Static IP on FRDM-K64F problems fixed?

Similar Questions

• Client proxy (on USB) with DHCP address assigned IP does not work with FRDM-K64F

  Hello

  After reading the questions on this forum with a static IP address on the Freescale FRDM-K64F set, I went for a DHCP address, but I can't get the proxy client to work via USB with DHCP connection either.

  My console tells me the following:

  Time of RTC: sea-2014-01-01 00:07:27

  Network initialized

  IP address: 10.143.xxx.yyy (xxx and yyy is real numbers, just change them to the forum of letters)

  Subnet mask: 255.255.252.0

  Gateway: 10.143.xxx.yyy

  MAC address: 00: 0C: 00:06:70:00

  And when I try o connect with the following command:

  java-jar proxy.jar - socket 10.143.xxx.yyy

  I get the result without CLI interface and next:

  Trying to open the socket with device connection: 10.143.xxx.yyy:2201

  [Connected to the Jack: Socket[addr=/10.143.xxx.yyy,port=2201,localport=49605]

  Open channel 8 with hash 0x130399b3

  Channel 8 CLOSED-> OPEN

  notifyResponse AVAILABLE_RESPONSE on channel 8

  AVAILABLE OPEN-> 8 channel

  Open channel 9 with hash 0 x 0

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  I don't know if this topic but my version of java is:

  Java version "1.8.0_31".

  Java (TM) SE Runtime Environment (build 1.8.0_31 - b13)

  Java for 64-bit Server VM (build 25.31 - b07, mixed mode)

  Any ideas or am I missing something completely?

  Thank you

  Andy

  Hi Andy,.

  your log shows that the proxy is connected with the Board of Directors.  To start the CLI, you can either provide '-j' have ' touch to the proxy command line or PuTTY simply connect to localhost (raw Protocol, port 65002)

  / Sergey

• Form factor of the Arduino R3 on FRDM-K64F pins available

  Hello

  I just got my board FRDM-K64F and I would like to add some sensors to it to test it. I read that the Board has a form factor of the Arduino R3™ pins available and I don't know what it means when I buy sensors (i2C, SPI, UART interfaces) to this Council. I understand that I can just connect any sensor with cables and a model but I thought perhaps this provision of the Arduino R3 pins is something that makes it easier?

  As you probably can see, my skills of HW a little bragging...

  Thank you very much

  Andy

  Hi Andy,.

  It's GPRS Shield V2.0 - Wiki.

• LED power button problem FIXED on Satellite P300

  Toshiba
  LED power button fix

  Toshiba
  Satellite P300-h-13

  By Thom
  Wijtenburg

  First of all, I would like to
  say you that I came up with this correction, after a clean reinstall of the
  Vista. (I used the serial number of windows on the bottom of my laptop for)
  install, so it's the same license as the OEM of windows and therefore
  Tout_a_fait legal.) After the clean install and installation of all the
  the drivers listed on the site of toshiba LED power button (also
  known as the mute button) and the CDDVD butten (mediaplayer button)
  stopped working. After browsing around forums toshiba I found
  this case, I removed the support button utility that the mute button has acted as
  a mute button. Also the mediaplayer button worked fine. Reinstalled
  the utility support for the button and they have stopped working. After many
  toshiba calls (I think about 5-6 in one day) they opened a
  support ticket for me, because they (team support callcenter)
  could not find a solution. Following their advice, I did the
  next to try to make it work:

  * Don't have a system restore with the restore DVD.
  * Do you have an another clean install.
  * Install the drivers in various ways (alphabetically reversed by alphabetical order and order of collection DVD).
  * update my BIOS.
  * downloaded a 'new' version of value added package (which was the same thing I already had).
  * installed the VAP with and without technical support button utility, no changes.
  After doing everything
  This, they said that they did not know the cause of my problem (at the beginning
  they thought it was hardware related). They came with a possible
  anwer:

  "It is."
  possible that we removed some features of windows vista
  operating system so that our one utility for device drivers
  work. In addition, we do support the configuration, that we delivered
  When you bought the laptop. »

  Now of course, I have
  understand that. I waited allmost a week, no response. Neither
  by electronic mail, or by phone, so I decided to google more
  on the problem.

