status: error in the queue

Similar Questions

• Get Queue Status output / empty the queue

  Hey everybody,

  I am trying to create the program that will record all the data in a queue after a number / deadline is met.

  However, when you try to save the output of the Flush queue / status of the queue, I'm not sure how to proceed. My original entry is a group of 4 elements.

  The output shows that it is "an array of clusters of 4 elements..."

  My initial approach was to: change of the table to a group (of 8 items)-> separate each element in another group 4 elements-> merge each specific item to get a unique flow of each of the 4 original elements.

  Result: 1 table-> 1 cluster-> 8 clusters-> 4 data streams, each stream of data representing one of my pieces of original entry (my goal).

  However, this seems to be a long process and I can't help but feel that I'm on in a much simpler way to do.

  I would now like to know if it's the only way I can save each of the indivudual 4 elements in the original 'picture of clusters of 4 elements' produced from the Flush queue / status of the queue?

  Also, is there a way to save/log ALL the data directly from the Flush queue / get an output of status of the queue (jump cutting/splitting of process data)?

  Thank you!

  What you really want to do, is use Dequeue item inside a FOR loop.  Inside the loop, ungroup you your cluster and the output values of the wire.  Let the loop FOR the autoindexing and you will have a different picture for each item in your cluster.

  See the example I did here: http://forums.ni.com/t5/LabVIEW/TDMS-File-starts-recording-data-at-20Hz-but-after-a-short-time/m-p/3...

• All printing errors in the queue for a shared printer

  I have a HP6110 connected to an XP machine.  It is shared and the printer is installed on a computer vista laptop.  I could print however now each job is in the queue and then goes into an error state.  The only way I can remove the task from the queue is to restart the print spooler.

  How can I fix once and for all?

  Well, I never aspired to be certified MCSE on NT than a few computers existing except in places like Bletchley Park to crack the enigma code messages .

  Deleting the files in the folder is at the heart of the fixing of the problem if my hypothesis about your problem is correct. The problem is one of the frequently reported printer problems.

  Don't forget to tell me the version of Adobe Reader, you?

• I just installed Adobe CreatePDF desktop printer, when I try to use from Word or Excel, it does not work.  The print queue Adobe says "error" in the status display.  I uninstalled and reinstalled.  Any ideas of what to do next?

  I just installed Adobe CreatePDF desktop printer on a Windows 7 PC at home.  When I try to use Word or EWxcel, it does not print.  The queue of the Adobe print device reports an "error" in the status column.

  The CreatePDF desktop printer is removed. Please visit https://forums.adobe.com/docs/DOC-5131 for more information.

• Windows 8, the error message indicates printer does not print. It prints, but does not remove the queues

  I use Windows 8 Pro, 64-bit on a printer of a6700y Pavilion with a printer PhotoSmart 310. When I print, I get an error message saying that there is an error, and the document will not print. The document prints correctly, but will not remove the file in the print queue... I have to manually delete the file in the queue. Of course, it's a software problem. How can I solve this problem?

  Hi eri2198859,

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.
  
  I would like to know what are the errors you receive?
  
  http://www.HP.com/go/tools

• Probe provides incorrect information on the status of the queue

  In LabVIEW 2009, the probe provides incorrect information on the status of the queue. I got and queue without name, did a Flush queue and queue 5 times zero double precision values. Function Get queue status display 5 items in the queue, but a probe placed on the queue outside (queue Refnum) wire displays:

  "queue [11] out without name - 0 items from queue - 0xbd600008"

  I can't get a probe to correctly display the number of items in the queue when I place it on one of the queues of the son.

  Why the probe displays a number of items in the queue?

  dbaechtel wrote:

  Why the probe displays a number of items in the queue?

  It's a bug.  I was able to reproduce the results of dbaechtel.  I tried to fathom in several places and got "0 queue" in all places.  Name of the queue does not affect the outcome of the probe.  It must be a bug.  However, the elements # in the output queue of the waiting state is correct.

