SP1 / SP2

Similar Questions

• Is it possible to get sp1, sp2 and sp3 for XP

  I know it's laid before, but where can I download updates SP1, SP2 and SP3 for XP.

  I have the original XP Pro install media.

  I am strongly considering to put XP Pro on a Dell PC I have has no HARD drive.

  I plan to do that because it's basically Win8.1 PUE!

  A HUGH mistake buying a machine with Win8.1!

  It is UGLY, it is INFLATED WITH CARP, it is UNDESIRABLE to the IMO.

  I have need a lot of talk of "insecurity" and any future update. I can't live without them.

  I can't the XP service packs of MS or where ever?

  CHANGE > in fact I found the s SP just now install media.

  I found the stub thing after that I downloaded.  But I found no later than SP1 stub.  But if the SP1 is not necessary, I can remove it.  Just read somewhere that, in order to get SP3 installed, I need SP1 AND SP2.

  No, to install sp3, you have sp1 OR sp2.

  Yes, the news of the "System requirements" on the download page of the sp3 are vague and misleading: "Windows XP Home Edition, Windows XP Professional Edition, Windows XP Service Pack 1, Windows XP Service Pack 2."

  Commas means 'or' - except the comma between the two editions and two service packs, which means 'and '.  The requirements must be written (XP Home or XP Pro) AND (XP sp1) or XP sp2.

  If you don't end up doing this, see the post following MS MVP PA bear first: https://groups.google.com/forum/#! msg/microsoft.public.windowsupdate/4-jCtXsbshs/HBI-0476Wj8J

• Why can't I install SP1/SP2? WindowsUpdate_00000100 error code

  Original title: why I can not install SP1/SP2?

  I get error Code WindowsUpdate_00000100 "/"WindowsUpdate_dt000"when you try to install SP1/SP2 into Vista on my Essentials installation path - how to solve this?"

  Thanks for any help you can provide.

  Hi, TeacherChristi B,.

  Worst case scenario is that you may need to do a repair on your system.

  Thanks for trying to Chaxx what follows:

  (1) right-click on the command prompt window and select run as administrator

  Type:

  REGSVR32% SYSTEMROOT%\SYSTEM32\WUAUENG. DLL

  Press enter

  You will see a message saying that the recording of the successful dll

  Type exit

  retry installation

  (2) start > run

  type:

  Regsvr32.exe c:\windows\system32\wuaueng.dll

  Press OK

  Retry installation

  Let me know.

• After a reset of vista, it was impossible to install SP1 SP2 so

  as stated above - sorry, 1st time here

  After a reset of vista, it was impossible to install SP1 SP2 so. Finally, it was done via remote control by m/s. If I restore to new testament, I have the same problem? (looks and deliver it with the "build" number)

  I don't know because I don't know what was the problem in the installation of SP1 and SP2.  It is possible that the same issue may occur again.  I don't know any specific build of Vista which has particular problems associated with MS, but I'm not a expert on the Windows updates - if Microsoft Support tells you that it is possible that this is the case.  It may very well work the next time, or you may encounter the same problems again - who knows.  In any case, it is really not that you can do about it, unless you want to buy another copy of Vista with a different "build number" so that you can improve the chances that the upgrades will work without any problem (but do you really want to spend the money on that when all it takes) (, it's a lttle help to get install them again the situation would occur again?).

  I hope this helps.  If you have any other questions regarding updates Windows, including Service Packs, please post in the Windows Update Forum at: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the updates, including service packs experts will be more than happy to help you with your questions or problems.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Well, how long it will take SP1 - > SP2 x 64

  I want to upgrade to VISTA ULTIMATE SP2 x 64, 4 GB ram, core when 2 2.5 ghz, SP1, how will it take much time?

  The correct file is:

  http://www.freewarefiles.com/downloads_counter.php?programId=40523

  Who can tell how long must he?  It will greatly depend on the current state of the computer (most up to date it's less SP2 needs to install the updates of Windows) and it will reboot a couple of times during the process.

  http://support.Microsoft.com/kb/948465

  "lse" wrote in the new message: * e-mail address is removed from the privacy... *

  Well, how long it will take to settle down and restarts how?

• Need to download SP1 / SP2 from the web

  redone with windows installation disc

  * original title - I had to redo vista updates work, but have not shown any service pack 1 or 2. I can upload them to the site? *

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  SP1 32 bit.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

  SP1 64-bit

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  SP2 32-bit.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=656c9d4a-55EC-4972-a0d7-b1a6fedf51a7&displaylang=en

  SP2 64-bit.

  Click Start > right click computer > properties > see what version of bits you have.

  See you soon.

  Mick Murphy - Microsoft partner

• WU - XP SP1 - > SP2 Installation hangs after download "Windows XP Informa" displayed.

