Site to Site with split tunnel question

Similar Questions

• VPN3005 - PIX506 using NEM & IPP with split tunnel

  After the design is given

  VPN3005 (central) - tunnel - PIX506 (Remote) network-extension-mode & RRI

  A VPN (PC) Client connects to VPN3005 and wants to reach the server at the site of PIX506 above the tunnel of 3005 to PIX506.

  At the same time the users on LAN Pix506 want to use Internet directly - which means

  split tunneling should be used.

  On VPN3005 under IProuting - RRI - IPP network extension and

  Customer IPP is enabled.

  Connectivity between LAN (central) and LAN (remote) is known, but IPP for

  VPN Client (PC) (wants to connect to the server on the Remote LAN) is not possible.

  If split for ezvpn (PIX506) tunneling is used.

  It works, if you all tunnel!

  Question:

  Is this cause is not possible, this feature (EZVPN + RRI + split-tunnel) is not implemented, or if this thing works well?

  (Even behave with a real HW3002)

  BTW. VPNConc3.6.7 (3.6.3,3.6.5,3.6.7A), HW3002 3.6.7, PIX 6.2.2 (6.3.136beta)

  Images in brackets have also been tested with even behave.

  Thank you for the help & information

  This thing in advance.

  Kind regards

  Stefan

  You have the pool of addresses VPN client in the tunnel of split for the PIX list? The troubled with making split tunneling is that traffic has behind the PIX for this network first, then only ITS special is based for this particular network subnet. If you try to connect via a client, or even to the LAN behind the 3005 (same thing in theory), then unless someone behind the PIX sent traffic to this subnet first, your traffic will not get there.

  When the split tunneling is not used, the PIX automatically creates the SA for all networks, and that's why you can then test the hosts a VPN client (or to the LAN behind the 3005).

  Take a simple test and launch a VPN client to the 3005 connection, making sure that the address pool is in the list of PIX split tunnel. If you try and ping from the client to the PIX network it will not work. Now have someone behind the PIX ping to the address of the VPN client, you will probably lose the first packages of one or two, but then it should respond OK. NOW try to VPN client and ping, PIX network, it should work now, because the PIX has built the tunnel to the address pool.

• SRP527W with Split Tunnel

  Hi guys,.

  I just sent a SRP527W that I had lying around for a while.

  Everything about the unit works as well as can be expected, however I have an obligation to perform split tunneling for VPN users.

  Currently, the only way that receives the VPN client is a default route. I noticed that on site-to-site VPN and tunnels GRE, you can specify safe routes, but I can't find anything that relates to remote VPN users. This can be done on IOS without problem, but would be good for the RPS.

  I'm under the latest firmware 1.01.26, so if I have not forgotten anything it would be probably for a future version?

  See you soon.

  Bryce

  Hi Bryce,.

  Nothing is overlooked, it is not possible to set up split tunneling for the VPN of the RPS server.

  Kind regards

  Andy

• Muse site with SSL cert question...

  I have a SSL on my site of Muse, but the url still shows once http and https. How to display ONLY the secure url? Thank you!

  Hi Michael,

  SSL certificates can be added on the server side and not in the Muse. Using Business Catalyst to host the site?

  Kind regards

  Akshay

• Problem with route on PC with split tunnel VPN

  Hi all

  I have the following situation:

  ASA 5515 X 8.6 running

  I have several inside sub interfaces:

  .10 = 192.168.10.124

  .11 = 192.168.11.124

  .12 = 192.168.12.1/24

  .13 = 192.168.13.1/24

  .14 = 192.168.14.1/24

  Now, I want to implement a VPN IPSec remote access:

  I attribute the range 192.168.99.5 to 192.168.99.50 for VPN clients.

  I have configured the tunneling split for the following networks: 192.168.10.0, 192.168.11.0 and 192.168.12.0

  They are also exempt from NAT.

  So the config looks good.

  The VPN is in place.

  However, when connecting to the VPN, none of these networks are available.

