Speed EA4200 wireless problems

Similar Questions

• Studio XPS 1645 wireless problem

  Hello!

  My problem is already a bit inconvenient. I tried all possible ways to solve it, maybe you can help me.

  I have a Dell laptop Studio XPS 1645, which contains Dell 1397 wlan mini card, manufactured by Broadcom. It has a few problems with the network connection. It doesn't connect at all, or it is, but very slow. I mean, I have internet 30mbps here, that I can use with the cable, but with the radio, it can reach only 20mbps. I tried many other networks, all of the same problems. I have Windows 7 64 bit os.

  I tried all the drivers, hopefully, you can find me one that fits.

  Thank you

  gretzky999,

  Which may vary with antenna how son your system and you home network.

  I used the Intel 5100 and had good results. The Intel 5300 should also have good results. Both work on 2.4 GHz and 5.0 GHz

  If you don't like the cards, the mini map low-profile WLAN Dell Wireless 1520 (11agn) works on 2.4 GHz and 5.0 GHz.

  The Dell Wireless 1501 Wireless-N WLAN Half-Mini card works on 2.4 GHz ONLY, but uses the double flow, giving the speed N Wireless.

  Some cards use a 2-wire and some use 3-wire. It also depends on your operating system due to the location of the drivers and adapters are have no drivers for some operating systems.

  Rick

• WAG320N wireless problems

  I am having major problems with my Linksys WAG320N. Hoping someone here can help as I am quite clueless when it comes to networking.

  Without changing the settings, the other day that my Macbook Pro could not connect and he kept saying 'timeout '. From that point my iPhone also refused to sign, although access to the internet on my MBP viaethernet was fine.

  I did a hard reset according to the instructions of this forum, and then re-configured with the installation CD. The router wireless light was turned on but my MBP did not see the network. Finally, I managed to connect after I restarted my laptop and enjoyed every 10 minutes without internet connectivity before wireless problem network come fall and now does not appear in my list of networks once again, even if the wireless light is still on.

  Ethernet connection still works, but not via the wireless.

  I restarted my laptop and the router and tried switching channels on the router, all to nothing done. Very confused and frustrated!

  Someone at - it suggestions? Thanks in advance for any help.

  What is the wireless settings you have set up on your router (SSID, channel and security mode)?

  Connect to your router configuration page and click on the Wireless tab and click on the "Advance Wireless Settings" sub-tab and under change 75 beacon interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

  Now let's see if you can locate your wireless network and try to connect...

• T40 2374-PU3 wireless problems

  T40 2374-PU3 Wireless problems - I tried every driver and followed instructions to install several times.  I was able to install it successfully in the past (about a year), but do not remember with the version of the driver that I used.  Using WinXP SP2 - just installed.

  Help, please!

  Thank you!

  Welcome to the forum!

  Here is your wireless driver:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-42683

  After uploading, be sure to check out according to the instructions on the download page.

  I hope this helps.

• S10 - 3T wireless problem

  My rig to receive yesterday and fought wireless problems.  Thought, he was my network for some time and found if I close the 3 t of the network works fine.

  The 3 t at this point works well on the network but sometimes slow.  However any TIME that I try to download a file, it works as usual for a while then just dies.

  Stop downloading and it is surfing.  It seems also to kill or slow down the network to a crawl at the same time.

  I tried to update the drivers in Device Manager and it says they are the best already.

  Any thoughts?

  Thank you for your understanding.

  The ends of the ongoing saga I think.

  I went to Burger King this morning and connected to their hot spot and the thing that worked great - downloaded a large file on site.

  Lenovo, I called and they told me to uninstall the software Lenovo 5 ready.  I did and rebooted and it worked fine and still seems to work very well ;-)  They said that it causes conflicts.

  Worked on my unit anyway.  This happens on a platform of Asus here one year, their uninstalled software and it worked fine.

• T400 problem with slow speed internet wireless. Help, please

  Hello

  Just got my new T400 (276581U) and I am very happy with it. However, he has a problem. I searched extensively in this area and other forums, but have not found the solution. So any input or help would be greatly appreciated.

  Problem:
  upload and download speed is very slow when connected to wireless broadband. Measures download speed 1 Mbit/s on www.speedtest.net, while two other computers (XP and Vista) reach speeds 6 Mbit/s on the same network wireless download.

  I tested the computer via LAN and here it downloads at normal speed of 6 Mbps.

