Spectrum 132195ca: WD Passport 1 TB portable drives

Similar Questions

• Toshiba Canvio 3.0 base 1 TB Portable drive not detected in Windows Explorer

  Original title: device

  I just installed a brand new Toshiba Canvio 3.0 Baic 1 TB Portable Drive on my system (HP Media Center PC m8327c), running Windows 7 SP1.  The drive does not appear in Windows Explorer or any other file manager.  In does not show in my START/computer.  However when I run Windows System Information is that there are listed in the components/storage/disks, but do not appear in the components/storage/drives.  He also has not received a drive letter.

  Hello

  I followed the instructions, I received last week and was able to finally see my new Toshiba CANvio drive in WINDOWS Explorer.  EVERYTHING since then seems to be OK.

  I went to devices and printers , and has been able to assign a letter to the reader.

  Hello

  I suggest you to visit:

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  WARNING: If you are not sure that you can safely follow the steps, contact your hardware documentation or contact the manufacturer of the computer or the hard drive before you continue.

• WD My Passport not recognized as drive external HARD on windows 7

  Hello

  I would like to ask if anyone has experienced this and how the address the issue:

  I just bought a WD My Passport Ultra 1 TB and tested on two devices (desktop to Win7 ultimate) and portable Win7 Pro. At first I used it on my desk and it it detected as required WDC but subsequently using the router as its update driver.

  -J' checked the Disk Manager, and he's not here.

  -J' checked Device Manager, it is detected as "Internet access server" (maybe the reason a router driver has been used).

  -J' tried to uninstall the server "Internet access" and restart the system to flush it out

  -The Office again the HDD detected as "Internet access server.

  -J' checked BIOS and it is clearly detected as external WD HARD drive

  After all this I tried on the laptop. No problem and did a reformat of the hard drive so that it can be detected as a disk of expenses by the office. Still no luck.

  Hope someone can help me here.

  Thank you

  Perry

  Hi Perry,

  First of all, check Device Manager to see if the WD hard drive status.
  Right-click on the device and click Properties to check the status of the device.

  Try to connect the WD Passport to another USB port.

  Kindly, follow these methods and check if that helps.
  Method 1:
  Try the Fixit from Microsoft Hardware:

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us?WA=wsignin1.0

  
  Method 2:
  If this does not help, try to rescan the disks in disk management.
  a. right click "my computer".
  b. click 'manage '.
  c. Select 'disk management '.
  d. click Actions and click 'analyze disk '.
  e. find your player in the list in the lower pane. Right click and select "Initialize" and "Add partition".

  Method 3:
  If none of the steps help, then remove and reinstall USB controllers.
  a. disconnect all USB devices except the keyboard and mouse.
  b. click on the Start button.
  c. type devmgmt.msc and press ENTER.
  d. in the Manager device scroll down to USB controllers.
  e. right click each one, one at a time and click Uninstall.
  f. restart your computer now, each USB port is reinstalled.

  Now test the question.

  Let us know if it helps. If the issue persits, we will be happy to help you.

• Spectrum 13D-3000 Downgrade to Windows 7 - driver problem

  Previously, I've killed my spectrum 13D-3000 for Windows 7 Home Premium with the help on the forum.  However, I still have a driver problem, I want to solve it.

  Pilot's Watch "Intel (R) 8 series xHCI HC - 9 31' that is not installed (Code 28) with yellow! icon.  Hardware ID values are:

  PCI\VEN_8086 & DEV_9C31 & SUBSYS_1911103C & REV_04
  PCI\VEN_8086 & DEV_9C31 & SUBSYS_1911103C
  PCI\VEN_8086 & DEV_9C31 & CC_0C0330
  PCI\VEN_8086 & DEV_9C31 & CC_0C03

  Thank you for your help.

  Hello:

  This is the USB 3 controller that needs a driver.  It should work...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127803-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

• Update portable drive to SSD, problems with the installation of operating system and recovery system

  Compaq Presario CQ71, (model CQ71-317EA) portable system, Windows 7 family 64 - bit edition

  Hi, I tried to upgrade the original 320 GB HDD to a 256 GB SSD.

  After that replacement of the naked NTFS hard drive to SSD format, I tried to do a "factory restore" using the DVD, I created some time ago about recovery. The DVD started and recovery program ran very well, first menus for recovery/system control etc. The problem is that the program would not be allowed a resumption of the plant as the HDD was little different/more than the installed hard drive to factory.

  This is the point I'm stuck at, I reassembled the original hard drive while I find a solution.

  Is it possible to find a workaround to avoid having to order a new disc of Windows 7? Any help and advice in terms of simple-ish would be greatly appreciated. Thank you.

  Bagpuss

  Hello:

  If you can still read all 25 characters of the product key of W7 on the bottom of your laptop, you can make your own plain W7 x 64 Home Premium installation media and use the product key to activate the installation.

