So slow connection wireless but ok with dongle...

Similar Questions

• PC won't connect wireless but with a wireless printing?

  I have windows XP and my PC won't connect wireless, but I can print wirelessly from the PC. This has happened once before, but Microsoft is not going to help me this time.

  Hello

  Please follow the steps in the link

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• Computer Dell laptop connects wireless but not online

  I have a Dell laptop that I bought about five months ago. We just bought a router wireless about two weeks ago and it was working fine until a few days ago, when the internet connection is slow all day until we have reset the internet modem itself. That day, my computer wouldn't connect to the internet after a few hours of surfing on slow internet. After that reset us it, he started to work very well. Then, the next day it was working fine until it just stopped to let us browse the internet. My desktop computer that uses a USB connection wireless and the Xbox 360 with WiFi, both work. Now, I pressed my button wireless countless times, and I am connected to my network with almost full bars. Some of the software on my computer can connect to the internet, as the update of windows, but I can't use any internet browser - I use Safari, but I tried as well IE. When I look at the plan of the connection, there is a line dashed to the router from my computer, but he always says that I have full internet access. Has connectivity IPv4 and IPv6 is not. I tried to uninstall my card, but it did not reinstall rebooted once and I undid the system restore I had tried a few days earlier to pick up my internet. We also tried to connect with an ethernet cable - says there is connection, but also will not let me do anything. Also, I ran diagnostics on my cards and Windows said reset, but I still have the problem and it "resets" whenever the diagnostics are executed. IP address of my router starts with 192. I've searched and searched for answers, but nothing works.

  The new answers?

  Hello

  Try the following steps:

  
  Step 1: first of all, temporarily disable the firewall settings and security software and check if it makes a difference.

  
  NOTE: Please check you to re - activate the anti virus program after reviewing the issue.

  
  Step 2: make sure you have the latest updates and service packs for Windows Vista.

  Reference: http://windows.microsoft.com/en-US/windows-vista/Install-Windows-updates

  
  Step 3: battery Reset TCP/IP.

  To reset the stack TCP/IP go to this article and click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• OfficeJet J6450 - printer connects wireless but does not print job cable modem replacement

  Material: My printer is an OfficeJet J6450. I am running Windows Vista, current update.

  Probably triggering the event: I replaced my modem docsis 3.0 with a doscis 2.0 modem. PSI has remained the same. All other software and firewall remained the same.

  Dysfunction: After the replacement of cable modem, I found that I could print is no longer in my HP OfficeJet 6450. I would get an error in the printer window ' error - print. "  After the reboot after the publication of the initial error, I would get the error "error - sent to the printer.

  What I did:

  As a first step, I've uninstalled and reinstalled the HP software for the printer (complete package with exception of PhotoSmart and HP customer monitoring program).

  Use the connection for the network printer wizard, I entered the router password wireless to the printer. At first I don't have a connection. Then I rebooted the computer and the printer. I also returned to the default setting of network on the printer and repeated the configuration of the network. The connection was finally successful.

  The automatic test of the network page and the network printer wizard confirms the connection. Digital display of the printer and the HP diagnostic utility has also confirmed the connection. But the diagnostic utility is unable to print a test page and throw an error - "Print Test failed.

  The result disappointing:  I still can't anything to print wireless.

  ... Thanks in advance for your suggestions to get my printer back on...

  Go to start > Control Panel > printers and delete all instances of the printer.

  Then re-add the printer:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.  Get IP address of a Test of Netowork wireless on the front of the printer (usually in the network menu).
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Laptop can connect wirelessly, but not through cable utp to the internet. Help!

  I tried to connect my computer laptop windows 7 to the internet using a utp cable. Unfortunately, without success. Works with wireless, but in my dorm, I cannot use internet via cable. I tried to turn off the wireless, but that did not work either the comouter does not recognize that the cable is already connected. Please help me solve this problem.

  Thanks for your help in advance! :)

  I would check the cable carefully.  Sometimes, some of the wires are loose from the plug.  See if the laptop can connect to cables in other places.  If possible, the problem is with the cable and not on your computer.

  Good luck.

• 5532 ENVY: ENVY 5532 has a connection wireless but not recognized

  My printer is showing a Wi-Fi connection (the light is solid and blue).  I ran a test report and all past with a very good signal quality.  When I try to print from my laptop or iphone, I get a message indicating that the printer is not connected (on my laptop) or no airprinters (on my iphone).  Before last night, everything printed fine.  You can provide any assistance is greatly appreciated.