  After a certain
  some research on Toshiba forum and Googling I came across
  a thread that sayd I must first install the utility 'control '.
  and the button press. Unfortunately what it did not work.

  Then, all of a sudden
  Windows displays a message saying that I should install the TOSHIBA.
  "ACPI-based value-added general use and logical device driver.
  I clicked on the provided download link, and the VFR package was a newer version
  version of the support page for my laptop which is held. So I downloaded
  This PPV version 1.17 and installed it. After a reboot, the buttons
  still did not work. But at least I got the file HWSetup.exe, where I
  could turn the LED off. Look into the button holder utility, I have
  saw that there where buttons like "Toshiba Assist" which my
  the laptop model is not.

  Navigation
  through the toshiba forum I found a file named ButtonSettings.ini, in
  which I can manually configure special keys. After a google
  search on the name of the file, I found that all the buttons list
  in a registry key. I saw the "Dimmer" file using the button
  folder and clicked on it. Poof... lights went out. Click again,
  Poof... lights turn it back on. So I replaced the wrong button definitions
  with CDDVD and dimmer values. Saved my changes but is not a restart.
  Opens the support button utility and change the path of
  MediaPlayer (who was always there to a previous definition) to
  Dimmer.exe. checked to see if the button CDDVD pointed
  MediaPlayer and restarted. When everything has been started, I pushed on the
  button again and presto... MUTE lights off. Pushed again, poof...
  lights. Pressed the mediaplayer button and started to mediaplyer. I have
  has been very happy when everything worked.
  Now that you
  know the story, here's the fix.

  * Difficulty: *.
  * Download and install the new VAP from here: [http://cdgenp01.csd.toshiba.com/content/support/downloads/util_tvap_26084A.exe]
  * Choose Edit in the installation and make sure that everything is checked
  * do NOT restart after the installation.
  * Download the ini fix and the fixed registry
  * Uncompress its contents into your working folder.
  * Copy the ini into C:\Program Files\TOSHIBA\TBS (where C: is the drive of program files)
  * In this same folder, start the exe called TBSbtnSt.exe
  * do NOT restart, click on 'no' in the dialog box.
  * Double click on the registry key, and then click 'Yes' to add to the registry
  * Then open the button support utility by clicking Start-> Toshiba-> utilities-> Toshiba assist. Help go to optimilization and click support button tohiba
  * If the path or the description is disabled, fix, and then click Save. See also if the CD/DVD mediaplayer points.
  * Restart you computer now.
  * If everything is is well past your special buttons should work.

  * WARNING: *.

  It worked for
  me, with my Toshiba Satellite P300-h-13, edition windows Home premium 32-bit.
  It should work on any model of 6 buttons with the mediaplayer and the mute
  buttons. I am in no way responsible for any damage that may arise
  If the fix does not work correctly. There is absolutely no. GARUENTEE
  It will work for you. If the answer is Yes, he does, and if it's not it
  doesn't work.

  * Author: *.

  I came
  With this fix by myself, without any help from toshiba support. I am
  the original author of this text. This document is for information
  purposes and should not be modified in any way.

  This page is
  also hosted on my Web site for documentation purposes. I have
  contacted toshiba support on my support ticket and has asked to
  Cancel and read this. I have also explained in the world.

  Wow, that's really cool! I think that a lot of users here would appreciate this extraordinary well documented fix.

  Thanks dude. :)

  Welcome them

• E280/radio-alarm clock/dock problem FIXED!

  (Not that anyone else in the world probably will never have that problem... ;->)

  But in case someone ever does it, here is the solution.

