Split tunnel setup on asa 8.4 with 6.4 AMPS
We have established and work, with the exception of tunneling split anyconnect.
the 6.4 AMPS I went to: remote VPN access > (Client) network access > Group Policy > GroupPolicy_anyconnect_vpn > edit > advanced > split tunneling > then unchecked "inherit" on list of network and selected an ACL called "TUNNEL of SPLIT.
the ACL is pasted below the CLI, it is all of our internal networks, everything is static routed and on the same vlan
SG-ASA-1 # sho - TUNNEL of SPLITTING access list
list of access TUNNEL of SPLITTING; 10 items; hash name: 0x25b1daf1
Access-list 1 permit line SPLIT TUNNEL extended ip 192.168.100.0 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0xe3a9484b
permit for SPLIT-TUNNEL list lengthened 2 ip 192.168.105.0 access line 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0x377afd96
allowed for access list 3 SPLIT-TUNNEL line scope ip 192.168.110.0 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0x0b4d6f9c
line 4 extended to the TUNNEL of SPLIT-ip access list 192.168.120.0 allow 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0x7a6cc93f
allowed for access list 5 SPLIT-TUNNEL line scope ip 192.168.130.0 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0xe228bdad
allowed for access list 6 SPLIT-TUNNEL line scope ip 192.168.140.0 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0x317f80c8
allowed for access list 7 SPLIT-TUNNEL line scope ip 192.168.150.0 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0xe4c276b0
allowed for access list 8 SPLIT-TUNNEL line scope ip 192.168.160.0 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0x0c2dd3ab
allowed for access list 9 SPLIT-TUNNEL line scope ip 192.168.170.0 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0x00a4d4e3
permit for line TUNNEL of SPLITTING access-list 10 scope ip 192.168.180.0 255.255.255.0 192.168.22.96 255.255.255.224 (hitcnt = 0) 0xfb381008
SG-ASA-1 #.
After this setting in the Group of ASSISTANT Deputy Ministers policy, we tested in vain yesterday morning. They can connect and ping all those inside network but not the internet. The journal of the asa showed what follows when a vpn client tried to ping Yao
6 August 14, 2012 07:51:04 64.60.xxx.xxx 4397 206.169.203.226 1433 routing cannot locate the next hop for TCP to inside:64.60.xxx.xxx/4397 to outside:206.169.203.226/1433
We can ping the inside no network problems after you connect to the VPN from outside.
64.60.xxx.xxx is our public IP address that is on the external interface, which is the IP address we use to vpn.ourdomain.com
Thanks in advance for any help
Hello
You can try to use the standard access list in the same menu.
List of strategies for the tunnel CLCK spit > click on manage, select the standard acl tab and only add 192.168.0.0 255.255.0.0 (for testing purposes)
Then test if it works to connect to Internet
The filtering you want, highest in your message you can do it with a security acl.
If it works, you can add more specific standard ACL split tunneling list, as
Add 192.168.100.0
etcetc
Tags: Cisco Security
Similar Questions
-
Tunnel of Split VPN Setup ASA to force inside the tunnel for single address
Hi all
We have an ASA with IPSec VPN facility to addresses Internet of Tunnel from Split. We have an Internet address that must come from the external interface of the ASA. I have added this address to the list of split tunnel and confirmed on the client that is the road to the tunnel, but I'm not able to get to this address via the VPN.
How the ASA to allow this unique Internet address to come via the VPN and route back on the same interface to the Internet and the return traffic to back up in the client VPN tunnel.
I need to get to the address is 213.92.42.118. Here's the config relavent (let me know if I left anything):
interface GigabitEthernet0/0
nameif outside
IP 1.1.1.1 255.255.255.0
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
name 10.80.177.0 VPN_Pool
Outbound_Ports tcp service object-group
port-object eq www
access-list extended sheep allowed any ip VPN_Pool 255.255.255.0
access-list extended users allow icmp a whole
access-list extended users enable a tcp
access-list extended users allow udp a whole
users_splitTunnelAcl list standard access allowed 10.0.0.0 255.0.0.0
standard access list users_splitTunnelAcl allow 192.168.43.0 255.255.255.0
users_splitTunnelAcl list standard access allowed 192.168.40.0 255.255.255.0
users_splitTunnelAcl list standard access allowed host 213.92.42.118FWOB list extended access permit tcp any any Outbound_Ports object-group
Global (LUXCVGASA01e) 2 1.1.1.1
NAT (LUXCVGASA01i) 2 10.0.0.0 255.0.0.0
NAT 0 access-list sheep (LUXCVGASA01i)Any help is appreciated.
-Jeff
Hi Jeff,
Just had a chance to look through the Setup and I guess that configured nat is incorrect.
access-list extended sheep allowed any ip VPN_Pool 255.255.255.0
NAT 0 access-list sheep (LUXCVGASA01i)
NAT (LUXCVGASA01i) 2 10.0.0.0 255.0.0.0Global (LUXCVGASA01e) 2 1.1.1.1
The access-list says sheep that ALL traffic goes to the pool of the VPN to go UN-natted. So, when you try to access the public ip address via the tunnel VPN, the traffic the ASA, ASA then performs a search destination NAT and matches the nat command "nat (LUXCVGASA01i) 0 access-list sheep." If the ASA detects a destination NAT translation, it will bypass route search and uses the destination NAT translation to determine the output interface (in this scenario, the output interface is LUXCVGASA01i.
