Speakers Altec Lansing does not not correctly on HP DV6000 series laptop with Vista

Similar Questions

• Sims 1 does not start on my computer dell laptop windows vista 64-bit?

  I put in the disc, and the splash screen, or whatever, the part where you should be able to hit the installation won't even pop up. nothing happens. I tried to install it but now I can't. Help, please!

  Hello Mhar09.

  Unfortunately, the Sims 1 uses a 16-bit installation program, which does not work on 64-bit Windows.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Gateway MD series laptop with Vista once the challenging 'restore point', white screen, will not start, I tried Gateway system and recovery disks, still can not start?

  Gateway MD series laptop Vista OS.

  I tried to install disks system recovery, ordered the bridge.

  The machine do nothing, black screen, no prompt, no way to install the OS, no start upward

  Hello

  did you put the dvd player must be 1st in the boot order

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  _______________________________________________________

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  http://support.gateway.com/us/en/support/default.aspx

• Help and Support does not work does not correctly when you are connected to the Vista administrator account

  Click the startup of Vista and in the Search box , type WINVER , and press the Enter key on your keyboard.  Please report back with the correctVersion number and build shown . Carey Frisch

  Version 6.0 (Build 6002: Service Pack 2)

  I have the same problem exactly as described Flashimator don't except this: the problem occurs only when I am logged into the administrator account.  Support seems to work normally in my user account.

  I should add that my HP laptop has an OEM program which seems to be an overlay on the Windows Help.  It is also not available in the administrator account.

  (HP Pavilion dv9260us, Vista Ultimate x 64, Intel Core 2 Duo T7200 @ 2.00 GHz, 2 GB RAM)

  Thank you.

  PS It is often more important to have help available when logged in as an administrator as I do only when I have to (as in the resolution of problems).

  Hi Dyn0saur,

  Thanks for visiting the site of the community of Microsoft Windows. In order to focus more on your particular situation, I'll split your post into a new thread.  Son of splitting are made to mitigate the confusion caused by more than one display on similar topics, which allows us to focus on each client individually.

  Regarding your question, see the article following some possible troubleshooting for your question:

  http://support.Microsoft.com/kb/917607

  In addition, an article on content help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-the-latest-Help-content

  Thanks for visiting the site of the community of Microsoft Windows.

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can not install the KB2530548 update on laptop with Vista SP2

  I use a laptop with Vista SP2 - cannot update and install the following KB253 548 and switch of IE8 to IE9

  Hi DericKemp,

  1. what happens when you try to install the update?

  2. you receive messages or error codes?

  You can check which version of Internet Explorer is installed on your computer.

  Find out what version of Internet Explorer you are using

  Step 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  Step 2:

  You can also check out the following link and try to install the stand-alone update package.

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2530548)

  Hope this information is useful.

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• disc eject does not correctly persist

  I get several error messages that my external hard drive was not ejected correctly. I ejected it, turned off, unplugged and then reverse the process. Whenever my screen locks when I open it there are several messages not eject disks does not correctly.

  Restart your Mac, and then drag the disc on the desktop for the external drive to the trash.

• HP jet 7500 a desktop: office jet 7500 a print does not correctly

  Hello
  After you run the print doctor, cleaning and aligning the print heads that it is still print does not correctly. the first page comes out perfect so the print quality gets worse, with bits wilted and things missing. just print a page of print quality and black looks at all and the first steps of pink and yellow are strong, blue stripes and then 2nd very faded pink and yellow bar.
  any ideas?

  Hey watch this video of HP, how do I solve this https://www.youtube.com/watch?v=c422Q-EhMXI if this fixed your problem can you give me a point of congratulations. Thank you

• I have an index page that does not correctly load the css and css works on all other pages of the site.

  http://www.boulderridgecondos.com/ does not correctly load the css, but all other pages of the site loading the css correctly. There is nothing (that I can identify) between pages.
  http://www.boulderridgecondos.com/news.htm

  I guess something is wrong in the css, I inherited this site and have exceeded the css but can't find a problem that would cause this to happen.

