SL410-31 days out of warranty, DEAD... Help!

Similar Questions

• hard drive 3 days out of warranty failure

  Hey I'm after a bit of advice on what to with my laptop that I am 3 days out of warranty and the hard drive has failed just could someone advise me, what are the chances to honor the warranty on my hp laptop

  I look forward to your replies
  Mick

  Hello

  Thanks for posting.

  Unfortnetly the user forums is managed by HP customer like you and me for the most part, so the chances of a person has been able to help in this case is quite thin. Your best bet is to phone HP numbers are here and tell them about this problem, if you are not with them. You can try and ask to speak with there customer service, these are the people who have the most power in call centers, so if you ask them nicley they may be able to help.

  Once more I do not work for Hp if it is something puerley I mean you could get somwhere.

  Good luck.. Keep us on how you can

  James

  EDIT: You may also be able to contact higher than people such as managers of customer service by selecting the option of the company instead of support afer by selecting your country and language from the link above, once you have done this, you can select Executive Director email or the comments button General according to which country you are in.

• Pavilion D7 4177nr blank screen with cursor five days out of warranty.

  I have a Pavillion D7 portable 4177nr.   I have not had any problems with it by the window / the warranty period.   Five days after the expiration of the warranty I used it, walked for 20 minutes and returned to find a blank screen with blinking cursor.  I ran the diagnostics and everything passed.  I can't start in safe mode.  .   I am extremely disappointed, because I really liked this assistance please phone!

  Can you boot into the BIOS screen (pressing F10 when booting) and check if the laptop can be started in it?

  If so, I recommend to run the system diagnostics and check if the hardware on the unit works very well.

  In case it does, you can check if you can press F11 and restore your computer to factory settings. Please make sure that you back up your data before performing a recovery.

• 10/20/2015, said out of warranty purchase date system. Help less than 1 year...

  System says I'm out of warranty and has a date of 29/09/15 but my watch purchase receipt 10/20/2015. Cannot reach a live person. Any number or e-mail to reach a live person for support if system thinks I'm out of warranty?

  Jen

  You cannot discuss or talk on the phone with a professional Acer support if your SNID is listed as "out of warranty". You can will not receive a 3rd party that will help you for a fee. (very frustrating)

  After several attempts, I finally found someone with the 3rd party provider who was able to fix the status 'out of warranty '. The first tests I was told that they could not help me with the inaccurate warranty status because they do not work for Acer.

  Go to the following site to download your proof of purchase:

  http://csapps.Acer.com/pop

• HELP NEEDED PLS EMERGENCY! -All new V313w printer paper feed - and apparently out of warranty already? If no support online?

  I bought a new laptop and printer V313w all-in-one a month ago. and I only turned on the printer for the first time today because of a need to send invitations to an upcoming event.

  I used the printer to print envelopes and about 15 sheets of specialty paper. Until all of a sudden it starts to chew the paper and do not supply through everything in print.

  I check online for drivers and updates and download all the relevant files. Try again and still has the same problem, whenever I have print now it chews paper. in fact, it looks like the print head is ripping through the paper.

  I try to find online for assistance too find that apparently it is already out of warranty?

  Everyone here has similar problems with the V313w? Is really starting to get frustrated, because I can't even contact Dell for assistance as I apparently no guarantee?

  Any help from people out there would be appreciated. I really need to try to get the last few invitations printed. (and I'm not buying a printer in order to 15 pieces of paper! only to have to throw it out and by another brand)

  Thank you in advance.

  Thanks for your reply.

  After about 3 hours of trial and error. (and a lot of paper wasted and torn). I found the problem.

  V313w paper feeding, there are several small curlers who seem to be held in place using small springs. they are really hard to do because there is only one opening to remove the jammed paper. in my case, two of these rolls were lower than the rest. This has created in turn issues when printing because it would interrupt the queue through paper.

  After many difficulties, I finished with a set of pliers tweezers for these rolls in line with the rest of the rolls.

  Because now the printer seems to work, so I just assume that these rollers must have been shaken loose / out of position during childbirth.

  So for anyone having problems similar to the printer not feed paper and ripping upward, then check out these small rollers to ensure that it does not obstruct the paper to move through as expected.

• iPhone 6 GPS | WIFI | BlueTooth low or NO Signal, out of warranty. Options?

  A took my phone in to the apple store 3 days ago, customer service agent said that my phone was weird as the firmware settings being a Verizon phone and no active carrier State. But I've been with ATT and same contract life of this phone, etc.

  He explained that a few weeks ago, I noticed really inaccurate GPS navigation / does not work. Then it is gradually degraded, now he can only determine my region approximate place of about 5 miles. Bluetooth started getting weaker and weaker to the point where it must be my headset in 2 PI or he cutt out / disconnects.

  WiFi is probably about 50% of what it was before regarding the speed and battery life, it seems the least affected but still very visible, will all the minutes and include to reconnect.

  We did a full AND fresh network iOS install and set up as a new phone, I have not restored from backup because I wanted to see if it was a software problem. But this isn't the case, because questions are still there even after reformatting.