  ************************

  Reminder of the problem:

  Sansa and Timex clock radio play together well

  http://forums.SanDisk.com/Sansa/board/message?board.ID=E200&thread.ID=29319&view=by_date_ascending&page=1

  OK, I officially * had * it! (e280, clock radio and now dock)

  http://forums.SanDisk.com/Sansa/board/message?board.ID=E200&message.ID=30169#M30169

  ******************

  After communication with Sandisk (they * will keep talking about you, I'll give you em that...!), received suggestiion put in MTP mode and rename the folder 'Rhapsody' folder 'Services', if such were present.  Computer would only remove, so I again asked if the deletion was OK and if having a folder 'Rhapsody', it turns the e280 thought I had or used to have a Rhapsody subscription.  Positive on these two points, so I deleted the folder.  Problem solved.  Fix five minutes, including waiting for the computer to start...

  Follows my email to Sandisk.  (It's * my * e-mail, so I figure that I can copy it anywhere I want and he said what I have to say about the problem... ;->))

  *****************

  'Rhapsody' folder deleted. Unit works now fine with Sansa docking station and radio alarm clock.

  Wish that someone had told me about this simple correction much earlier. (Like $500 earlier!) My husband and I love all the e280s and the docks and wake-scattered, in fact, and I guess we'll get our money out of them before die us, but what I originally wanted was to get the first e280 to work with radio-alarm clock, as it did before the problem started.

  I * could * have waited until the initial problem has been fixed (possibly) instead of going on a buying frenzy, but I was afraid that if one) I waited and b) the problem has never been resolved, I would not be able to get another e280/clock radio, since the e200 series had been replaced by a new range of products.

  Suggestions for Sandisk:

  Format should mean FORMAT! I don't know if I find more amazing than the left repeated formats this Rhapsody folder in place or that it took so much communication with you all luck to someone who knew that. It's not as if I did not mention Rhapsody first - due to my chance to see only fleeting message when the problem started, it was the * first * possibility I mentioned, I think.

  It's also a problem the Amazon, DRM-free tracks somehow did it think that I had an expired subscription to Rhapsody, when I've never been and won't be anywhere * near * Rhapsody! (Especially after this experience!)

  It would be nice if everything was at least * visible * in MSC mode - I didn't on this issue because it does not appear in the mode I use! If I * saw * it in MSC mode, I tried the suggested fix original (rename) on mine!

  It would also be nice if your future mp3 players were more like the e200 series. I'm not terribly unhappy to have a bunch of e280s (well good, except for the money...), because I think they make your current line look sick.

  IMHO, FWIW... ;->

  And thanks to at least talk to me until the issue is resolved (if any) - I'll say that for Sandisk!

  You answer to me so that I can mark this FIXED!

• Troubleshooting said printing problem fixed, but this is not

  I am running Windows 7 with a Dell 720 photo printer. I had to download a printer driver, the printer is not compatible with Windows 7, but support Dell says I put everything. Everything was fine for a while. Then a gummed up print job works. Nothing will print and I can't delete the file that is causing problems. Troubleshooting, says the issue is resolved, but it is not. I tried to delete all the print jobs, but it will not go away.
  Thanks for all the ideas.

  Hello

  References to Vista also apply to Windows 7.

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Spooler service (this is for Vista so change the page to Windows 7 if necessary on the right side of the Print Page)
  the same service)
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Creative cloud will not install a willingness of manager Adobe application not install, I tried everything to uninstall reinstall Mac cleanser you name what can do and who should I contact to get this problem fixed

  Creative application Cloud Manager and application manager Adobe decided to stop working one day so I uninstalled the program and tried to reinstall them. Now they do not reinstall and will keep gives me an error message I tried Mac cleaner I tried to completely uninstalled programs and reinstall them. I even used Time Machine backup before I uninstalled programs. I did all the forum can try and fix this problem and still nothing will happen what I do and who do I go to get this problem resolved?

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat... not supported on weekends.

