Simultaneous I and AO and tracing

Similar Questions

• Simultaneous voice and data on Verizon?

  OK, you can now pre-order the phone, and yet I saw no confirmation one way or another as to if the Moto X play supports simultaneous voice and data on Verizon. I tweeted Verizon today and they claim that they do not have the specs of the phone.

  I can't believe anyone, namely, Motorola and Verizon, are able to answer this fundamental question.

  My Moto X (2014) can not STILL can't do, so I am wary to this model as well and rightly.

  Can we please get a definitive answer?

  Yes, you can get simultaneous voice and data on Verizon.

• HP Laserjet Pro 200: HP Laserjet Pro 200 - simultaneous USB and network use

  I would like to know if the printer above supports the use of simultaneous connections via USB connection or network? The printer is already set up as a USB printer to a computer, and I want to connect it to another host via network - is it possible to do without losing existing features, implemented through USB?

  Thanks a lot for your answer.

  HP is generally recommended not to connect the printer in this way, however, my experience is that it will work the way you want it to run.  Given that you use only on 2 sides of computers have several jobs interfere with the other probalby will never happen.

• Need of simultaneous bluetooth and audio HDMI

  I use a new home theater server.  Have Windows 7 Home Premium and Windows Media Center allows you to view and record TV as well as view photos and play music collection.  I am unable to use bluetooth headset to listen to the PC at the same time as the HDMI cable sends audio to the TV and the surround speakers.  If I turn on the bluetooth, it disables the audio from the HDMI interface.  How do I play simultaneously?  Thank you!!!

  I know that this is a thread of years. but there is a way, I was looking for my computer to do 3 outputs at the same time. but before that I had sorted out 2, I got hdmi and audio jack. It's the same concept. go to control panel > sound > recording > right-click in the empty space > see the disabled devices > right click of stereo mix > activate > stereo mix properties > listening > tick listen device and then set the device you want the sound to play from. so, to make a device defect and in stereo mix choose the second exit.
  hope this has helped.

• Smartphones blackBerry simultaneous voice and data on Verizon 3 G

  I got an iPhone 3G on AT & T and AT & T 3G network, I was able to use the data and voice simultaneously. This is supported on Verizon 3 G? I think not so much, but always wanted to know why this is the case.

  Fix. As it is now, correct.

• How real Manager simultaneous OPP and the target values differ?

  Hello

  How is it Manager simultaneous OPP real (6) & values targets (3) is different? What makes change? While the shifts > parameter values also haven't changed (oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads = 10).

  All information.

  Concerning

  Arizuddin

  Hello

  Please see if the following docs applies to you:

  -Number of post-processing process (OPP) has started is higher than the target [ID 1515086.1]

  -Output post-processor real process is 3 and target is 4 [ID 1378575.1]

  And see also the following links as mentioned before:

  differnce in real-time and simultaneous process target

  Concurrent managers don't start & actual/target population is not even

  real competitor Manager and different target

  Hope this helps

  Kind regards

• Can I have simultaneous USB and LAN for IX4 connections - 300 d?

  Can you have a USB to PC connection and a connection to the local network (ethernet) at the same time?

  I have not gigabit LAN (yet) and I have a few files that I need to transfer a PC, so I thought using USB 2.0 (not 3.0 yet) would be faster. So, I would just periodically connect the IX4 to PC via the USB port while it is still connected to the local network. Are there problems with it?

  ix4s USB ports are for drives external, printer or connections UPS only (ix4 ports are host ports) and not for connecting another host (customer e.g.PC).

  No luck...

• Simultaneous playback and record real-time show levels of vibrations and his Deputy

  First of all I would like to stress that I am very new to Labview (using Labview 2011) and Assistant Sound and Vibration (Labview Signal Express 2011).  I'm starting a project to measure the speech (sound pressure using microphone) and the body of vibration (using the accelerometer) related to the acquisition of data NI 9234.   I looked in the tutorial and the examples provided with Sound and Vibration Assistant (SVA).   These examples allowed me to make a first recording that is connected.  I could view the playback display after I transfer the log to the data view.   Frankly I'm more sure of my measurement data if I could observe the timewave with speech variation.  I wonder if this is possible.  If it's possible, thanks in advance for pointing the direction.

  Thank you.

  Abu Dzarr

  You can look at the data, because it accumulates in one of two ways:

  1. Create a viewer and drag out of the acquisition apparatus in the Viewer.  It will give you a live view of the data.
  
  
  2. Create a viewer and drag the newspaper in the Viewer.  By default, this should show you that the current buffer being written to the file.  You can change that to click with the right button on the graph to view in the viewer and selecting show the whole graph, a static part of the graph, etc.

• Create a control simultaneous dial and digital?

  I have a dial that displays a number to the program when shot (and the number in the text box of indicator), but it is difficult to be precise with just the dial, so I want to create the opportunity to write in the text box that displays the current number on the dial. is there a quick way to do it?

  

  Right-click on the dial, the visible elements of goto, click digital display.

  Who should do it

  
  

• simultaneous reading and writing on a PDM file

  I found similar discussions on here, but none that satisfied my problem. I'm running several loops within a vi, which writes data in a permanently .tdms file. Another loop to finish its task from the start in a test, and I want to transition this loop so that it accesses the file writing and started writing on a network. It also enables me to check that the data is being stored in the file and that it is corrupt.