  After troubleshooting, I discovered the following:

  Received my card VPN IP address is 192.168.99.5 (as expected)

  However, when I make a copy of the itinerary, I see the following:

  Destination netmask gateway interface

  192.168.10.0 255.255.255.0 192.168.99.1 192.168.99.5

  192.168.11.0 255.255.255.0 192.168.99.1 192.168.99.5

  192.168.12.0 255.255.255.0 192.168.99.1 192.168.99.5

  The entry door to the routing of my PC table is pointing to a non-existent address, in my opinion it schould be on the same address as my adapter VPN (192.168.99.5).

  I tried this with annyconnect and the classic VPN client.

  Where I'm going wrong?

  No, this ip pointing 192.168.99.1 route is correct. It is not the cause of the problem.

• Need help with the configuration of the Site with crossed on Cisco ASA5510 8.2 IPSec VPN Client (1)

  Need urgent help in the configuration of the Client VPN IPSec Site with crossed on Cisco ASA5510 - 8.2 (1).

  Here is the presentation:

  

  There are two leased lines for Internet access - a route 1.1.1.1 and 2.2.2.2, the latter being the default Standard, old East for backup.

  I was able to configure the Client VPN IPSec Site

  (1) with access to the outside so that the internal network (172.16.0.0/24) behind the asa

  (2) with Split tunnel with simultaneous assess internal LAN and Internet on the outside.

  But I was not able to make the tradiotional model Hairpinng to work in this scenario.

  I followed every possible suggestions made on this subject in many topics of Discussion but still no luck. Can someone help me here please?

  Here is the race-Conf with Normal Client to Site IPSec VPN configured with no access boarding:

  LIMITATION: Cannot boot into any other image ios for unavoidable reasons, must use 8.2 (1)

  race-conf - Site VPN Customer normal work without internet access/split tunnel

  : ASA Version 8.2 (1) ! ciscoasa hostname domain cisco.campus.com enable the encrypted password xxxxxxxxxxxxxx XXXXXXXXXXXXXX encrypted passwd names of ! interface GigabitEthernet0/0 nameif outside internet1 security-level 0 IP 1.1.1.1 255.255.255.240 ! interface GigabitEthernet0/1 nameif outside internet2 security-level 0 IP address 2.2.2.2 255.255.255.224 ! interface GigabitEthernet0/2 nameif dmz interface security-level 0 IP 10.0.1.1 255.255.255.0 ! interface GigabitEthernet0/3 nameif campus-lan security-level 0 IP 172.16.0.1 255.255.0.0 ! interface Management0/0 nameif CSC-MGMT security-level 100 the IP 10.0.0.4 address 255.255.255.0 ! boot system Disk0: / asa821 - k8.bin boot system Disk0: / asa843 - k8.bin passive FTP mode DNS server-group DefaultDNS domain cisco.campus.com permit same-security-traffic inter-interface permit same-security-traffic intra-interface object-group network cmps-lan the object-group CSC - ip network object-group network www-Interior object-group network www-outside object-group service tcp-80 object-group service udp-53 object-group service https object-group service pop3 object-group service smtp object-group service tcp80 object-group service http-s object-group service pop3-110 object-group service smtp25 object-group service udp53 object-group service ssh object-group service tcp-port port udp-object-group service object-group service ftp object-group service ftp - data object-group network csc1-ip object-group service all-tcp-udp access list INTERNET1-IN extended permit ip host 1.2.2.2 2.2.2.3 access-list extended SCC-OUT permit ip host 10.0.0.5 everything list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq www list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any https eq list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq ssh list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 no matter what eq ftp list of access CAMPUS-LAN extended permitted udp 172.16.0.0 255.255.0.0 no matter what eq field list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq smtp list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq pop3 access CAMPUS-wide LAN ip allowed list a whole access-list CSC - acl note scan web and mail traffic access-list CSC - acl extended permit tcp any any eq smtp access-list CSC - acl extended permit tcp any any eq pop3 access-list CSC - acl note scan web and mail traffic access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 993 access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq imap4 access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 465