  Download the applicable version of the W7 from the link below.  Use the SP1 media files regenerate.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languages-x86-amp-x64/page59?p=470600&viewfull=1#post470600

  Then use this tool to transfer the ISO file downloaded on a key USB 4 GB or DVD.  The tool will make the DVD or drive bootable flash as well.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

• Smart Pavilion Touch 14-n056sa: Touro Hitachi 500 GB portable drive will not work on Win 10

  Before I updated to win 8 to 10 to win my Hitachi 500 GB portable hard drive did Touro worked to make a backup of. Now, it won't. It shows in the Device Manager and in the backup and support (windows 7) in the Panel, but in the latter there is a red x against it and "Save now" is grayed out. It won't work at all. Is there a way I can get to work rather than buy a new one?

  Hi Visruth - for a period of time you were kind enough to help me with my portable player that wouldn't work after that I downloaded Windows 10. I have no joy in time, but in the latest edition of number Computeractive 475 11 to May 24 to 70 page there are instructions that worked for me.

  1) click Start, type diskmgmt and press enter

  Sheet 2) in the portable player and take note of its name

  Law 3) click on the white space beside where the Portable Player is listed on the bottom of the screen

  4) click New Simple Volume to open the wizard

  (5) for the opening of the wizard, click on next again, and then click Next and choose a drive letter from the drop-down list, then click Next

  (6) select "Format this volume with the following settings.

  (7) select NTFS in the 'File system' drop ' then by default from the "Size of Allocation uniy" dropdown and select "perform a quick format.

  8) click on 'Next' and then 'Finish' to format the partion

  Once the player has completed must appear in the file Explorer.

  Hope this helps some other folk and thanks once more.

  Can you recommend ComputerActive - they publish no end of useful tips.

  Longfella

• Seagate expansion portable drive not seen on my linksys x 3500

  Plugged into a disk Seagate Expansion Portable 1 TB srd00f1 to my new Modem - Linksys router X 3500, but he can't seem to upward and when I looked at the on the network, it was confirmed that there is no drive present someone at - he had thoughts

  I recommend that you contact the Mfr of that drive for a good use and configuration of the drive is implemented well. Check if the external power supply is required.

  Consult the training set up manual and configuration on routers web page. Formatting NTFS is recommended on the disks.

  http://support.Linksys.com/en-MEA/support/gateways/X3500

  I recommend phone by contacting your regional Linksys supportoffice to see if the disc is officially supported on the x 3500 and ask questions on installation and configuration.

• Like if there is no external drive WD Passport to the F: drive

  I saved the files on the WD Passport external drive.  When excessing throught explores, the player goes to F: and after restarting G: changes I want to sent this external hard drive as a specific drive (f).

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try changing the drive letter and check if it helps.

  Change, add, or remove a drive letter:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Method 2:

  Check errors on the hard drive and check if that helps.

  Check a drive for errors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-a-drive-for-errors

  Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Hope the information is useful.

• Problem external automatic backup of passport WD - my hard drive installation

  Just bought a WD (Western Digital) my passport automatic backup drive. WD SES device peripheral USB error message is not installed.

  Running windows 7 and cannot install or download?

  Hey there, @rebellcatann!

  I'm sorry to hear about your problems with your new WD My Passport. :( I recommend to go to our website and download the driver WD SES as well as to check if you have the latest firmware update. Here is a link to all the downloads available for your model: http://products.wdc.com/support/kb.ashx?id=6N78CK

  I would also recommend to use this tutorial with instructions how to install it: http://products.wdc.com/support/kb.ashx?id=gdJVsn

  It will be useful. Good luck!
  SuperSoph_WD

• Error code 28: could not find the drivers. Windows 7 64 bit could not find the drivers for my Seagate Expansion Portable Drive. The same system works for another 32-bit version of windows 7.

  Hi, I would be grateful for help on this, I bought a new seagate expansion external hard drive not too long ago (abt 3 months old) and tried to use the device only recently (to back up my files). Windows has detected the drive but says that it could not find the drivers. (code 28)

  When I tried the drive on a 32-bit computer, it showed up working find and dandy. When it is plugged in the computer of the alien-ware, same error.
  Tried the uninstall from Device Manager and restart the computer, still the same error.
  Services.msc open and found windows install offshore. He turned on automatic, but the same error came out. Plug and play Windows was already working.
  Checked Windows SP1 worked, still the same error.
  He got me completely baffled.
  Before this, I had other problems with USB and disabled driver signature Verifier (I think that's what it was called) before you boot into windows. Worked very well for my flash drives each time that I did.
  I also had another external HARD drive which was held only 160G and it worked, so I'm not sure what the problem is with this particular external hard drive.
  Please help, I'm going crazy on this problem...