  OS: Windows 7
  Network cards:
  Intel 82567LF Gigabit network connection (driver version: 10.1.6.0)
  Intel Wifi Link 5100 AGN (driver version: 13.0.0.107)

  I have download all the latest drivers on the Lenovo support site. The pilot Gigabit Network Connection, I downloaded however Intel, as there is no driver windows 7 on Lenovo website. The Intel driver has improved my connection to the local network (before that I could not download the full site content) and it has not changed my connection Wireless for the better or worse.

  Wireless configuration:
  Wireless g connected to the modem access point high speed
  So, to access internet, I need to connect twice, first the access point, and then click the modem to broadband. This configuration works on two other computers in the House. The lenovo is however not seem to recognize that I am online, even when I am. The symbol "not connected" is always displayed in the toolbar, and diagnostic tests tell me that I'm not online. That might relate to the problem.

  Thanks for reading this. I hope that some kind soul can help.

  pass under the power manager find advanced settings and then look for the Manager of the electric network... its value usually on the default energy savings

• HP HDX 16 wireless problem solved

  In the case where this is of interest to someone, I bought a HDX 16-1370 notebook pc a week ago and had problems connecting to my wireless home network. The link was tenuous at best, and even if I am stayed connected for a while, upload/download speed was about 1/10th of what I expected. Even after doing a system recovery (get help from HP support), following suggestions from this forum, and upgrade the driver for the card wireless (Intel 5100), problems persist. Finally, I replaced my LinkSys 801.11 b with a router LinkSys WRT54GL router and my problems have disappeared. I'm a happy camper now.

  Thanks for the informative post!

• E1200 low speed wired & wireless through L2TP

  I have the L2TP connection. Without the router, just cable, I have 35 MB/s download and 70 Mbit/s upload.

  Through the E1200 wired & wireless, I get a huge download speed 5-14 Mbps.

  I have the latest firmware and I reset it after the update.

  I read a lot of information about it and a lot of people write that this router just can't handle the gear through L2TP.

  Is this true? It could be fixed?

  If you get only 5-14Mbps download speed via the router, which is so far beyond the rate without it, I must say that the router has problems. You can try to lower the MTU settings to 1460, and then do the test using speedtest.net.If that does not solve the problem, I suggest getting a new router, preferably a one gigabit.

• WRT160N ver.3 :(wireless problem

  Hello world.

  IM new to this forum and linksys, Ive had programs with my new router (wrt160n) it came with a USB by linksys also.

  My problem is that half that none of my three computers or the games unit will connect wirelessy random strange one of them are soon as u put connection under load IE browse web, speedtests (using different sites) on speed tests it ping ok then run tesat download to 0.33megabits then gos slow down to the point u got is no longer usable connection , the router is down on web interface also.this is tested on all connections to all the same pc both with own usb or wireless provided.but soon I use cable (cat5e) on each pc, I get connection speed test full speed, games, email, web site surfing.i phone shop I received the package of they telling me without any question , requesting that the defective unit .

  can someone point me in the right direction 3-5 days without a router be pain in the ass.

  Thank you very much for taking the time to read.

  gman20004

  To reset your router you have to press on and hold the reset button on the back of the router for 30 seconds... Release the reset button... Unplug the router power cable, wait 30 seconds and reconnect the cable power., now, you must make some changes on your router if you configure your router settings...

  On your router configuration page, change the size of AUTOMATIC MTU to manual and change the size of 1500 to 1350 and click on save settings...

  Now click on the tab 'Wireless' and below to change the settings as I mentioned in my previous post. Now, you can try to connect to your wireless network.

• x 201 N wireless problem

  ThinkPad x 201-3294cto

  adapter wireless - realtek 802.11b/g/n wireless adapter II

  Laptop only runs at the speed of 54 Mbps when connected N 300mbps wireless access point.  Is there a problem with the Realtek cards?  Is there something I should do to work at 300 Mbps speed?

  OK - problem solved.  Discovered to run N Wireless 300mbps that I had to set the security on my Access Point

  WPA2-Personal-AES.  I think that this will be the future standard.  Thanks for the inputs.

• slow down the speed of wireless download

  I currently have a download speed of less than a half a meg. It belonged to 15mgs. I have a laptop Dell Wireless. I checked for the virus/worms/etc, no.
  My OS is win7. The issue is new, and I can't locate the problem. It works as well, because I bought the PC in December 2010.