  The iPhone is about 2 months out of warranty, what are my options? I see that you can send it in for repair, but I can't really go without a phone for 3-5 days. What is the cost of a replacement unit, all out of contract price?

  Ideas, any help would be greatly appreciated. My upgrade to pro rata happen att just before the iPhone 7 which is close but still a little further, trying to figure out how to wait outside until then with the least pain and money spent.

  While you were on the Apple store, you should have summer offer an out-of-warranty replacement. It would be kind of replacement and the cost for an iPhone 6 would be to $299.

• OfficeJet 6830: out of warranty repair

  I have a 6830 who had a problem with printhead. I use the HP system failures and offered to repalce the printer HP as it was for 11 months in a 12 month warranty. I received the replacement printer which was a unit REFURBUSHED. I installed the replacement unit and it worked for about 1 week. At this point, I have a scanner error making the device unusable. At this point, I'm now outside the guarantee the guarantee is related to the original printer. I still go through the online troubleshooting system. He rejected me after entering new serial number to be outside the warranty period, which is still based on the original unit.

  A little, I have a problem with this strategy. Not only has HP me sent a unit refurbished, but it was not properly fixed at HP.  Now, I can't find a phone number to speak with a representative to see what they have to offer and to feel, they hide behind their support online self-service system.

  One has a similar experience? How it was resolved. What is your feeling on this issue. Any with any suggestion or solution please offer! Thanks in advance.

  Hi @bpdonovan,

  Thank you for your participation in the Forums of HP Support! This is an amazing site to ask questions, to find resolutions and work with the community to solve problems. After reading your post, I see that you have analysis hardware issues with your printer that has been replaced in fact once. I'll be happy to help you with this.

  First, the old printer that was replaced had gone out of warranty and has been replaced by another printer. Whenever the printer replacement occurs, the customer gets a 90 days warranty for the printer replaced by default. So if this printer replaced within this 90-day warranty, please contact the HP support by phone to get the printer serviced by visiting this link: http://hp.com/contacthp please select the country and language. Please enter it # replaced the printer product and follow the on-screen instructions to contact phone are supported.

  I hope this helps! Please keep me posted about it. I am happy to be always at your service. I really hope that the problem is solved without hassle. Thanks for being a part of the community of HP and if you need more assistance made me know and I will gladly make all that I can to help. If you want to say thanks for my effort to help, click on the ""Thumbs up ' to give me a "Bravo" and also please mark as "Acceptable Solution" If this helps. "

• How to send for repair if out of warranty?

  I bought a H5630 projector in 2010. Many pixels have start blocking in the last 2 weeks (maybe a hundred). Its caused by stuck mirror, something to do with being deffective DMD chips.

  Fleas DMD guarantee is suppose to be ok, the projector itself is not. How can I set a repair (im willing to pay for it) and get details about it if the warranty is voided. Web site always speak of 'use out of warranty support' when support will always lead to a wall saying ' guarantee is zero we can do anything "." This isn't what I call simple tech support...

  But anyway, I just want to ask acer for a price to fix (and bulb changed at the same time if possible).

  Thanks for your help.

  OK basically I looked again, went through the website and finally received an email, got on the phone here and here is the solution:

  -Appeal to their technical support

  -To change a DMD thing or anything like that, they charge a fee of like $ 208 to change it... in itself this isn't really a good price, but the trick is if you change the DMD and the bulb of the lamp (must be dead) then its... $ 208, not to say im just going to wait for the die of the lamp as its good enough for the total.

  Guy on the phone was helpful, thought I'd share the solution I finally get their hands on it.

• Cost of recovery disc (all?)? Hard drive just died out of warranty

  DV7-3065DX, 16 months old and HD died a few days earlier, totally dead. I ordered a replacement, but now that I am out of warranty and of course I have no operating system (as it was on the disc now dead), can I order the disks with a discount at HP? Their office is closed now. Can I get Windows 7 family of Amazon for about a hundred bucks, but as I have a valid key on the back of this laptop hate the idea of paying for an OS I used legitimately. Thank you!

  You can order a recovery disc of HP for around $ 16. The game will reinstall Windows and all original drivers & software on the laptop.

• Yoga 2 inches 11 cost of out-of-warranty battery replacement

  How much does it cost to replace the battery for the new Yoga 2 11 inches when you are out of warranty? Batteries die within 1 or 2 years about and at this time there, you're also out of warranty the standard warranty of 1 year. I'm looking into buying a portable Yoga 2 11 inches and a part of the decision-making process between this and other brand of PC or Macbook is how much it would cost to replace the battery, since it is a non-replaceable by the user stack. I know that with Apple, it's $ 129 to replace the battery. This information is readily available on the Internet. However with Lenovo, this information is not available everywhere.