  HP Pavilion a230n. XP Home came with it. Try to get it current. "Windows XP Informa" one string or is it (part of) a file name? If the latter, I do not know its path to check file attributes.

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that give repair install (upgrade AKA on-site) will NOT fix it!

  See http://michaelstevenstech.com/cleanxpinstall.html#steps or 1 in http://support.microsoft.com/kb/978307 method

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have 3 versions of net framework on my hard 3.5 sp1, sp2 3, 2 sp2 can I delete the oldest and keep the most recent

  I have xp home edition with 3 versions of net. framework on the system ver.2 sp2 worm 3 sp2 and ver.3.5 sp1.my question is can I remove the old 2 versions and just use the most recent one.

  Should need I even older versions of the .NET Framework on my system after installation of .NET Framework 3.5 SP1
  http://blogs.msdn.com/astebner/archive/2009/04/20/9557946.aspx

  Benefits of Microsoft .NET Framework
  http://support.Microsoft.com/kb/829019

• Used to install Windows xp sp1, sp2 or sp3, I have tried everything

  Please help I need windows xp sp2, it keeps the sp1 saying things not supported. so any suggestions?

  Hi Fois5,

  1. did you of recent changes on the computer?

  2. What is the finished message, you receive during the installation of the service pack?

  3. What is the current version of Windows XP sp1 is installed on the computer?

  First check the current versions of Windows XP sp1 is installed on the computer.

  1. click on start, run, type winver, and then press ENTER.

  Also make sure that the computer meets the requirement to install service pack 2.

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364

  The space of hard disk required for Windows XP Service Pack 2

  http://support.Microsoft.com/kb/837783

• How to bring back after restoring Vista SP1 SP2 operating system &?

  I recently used the media supplied with my laptop to restore/reinstall the OS I have a feeling that I don't have it quite right... but my computer works fine. Better than he has for a while. Unfortunately, it's living in the past.

  I had Vista Home Premium SP2 race and now I have only blocks of service of the House of Premium.No. I tried to install SP1 via Windows Update.It takes about 20 seconds. Update history said he "succeeded" but when I look in "Installed updates" is not there. Since then I have "successfully" updated for SP1 20 + times and the only one available for me now (available on several occasions) updated is SP1. My last installed update was September 21. Although windows update history shows "successful" updated all the way up to 15 October.

  In the meantime I had went to the MS downloads site and found the stand-alone (936330 KB) version 5. I tried to install that and it seemed to work. For about 50 minutes. or so he worked there and then it is simply disappeared. Gone.No error message, nothing. I tried again and this time, it still seemed to work, but it has taken longer to disappear this time. After several other attempts, I gave up.

  Since then, I tried a fix to this. Unfortunately, as evidenced by this post, I had no luck. I hope that someone out there has thought about it. I'm reasonably computer literate. More technical it more it receives, but I learn constantly.

  I use a Dell Inspiron 1720, Vista Home Premium, Version 6.0.6000, 32-bit, x 86, circa 2008. Intel Core 2 Duo CPU T5750 @ 2.00 GHz 2000 mhz carrots 2, 2 logical processors.  2 hard drives @ 320 GB ea. BIOS A09, 11/07/2008. Ver.2.4 SMBIOS.

  I'm currently downloading a set of files to install vista home premium 32 bit x 86 with SP1. I hope that it will work. My other alternative is this Dell factory image restore point but I think it'd probably just in the same situation? Help.

  Hello

  I don't know why you have problems with standalones.

  This is the advice that we give the posters who have problems with Service Packs:

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• I'm having trouble installing sp1 & sp2 updates.

  I'm running vista now and need to install windows office 365. Help! Whenever I try to install the updates, I get a message telling me that it will not be installed.

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• facilities of individual components might not be recognized that SP1 & SP2?

  I HAD INSTALLATION ERRORS CONSTANTLY... SO I DID A

  FACTORY RESTORE AND THOUGHT EVERYTHING WAS FINE.

  SP1 SHOWS SUCCESSFUL... CHANGES BACK NEEDS UPDATE AND SP2

  WILL NOT UPDATE UNTIL THAT SP1 IS INSTALLED.

  I EVEN DID THE FIX 947821 FOR INSTALLATION ERRORS.

  I REBOOT AFTER EACH INSTALLATION, SHOWS STILL NEEDS ONE MORE TIME.

  INSTALLATION MANUAL EVEN DOES NOT WORK.

  SOMEONE PLEASE HELP!

  2/25, I tried again the manual installation... rebooted several times, so I thought it was

  work.  Does not appear in the installed updates.

  Whenever before he showed successfully... I thought purhaps I could uninstall and start

  charge... but again once... does not appear in the installed updates.

  If components are installed and SP2 does not recognize

  What SP1 and so will not be installed in sp2?

  Should I do another restore of the system and not let it automatically update... just try

  SP1 and SP2 manual as well as the patches?