  

• Error to the element of the queue with simulated signal, but not with the DAQ hardware

  Hello.  I get an error code 1 when I run my VI in simulation mode, which is only 3 simulate subvis signal at different frequencies.  The block diagram shows jpg file and the probe is after I stop the VI.  Note that there is an invalid refnum.  I don't know why that is.  I am also including the watch of the probe after a few iterations, there is no error on the probe 64 until I stop the VI, and also noted that there have been no queue items.  This of course means that I don't get to remove the data in loop 2.  An interesting note is that the system works fine when I run the program in data acquisition mode, which is the other case behind the 'simulate signals. "  In this case, the only thing is the DAQ assistant and dynamic data of the tunnel cable.  Everyone can't see what I could do wrong?  Thank you.

  Thanks for looking at my post.  I thought about it about five minutes ago.  I didn't have a timeout on the handeler event, so it was not double check for new items in the queue.  I don't know yet why the probe shows showes that items have not put in the queue because they certainly were.  Maybe "queue items 0" means that there are no items saved in the queue. ?

  Your concern is interesting and deserves a check...  I just ran it without registration, and it seems that the release of the case (the default) record structure is just an empty DDT, a placeholder, I guess.

• HP Photosmart 7760 printer will not print, the error message in the queue

  I have Mac 10.6.8.   Printer (HP Photosmart 7760) has stopped working.  Reinstalled the drivers updated. Went through the steps including unplugging cables USB and all the other steps recommended by HP. When I press print, the document goes to the queue and and the error message is displayed. When I press the resume to print, nothing happens.

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• When I try to print, the queue varies from 0 document (s) in the printer queue: error

  * Original title: printer: error

  Overview:

  I have a Dell 560 which has Windows 7 64 bit is installed.  My printer is an old HP Officejet v40xi.  Have had two e connected by a USB cable for 3 years.

  Location:

  I ran out of ink.  I had not been printing a lot, so I did not fill the cartridges for several weeks.  I had a bright idea to reinstall the printer software for the printing/tool box I used on another computer.  I wanted to do a scan.

  I deleted the software and tried to download the software again.  The disk could not be downloaded on Windows 7 64 bit.  So I got the software from the HP site.

  When I try to print, the queue varies from 0 document (s) in the printer queue: error.  I reloaded the software twice, I put on a new USB cable and I changed the port.  I still get the same message.  Troubleshhot Windows printer also, indicates that it cannot determine the problem.  I went to HP and did not find any help.

  Does anyone know how to solve the problem?

  Hello

  -What is the full error message?

  I suggest you link and check if that helps.

  Unable to print? Print jobs are stuck in the print queue

  For more information, see the link.

  Solve a problem

  If the problem persists, contact HP support for help.

  Let us know the results. We will be happy to help you.

• Photosmart 2610 usb connected stops printing in the queue; error noted. IMac os 10.6.8. prints test page

  I used all-in-one HP Photosmart 2610 for years without change. Now everything is print spooling with non-descript "error" when it is in the queue. I can print the test page for the utility and I can print via the usb connection to my laptop which has supposedly the same software and updates. I uninstalled and reloaded the software updated and get a message that the software has been installed successfully. Install HP works OK and the dashboard widgit working to show supplies. But the printer in the printer/Fax preferences poster "information not available" when I check for supply levels.

  When I try to use the printer utility I get a message "some components installed on your computer have been developed for a different version of the HP utility. These components will not be loaded and some features related to your device cannot be accessed ".» I downloaded the latest version of the software and reinstalled my original software CD and cannot always my computer to print.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Trying to empty the queue through dbms_aqadm resulting in error

  Hello

  I'm emptying the queue through dbms_adadm in the respective user schema, resulting in error

  Procedure:

  DECLARE

  Po dbms_aqadm.aq$ _purge_options_t;

  BEGIN

  Po. Block: = FALSE;

  () dbms_aqadm.purge_queue_table

  Table of the queue = > 'XYZ_QUEUE_TABLE '.

  purge_condition = > po);

  END;

  /

  Error:

  PLS-00201: identifier 'DBMS_AQADM' must be declared.

  Check if the required privilege is granted to your USERS access to the SYS. DBMS_AQADM. Also if a public synonym for DBMS_AQADM is not defined then you will need to prefix SYS during the call to the package.

• Application Manager - error recover the status of the component

  Hello!

