that contains temporary data such as data configuration / installation) and rub the printer software with the most recent uninstall.bat utility for your printer.

    First step: clear temp directory
    Type %temp% term or search programs and files of field
    Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
    Proceed to step 2 below
    Second step: downloaded and extracted to your system:
    1 download the drivers and full software features
    Complete features Officejet 5510 software
    2. once the download is complete, double-click the file to extract the software.
    3. when the installation window opens, press the Cancel button to stop the installation
    4. tap folder in the race or search programs and files of field
    5. Locate and open the folder starting with 7z (example: 7zS2356)
    6. right click on the folder and select copy
    7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.
    8 open the 7z, that you just copied on your desktop
    9 open the Util folder
    10 open the CCC folder
    11 start the uninstall_L4
    12. once the uninstall is complete, restart the computer
    13. run disk cleanup from the tools Accessories\ system under all programs folder
    14. download and install the latest version of Adobe flash player
    Adobe Flash Player
    15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

    Let me know if you are able to successfully install the software and driver and are able to print & scan? Also, if there are errors or messages just them down and let me know.

Maybe you are looking for