So, to resolve this problem, change the acl sheep from "any to VPN_Pool 255.255.255.0" inside"to the network VPN_Pool 255.255.255.0.
clear xlate and re-initialization of the tunnel, and this should solve the problem.
Let me know if that answers your query.
Kind regards
Manisha masseur
-
Split tunnel with ASA 5510 and PIX506.
Hello
I have the production between Asa 5510 (main office) and Pix 506 VPN tunnel. It is configured so that all traffic is encrypted and moves through the tunnel. This includes remote users behind Pix Internet traffic. I would like to use split tunnel and direct Internet traffic hitting the web directly from Pix instead of going through the tunnel. How can I do this safely? Please see current config Pix below:
:
6.3 (5) PIX version
interface ethernet0 car
interface ethernet1 10baset
ethernet0 nameif outside security0
nameif ethernet1 inside the security100clock timezone EDT - 5
clock to summer time EDT recurring 2 Sun Mar 2:00 1 Sun Nov 02:00
No fixup protocol dns
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
No fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
no correction protocol tftp 69
names of
allow VPN 192.x.x.x 255.255.255.0 ip access list one
LocalNet ip access list allow a whole
pager lines 20
opening of session
monitor debug logging
logging warnings put in buffered memory
logging trap warnings
Outside 1500 MTU
Within 1500 MTU
IP address outside 24.x.x.x 255.255.255.0
IP address inside192.x.x.x 255.255.255.0
IP audit name Outside_Attack attack action alarm down reset
IP audit name Outside_Recon info action alarm down reset
interface IP outside the Outside_Recon check
interface IP outside the Outside_Attack check
alarm action IP verification of information
reset the IP audit attack alarm drop action
disable signing verification IP 2000
disable signing verification IP 2001
disable signing verification IP 2004
disable signing verification IP 2005
disable signing verification IP 2150
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list LocalNet
Route outside 0.0.0.0 0.0.0.0 24.x.x.x
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-3des esp-md5-hmac AMC
map UrgentCare 10 ipsec-isakmp crypto
card crypto UrgentCare 10 corresponds to the VPN address
card crypto UrgentCare 10 set counterpart x.x.x.x
card crypto UrgentCare 10 value transform-set AMC
UrgentCare interface card crypto outside
ISAKMP allows outside
ISAKMP key * address x.x.x.x 255.255.255.255 netmask
ISAKMP identity address
part of pre authentication ISAKMP policy 20
ISAKMP policy 20 3des encryption
ISAKMP policy 20 md5 hash
20 2 ISAKMP policy group
ISAKMP duration strategy of life 20 86400
SSH timeout 15
Console timeout 0
Terminal width 80
Cryptochecksum:9701c306b05151471c437f29695ffdbd
: endI would do something by changing the acl that applies to your crypto card. You want to know what you want to support above the tunnel and then deny other networks.
If you have:
192.168.3.0/24
192.168.4.0/24
10.10.10.0/24
172.16.0.0/16
Do something like:
VPN access list allow 192.x.x.x ip 255.255.255.0 192.168.3.0 255.255.255.0
VPN access list allow 192.x.x.x ip 255.255.255.0 192.168.4.0 255.255.255.0
VPN access list allow 192.x.x.x ip 255.255.255.0 10.10.10.0 255.255.255.0
VPN access list allow 192.x.x.x 255.255.255.0 ip 172.16.0.0 255.255.0.0
Then when the traffic is destined for something other than these networks, it will go not to the ISP instead of the tunnel.
HTH,
John
-
ASA 5505 Split Tunneling configured but still all traffic Tunneling
Hello
I installed an ASA 5505 running 8.3.2 and Cisco AnyConnect Client 2.5.2017.
There are the DefaultRAGroup and a newly configured Group called SplitTunnelNets.
I have 1 internal subnet (192.168.223.0/24) which has a matching ACL/AS configured on the DefaultRAGroup and the custom group policy called SSLClientPolicy.
When I start the VPN with the ASA, I can indeed reach internal resources, but when I look at the routing table, I see a new default gateway route 0.0.0.0 / 0-> 192.168.25.2 (that is in the IP pool) with a metric of 2. The default route before the start of the session AnyConnect now has a higher metric, so the 192.168.25.2 next hop is a priority.
I don't see the routes in the routing table for 192.168.223.0/24 as I expect to see. In the diagnosis of AnyConnect, I see that 0.0.0.0/0 is the policy applied to the client.
Here's my setup. Please tell me if you see something that I'm missing.