  I managed to installed Portal 2.1 with load balancing and access to outside and inside, everything works as expected. In my environment, there are two nodes in full mode and the other with the mode 'connector only. In the health care system, on the single node connector I have message: Application Manager - integrated components: error recover the status of the component. I think it's fair. Connector do not work in the application manager, why this message?

  Kind regards

  Piotr

  How this camera only mode connector has been installed? Clone you an existing instance? or you have not deployed a new machine virtual dice EGGS and chose this role?

• How to report errors in the DB using Adaptors(Davanced queuing) AQ...

  Hi all

  I have a requirement like I need to write adapters QA error information.

  I created a demand on adapters QA model, I do get I dea how to call this service in the Catch block and pass the info on to this service.

  Thanks in advance,

  Raj.

  Hi Daniel,.

  By writing the AQ adapter error, do you mean in writing to the queue of the QA?

  You should not create a separate application for her. In your catch block, you can call AQ adapter to pass the info. And before you create the AQ adapter, you must create the DataObject (format of the data), the queue table, then queue.

  Please let me know if you need more information on this.

  Thank you

  Vikas marzouk

• Error "Inverted threshold" on 'Activate changes' after creating the queue

  Hello
  
  In the Console of Administration Weblogic Server I'm trying to create a new queue by clicking 'Lock & Edit' first and then create the queue. When I do this I get an expected: message "the JMS queue was created successfully", but when I then try to click on 'Activate changes', I get a: error message 'reverse threshold '.
  
  Log file shows: failure is produced in the execution of the request of deployment with the ID '1368101884686' for the task "weblogic.deploy.configChangeTask.2". Error: ' java.lang.IllegalArgumentException: reverse threshold ' java.lang.IllegalArgumentException: reverse threshold
  
  Any ideas what this error?
  
  Thanks in advance.

  The below error when the values of the minimum and maximum thresholds for Server JMS, JMS or JMS queues subjects have been unsettled.

  "" java.lang.IllegalArgumentException: reverse threshold ".

  These values are stored in the Server JMS to manage flow control, since excessive values can cause saturation of memory which can cause the server suspended or slow processing of messages. Similarly for queues and JMS topics, values thresholds are defined to trigger events for logging and launch control message to the destination stream.

  To resolve this issue, please make sure and set the value of 'Messages threshold' and 'MessagesThresholdLow' as below:

  JMS servers
  Threshold messages > = MessagesThresholdLow

  JMS queues
  Threshold messages > MessagesThresholdLow

  JMS topics
  Threshold messages > MessagesThresholdLow

  Please refer to the following document for more details.
  http://docs.Oracle.com/CD/E24329_01/Web.1211/e24390/jmstuning.htm#PERFM315

  Thank you
  Vijaya

• vCenter 4.1/ESXi 4.1 material status "Communication error with the server.

  I am slot that a brand new installation of vCenter with two new installs of ESXi 4.1 connected on it. I use on Dell PowerEdge 2950 s ESXi servers. I tired the customized version of Dell and vmware ESXi vanilla version. My host vCenter is Windows 2008 R2.

  In vCenter, the two server ESXi, any version of ESXi, I run, I get "Communication error with the server" error when I click the tab hardware state. No data appears in the hardware status tab.

  Only suggestion of Dell has been updated with firmware/BIOS on the server level. I did and it did not help.

  Anyone has any suggestions or ideas what would cause this?

  I had exactly the same problem what is to have everyone on this thread.  I finally called VMware support.  It is certainly a problem with Tomcat.  Apparently, during my initial installation of tomcat server vCenter (on a Win2k8R2 vanilla Server / unreleased) na not create a database file.  The vCenter Server uninstalled eventuall tech and went through the Setup again.  For some reason any Tomcat created db it's good the second time.  After installation, it takes about 5 minutes for the db should be created.

  On Windows 2k8R2 it is located here: C:\Program Files\VMware\Infrastructure\tomcat\lib\xhiveConfig\data

  The name of the comic is VcCache-by default-0. XhiveDatabase.DB

  My server didn't have one at all.  The relocation has created, at the beginning it is 0KB in size.  After 5 minutes, it grows up to 25, 600KB.

  Everything in my vCenter works now correctly.  I'm on 4.1.320137

  I hope this helps.

  Dave