  Hi @shaunaB44,

  Welcome to the HP Forums!

  I noticed that you can not connect wireless printer HP Envy 5532 for your Mac OS X 10.10 Yosemite. I'm happy to help you with this problem of connection!

  To confirm that your printer hardware is working, you are able to print a test page from the printer control panel? Video: print a test page.

  You see error messages on the display of the printer?

  In the meantime, try the steps in this guide, "printer offline" or "printer not responding" Message (OS X). And let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope to hear from you soon and thank you for posting!

• HP Deskjet 3522 connected wireless but windows 7/8 can't find the printer

  First day, I installed and updated the printer and the software and it worked perfectly, I could print wireless and email with eprint and print it out.

  The day after the computer could not detect the printer,

  Here is what I tried:

  • I tried to uninstall the printer and install again
  • factory reset
  • connect with WPS
  • installed with usb, and then try again to convert wireless
  • I set up the connection manually and also for the software settings to automatically
  • I tried the scan doctor
  • I tried with another computer
  • reset the router.

  and nothing has worked. The printer indicates that it is connected, the only thing I can do, is that it works with the usb and send emails to the printer, then it might print "wireless".

  Hi alex-86. A hard reset is accomplished simply by unplugging the printer while it is on and then with 30 - ish and plug again. I'm not sure that this will solve the problem that you are familiar with. If she works initially then stopped, you can consider power cycling your router as well.

  It is a fairly comprehensive list of measures you should get back up and running. Let me know how it goes.

  http://support.HP.com/us-en/document/c03388454

• My toshiba satellite pro is connected wireless through a 3g dongle but I can't seem to print on my epson BX600FW printer despite the use of the ad-hoc method

  I am really struggling to connect and print wireless. I rang EPSON who suggested that I connected using the AD-HOC method. This method applies to the use of a laptop computer and a wireless printer but without router.

  You are therfore impression on an AD-HOC (as and when) basis.

  I followed the instructions and created an AD HOC network. The 3g dongle works wirelessly and I can use internet. He told me that the signal strength is excellent. But when I try to print there is no answer. He just informed me that there is no network connection.

  I've been around the houses of connection / disconnection to nothing does not. If I tried to remedy the situation from now until midnight, I'd be no closer. Me, that I tried to believe you. So folks, has anyone got any ideas? If I thought that buying a router, that it would be useful, I'd be out immediately and buy a.

  Any notice received with gratitude. Thanks in advance.

  Hi charleskeen,

  ·         What operating system do you use?

  ·         Have you ever been able to print before?

  Some printers require the initial Setup wired print wireless.

  Make sure you have the latest drivers as well.

  http://eSupport.Epson-Europe.com/ProductHome.aspx?LNG=en-IE&data=YZnBT5wk60ZjizmYmgWduFmKu3QiLmBK&TC=6

• Connected wireless but no access to the network

  I recently did a system restore and now I can connect to the wireless network or cable network but can not access google, msn, etc..  I can boot mode safe mode with networking and everything is fine - when I don't reboot - no joy.

  Help!  I have Norton, but he does not resemble his execution.  It's XP 32 bit, I have a router wireless netgears.

  Thank you

  Hello okiannie,

  There is a chance that Norton has been corrupted when you performed a restore of the system. I suggest try to uninstall & reinstall Norton first. You can use the Norton removal for this tool: http://www.norton.com/symnrt. After having reinstalled Norton, please check if you face problem with connecting to google & msn. Let me know how it goes.

  Thank you!

  Harry

  Norton support

• Officejey 8620e Pro: Officejet Pro 8620 connect wireless but not visible by any other device of

  Printer was fine for 9 months.  That is, Apple devices could print using AirPrint.  Computers laptops MacBook Pro and Windows 8 were also very good.  But now printer is not visible by any device when trying to print / set up a printer.  Finally managed to do work with a USB cable, but it's not practical for all members of the family.  Have you tried:

  Full power reset

  Reset wifi

  Updated drivers

  Recycled all devices that are used to be able to see the printer.

  To confirm, the printer says that it is connected to the wifi & AirPrint and wakes up when the control panel is touched.

  Thanks in advance

  Hello @Insightful_Chap! I'd love to help you with your Pro Officejet 8620.

  I understand your description that the printer is connected to your network, but is no longer visible for your devices. Although the printer is connected, I would allows you to use the following document to solve the problem as it will guide you through the necessary steps: HP Officejet Pro 8610, 8620, 8630, 8640 and 8660 e - all-in - One Printer Series - printer does not maintain the wireless connection.