ASA 8.3 Version (2)
!
host name asanames of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.223.254 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP x.x.x.x 255.255.255.240
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
boot system Disk0: / asa832 - k8.bin
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS lookup field inside
DNS server-group DefaultDNS
Server name 192.168.223.41
domain Labs.com
network obj_any object
subnet 0.0.0.0 0.0.0.0
vpn-client-net network object
255.255.255.0 subnet 192.168.25.0
network of the internal net object
192.168.223.0 subnet 255.255.255.0
the DM_INLINE_NETWORK_1 object-group network
internal-net network object
network-vpn-client-net object
the DM_INLINE_NETWORK_2 object-group network
internal-net network object
network-vpn-client-net object
SplitTunnelNets to access extensive ip list allow any 192.168.223.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
mask 192.168.25.1 - 192.168.25.50 255.255.255.0 IP local pool SSLClientPool
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ASDM image disk0: / asdm - 635.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, all) static source internal-net net internal static destination vpn client vpn client-Net
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Labs-AAA protocol ldap LDAP-server
AAA-server Lab-LDAP (inside) host 192.168.223.41
Server-port 636
LDAP-base-dn dc = labs, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn [email protected] / * /
enable LDAP over ssl
microsoft server type
Enable http server
http 192.168.223.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto ca trustpoint ASDM_TrustPoint0
registration autosslvpnkeypair key pair
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint1
ASDM_TrustPoint1 key pair
Configure CRL
string encryption ca ASDM_TrustPoint0 certificatesTelnet 192.168.223.0 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.223.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
NTP 192.5.41.41 Server
NTP 192.5.41.40 Server
SSL-trust outside ASDM_TrustPoint1 point
WebVPN
allow outside
No anyconnect essentials
SVC disk0:/anyconnect-win-2.5.2017-k9.pkg 1 image
SVC disk0:/anyconnect-macosx-i386-3.0.0629-k9.pkg 2 image
Picture disk0:/anyconnect-linux-3.0.0629-k9.pkg 3 SVC
enable SVC
tunnel-group-list activate
internal SSLClientPolicy group strategy
attributes of Group Policy SSLClientPolicy
value of server DNS 192.168.223.41
VPN-tunnel-Protocol svc
Split-tunnel-policy tunnelspecifiedvalue of Split-tunnel-network-list SplitTunnelNets
field default value Labs
split dns value Labs.com
the address value SSLClientPool pools
WebVPN
SVC Dungeon-Installer installed
attributes of Group Policy DfltGrpPolicy
value of server DNS 192.168.223.41
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list SplitTunnelNets
coyotelabs.com value by default-field
type of remote access service
type tunnel-group SSLClientProfile remote access
attributes global-tunnel-group SSLClientProfile
CoyoteLabs-LDAP authentication-server-group
Group Policy - by default-SSLClientPolicy
tunnel-group SSLClientProfile webvpn-attributes
allow group-alias CoyoteLabs
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:95b7ff58b54e02948a14b225eec1a990
: endThe split tunnel access list must be standard access-list, not extended access list.
You must change the following:
FROM: SplitTunnelNets access-list extended ip to allow all 192.168.223.0 255.255.255.0
To: SplitTunnelNets standard access list allows 192.168.223.0 255.255.255.0You should be able to reconnect again and will be able to access the Internet after you set up the standard access-list split tunnel.
Hope that helps.
-
Cisco ASA ruled out a specific ip address of the split tunneling
Hello
I need help with a question on the split Tunneling Configuration.
I have need exclude split tunneling networks already configured a specific ip address.
This is my setup:
Split_Tunnel list standard access allowed 192.168.0.0 255.255.0.0
Split_Tunnel list standard access allowed 10.0.0.0 255.0.0.0attributes of Group Policy GroupPolicy_Anyconnect_Access_Exception_1
WINS server no
Server DNS value xxxxx xxxxxxx
VPN - connections 3
VPN-idle-timeout 480
VPN-session-timeout no
client ssl-VPN-tunnel-Protocol
value of group-lock Anyconnect_access
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Split_Tunnel
field default value xxxxx
Split-dns value telefonica wh.telefonica cic.wh.telefonica telefonica.corp t380.inet
mailar.telefonica.Corp mailar.telefonica.com tefgad.com telefonicaglobalsolutions.com
telefonicabusinesssolutions.comI need to exclude the split tunnel, IP 10.0.0.50, my question is, if I change the list access deny this IP, the supplementary tunnel will exclude the period of INVESTIGATION.
example:
Split_Tunnel list standard access deny 10.0.0.50 255.255.255.255
Split_Tunnel list standard access allowed 192.168.0.0 255.255.0.0
Split_Tunnel list standard access allowed 10.0.0.0 255.0.0.0BR,
Fidel Gonzalez
Hi Fidel,
Yes, it should work; as in your example deny 10.0.0.50/32 sholud exclude the traffic in the tunnel.
I tried in my lab, and in my case, access-list is:
split_1 list standard access denied the host 10.2.2.250
split_1 list standard access allowed 10.2.2.0 255.255.255.0And it worked he excluded the 10.2.2.250 host.
The screen shot of the AnyConnect added:
Concerning
Véronique
-
Restrictions of ASA Anyconnect for Split Tunneling network list
Hello
I have a question. We use Cisco ASA 5520 9.1.1 firmware version with configure SSL VPN Anyconnect(Anyconnect client version 2.5.605).)
We use the big Split Tunneling access-list with 200 ACEs.
If I add more than 200 entries in the list of access and then I connect to the VPN, and after that, we will see that only 200 entries have been added to the routing table.
So my question is... There is a limit for Split Tunneling ACL when you use the Anyconnect client?