  I want a nice clean system before add me RAM and upgrade to Windows 8.

  Can you tell me how to print the page updates showing installed (for my records).

  You can use the tool captures for capturing screenshots from the list of installed updates from time to time & then print that.  See http://www.bleepingcomputer.com/tutorials/how-to-use-the-windows-snipping-tool/

  Or you might see page MVP of my colleague Ramesh-online http://www.winhelponline.com/blog/how-to-print-the-windows-update-history-in-vista/

  Welcome & thank you for your comments.

• Vista updates not defective to install SP1 & SP2

  original title: Vista will be not updated

  I help my neighbor with his laptop Dell 1520 running Vista. She had some problems with IE-7 and I noticed that the laptop has not had a successful Windows at a time update long (do not have SP1 or SP2). I tried several attempts to get the updates to work and finally reloaded the operating system software Windows Vista to factory state - first of the recovery on the HARD drive partition, then a second time since the recovery disks provided by Dell. In both cases, the subsequent updates refused to stick. The first batch of 107 updates downloaded and installed, but then to restart something goes wrong and the system goes into Startup Repair which ends with a system restore. The end result is that many updates end in failure. Never can get past this, even by trying all the updated Microsoft suggested tips (mode boot, security turned off, audit, FixIt, clear temporary files, etc. of disk errors). When I run Windows updates again, I selected 107 updates to be installed again.

  I suspect that I have a HDD laminated, but thought that I would like to ask for help. Any suggestions on next steps?

  Mike T in Virginia

  Hey forum: Got it for update.  Pilots were not common.  Updated drivers and updates started flowing!  Thx for the help,

  Mike T IS

• No sound on Vista after installing SP1/SP2 with Realtek

  Hello.

  I encountered a strange problem on the computer of my parents-in-law office. After an installation of SP1 (and later SP2) no sound stereo speakers that is connected to the computer to an outlet.

  The computer is an Acer Aspire T180 with a built-in audio device Realtek HD (5.1, but the connected speakers are two standard PC speakers), and the operating system is Vista. Before installing SP1, the sound was working properly, and absolutely no software or hardware changes have been completed.

  My troubleshooting so far include:

  -Tested with a helmet and another pair of speakers that I know works

  -I have obviously checked that nothing is cut in all available parameters, or speakers

  -Tried each input/output on the back of the computer, as well as on the front

  -Checked in "output devices" that the speakers are connected and checked by default device

  -Tried the two codecs/drivers available here: http://support.acer-euro.com/drivers/desktop/aspire_t180.html

  -Tried the drivers of avaiable supplied directly from Realtek: http://www.realtek.com.tw/downloads/

  -Uninstalled Realtek everything (both in the Device Manager and programs) and let Vista automatically install the original drivers

  -Disabled the 'digital output device (s/PDIF)"which is in the list of devices in output/game

  -Unchecked the 'detect connection on the front"in Realtek audio manager program

  -In addition, SP2 has been installed, which did not help. In addition, I tried every setting available, uninstalled/installed and so on. During music playback (or test tones Realtek or Windows sounds) all is apparently looking for OK with indicators of volume, jumping up and down, but everything is quiet.

  So I'm out of ideas and cannot understand this. I am very grateful for any help and advice. Thank you!

  Hello

  Make a Restore Point to be sure it works manually. The below indicates how to use VSSadmin to put in place
  and control if necessary.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to turn System Restore on or off in Vista
  http://www.Vistax64.com/tutorials/66971-system-restore.html

  Adjustment of the amount of disk space, System Restore uses for restore points
  http://bertk.MVPs.org/html/diskspacev.html
  How to change how much Space System Restore can use
  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
  http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

  ShadowStorage vssadmin commands
  http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
  http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

  Guide to Windows Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
  backup and at the time when there are high levels of input/output
  http://support.Microsoft.com/?ID=826936

  A good utility:

  Explorer of the shadow - free
  http://www.ShadowExplorer.com/

  ================================

  After doing your restore point.

  Go to Device Manager - click anywhere in the blank area - then click on VIEW - show hidden devices

  Look around your Sound Device - If found click right on - UNINSTALL and when the box appears
  -REMOVE the pilot - REBOOT - reinstall your latest driver - do not forget to check the version of the Device Manager
  that they could rollback and you will need to install the driver - reboot - check until the correct version shows
  upward.

  Also the sound driver in previous posts.

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  No sound in Windows - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• the Vista sp1 sp2 update error, error code: 800f081f

  Hello

  When I try to update my windows vista family premium 32-bit OS to sp2 it says error code 800f081f. I tried installing stand-alone, all trouble shooting steps (anti virus - dye, with some Member States of the tools and c) recommended by the ms tech support guy, but I am not able to solve it, my laptop is dell 1545.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.