  I started with just the basics, but when I pass the second loop to read the file that is is always written off mistakes, saying that she met at the end of the file. It does if I put the count 1, -1 or anything in between. It illuminates, however, the end of the file output.

  I have the entry in the file tdms on PDM read wired to a local variable, just as I do writing PDM, they all have both read the same thing and I get an iterations of a data value of the reading, so, apparently, file access is no problem. And I have to someone who cringed to local variables, ensure that reading and writing are not activated until the local variable is updated.

  Try to set the "group name" entry on «TDMS read» If you write more than one group, you can use "View the contents of the DDHN" in order to get a list of groups.

  Herbert

• Continuous operation and tracing

  Hi guys,.

  I have this problem.
  I plan to plot X and Y movements on a XY plot.

  My concerns:

  1 have the Boolean individual buttons to operate the functioning of a number.
  (I have the individual buttons but I can't seem to permanently keep the number)
  (That is, once I click on the button the number starts running until I let go, den he stops at what the value is at)
   
  2. the data is not in the XY graph.
   
  PLs advice of.
   
  Thks N RDG

  Titano

  So what you want is the mechanical action, switch to release.  I think that an architecture where the buttons are questioned would be easier to work with in this case.  Pour.001, then simply add or soustraire.001.

  See attachment.

• Separate values in an excel file and tracing

  Hello

  I use excel reading table vi to read values from an excel file. I see the data in the output.

  I wanted to take the first two columns and multiply each value with 20 m and then it draw in a XY Chart.

  I enclose the files below.

  Thanks in advance

  Hi gerard

  That's what I did to get the result. Maybe not the conventional method, but it is very well done for me. Thanks for looking into it.

  Simon

  PS

  the text file must be in download format.coudnt LVM it like that

• simultaneous reading and writing files TDMS

  A customer had a program written in 8.6; the programmer is no longer available and I'm looking to debug intermittent problems.

  N - channels of data is acquired and streamed to a PDM file. The operator can select a channel to view data in real time, but the display is one scope table displaying 15 seconds worth of data and when switching of channels the program "returns" display with the last 15 seconds of a data value of the new string (barrier data extracted from the TDMS file).

  What I notice here, aside from using sloppy cluster error, is that both references are open in the file - one for writing data and the other for recovery data. Is this a good practice? is it necessary or one reference supports the reading and writing? Is this a possible source of problems?

  

  thanx

  lmd2

  You can do the same thing with a single file reference.

  The issue of not being able to see the data that was written after the reading of reference has been opened is known for having refnums to open in two different processes, but not in the same executable or VI.

  Herbert

• Dynamic creation and tracing in CNiGraph

  Hello

  I would like to create a temporary object of CNiGraph, plot data and make a picture.  I am able to create the object dynamically (I think) but I get a runtime error when you try to plot data (using Idrsqu) on the graph.

  The error is in the AfxGetAmbientActCtx function.

  My code for creating control looks like:

  CNiGraph niGraph;

  CRect rect (CPoint (0, 0), m_Size); the size of the graphic

  CDC * pDC is pWnd-> GetDC();.

  BSTR bstrLic =:ysAllocStringLen (/ * stuff to generate the license * /);

  niGraph.CreateControl ("CWGraph", "", WS_VISIBLE, rect, pWnd,)

  m_staticControlID ++, NULL, FALSE, bstrLic);

  Use static control ID to ensure unique IDs

  :ysFreeString (bstrLic);

  ChartPreviewData (niGraph, pList, settings);

  ... is the result of an untested for the rendering of an image code

  pWnd is a CPropertySheet (a window is valid, but I use as a model to temporarily hold the chart).  ChartPreviewData for this...

  void CXyzClass::ChartPreviewData)

  CNiGraph & graphic,... a few other arguments...)

  {
  a code to get ready to put in the vector data OR

  CNiReal64Vector niVector (numPoints, pBuffer);

  Graph SetChartLength (numPoints);

  The data graphic and set delta X to reflect the sampling frequency used

  CNiPlot field = graphics. Plots.Add ();

  parcel of land. MultiPlot = TRUE;

  parcel of land. Charts (niVector, (double) 1 / pSeries-> GetFs());  crashes

  Remove pBuffer;

  }

  When I scroll in the debugger, it looks like NiGraph gets created correct.  In fact, I can see from the dialog box.  However the call Idrsqu gives me a runtime error.  I suspect I'm missing something to do with ActiveX, but I don't know what.

  Thank you, Nick

  Sorry, it's resolved.  I had a stupid mistake and going on a vector of length zero to Idrsqu.

  I discovered this way upward in the call stack an exception was thrown for this reason.

• DeskJet 3512 simultaneous usb and wireless?

  I have summer/am hoping to be able to set up so that my wife could print 'Wireless' so that I could maintain the ability to print from my desktop. Now, I see that I must "move" backwards?

  Is there a way that it can be placed on my desktop USB while allowing it to print from the laptop, whenever she needs?

  Hope that makes sense has failed to find anything while I was searching for this problem... ?

  Thank you!

  Connect your via USB, install the printer.  connect wirelessly to the woman, the printer and wireless.  Should work just fine.