Thank you
Hello
This is very well document in one of internal bug at Cisco . Unfortunately, as it is internal I will not be able to share the same with you. The only workaround available as of now is to combine your networks and make the list as small as possible covering all the required network you need which is less than or equal to 200
Thank you
Jeet Kumar
-
Even after the "split-tunnel-policy tunnelspecified" specification with "split-tunnel-network-list value TUNNEL of SPLITTING" and denying all traffic to the public IP address of the ASA, I'm still not able to SSH in the firewall. Everything else seems to work OK, but I have to be able to handle the ASA from the public interface. In fact, I expect little given the mean one sa is the installer for the tunnel, and it would seem that a deny statement would be ignored, but perhaps there is a way around this. Thank you.
If you want to connect to your home IP through the tunnel, you must specify 'inside access management:
http://www.Cisco.com/en/us/docs/security/ASA/asa82/configuration/guide/a...
Best regards, Karsten
Sent by Cisco Support technique iPad App
-
Easy VPN between two ASA 9.5 - Split tunnel does not
Hi guys,.
We have set up a site to site vpn using easy configuration vpn between ver 9.5 race (1) two ASA. The tunnels are up and ping is reached between sites. I also configured split tunnel for internet traffic under the overall strategy of the ASA easy vpn server. But for some unknown reason all the customer same internet traffic is sent to the primary site. I have configured NAT to relieve on the side of server and client-side. Please advise if no limitation so that the installation program.
Thank you and best regards,
Arjun T P
I have the same question and open a support case.
It's a bug in the software 9.5.1. See the bug: CSCuw22886
-
What is is it possible to use the acl extended for split tunneling on ASA?
I'm setting up VPN IPSEC RA on SAA and I would like to know if it is possible to use the ACL extended as part of the split tunneling?
Thank you!
Yes, you can use the extended ACL. See this example:http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-nex...
Kind regards
Averroès.
-
VPN3005 - PIX506 using NEM &; IPP with split tunnel
After the design is given
VPN3005 (central) - tunnel - PIX506 (Remote) network-extension-mode & RRI
A VPN (PC) Client connects to VPN3005 and wants to reach the server at the site of PIX506 above the tunnel of 3005 to PIX506.
At the same time the users on LAN Pix506 want to use Internet directly - which means
split tunneling should be used.
On VPN3005 under IProuting - RRI - IPP network extension and
Customer IPP is enabled.
Connectivity between LAN (central) and LAN (remote) is known, but IPP for
VPN Client (PC) (wants to connect to the server on the Remote LAN) is not possible.
If split for ezvpn (PIX506) tunneling is used.
It works, if you all tunnel!
Question:
Is this cause is not possible, this feature (EZVPN + RRI + split-tunnel) is not implemented, or if this thing works well?
(Even behave with a real HW3002)
BTW. VPNConc3.6.7 (3.6.3,3.6.5,3.6.7A), HW3002 3.6.7, PIX 6.2.2 (6.3.136beta)
Images in brackets have also been tested with even behave.
Thank you for the help & information
This thing in advance.
Kind regards
Stefan
You have the pool of addresses VPN client in the tunnel of split for the PIX list? The troubled with making split tunneling is that traffic has behind the PIX for this network first, then only ITS special is based for this particular network subnet. If you try to connect via a client, or even to the LAN behind the 3005 (same thing in theory), then unless someone behind the PIX sent traffic to this subnet first, your traffic will not get there.
When the split tunneling is not used, the PIX automatically creates the SA for all networks, and that's why you can then test the hosts a VPN client (or to the LAN behind the 3005).
Take a simple test and launch a VPN client to the 3005 connection, making sure that the address pool is in the list of PIX split tunnel. If you try and ping from the client to the PIX network it will not work. Now have someone behind the PIX ping to the address of the VPN client, you will probably lose the first packages of one or two, but then it should respond OK. NOW try to VPN client and ping, PIX network, it should work now, because the PIX has built the tunnel to the address pool.
-
Hello
We have ASA 5520 acting as the VPN server and the router Cisco 1941 as EZVPN client. These last days of customer is not able to establish the vpn connection. 1941 continuous router generates the below the log messages
---------------
001569: Jul 22 ABC 12:19:05.883: CRYPTO-4-EZVPN_SA_LIMIT %: EZVPN (VPNGROUP) Split tunnel attributes (51) greater than max allowed split attributes (50)
001574: Jul 22 ABC 12:19:07.835: % CRYPTO-6-EZVPN_CONNECTION_DOWN: user (customer) = vpn_user group = VPNGROUP Client_public_addr =
Server_public_addr = 004943: Jul 22 ABC 11:32:42.247: % IP_VFR-4-FRAG_TABLE_OVERFLOW: Dialer1: the table fragment has reached its maximum 16
---------------
Future prospects for aid and the suggestion of experts
Thank you
Israr Ahmad
Yes, your split tunnel access-list is too big, and he has reached the maximum number of lines.
Try to reduce the number of ACL for your tunnel of split ACL maybe combining the subnets if possible.
-
Hi guys,.
I just sent a SRP527W that I had lying around for a while.
Everything about the unit works as well as can be expected, however I have an obligation to perform split tunneling for VPN users.
Currently, the only way that receives the VPN client is a default route. I noticed that on site-to-site VPN and tunnels GRE, you can specify safe routes, but I can't find anything that relates to remote VPN users. This can be done on IOS without problem, but would be good for the RPS.