  Any help or suggestion looking for something would be appreciated.

  This page is saved in UTF-16 format (Content-Type: text/html (UTF-16 BOM, litte-endian)) in your text editor. The CSS file is sent as ISO-8859-1. Firefox fun to see all the files in the same encoding. The other pages are send as ISO-8859-1 and so use the CSS file. You will need to re - save this page as ISO-8859-1 and download the corrected version.

• Satellite A200 does not correctly reduce or increase the volume

  Hello

  Our Satellite A200 is having problems with its Volume control wheel.
  If I turn the wheel (on the left or in the past), it does not correctly to reduce or increase the volume level.
  He jumps rather the volume level in seemingly random directions (with a preference for the volume).
  Turn the wheel slowly improves responsiveness a little, but it remains quite impossible to increase or decrease the volume control that to be.

  BTW, I am well aware that the volume control wheel is a wheel of puls-encoder rather than ye olde potentiometer.

  -Can anyone you tell me where I can find the configuration that is responsible for this Volume control wheel?
  -Which driver/firmware is attached to the order of the volume control?
  -How can I determine if this is a hardware or software problem?

  Advice would be welcome.

  Stephan

  Hello

  There is no software or hardware problem.
  It is a new generation of volume control.

  First of all there is no mechanical limit turning right or left.
  In addition, this volume controller works a little different than the old volume controllers. The volume can be increased and decreased using the fixed rate

  By the way;
  > Can someone tell me where I can find the configuration that is responsible for this Volume control wheel?
  You can change the volume as in the sound settings that could be found in the control panel.
  > Which driver/firmware is attached to the order of the volume control?
  Audio driver controls the volume controller.
  > How can I determine if this is a hardware or software problem?
  There is no problem

• error code 259 does not correctly updated to sp62736.

  I have a Hp Pavilion 500-141ea im trying to update the IDT audio driver for windows 8, I supported SP sp62736, it passes through the installation procedure, then it stops and comes up with this error code 259 does not correctly updated, I even disabled etc still the same antivirus software.

  Any idea?

  Hi Apache1968,

  If everything works at the moment, with the exception of downloading then I would leave it as it is. The whole "don't mess with what works" thing.

  Thank you

• Why is one of my 4 5893 Modules doesn't work does not correctly?

  Hello

  This is the configuration of my HW and SW:

  LabView 2013 SP1

  1 x cRIO 9076

  4 x NI 9853 CAN Modules

  CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

  So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

  While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

  I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

  I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

  Thanks for your help

  I solved the problem, it was an error of configuration on my side.

  The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

• Update KB976902 now the mouse doesn't work does not correctly

  I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

  The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

  I did a restore on a single computer, but it did not help.

  Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

  NB: If a step said to reboot, reboot!

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• DV6 quick launch button mute does not work properly. He puts the speakers muted, but does not change color.

  Laptop quick launch mute my computer Pavilion dv6-1050us button does not work properly. He puts the speakers muted, but does not change color.  It's still orange, not mater if your speakers are on or off.   His other (white) State works because it is white to start windows, but then goes to orange and does not change when selected but by selecting the button speaker turn the speakers on and outside as it should.

  I've loaded and reinstalled the quick launch driver software (sp46731.exe), but the problem is still there.  The problem is about 2 weeks old.   Have not added any new software that I know.  But computer installs updates as received.

  Simon

  Hello

  First download the audio driver by using the links below and save the installer to your desktop.

  Audio driver - Windows 7

  Audio driver - Windows Vista

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation - ignore the warnings that you can see everything that is an earlier version.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Acer site does not correctly display the specification.

  Acer site does not correctly display the specification.

  Example when you click on the link on M5 Explorer - 581 T-6405 please as to the specification of the model of S7-191-6447. Please check

  Thank you bring to our attention. We will ensure that it is transmitted.