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq www

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq https

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq smtp

  access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq pop3

  access-list extended INTERNET2-IN permit ip any host 1.1.1.2

  access-list sheep extended ip 172.16.0.0 allow 255.255.0.0 172.16.0.0 255.255.0.0

  access list DNS-inspect extended permit tcp any any eq field

  access list DNS-inspect extended permit udp any any eq field

  access-list extended capin permit ip host 172.16.1.234 all

  access-list extended capin permit ip host 172.16.1.52 all

  access-list extended capin permit ip any host 172.16.1.52

  Capin list extended access permit ip host 172.16.0.82 172.16.0.61

  Capin list extended access permit ip host 172.16.0.61 172.16.0.82

  access-list extended capout permit ip host 2.2.2.2 everything

  access-list extended capout permit ip any host 2.2.2.2

  Access campus-lan_nat0_outbound extended ip 172.16.0.0 list allow 255.255.0.0 192.168.150.0 255.255.255.0

  pager lines 24

  Enable logging

  debug logging in buffered memory

  asdm of logging of information

  Internet1-outside of MTU 1500

  Internet2-outside of MTU 1500

  interface-dmz MTU 1500

  Campus-lan of MTU 1500

  MTU 1500 CSC-MGMT

  IP local pool 192.168.150.2 - 192.168.150.250 mask 255.255.255.0 vpnpool1

  IP check path reverse interface internet2-outside

  IP check path reverse interface interface-dmz

  IP check path opposite campus-lan interface

  IP check path reverse interface CSC-MGMT

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 621.bin

  don't allow no asdm history

  ARP timeout 14400

  interface of global (internet1-outside) 1

  interface of global (internet2-outside) 1

  NAT (campus-lan) 0-campus-lan_nat0_outbound access list

  NAT (campus-lan) 1 0.0.0.0 0.0.0.0

  NAT (CSC-MGMT) 1 10.0.0.5 255.255.255.255

  static (CSC-MGMT, internet2-outside) 2.2.2.3 10.0.0.5 netmask 255.255.255.255

  Access-group INTERNET2-IN interface internet1-outside

  group-access INTERNET1-IN interface internet2-outside

  group-access CAMPUS-LAN in campus-lan interface

  CSC-OUT access-group in SCC-MGMT interface

  Internet2-outside route 0.0.0.0 0.0.0.0 2.2.2.5 1

  Route internet1-outside 0.0.0.0 0.0.0.0 1.1.1.5 2

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  AAA authentication enable LOCAL console

  Enable http server

  http 10.0.0.2 255.255.255.255 CSC-MGMT

  http 10.0.0.8 255.255.255.255 CSC-MGMT

  HTTP 1.2.2.2 255.255.255.255 internet2-outside

  HTTP 1.2.2.2 255.255.255.255 internet1-outside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs set group5

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  Crypto map internet2-outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  crypto internet2-outside_map outside internet2 network interface card

  Crypto ca trustpoint _SmartCallHome_ServerCA

  Configure CRL

  Crypto ca certificate chain _SmartCallHome_ServerCA

  certificate ca xyzxyzxyzyxzxyzxyzxyzxxyzyxzyxzy

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as

  a67a897as a67a897as a67a897as a67a897as a67a897as

  quit smoking

  ISAKMP crypto enable internet2-outside

  crypto ISAKMP policy 10

  preshared authentication

  aes encryption

  md5 hash

  Group 2

  life 86400

  Telnet 10.0.0.2 255.255.255.255 CSC-MGMT

  Telnet 10.0.0.8 255.255.255.255 CSC-MGMT

  Telnet timeout 5

  SSH 1.2.3.3 255.255.255.240 internet1-outside

  SSH 1.2.2.2 255.255.255.255 internet1-outside

  SSH 1.2.2.2 255.255.255.255 internet2-outside

  SSH timeout 5

  Console timeout 0

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal VPN_TG_1 group policy

  VPN_TG_1 group policy attributes

  Protocol-tunnel-VPN IPSec

  username ssochelpdesk encrypted password privilege 15 xxxxxxxxxxxxxx

  privilege of encrypted password username administrator 15 xxxxxxxxxxxxxx

  username vpnuser1 encrypted password privilege 0 xxxxxxxxxxxxxx

  username vpnuser1 attributes

  VPN-group-policy VPN_TG_1

  type tunnel-group VPN_TG_1 remote access

  attributes global-tunnel-group VPN_TG_1

  address vpnpool1 pool

  Group Policy - by default-VPN_TG_1

  IPSec-attributes tunnel-group VPN_TG_1

  pre-shared-key *.