I'm under the latest firmware 1.01.26, so if I have not forgotten anything it would be probably for a future version?
See you soon.
Bryce
Hi Bryce,.
Nothing is overlooked, it is not possible to set up split tunneling for the VPN of the RPS server.
Kind regards
Andy
-
Hello everyone
I have setup a VPN connection, which I can connect to. For all customers of connection, I want to give them an IP (from a subnet maybe) and let them use this IP address for all that they do.
Therefore, this:and not current:
My inside is 192.168.1.0
My VPN IP pool is 192.168.30.5 - 200
My server (DNS, files, Web site) is 192.168.1.222Here's my setup. I scored what I thought might have something to do with it:
ASA Version 9.2 (1)
!
ciscoasa hostname
activate 8Ry2YjIyt7RRXU24 encrypted password
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
2KFQnbNIdI.2KYOU encrypted passwd
names of
pool of IP local IP-pool 192.168.30.5 - 192.168.30.200 mask 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.253 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
boot system Disk0: / asa921 - k8.bin
passive FTP mode
permit same-security-traffic intra-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
network of the object Server-25
Home 192.168.1.222
Description of the test server
network of the object server-80
Home 192.168.1.222
Description of the test server
network of the object server-443
Home 192.168.1.222
Description of the test server
network of the object server-2525
Home 192.168.1.222
Description of the test server
network of the object server-993
Home 192.168.1.222
Description of the test server
network of the object server-6001
Home 192.168.1.222
Description of the test server
network of the object server-6002
Home 192.168.1.222
Description of the test server
network of the object server-6003
Home 192.168.1.222
Description of the test server
network of the object server-6004
Home 192.168.1.222
Description of the test server
network of the VPN HOST object
192.168.30.0 subnet 255.255.255.0
the object to the Interior-net network
host 192.168.1.0
the VPN server object network
Home 192.168.1.222
outside_access_in list extended access permit tcp any object Server-25 eq smtp
outside_access_in list extended access permit tcp any object server-2525 2525 eq
outside_access_in list extended access permit tcp any object server-80 eq www
outside_access_in list extended access permit tcp any object server-443 https eq
outside_access_in list extended access permit tcp any object server-993 993 eq
outside_access_in list extended access permit tcp any object server-6001 eq 6001
outside_access_in list extended access permit tcp any object server-6002 6002 eq
outside_access_in list extended access permit tcp any object server-6003 eq 6003
outside_access_in list extended access permit tcp any object server-6004 eq 6004
outside_access_in to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.30.0 255.255.255.0
permit access-list Split-Tunnel-ACL standard 192.168.30.0 255.255.255.0
no pager
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 721.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (indoor, outdoor) Interior-net Interior-NET static source static destination HOST-VPN-VPN-HOST
NAT VPN VPN-server destination (indoor, outdoor) static static source HOST-VPN-VPN-HOST
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
network of the object Server-25
NAT (inside, outside) interface static tcp smtp smtp service
network of the object server-80
NAT (inside, outside) interface static tcp www www service
network of the object server-443
NAT (inside, outside) interface static tcp https https service
network of the object server-2525
NAT (inside, outside) interface static 2525 2525 tcp service
network of the object server-993
NAT (inside, outside) interface static tcp 993 993 service
network of the object server-6001
NAT (inside, outside) interface static tcp 6001 6001 service
network of the object server-6002
NAT (inside, outside) interface static tcp 6002 6002 service
network of the object server-6003
NAT (inside, outside) interface static 6003 6003 tcp service
network of the object server-6004
NAT (inside, outside) interface static service tcp 6004 6004
Access-group outside_access_in in interface outside
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS AAA server HSS-auth-server protocol
allow only
AAA-server HSS-auth-server (inside) host 192.168.1.222
Timeout 5
key *.
identity of the user by default-domain LOCAL
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
trustpool crypto ca policy
Crypto isakmp nat-traversal 30
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0interface ID client DHCP-client to the outside
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
internal HSSvpn group strategy
attributes of Group Policy HSSvpn
value of server WINS 192.168.1.222
value of server DNS 192.168.1.222
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelall
Split-tunnel-network-list value Split-Tunnel-ACL
HSS.dk value by default-field
activate dns split-tunnel-all
type tunnel-group HSSvpn remote access
attributes global-tunnel-group HSSvpn
address IP-pool pool
HSS-auth-server authentication-server-group
Group Policy - by default-HSSvpn
password-management
IPSec-attributes tunnel-group HSSvpn
IKEv1 pre-shared-key *.
tunnel-group HSSvpn ppp-attributes
No chap authentication
no authentication ms-chap-v1
ms-chap-v2 authentication
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:c85ff8bf61669bef56b4dad704a4930a
: endHello
Change Split Tunnel VPN in full Tunnel VPN, you have really do much in your configuration.
Seems that have already changed you the 'tunnelspecified' 'tunnelall' in configurations of the 'group policy' . You can delete the setup but that defines the ACL of Split Tunnel
attributes of Group Policy HSSvpn
No split-tunnel-network-list value Split-Tunnel-ACLSeems that you use an internal AAA server to manage authentication rather than on the SAA. I guess if you want to assign a specific IP address for VPN user/username, then it must be done on the side Server?