  The specifications of my devices are as follows:

  Computer

  Model:

  Alienware M14x

  Type of system:

  64-bit operating system

  Hard drive model:

  Portable Seagate Expansion 1 TB drive

  Hello

  28 error code means that the device was not fully installed.

  Method 1: Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  To open the Troubleshoot utility equipment follow the given link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: You can update the drivers and check out them.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Additional information.

  Install a USB device:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Hope this information helps.

• 132195ca spectrum, HP: hp spectrum 132195ca battery update

  Need to upgrade the battery, is it possible? Have a factory 4cell.

  Hi @Righteousone ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your spectrum XT Ultrabook 13-2195 ca HP and who need to know the replacement of the battery. Here is a link to your manual page 17. This unit supports only a 4-cell, Li-ion the part number 685989-001 3.05AH 4.5WHr.

  Hope that answers your concerns.

  Thank you.

• Portable drive device goes wrong

  Alerts this disk device goes wrong on my laptop of HP 2000 and said that I have to back up my files or I won't lose them. Indicates the name of the drive is Hitachi HTS543232A7A384 SATA peripheral Disk Volume: C:. D:\  I contacted HP support and they said, it must be replaced.  I don't know much about computers, so I have a lot of questions.  Is this drive the 'hard' for my PC?  About how much how much it costs to get it repaired? It would be cheaper to get a new PC? (paid $300 for this PC) What would make the disc go bad after only a year and a half? It was the result of a virus? It hurt more than if I continue to use my PC t that I tried to use my Norton 360 to backup my files, but I don't know what I'm doing. Norton Save things like photos and emails or it records only the things that make the PC work?

  Very good questions. Yes, it is commonly called the 'hard drive '. An exact replacement for your player is $ 43 on amazon.com:

  http://www.Amazon.com/Travelstar-Z5K320-HTS543232A7A384-internal-drive/DP/B00555EG7S

  For a few dollars more, you can get a larger capacity drive which is faster and improve performance. Let us know if you are interested by this.

  This shows how to replace the drive.

  http://www.YouTube.com/watch?v=Yxs3DgRExaU

  Norton 360 tutorial:

  http://www.YouTube.com/watch?v=QHVDg1dgksY

  You choose what you want to backup. You did a restore DVD when the laptop is new? If this isn't the case, maybe you can always use HP Recovery in the program menu. This will be the easiest way for you to get the software on the new drive.

  Hard drives are very delicate and mysterious and can go bad for no apparent reason, but it is an urban legend that a virus can make a record hard to spoil. That's why we need to save, save, save. Never trust of important data on a single hard drive.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• laptop Pavilion dv6 1030 ca: a HHD portable drive can be change for a SATA SSD drive

  Yes, I would like to change the HHD of: the Pavilion SSD sata drive, is this possible

  If the platform supports the SSD... You can have a check with service guys quick spec.

• Portable drive Windows 7 computer repair software

  Need help to find the right place to download and burn a CD (or USB) to attempt to repair the hard disk.

  I have a HP Notebook 2000-410US Windows 7 64 bit.  Diagnostic test does not have the short DST.  I know that it means that I have to replace the hard drive.  I have a few files out there that are not supported to the top and perhaps others that I missed in the manual backup operations.  I was stupid, now I know.

  I would like to be able to use a boot disk in the CD or USB port that has a chance to temporarily repair the hard drive so that I can try to restore these files before I replace HD or similar drasticness.

  Past the warranty.

  Series: {information}

  Product: A6Z99UA #ABA

  Hello:

  You can do an installation disc W7 simply by reading the info on the link below.  You only have to worry about the info about express reference on the boot media.  The product key and the rest is necessary if you plan to use the disk you did to reinstall W7 instead to purchase recovery discs.

  When you start from the disc, there will be a repair option on the lower left corner of the screen.

  Link to downloads ISO of W7 is below. Download the Windows 7 version that is on your product (Home Premium, professional or ultimate) key to apply.  SP1 Refresh of media files are the latest ISO files.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languag...

  Use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a DVD or a 4 GB flash drive using the USB compilation method.

  Use the product key of windows 7 of 25 characters to activate your installation.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Then go to the support of the PC and driver page to install the drivers you need.

• X 360 spectrum: spectrum x 360 keyboard died in portable mode, on Tablet mode

  new spectrum X 360, keyboard turns off when the form is opened in laptop mode and the keyboard when the screen is folded into tablet mode.

  This happens even if the bios (f10) or diagnostics (f2).

  Is there a way to reset the status of the keyboard depending on the angle of the screen or the orientation of the computer?

  @FelixCity,

  Hello and thanks for the display on the HP support forums.  If you encounter a problem connecting with the keyboard with your spectrum, it will be a hardware problem.  This happens because the corrector does not have a good enough connection.

  You will need to contact the HP support by phone for repair options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know how things are going.

  Thanks again for posting and have a great day.