  !

  class-map cmap-DNS

  matches the access list DNS-inspect

  CCS-class class-map

  corresponds to the CSC - acl access list

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  CCS category

  CSC help

  cmap-DNS class

  inspect the preset_dns_map dns

  !

  global service-policy global_policy

  context of prompt hostname

  Cryptochecksum: y0y0y0y0y0y0y0y0y0y0y0y0y0y

  : end

  Adding dynamic NAT for 192.168.150.0/24 on the external interface works, or works the sysopt connection permit VPN

  Please tell what to do here, to pin all of the traffic Internet from VPN Clients.

  That is, that I need clients connected via VPN tunnel, when connected to the internet, should have their addresses IP NAT'ted against the address of outside internet2 network 2.2.2.2 interface, as it happens for the customers of Campus (172.16.0.0/16)

  I am well aware of all involved in here, so please be elaborative in your answers. Please let me know if you need more information about this configuration to respond to my request.

  Thank you & best regards

  MAXS

  
  

  Hello

  If possible, I'd like to see that a TCP connection attempt (e.g. http://www.google.com) in the ASDM logging of the VPN Client when you set up the dynamic NAT for the VPN Pool also.

  I'll try also the command "packet - trace" on the SAA, while the VPN Client is connected to the ASA.

  The command format is

  packet-tracer intput tcp

  That should tell what the SAA for this kind of package entering its "input" interface

  Still can not see something wrong with the configuration (other than the statement of "nat" missing Dynamics PAT)

  -Jouni

• Access restricted without the split tunneling

  I'm disabled with Split tunneling VPN concentrator. Split tunneling has been disabled to carry the internet traffic of vpn clients via our internal web filtering server. But I must restrict access to my internal servers. How can I do that. I tried with filters/Rules but his does not work, and depending on the traffic of documents filter applies only to the traffic unencrypted.

  Thank you

  Avil

  If you use a VPN3000 while you can apply a filter to the users configured in group. This filter can restrict access to the servers as a list of specific protocols and access. This filter certainly applies to ENCRYPTED traffic, do not know what you are referring to your last sentence.

  You must first define the rules to define the traffic you want to restrict address., see here for more details:

  http://www.Cisco.com/univercd/CC/TD/doc/product/VPN/vpn3000/4_1/config/polmgt.htm#1321359

  Define a filter, then add the rules you just set it to him:

  http://www.Cisco.com/univercd/CC/TD/doc/product/VPN/vpn3000/4_1/config/polmgt.htm#1007037

  Thne go under the group that these users are configured with, and then apply the filter to it.

  A couple of sample filter are the following:

  Allow access to 10.1.1.2 and block everything else:

  To block access to everything, but 10.10.1.2, create a rule that is Inbound/Forward, Source of Anything, Destination of 10.1.1.2/0.0.0.0. Create another rule, it can be left at the default value which is incoming, drop, no matter what Source Dest what whatsoever. Create a filter with the default action of the front and add two new your rules, ensuring that rule that allows access to the host 10.1.12 is above the default rule which will pass everything else.

  Block access to 10.1.1.2, and leave all the rest:

  To allow access to everything except 10.10.1.2, create a rule that said, drop, no matter what Source and Destination of 10.10.1.2/0.0.0.0. Add a filter that has a default action is to send, add the rule to the filter.

  Notes:

  -You can allow or block access to subnets simply by changing your address/mask to something like combination: 10.1.1.0/0.0.0.255

• Cannot SSH in ASA after EZVPN configuration and do not specify "split-tunnel-political tunnelspecified.

  Even after the "split-tunnel-policy tunnelspecified" specification with "split-tunnel-network-list value TUNNEL of SPLITTING" and denying all traffic to the public IP address of the ASA, I'm still not able to SSH in the firewall. Everything else seems to work OK, but I have to be able to handle the ASA from the public interface. In fact, I expect little given the mean one sa is the installer for the tunnel, and it would seem that a deny statement would be ignored, but perhaps there is a way around this. Thank you.

  If you want to connect to your home IP through the tunnel, you must specify 'inside access management:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/configuration/guide/a...

  Best regards, Karsten

  Sent by Cisco Support technique iPad App

• Split tunnel

  Hi guys,.