If you had the "username" on the SAA configurations you can set it up under its framework which "username" IP address gets when he or she connects with the VPN Client.
As naturally as you start using the complete Tunnel and all traffic from the VPN Client starts to get in the tunnel to the ASA you will need a NAT for VPN Client users Internet traffic. You can configure this NAT like this for example:
network of the VPN-POOL object
192.168.30.0 subnet 255.255.255.0interface of VPN-POOL dynamic NAT (outside, outside) after auto source
Note that this is a manual of NAT / double NAT statement real "nat" IS NOT inserted under the 'object' , but the 'object' is rather created it can be used in the "nat" command. I see that your other dynamic PAT configurations are configured with NAT Auto / object NAT network. You can do this like that too if you wish. Personally I do like that.
But as I said before, it seems that you have already configured the VPN to be full of Tunnel. It is perhaps not as it is? While it is connected with VPN, you should be able to check the secure routes (or something like that) section to see if it says "0.0.0.0" If Yes, then it should be tunneling all traffic.
Hope this helps :)
-Jouni
-
Windows - Internet access, no split Tunnel L2TP VPN Clients does not
Greetings!
I have four ASA 5505 that I configured with 4 site to site VPN tunnels (works perfectly) to connect to our company facilities 4. The ASA is also configured with remote access L2TP/IPsec so that a specific group of users of portable computers can connect to and access to all facilities. It also works very well except for one important exception - my split tunnel setting doesn't seem to work, because I can't connect to the Internet outside the VPN resources.
I accept the inherent risk of allowing tunnels to split from a security point of view since I take the necessary steps to secure the systems used for remote access. I would appreciate any feedback on how to get the job of split tunnel.
Here is the configuration:
: Saved
:
ASA Version 1.0000 11
!
SGC hostname
domain somewhere.com
names of
COMMENTS COMMENTS LAN 192.168.2.0 name description
name 75.185.129.13 description of SGC - external INTERNAL ASA
name 172.22.0.0 description of SITE1-LAN Ohio management network
description of SITE2-LAN name 172.23.0.0 Lake Club Network
name 172.24.0.0 description of training3-LAN network Southwood
description of training3 - ASA 123.234.8.124 ASA Southwoods name
INTERNAL name 192.168.10.0 network Local INTERNAL description
description of name 192.168.11.0 INTERNAL - VPN VPN INTERNAL Clients
description of Apollo name 192.168.10.4 INTERNAL domain controller
description of DHD name 192.168.10.2 Access Point #1
description of GDO name 192.168.10.3 Access Point #2
description of Odyssey name 192.168.10.5 INTERNAL Test Server
CMS internal description INTERNAL ASA name 192.168.10.1
name 123.234.8.60 description of SITE1 - ASA ASA management Ohio
description of SITE2 - ASA 123.234.8.189 Lake Club ASA name
description of training3-VOICE name Southwood Voice Network 10.1.0.0
name 172.25.0.0 description of training3-WIFI wireless Southwood
!
interface Vlan1
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan2
nameif INSIDE
security-level 100
255.255.255.0 SGC-internal IP address
!
interface Vlan3
nameif COMMENTS
security-level 50
IP 192.168.2.1 255.255.255.0
!
interface Ethernet0/0
Time Warner Cable description
!
interface Ethernet0/1
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/2
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/3
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/4
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/5
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/6
Description for Wireless AP Trunk Port
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
interface Ethernet0/7
Description for Wireless AP Trunk Port
switchport access vlan 2
switchport trunk allowed vlan 2-3
switchport vlan trunk native 2
switchport mode trunk
!
boot system Disk0: / asa821-11 - k8.bin
Disk0: / config.txt boot configuration
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS domain-lookup outside
INTERNAL DNS domain-lookup
DNS domain-lookup GUEST
DNS server-group DefaultDNS
Name-Server 4.2.2.2
domain somewhere.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
DM_INLINE_TCP_1 tcp service object-group
EQ port 3389 object
port-object eq www
EQ object of the https port
EQ smtp port object
the DM_INLINE_NETWORK_1 object-group network
network-object SITE1-LAN 255.255.0.0
network-object SITE2-LAN 255.255.0.0
network-object training3-LAN 255.255.0.0
object-group training3-GLOBAL network
Southwood description Global Network
network-object training3-LAN 255.255.0.0
network-object training3-VOICE 255.255.0.0
network-object training3-WIFI 255.255.0.0
DM_INLINE_TCP_2 tcp service object-group
EQ port 5900 object
EQ object Port 5901
object-group network INTERNAL GLOBAL
Description Global INTERNAL Network
network-object INTERNAL 255.255.255.0
network-object INTERNALLY-VPN 255.255.255.0
access-list outside_access note Pings allow
outside_access list extended access permit icmp any CMS-external host
access-list outside_access note that VNC for Camille
outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_2
access-list outside_access note INTERNAL Services
outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_1
DefaultRAGroup_splitTunnelAcl list standard access allowed INTERNAL 255.255.255.0
access-list sheep extended ip INTERNAL 255.255.255.0 allow INTERNAL VPN 255.255.255.0
access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
access-list extended sheep allowed ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
access-list INTERNAL-to-SITE1 extended permit ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
access-list INTERNAL-to-training3 extended permitted ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
access-list INTERNAL-to-SITE2 extended permit ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
no pager
Enable logging
exploitation forest asdm warnings
Debugging trace record
Outside 1500 MTU
MTU 1500 INTERNAL
MTU 1500 COMMENTS
192.168.11.1 mask - local 192.168.11.25 pool IN-HOUSE VPN IP 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 623.bin
enable ASDM history
ARP timeout 14400
Global 1 interface (outside)
(INTERNAL) NAT 0 access-list sheep
NAT (INTERNAL) 1 0.0.0.0 0.0.0.0
NAT (GUEST) 1 0.0.0.0 0.0.0.0
5900 5900 Camille netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
3389 3389 Apollo netmask 255.255.255.255 interface static tcp (INDOOR, outdoor)
public static tcp (INDOOR, outdoor) interface www Apollo www netmask 255.255.255.255
public static tcp (INDOOR, outdoor) interface https Apollo https netmask 255.255.255.255
public static tcp (INDOOR, outdoor) interface smtp smtp Apollo netmask 255.255.255.255
5901 puppy 5901 netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
Access-group outside_access in interface outside
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS protocol AAA-server Apollo
Apollo (INTERNAL) AAA-server Apollo
Timeout 5
key *.