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• CSS code for the background of the image problem fixed

  Hello world
  I struggled for almost 2 days on and outside to try to understand why I can't get the codes for a fixed background work properly. I'll copy the code here directly and hope that someone can see what the problem is. I also give a link to the site I'm just starting to be implemented.
  http://seanshaw.NET So you can see the source code here... Any help would be greatly appreciated as I have tried 3 different versions of the code fixed background and none of them does not work for me. What Miss me? :)
  
  Thanks for any help on this problem... Best regards, Jo Whimzicals.com
  
  The code that I currently use is this one... I take you from the top to the body tag:
  
  <! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional / / IN".
  " http://www.w3.org/TR/html4/loose.dtd" >
  < html >
  < head >
  < style type = "text/css" >
  body
  {
  background-image:
  URL ('BckgndHome.gif');
  background-repeat:
  no-repeat;
  background-attachment:
  fixed
  }
  < / style >
  < title > Sean Shaw Art, Art of Sean Shaw < /title >
  < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 ">"
  < style type = "text/css" >
  <!--
  body, td, th {}
  do-family: Verdana, Arial, Helvetica, without serif.
  }
  {body
  background-image: url(Home/BckgndHome.gif);
  }
  {.style2}
  do-size: 18px;
  color: #FFFFFF;
  }
  .style3 {color: #FFFFFF}
  ->
  < / style > < / head >
  
  < body >
  ==============================
  Just to clarify things, I also tried these two codes, that makes perfect sense to me, but they still do not work for me.
  ==============================
  < style type = "text/css" >
  Body {background: url (fixedbg.gif) set of Center no-repeat ;}}
  < / style >
  =======================
  ... and this one...
  
  < html >
  < head >
  
  < style type = "text/css" >
  body
  {
  background-image:
  URL ('image.gif')
  }
  < / style >
  
  < / head >
  
  < body >
  < / body >
  
  < / html >
  
  

  Ahhhhhhhh, Thank you VERY MUCH, ACE! I found and removed the second command line, and you were quite right... the bottom now remains in place and works perfectly. Thank you for taking the time to help me... Awesome. Have an awesome Sunday... Best regards, Jo :)))

• Problem fixing copied VHD on a VM machine clustered

  Hello

  This morning as a test for a backup solution proposed, I met a problem connecting to a virtual hard disk volume hyper v on a computer in a cluster of Viryual.

  Windows 2008, 3par SAN, high availability cluster

  The criterion at issue create a copy of a LUN on our SAN and then exporting it to the cluster high availability to connect the virtual machine to finish with two versions of the VHD that is connected to the same VM.

  First I had problems of connection of the copy for the storage of cluster, but change the id of disc with part of the disk that sorted. (export to a stand alone server)

  what I can't do is to connect the hard drive virtual copied to the VM as well as the original... The error is that the virtual hard disk is already connected... so there is a problem of identical ID somewhere...

  I changed the ID of the VHD volume by attaching it to another machine (which works so its bound to the virtual machine), but this has not solved the problem.

  I don't know what another hyper-v can be compare to make him think that he is the same virtual hard drive, I'm trying to connect.

  Can anyone shed some light on this...

  Peter

  Hi Peter,.

  Please contact the Microsoft Community.

  I wish that post you your request here-

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  We know if you need help.

• Windows Update common problem/fix error/no answer

  recurring problem of windows update does not update its program, which leads to no automatic update works correctly.

  jetroam,
  Take a look at these articles and after return.

  What to post in the Windows Update forum

  Solve Windows Update installation issues

  Troubleshooting Windows Update: offered on several occasions to update

  Last Windows Update Agent

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I quickly in crisis with screen //blue 0x0000008e errors / /... I can't get the problem fixed and I've had several blue screens so he tried to ask this question

  I'm getting these critical error messages more frequently... This leads me to madness, and killing my joy of the internet... What's the problem? What should I do to correct the problem?

  It is important to know the exact information of your BSOD. Here is an example:

  http://3.BP.blogspot.com/-KY-oLlip7Qc/TdsxBVe5HBI/AAAAAAAAAKg/jfPhRWI1BMU/S1600/bsod_w2k.PNG

  No need to include all the verbiage of course. But the 'Technical information' part on is necessary!