  Please let me know the results of your efforts and we can go from there.

• VAIO w / Vista connect wireless but I can't access the internet on my router

  Help.  I have a SONY VAIO with Vista.  Just totally reformatted.  I can access my router (NETGEAR WNR 2000v2) locally, but cannot access the internet.  Curiously, I can connect to unsecured networks and access to the internet.  How can I solve the problem with my router/computer? I removed the 3rd party (Norton) security and made a few other commands nothing done. (BTW - I have 3 other devices that work fine on my wireless router.)

  Hi barry909,

  ·         You get the error message?

  Follow the steps in the article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Reference: http://windows.microsoft.com/en-US/windows-vista/Wireless-networking-frequently-asked-questions

• Unable to connect wireless Bluetooth keyboard with the iMac

  After researching for a numeric keypad for my iMac (OS X version 10.6.4), I decided to get a keypad wireless Microsoft due to many positive reviews from Mac users. I tried to connect the camera today: 1) turned on the numeric keypad) 2 Mac software came on and recognized 'Microsoft BlueTooth number Pad' 3) a password has been generated) 4 ' synchronization attempt failed"I tried several times with the same result.  I realize that I am a Mac user, but I would give it a try since the system of thought is a Microsoft product. Any help would be appreciated because I would REALLY use it!

  Hi mfranken.

  As you have is on Mac operating systems, I suggest that you contact Apple for assistance.

  http://www.Apple.com/support/osFamily/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• OfficeJet pro 8600 more connects wireless, but does not connect to Internet

  I use Windows 7.  The free thread is ideal for printing, but I do not understand why the web

  does not connect.

  Hi susea;

  Hope you are doing well and I'm sorry that you are having problems.

  Jean-Marie this tool;  http://support.HP.com/us-en/document/c02037530

  If that didn't help then share what router you're using, please indicate brand and model? I'll offer to make sure that your router is updated with the most recent firmware, also I personally always use Google's DNS servers. Some servers DNS provided by your ISP (Internet service Provider)

  You can change this setting by going to do the following:

  Press the Win key on your keyboard.

  1. Type Ncpa.cpl (this will take you to the network connections)
  2. Select your wireless connection
  3. You will see a screen on the botton, you will see a button called properties, near the left button
  4. On the Properties menu go to IpV4 (if you don't see scroll down) double-click to open
  5. In this screen, you will see (get IP address automatically) slot that you wil see the Obtain DNS server address automatically select this option
  6. Type 8.8.8.8 and 8.8.4.4 airfield

  I will also choose a static IP address, and this can be done here as well.

• Windows Vista 7 and HP Officejet Pro 8500 A910 connected wireless but does not properly

  I just moved in with roommate and wireless to connect to Windows Vista 7 with HP Officejet Pro 8500 A910... when I select print test page or a document to print, the printer and the computer are connected and respond, but instead of the test page or document the printer starts printing of dozens of pages of AI computer jargin: % BeginProlog %. : file Pscript_WinNT_ErrorHandler 5.0 0/currentpacking where{pop/oldpack...etc etc... This jargin continues for more than several pages. Anyone know what is the problem and how to fix?   Thank you, cropcircleguy

  Hello

  Please visit the link below to fix the problem.

  http://whp-Java.extweb.HP.com/ewfrf/wc/document?DocName=c01954177&LC=en&cc=us&DLC=en

• Photosmart Premium C309m cannot connect wireless, but Setup is OK

  I felt for a few months and in the last days he stopped wireless connection. I use Windows 7 and restored to the previous time, but it has not fixed the problem. I've uninstalled and reinstalled the software, turned the printer power button etc but it's the same question.

  When I open the HP Solution Center, I get the message saying the printer is disconnected. If I go to the printer and use the Network Wizard it can communicate with the router and I get a Test report saying 'congratulations etc etc and everything's a pass

  Looking at the config menu router you can see that the printer is there but its status is not active.

  The IP address remains the same, but when I look for the printer on the network, McAfee I can't.

  Any ideas?

  OK, rented DSL routers are, well, problematic.  Sometimes the DSL providers have more control on their router like the printer.

  -Unplug the phone line from the router
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the router.
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you do not know, use the current IP address.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the white gateway and DNS
  -Finally, connect the telephone line, restart the router and the test.

  In addition, WEP is quite sure.  It can be broken with freeware in 10 minutes approximately.  You can change your WPA or WPA2 security type?