AAA authentication enable LOCAL console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
Enable http server
http 0.0.0.0 0.0.0.0 INTERNAL
http 0.0.0.0 0.0.0.0 COMMENTS
No snmp server location
No snmp Server contact
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
SYSTEM_DEFAULT_CRYPTO_MAP game 65535 dynamic-map crypto transform-set ESP-3DES-SHA TRANS_ESP_3DES_SHA
correspondence address 1 card crypto outside_map INTERNAL SITE1
card crypto outside_map 1 set of peer SITE1 - ASA
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
address for correspondence card crypto outside_map 2 INTERNAL training3
outside_map 2 peer training3 - ASA crypto card game
card crypto outside_map 2 game of transformation-ESP-3DES-SHA
address for correspondence outside_map 3 card crypto INTERNAL SITE2
game card crypto outside_map 3 peers SITE2 - ASA
card crypto outside_map 3 game of transformation-ESP-3DES-SHA
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
delimiter group @.
Telnet training3 - ASA 255.255.255.255 outside
Telnet SITE2 - ASA 255.255.255.255 outside
Telnet SITE1 - ASA 255.255.255.255 outside
Telnet 0.0.0.0 0.0.0.0 INTERNAL
Telnet 0.0.0.0 0.0.0.0 COMMENTS
Telnet timeout 60
SSH enable ibou
SSH training3 - ASA 255.255.255.255 outside
SSH SITE2 - ASA 255.255.255.255 outside
SSH SITE1 - ASA 255.255.255.255 outside
SSH 0.0.0.0 0.0.0.0 INTERNAL
SSH 0.0.0.0 0.0.0.0 COMMENTS
SSH timeout 60
Console timeout 0
access to the INTERNAL administration
Hello to tunnel L2TP 100
interface ID client DHCP-client to the outside
dhcpd dns 4.2.2.1 4.2.2.2
dhcpd ping_timeout 750
dhcpd outside auto_config
!
address INTERNAL 192.168.10.100 dhcpd - 192.168.10.200
dhcpd Apollo Odyssey interface INTERNAL dns
dhcpd somewhere.com domain INTERNAL interface
interface of dhcpd option 150 ip 10.1.1.40 INTERNAL
enable dhcpd INTERNAL
!
dhcpd address 192.168.2.100 - 192.168.2.200 COMMENTS
dhcpd dns 4.2.2.1 4.2.2.2 interface COMMENTS
enable dhcpd COMMENTS
!a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
NTP server 192.43.244.18 prefer external source
WebVPN
allow outside
CSD image disk0:/securedesktop-asa-3.4.2048.pkg
SVC disk0:/sslclient-win-1.1.4.179.pkg 1 image
SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 2 image
enable SVC
Group Policy DefaultRAGroup INTERNAL
attributes of Group Policy DefaultRAGroup
Server DNS 192.168.10.4 value
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.com
Group Policy DefaultWEBVPNGroup INTERNAL
attributes of Group Policy DefaultWEBVPNGroup
VPN-tunnel-Protocol webvpn
Group Policy DefaultL2LGroup INTERNAL
attributes of Group Policy DefaultL2LGroup
Protocol-tunnel-VPN IPSec l2tp ipsec
Group Policy DefaultACVPNGroup INTERNAL
attributes of Group Policy DefaultACVPNGroup
VPN-tunnel-Protocol svc
attributes of Group Policy DfltGrpPolicy
value of 192.168.10.4 DNS Server 4.2.2.2
VPN - 25 simultaneous connections
VPN-idle-timeout no
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.com
the value INTERNAL VPN address pools
chip-removal-disconnect disable card
WebVPN
SVC keepalive no
client of dpd-interval SVC no
dpd-interval SVC bridge no
value of customization DfltCustomization
attributes global-tunnel-group DefaultRAGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultRAGroup
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
Disable ISAKMP keepalive
tunnel-group DefaultRAGroup ppp-attributes
No chap authentication
no authentication ms-chap-v1
ms-chap-v2 authentication
attributes global-tunnel-group DefaultWEBVPNGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultWEBVPNGroup
tunnel-group 123.234.8.60 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.60
pre-shared-key *.