  I have already contacted on the phone the Sales Department, which is unclear and transferred me to the tech Department, who told me that the parts or sales would have that information. When I told them that the sales referred me to tech, I was transferred to pieces. Parts told me that they need the serial number to give me an accurate price on the drum part, but since I don't, I told them that I'm interested in the Yoga 2 11 inch model to which they said they can't give me a price because they cannot know with certainty what is the part number. Yet once I tried sales, this time via online chat, and once again, they have no information and referred me to tech or contact a lenovo reseller.

  So nobody knows how much a battery replacement cost? Somebody should know since I do not know those charged to get their battery replaced some time down the line. I think it's a simple question, how much does it cost to replace a battery for the battery and work when you are out of warranty? Thank you

  Hello

  part numbers, you will need are 121500224 (lg) and 121500223 (simplo). for the price, I suggest you call again support.

  I hope this helps.

• HP Pavilion n012tx: how much RAM can I add to my laptop? If I do it myself, it will go out of warranty?

  I want to increase the RAM of my laptop. It has a 4 GB of ram that is not able to handle some tasks.

  1. I was wondering how much memory can I add to my laptop?

  2. what will be the cost of improvement for a chip of 4 gb of HP service center?

  3. If I do it myself, if my laptop is out of warranty or not?

  Please write a reply only if you are sure.

  Good news for you. The memory is expandable to customer. There is an easy access on the bottom door. See page 47 here.

  Manual

  You can switch to 12 concerts by adding a 8 GB module in the empty slot. Adding a 4 GB module might actually be good too because the memory will run in dual channel, which is a bit faster. Not too many tasks really need more then 8 GB of RAM.

  This is the number of HP part 4 GB module you need:

  Module memory 4 GB (PC3 12800, 1600 MHz) 691740-001, which looks like this:

  

  2 things are important. It is memory (DDR3L 1, 35 volts) low voltage and low density because of the 8 black blocks. Be sure to get the type of memory, so it's guaranteed compatibility.

  This video will help you:

  https://www.YouTube.com/watch?v=L7FvZ-JduRM

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Activate vista after failure of computer acer laptop (acer would not out of warranty)

  If anyone can help with this, we would be greatfull. (acer would not out of warranty) installed the hard drive in my office so that we don't lose our data and now vista needs wake-up, but we have not all labels on the laptop with this subject activation key.
  We have received for the purchase of the laptop but how do we get a new key for her.

  Computers/computer, Acer laptop are Vista OEM licenses.

  If Vista was preinstalled on your computer/Laptop(which it did), it is classified as an OEM license and is not transferable.

  The license of Vista OEM is related laptop computer/computer originally installed on and dies with the computer/laptop.
  You cannot transfer it to another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• What to do if your print head is in or out of warranty.

  First use the post linked below as a reference to determine if the print head is in or out of warranty.

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead/how-to-determine-if-your-printhead-is-STI...

  For the in guaranteed print heads:

  Contact the HP technical support to have the printhead replaced.  You can contact them at the 1-800-474-6838 to the United States and Canada, international users, click on the link below.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  For guaranteed print heads:

  Since the print head is out of warranty, you don't need to worry about voiding the warranty, which means you can do a physical cleaning the printhead without worry.  You should only do physical cleaning if you have a problem of quality of sever, have a faulty alignment problem, an ink system failure, or you lack color and a mechanical cleaning does not work.  Bob_Headrick was kind enough to make the post below which describes the steps to physically clean the print head.

  http://h30434.www3.HP.com/T5/other-printing-questions/HP-6500-Office-Jet-E709a-black-printer-cartrid...

  If your problem is still there after a, you can either contact HP to try buying a new head of printing, or you will need to buy a new printer.

  I hope this helps.

• Out of warranty printer

  Hello

  How to get help from HP when my printer is out of warranty.  When I click on send makes us - me for my printer model number so that they can check for warranty.  My printer is Officejet K550 pro which is an old printer.

  Hello

  To check the warranty HP must know the number of your printer (Please do not post here). If out of warranty, you will need to pay for support. BUT this forum is free and a lot of people here are likely to help you.

  Kind regards.

• defective hard drive out of warranty

  I want to install a new hard drive in my 4 years old Mac Mini. It is out of warranty. The hard drive has failed. Installation seems pretty easy, but once I have change the old hard drive with the new, how to restore the internet of the OS. I don't have a recovery disk.

  Assuming that your model never came with a DVD of recovery:

  Clean Install of El Capitan on a new disc

  1. Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.
  2. The Utility Menu appears in 5 to 20 minutes. Be patient.
  3. Select disk utility, then click on the continue button.
  4. When loading disk utility, select the drive (generally, the entry Out-bumpy) in the list aside.
  5. Click the Partition tab in the main window of disk utility. A panel will fall.
  6. Set the GUID partition scheme.
  7. Define the type of Format Mac OS extended (journaled).
  8. Click on the apply button, then click the fact when it is active.
  9. Quit disk utility and re-enter the Utility Menu.
  10. Select reinstall OS X and click on the continue button.

  This should install it the version of Mac OS X that has been previously installed when the computer was new.

  [Permission to use any part of the foregoing has been granted by khati, exclusively, to theratter.]