  Also, has your PC been recently infected with malicious software to your knowledge?

  Are there other devices currently connected to your PC? If so, the BSOD disappears if you detach (leaving only the mouse, keyboard and monitor)?

• Install any software or blackBerry software problem fix

  I have this problem. recently my phone does not seem to connect with my pc. I used. There is no other major facilities or something else

  When I opened the Link BB software, it says that there is an update

  so to put in place the new update, the installer says there is an error: the account already exists

  so I tried to uninstall the software. the same problem.

  I downloaded the latest version and tried to install it there. the same problem.

  now when I try to repair the software, he seeks the .msi file from the version, I did not.

  I'm trying to repair the 1.2.3.23 version and update to the latest version 1.2.3.55

  Please can someone give me a solution to this problem. I really want to connect my phone to my pc to access files

  No do not touch the registry, using Windows Search (Advanced) and research (Everywhere) enter (blackberry) in the search field, find and delete all the files in the blackberry except those in your Documents that you want to keep or delete those also.

  Turn off your computer, not reboot, Power On, wait 5 minutes and then install the final link of BB:

  https://swdownloads.BlackBerry.com/downloads/contactFormPreload.do?code=A8BAA56554F96369AB93E4F3BB06...

  Do not delete the installation program, keep in the folder you downloaded to and do not change the location of the folder after the installation.

  If you want to keep the Setup program in a folder of your choice or a newly created file download the Setup program in that folder.

• Problem fixing existing vmdk to the new virtual machine

  Hello

  Just upgraded to Fusion 6 and things seem ok (except for the dreaded license bug, but it's ok now).

  I'm having a problem attaching a form of virtual disk existing a VM - operation - existing. Basically, all the vmdk files are grayed out and non-eligible, regardless of the option to share / copy / to support the disc.

  I checked that I have full R/W access to the fie (and it works fine if I fire up the other virtual machine).

  Any idea?

  Well I ended up adding another player new to the virtual machine, I wanted to and the drafting of the description of disk (Disk DescriptorFile #)

  in the manually - vmdk file works great...

• AVCHD stutter problem - fixed at 5.5?

  Hey gang,

  I was one of the first to own a new FS100 Sony where you shoot AVCHD.  Great camera!  I was a user of digital SLR (am still) and loved how first cs5 handles images.  But now that I use AVCHD... I noticed that playback stutters like crazy to something else than to full resolution.  This parasite is not there when I switch to full resolution, which is too much for reading with the applied color adjustment.  I NEED to playback of lower resolutions.  I have the newest version of CS5, and the problem persists.  I have a monster system... so that's not all.

  So my question is... does this glitch occurs in 5.5?  Can anyone confirm this?

  I'll open a ticket on it.  Its a silly glitch.

  There are some AVCHD performance enhancements in first Pro CS5.5. You can download the trial version and see for yourself.

• problem fixing KB974431 update

  I tried sfc/scannow sfc.exe and the previously displayed solution.  The cmd screen says that http'/ / is not recognized, but shows that I correctly typed http:// and the rest of the address (7.4.7600.226/windowsupdateagent30-x86.exe, I tried several times and everything works until I hit the download http:// address - then it does not recognize.  Still can't download the KB974431 update

  Hi touchefriend,

  Welcome to the Microsoft Answers Forum!

  We would like to know more information about:

  ·         You try to download the stand-alone package of the KB974431?

  ·         What browser do you use to download the KB974431?

  ·         If it is Internet explorer, please provide the version of Internet explore

  ·         Provide us with the exact error message and the error code that you receive all trying to download KB974431

  We recommend that you download the stand-alone package of KB974431 of the link below and check if that helps: an update is available to improve the stability and reliability of Windows 7 and Windows Server 2008 R2: http://support.microsoft.com/kb/974431

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.