tunnel-group 123.234.8.124 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.124
pre-shared-key *.
tunnel-group 123.234.8.189 type ipsec-l2l
IPSec-attributes tunnel-group 123.234.8.189
pre-shared-key *.
type tunnel-group DefaultACVPNGroup remote access
attributes global-tunnel-group DefaultACVPNGroup
VPN INTERNAL address pool
Group Policy - by default-DefaultACVPNGroup
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the http
inspect the they
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:423c807c0d63cb3e9aeceda977053f84
: end
ASDM image disk0: / asdm - 623.bin
ASDM location Camille 255.255.255.255 INTERNAL
ASDM location INTERNAL CGT-external 255.255.255.255
ASDM location INTERNAL SITE1-LAN 255.255.0.0
ASDM location INTERNAL SITE2-LAN 255.255.0.0
ASDM location INTERNAL training3-LAN 255.255.0.0
ASDM location INTERNAL training3 - ASA 255.255.255.255
ASDM location INTERNAL GDO 255.255.255.255
ASDM location INTERNAL SITE1 - ASA 255.255.255.255
ASDM location INTERNAL SITE2 - ASA 255.255.255.255
ASDM location INTERNAL training3-VOICE 255.255.0.0
ASDM location puppy 255.255.255.255 INTERNAL
enable ASDM historyI should also mention that my test clients are a combination of Windows XP, Windows 7, and Windows Mobile. Other that in specifying the preshared key and forcing L2TP/IPsec on the client side, the VPN settings on clients are the default settings with the help of MS-CHAP/MS-CHAPv2.
You must configure * intercept-dhcp enable * in your group strategy:
attributes of Group Policy DefaultRAGroup
attributes of Group Policy DefaultRAGroup
Server DNS 192.168.10.4 value
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
value by default-domain somewhere.comIntercept-dhcp enable
-Latptop VPN clients (which I assume are on windows computers) is also the * use on remote network default gateway * box unchecked. It is located on the Advanced tab of VPN client TCP/IP properties. Select Client VPN > properties > Networking > TCP/IP Internet Protocol > properties > advanced and uncheck the box.
Alex
-
No split tunnel-access internet via isa in dmz
Hello
I have configured my asa 5520 v 7.2 for remote VPN. Its works fine. I need to provide my customer internet access without activating split tunnel. I went through a few example below of a doc:
the preceding is not enough more me like one have different needs
I want my client VPN to ASA and access to internet, I had ISA connected to the VPN device. All my vpn clients want access to the internet, it must use this operation to access the internet. My ISA server is in the same subnet of the VPN device by using a different gw for internet access.
Pls comment
Add the below: -.
attributes of the strategy of group staffvpn
use a MSIE-proxy-server method
Internet Explorer-proxy server value x.x.x.x
Disable Internet Explorer-proxy local-bypass
attributes of the strategy of group staffvpn
use a MSIE-proxy-server method
Internet Explorer-proxy server value x.x.x.x
Disable Internet Explorer-proxy local-bypass
attributes of the strategy of group newstaffvpn
use a MSIE-proxy-server method
Internet Explorer-proxy server value x.x.x.x
Disable Internet Explorer-proxy local-bypass
adel username attributes
use a MSIE-proxy-server method
Internet Explorer-proxy server value x.x.x.x
Disable Internet Explorer-proxy local-bypass
username weppe attributes
use a MSIE-proxy-server method
Internet Explorer-proxy server value x.x.x.x
Disable Internet Explorer-proxy local-bypass
Remote VPN group no matter what you want to test with. where x.x.x.x is the IP address of the ISA server computer.
HTH.
Maybe you are looking for
-
[BUG] No notification during calls Facetime
Hello world I'm having some trouble since I update my iPhone to iOS 10. Since then, whenever I'm the call on Facetime, Messenger or WhatsApp (CallKit problem?) and I lock the screen, my phone buzzes, lights but no notification is shown on the lock sc
-
Pavilion dv2700 Notebook with VISTA Recovery
Pavilion dV2700 Entertainment PC Intel Core 2 Duo CPU T5550 @1.83 GHz 3 GB RAM WINDOWS VISTA HOME PREMIUM SP2 A defragmentation was attempted due to the slowdown operation. But he ran for nearly 18 hours without completing. Someone, then power off t
-
Problems installing Office 2007 updates KB2289158 and KB2413381 for Windows 7 64-bit
Original title: KB2289158, KB2413381 for Windows 7 64-bit updates Remember - this is a public forum so never post private information such as numbers of mail or telephone! My automatic update for Windows 7 64 bit does not work for updates KB2289158 a
-
BlackBerry Z10 save on the home screen does not not after restoring
Hello My Z10 was stolen last week, fortunately I did a backup of a few days before. I bought an other Z10 now restored my backup for it and everything seemed to go very smoothly. Until I tried to save a url from the browser to the home screen. The pr
-
User account control does not not correctly under WIndows 7.
I'm having a problem with the user account control. It appears each time I run a program, even if my settings are different. How can I fix?