  I wonder if remote access VPN with split tunnel is using the home user or the corporate to surf internet connection own internet connection?

  Any help will be greatly appreciated.

  Thank you

  Lake

  Dear Lakeram,

  Split tunneling allows you to access certain resources through the tunnel and all other traffic will be sent to your local proxy.

  VPN traffic is defined by the VPN endpoint, for example:

  192.168.1.0/24---Internet---ADSL ASA VPN client-

  You can have the ASA push the network 192.168.1.0/24 to the customer. Once connected if the client tries to access everything that comes out of the scope of the network, this traffic will be sent to the LAN...

  Here's an example with ASA and router.

  ASA/PIX: Allow the tunneling split for the VPN Clients on the example of Configuration of ASA

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080702999.shtml

  ASA 8.x: allow the tunneling split for AnyConnect VPN Client on the example of Configuration of ASA

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080975e83.shtml

  Router allows the VPN Clients to connect to IPsec and Internet using Split Tunneling Configuration example

  http://www.Cisco.com/en/us/products/HW/routers/ps274/products_configuration_example09186a0080819289.shtml

  I hope it helps.

  Thank you.

• Split tunneling VPN site-to-site

  Dear all,

  I have two ASA 5510 with VPN site-to-site, I can send all Internet traffic to the central site (HQ),

  How to set the split tunneling to access Campus LAN (192.168.2.0/24) of LAN2.

  Thank you in advance.

  Best regards

  Zoltan

  You can have 'decline' instruction on your ACL crypto and he will deviate the traffic is encrypted to the site-to-site VPN tunnel.

  For ASA 1:

  access-list extended 100 permit ip 10.10.16.192 255.255.255.192 10.10.16.128 255.255.255.192

  access-list extended 100 permit ip 10.0.0.0 255.0.0.0 10.10.16.128 255.255.255.192

  access-list extended 100 deny ip 192.168.2.0 255.255.255.0 10.10.16.128 255.255.255.192

  access-list extended 100 permit ip any 10.10.16.128 255.255.255.192

  For ASA 2:

  access-list extended 100 permit ip 10.10.16.128 255.255.255.192 10.10.16.192 255.255.255.192

  access-list extended 100 permit ip 10.10.16.128 255.255.255.192 10.0.0.0 255.0.0.0

  access-list extended 100 deny ip 10.10.16.128 255.255.255.192 192.168.2.0 255.255.255.0

  access-list extended 100 permit ip 10.10.16.128 255.255.255.192 all

  Hope that helps.

• ASA with 2 Tunnels L2L at the same Site / same network

  I have an ASA 5510 to A Site with a L2L tunnel to another site, subnet b. site unique to each site. In a few weeks, we will add a second

  Internet access to Site B, then the two connections will be active. But we want traffic to go through the new connection unless it breaks down, then use the other. How to configure on the SAA so he doesn't get confused as to what tunnel take to arrive at the B Site subnet? Is this possible?

  If ASA on Site B will have two different interfaces, terminating the VPN, Site A, set you two peers (a favorite).

  i.e.

  cry map mymap 10 set peer 1.1.1.1 2.2.2.2

  Assuming that 1.1.1.1 first Site B public IP address of the ASA and 2.2.2.2 is second Site B public IP address of the ASA.

  The ASA to Site A will attempt to establish the tunnel to 1.1.1.1 first, and if it fails, it will try 2.2.2.2

  On Site B, ASA must have the card encryption on both interfaces.

  You can set the Site B ASA come from the tunnel and the SAA on Site A receive.

  Federico.

• Tunnel VPN site to Site with DDNS

  I have a hub site that has a static ip address and a remote site with DDNS.  I am building a Site to Site tunnel between them, I can do this with the static ip address, but when he changes the tunnel breaks down, so I need a way to the ASA to know when this ip address changes.  How can I do this?

  Thank you

  To my knowledge, DDNS for VPN is supported only on router IOS not on ASA.

  If you use ASA on the head of network, you may need to use EasyVPN

  http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a0080912cfd.shtml

  EasyVPN VPN must be started from the remote site.