  I ran a diagnostic report and it indicates a problem with the connection to my (DNS) domain network framework... I have Comcast in Jacksonville, Florida. I don't know how to set the DNS from my PC.

  What I don't understand is, that my download speed is less than a meg, my download speed is 4mgs +...

  Can someone please help? If you can help, please explain how, as if speaking to a complete novice.

  Thank you

  Raven

  Hello

   

  Make sure that the adapter is configured to obtain DNS automatically in its properties.
  Unplug the modem and router (if separate) at least 30 seconds, and then reconnect the devices back in and run ipconfig enough and then ipconfig / renew from a high command prompt to refresh the network connection.
  After that, test if the network speed, improve and so always get the DNS error, run ipconfig and paste back what he says.

• Low speed on Wireless N

  I'm trying to implement a DV6 on Wireless N. I have a Linksys WRT160N router and get speeds up to 120mbps on a desktop wireless located near 100 feet from the router. I can not get over 54 Mbps on the laptop, even within 10 feet. I checked the properties of the device and verified that the width of the channel is set to AUTO and 802.11n Mode is ENABLED. I noticed the rest of my system below specs. Any help would be appreciated.

  LAPTOP MODEL: HP DV6

  Operating systems: Windows 7 (64-bit)

  RAM: 4 GB

  WiFi ADAPTER: Intel WiFi Link 1000 BGN

  PILOT: 13.0.0.107

  ROUTER: Linksys WRT160N

  FIRMWARE: 3.0.02

  After much research, I believe I have solved the problems with the Wireless N of low speeds, especially with Intel WiFi Link 1000 BGN configurations. Here's what I could learn from Intel support forums.

  "The IEEE * 802.11n draft prohibits using high throughput with WEP or TKIP as the unicast encryption algorithm." If you use these methods of encryption (WEP, WPA-TKIP), your rate will be reduced to 54 Mbit / s. Intel® WiMAX/WiFi Link 5350, Intel® WiMAX/WiFi Link 5150, Intel® WiFi Link 5300, Intel® WiFi Link 5100, Intel® WiFi Link 1000, and Intel® Wireless WiFi Link 4965AGN client drivers connect using a legacy IEEE 802.11 g connection rather than failing to connect altogether which complies with the IEEE 802.11n draft standard. "This means that you must use a connection Wi - Fi Protected Access * (WPA2-AES or WPA2-TKIP).

  I have reset the wireless security on my router to use WPA2-AES, reconfigured my laptop for the same security settings and options was immediately connected to more than 200 Mbit/s.

• Connectivity with printer Epson wireless problems.

  Epson printer indicates that the wi - fi connection is excellent. The connection to devices also indicates that the signal strength is excellent. However, when I go to print it tells me that there is no wireless printer! This happens with the iMac, iPad and iPhone. This just started happening about 2 weeks ago.

  See if it works... In system preferences > printers and Scanners choose your printer and remove it from the list, and then add it back

  Get help to solve the problems of printer on your Mac - Apple Support

  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?useCookie=Yes & infoType = FAQ & oid = 209708 & prodoid = 63095161 & foid = 230405

• Cause first of the wireless problem?

  I've had my laptop repaired a week ago, as the wireless card was more is detected. I bought a dv6258se in Feb ' 07, he was really running hot, the GPU ran above 80 ° C, 55 ° C CPU all idling. I installed F.3D as soon as it was released in Nov ' 07 and there really the time down, and a year later, the wireless gave out. The motherboard was originally a 30B 7 Quanta, and it's still a 30B 7 Quanta, flashed with the version of BIOS F.40 even if my the driver model page shows later as F.3D.

  So, what's the problem? I can probably keep it on the downlow time if it was caused by excessive heat. If I got was a band-aid to keep me more of the extended warranty, while HP does not solve the problem for free once again, then they did a very good job of it. I have not enough income available Clipboard $ 1100.

  F3D is the last Messenger for your model:

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093 & LC = on & DLC = in & CC = US & lang = to & Product = 3340175

  F.40 is posted on other models, but can't say that I recommend:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-64061-1 & LC = on & DLC = in & CC = US & lang = to & os = 2093 & Product = 3546969

• Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

  Hi all

  I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

  I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
  Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
  No mouse, no keyboard, and no USB key.

  When I start my Portege I must enter a password after you press the power button.
  These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

  If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

  I ran Windows 7 Enterprise on the Portege.
  BIOS version is 3.30

  Do you have a solution for me?

  Hello

  The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
  You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

  Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

  By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

  Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has