SONY should 'go' trigger 'in camera' radio... LEAD market

Similar Questions

• NI1433 trigger camerlink Cam

  Hello

  What to do | : the ni1433 should trigger a camera above the line of CC1. Are there examples in the web?

  I can set the camera to switch with the command CC1 source, but what VI is used?

  Help-> find examples

  There are examples in there to trigger the 1433.

• Integrate the external trigger into camera (PCI-1424)

  Hi all

  I use a PCI 1424 acquisition card to take the image of a Kodak "camera".

  Currently, I put the camera on a continuous mode - in which the camera give me frames one after one. I am able to 'snap' or 'capture' images of MAX with the help of the camera file. I can write a simple VI for 'break' a single image in LabVIEW.

  Now, I want to go to the single camera viewing mode. In this mode, the unit will display a single image to a trigger signal (the rising edge of a singal TTL).

  I wrote a short program for parallel port allows to send this signal triggered at the camera. The increase in power to the camera temporialy, I know that the camera captures an image.

  However, the question is how can I nathalie caron this image?

  What I do now, is to select 'snap' a picture to the MAX and allow a delay of 10 sec. After you click on the snap, I'll go to LabVIEW and send the trigger signal to the camera.

  However, in MAX, I altenativley had a black and white image that is of the Court a false image.

  does anyone know the reason?

  and how do I integrate the VI trigger in the captuire VI image, so that I can finish the task of single capture inside a VI?

  There is a sample VI "Grab.vi triggered" in which user can set waiting time and other properties for IMAQ1394, but I do not know how to PCI1424

  Thank you very much.

  Dear John,

  I have attached this VI.

  LabVIEW 7.1

  Framegrabber: PCI 1424

  Trigger the camera: after set us the camera in mode single shot (by rider material), I just need to send a signal of TTL and the camera will trigger in the front of this signal. So I schedule a pulse to the OID 0 pins at this TTL signal output.

• the trigger for camera AVT Pike-based software

  Hello

  I'm using labview 8.5, as well as the acquisition of vision (IMAQ-dx, latest version) software, to control a cross beam motion detector and AVT pike camera using a high speed cable IEEE 1934 (800mbps) b.

  I wish to have a trigger internal (software) control system and have no problem to get Boolean cross beam sensor signal or run indepedently of the camera (about 300 FPS).

  The problem is the trigger.  I have a problem with where to put the camera vi in the relation to the probe wiring diagram.  In the image as an attachment, I have the sensor in a loop and the camera, in a nested loop.  However, when I trigger the camera manually with a push button, the sensor stops running.  And when I try to control it with the sensor instead of the push button, I can boot, but cannot stop the camera.

  Basically, I just want to know if there is a method of internal trigger to control camera image recording.

  Thank you for your time,

  Veritas

  Ah yes! just before I read your reply I tried... and it certainly helped.

  Thank you!

• Computer laptop Sony VGN-FZ35G built in camera doesn't work after upgrade to Windows 7

  I bought the laptop Sony VGN-FZ35G Arab Emirates UNITED in 2007 or 2008. It originally came with Windows Vista. Later I've updated with Widows Vista Ultimate and had the driver installed for its construction in camera. It was working fine. Recently, I upgraded my computer with Windows 7 Professional and built in camera stops working. The info on screen is 'the driver is used by another program. I can't trace what program uses it?

  Perhaps your Vaio is not totally compatible win7, did you visit Sony support and update the camera application?

• Sony DSC-S500 6MP digital camera does not

  What do we do when the camera does not work at all when we bought a new laptop with Win 7 64 bit? All Solutions for this problem as I don't want to buy a new camera or a Downgrade? Microsoft must help the community as soon as possible BECAUSE they don't do anything about this problem, a lot of people are asking the same Questions but NO answers. You may have a Solution as my brain is finished surfing the Web.

  Sony DSC-S500 6MP digital camera

  You are looking for a Solution on Windows 7 64 bit drivers work only not with this device? Any solution yet
  Email me @ * address email is removed from the privacy *.

  Sorry all my Confusion, I have posted on the Sony site, they finally answered - sorry for my mistake. We will keep you up-to-date, however. I think personally that they may move the camera (or something) - but 4 years old but I love it so much.

  I did come, right, working on a 32-bit computer to Get all my Photos Off, so it's just barely a few Prosess as I need to ask my finances to Borrow laptop Het to copy of My Pictures and then use A Memory Stick to copy it back to my new laptop computer.

• How can I sync 2 sony AVCHD images from the camera on the "date" as a prelude and import it in first pro?

  I have 2 sony camera popular with the AVCHD file structure. The two cameras are the same. How can I sync 2 sony AVCHD images from the camera on the "date" as a prelude and import it in first pro? Im working with 6.0

  
  

  Now I see the date taken in the import screen until I click "ingest". When in the trash, this option is there, but no metadata in there. It is therefore impossible to import images from two cameras and have these sorted.

  
  

  How can I get this sorted out before, so I can export for the first?