• I am currently working on a site that has the integration of Paypal which includes the page redirects (confirm or cancel). My goal is to have the implementation of site with a layout for desktop, Tablet and phone. My question is when I have a redirect pag

  I am currently working on a site that has the integration of Paypal which includes the page redirects (confirm or cancel). My goal is to have the implementation of site with a layout for desktop, Tablet and phone. My question is when I have a redirect page should I create a separate provision of the page for each device or just a provision of office that fits all three screen sizes? I hope that if the html page has the same name of the device (query) is automatically detected. Help with the help of Adobe Muse CC

  By Payal integration, you mean paypal html button? or etc payment gateway configuration? If this is a configuration of the gateway to your site domain name then a single page with any structure will work, but if you use the button code for all associated formats then you will need to create separate pages for all.

  Thank you

  Sanjit

• Cisco ASA 5510 VPN Site to Site with Sonicwall

  I am trying to configure a tunnel between a Cisco ASA 5510 VPN (Version 8.2 (2)) and TZ200 Sonicwall. I rose tunnel and go and I am able to ping the internal IP address of Cisco ASA of the Sonicwall LAN but nothing work. When I try to ping a host behind the Cisco ASA of the Sonicwall LAN I get the following message "rules asymmetrical NAT matched for flows forward and backward; Connection for tcp src outside:10.20.10.x/xxxx dst inside:10.20.2.x/xxxx refused due to failure of reverse path of NAT"on the SAA

  Googling the error above shows the problems with version 8.3 or later that resembled the nat commands have been changed SAA, train is still on 8.2 but I another common question does not add an exemption of NAT I have double-triple checked that I did add an exception rule of NAT of the hosts on the network from cisco for the guests of the Sonicwall network. Looks like I hit a road block so any help would be appreciated. Thank you

  Here are a few excertps of the config file (10.20.2.0 behind the cisco) and 10.20.10.0 behind the sonicwall

  NAT (inside) 0 access-list sheep

  ..

  IP 10.20.2.0 allow Access-list extended sheep 255.255.255.0 10.20.10.0 255.255.255.0

  access extensive list ip 10.20.2.0 outside_1_cryptomap allow 255.255.255.0 10.20.10.0 255.255.255.0

  ..

  card crypto outside_map 1 match address outside_1_cryptomap

  card crypto outside_map 1 set counterpart x.x.x.x

  card crypto outside_map 1 set of transformation-ESP-3DES-SHA

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  ..

  crypto ISAKMP allow outside

  crypto ISAKMP policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  lifetime 28800

  ..

  internal SiteToSitePolicy group strategy

  attributes of Group Policy SiteToSitePolicy

  VPN-idle-timeout no

  Protocol-tunnel-VPN IPSec

  Split-tunnel-network-list no

  ..

  tunnel-group x.x.x.x type ipsec-l2l

  tunnel-group x.x.x.x General attributes

  Group Policy - by default-SiteToSitePolicy

  tunnel-group ipsec-attributes x.x.x.x

  pre-shared key *.

  ..

  Added some excerpts from the configuration file

  Hello Manjitriat,

  Okay, detected IPSEC parody is normal, that means you are trying to send unencrypted on a line of encrypted packets.

  Now, if you see on the plotter of package that traffic will hollow the VPN channel all its fine in your site.

  Now the packet tracer must be something like this:

  entrance to Packet-trace inside private_ip_lan destination_private_ip_lan 1025 tcp 80

  Please provide us with the result of the following instructions after you run the packet tracer.

  See the crypto Isakamp SA

  See the crypto Ipsec SA

  Kind regards

  Julio

• I've updated Windows 8.0 Windows 8.1, since Firefox run a bit oddly. In particular, when on the sites with lots of images like Facebook, etc.

  Hello, I am writing because I have a few problems with my favorite browser after update to 8.1 Windows. Here are some details. I've updated Windows 8.0 Windows 8.1, since Firefox run a bit oddly. In particular, when on sites with lots of images like Facebook. It's as if there is some sort of effect of Flikr between the office and the images, as well as between the images and the browser (a bit like old flikering of 16-bit video games). It's not too bad, but it's a question. I tried to reset firefox and restart the computer. I have not tried a repair, and I haven't done an uninstall.

  Hello, disable hardware acceleration in firefox should a restart of the application is taken into account. have you tried that too?

  Please also see if there is an available update your graphics drivers ...