  Thank you. Tom van den Dool
  

  Hi Tom,

  How can I sync 2 sony AVCHD images from the camera on the "date" as a prelude and import it in first pro? Im working with 6.0.

  Sorry, you can not do as a prelude. You can request a feature here: http://adobe.ly/feature_request

  Thank you

  Kevin

• How to disable the sound of recording at intervals Photo capture for the Sony HDR-AS100V POP Action Cam

  Hello

  Im trying to find out if there is a way to turn off this annoying noise of capture for each photo of the action cam Sony made in mode photo interval. It uses the power of the battery to make the shot so that draws attention / distracted when it is implemented in a public space.

  Please let me know what could be done.

  Installation, configuration, beep, stop program

• How to trigger the camera and light pulsed with PCIe-1427

  Hello

  We recently bought an acquisition card NI PCIe-1024 and the NI Vision Builder.

  I am new to imaging applications and need support to get started.

  Application:

  We have a camera viewing a scene which is illuminated by a pulsed light source (e.g., a strobe).

  We want to use the PCIe-1427 as the master for the outbreak of the camera and strobe light.

  The first trigger (Ch 0) transmitting signals TTL to camera to 30 Hz (30 fps).

  The second trigger (Ch 1) send bursts of pulses to the strobe light to e.g. 10 kHz. This trigger must only send impulses all other images, so that we can save alternating light and dark images in order to perform background subtraction.

  I tried to set up the channels of the trigger and create virtual channels in the measurement and Applications Explorer, but apparently this is not possible.

  Since it is an application critical time, I'd appreciate an example vi that sets up the channels two trigger and download managers in the camera to get started on this application. Thank you.

  Software of NEITHER: LabVIEW version 10

  Materials: Device for the Acquisition of Image (IMAQ) PCIe-1427 driver Version: NOR-IMAQ 4.4 OS: Windows 7

  Thank you, Justin.

  I'll copy this request to the machine Vision Group as you suggested. I looked at the link sent you me and made progress (limited). I can see on an oscilloscope trigger signals, and the camera acquires images. However, I only managed to do work for pulse trains continuous, not a shots or bursts of pulses.

  No need to answer that. Thanks for your help.

  Peter

• Sony DCR TRV 19 video camera connected to Vista with USB

  I am very frustrated.

  I have reciently updated my computer with Vista and have xp on my lap top and my office.

  I'm mad at Sony or Vista for not having an option for a driver. Does anyone hava any suggestions as to how to operate with Vista windows moviemaker for download videos from my Sony camera DVR to vista.

  Thank you

  Rick

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  The drivers are written by Sony for their products, not from Microsoft.

  Contact Sony with their product.

  Cheer.

  Mick Murphy - Microsoft partner

• My old Minolta A-type bayonet lenses will fit the Sony Alpha and the Nex cameras?

  I have an old minolta slr camera if Qt I bought different for glasses.  I would like to know if they will fit the new Sony Alpha and Nex cameras?  Please notify.

  A type bayonet mount are compatible with our current SLT models. THE EA3 / EA4 THE adapter will be required if you plan to use these lenses with a horse E NEX camera.

  Information on compatible Konica Minolta lenses for Sony devices on this link.

  If my post answered your question, please mark it as "accept as a Solution.

• Newly purchased Sony HX400V images from the camera were of poor quality. Too much grain.

  Hello

  I bought the Sony HX400V Camera 2 days back. During the filming in the correct light, image quality is very bad. While the image is image on laptop when 50% with zoom, it has a lot of grain.

  I tried to film in all available modes to see if I can get the best image quality, but it still shows a lot of grain.

  If anyone can help.

  Kind regards

  Amit

  
  

• Camera (.icd) leader for Dalsa Piranha 4 (P4 - CM - 08K 070)

  Hello

  I try to use the linear scan camera Dalsa P4 - CM - 08 K 070-00-R as well as the NI PCIe-1433 in Labview acquisition card.

  Although there are many different models of Dalsa camera files (in the collection IMAQ driver and here on the website of OR), I have not found one for my camera.

  I tried to create one using the generator files from camera, but without much success.

  Communication series through Camera Link for reading & writing the parameters of the device works well, but I can't get a signal.

  When I use "Snap" Labview or NI MAX, I just get a timeout.

  Here, someone who has experience with Dalsa cameras?

  Thank you!

  Sebastian

  -Very well, it turns out that this device requires just a time-out value absurdly long frame.

  For a window of acquisition of width 8192 he needs a delay of several seconds (even though I read a single line to a line of 70 kHz rate).

  Strangely, the height of the window acquisition is not serious.

  Oh well, thanks for your thoughts.

  SEB

• Sony xperia v problam with camera after software update

  Update my phone to android 4.3 .so when I touch mood.it vedio 'unavailable camera' show it happened only for vedio mood

  Try the settings-applications-all-camera, force stop and erase the data. Restart the device.

• Sony HDR-PJ200E stringing of cam. I would like to know how to use flash. all my night peak are blurred

  All my pictures from nite are blurred, does this model somesettings are something that allows you to adjust the auto flash mode.

  Hi udaykirannag,