Still in CS-5 Premier Pro not working

Similar Questions

• HP Scan Pro not working/Scanner works does not Note: problem still unsolved

  I recently installed snow leopard and that you have not used the hp pro scan up to that earlier.  I opened and it takes some time to load with the color wheel rotation and I have to force him to leave.  Prior to that, he said that no scanner could be seen, so I reinstalled the software and now he notices I guess because it does not display this error message.  I got it to start scanning, but then he stopped at half way through and had to leave.  Are there updates or something again, that I need for the HP Officejet 6500 Series?

  Thank you.

  Message edited by cwcbiker on 09/15/2009 08:17
  Message edited by cwcbiker on 09/15/2009 08:18
  Message edited by cwcbiker on 09/15/2009 08:18

  Hello

  The HP Scan Pro software from the 10.5 software does not work with Snow Leopard.  Scanning is built into Snow Leopard now.

  If you follow the instructions in the following document, it will guide you how put it in place and running.

  http://support.HP.com/us-en/document/c04510394

• HP Color LaserJet Pro M177: HP Color LaserJet M177 Pro not work small screen

  Dear Sir.

  using this printer can be 1-2 months.

  In the last time I see this little screen does not work, I mean the printer does print, scan but small screen does not.

  But if I reboot printer it works and show me the HP logo, and then when turn on it does not display all...

  Help, please

  Hi @Chumayu,

  Thanks for getting back to me.

  It would seem that something was wrong with the hyperlink.

  Please try either of these links:

  • http://ftp.HP.com/pub/softlib/software13/COL54052/kJ-141652-2/M177_Series_FW_Update-20150228.exe
  • http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

  Please reply to this message with the results. Good luck!

• The Premier Pro - not the latest version?

  I thought by buying the subscription to Premier Pro he wanted to keep me up-to-date with the latest version.  Is - not correct?  I'm on version 7.2.2 (33), but I understand there is a version available 8.x?

  With the first Minister Pro open, I click on help and updates is disabled.  So I log on CC and the search for the update, correct?

• After the last update wmp plugin is missing in Add-ons, but is still correct installed. Reinstall will not work. What can I do?

  I been lissening to online radio. Necessary to update Firefox. After the last update the windows media player plugin has disappeared from the list of Add-ons, while always being correct installation. I reinstalled it, but that has not worked. I have replaced/deleted some files in firefox as suggested, for similar problems, but that no longer works.
  Now, I can not play wmp files on firefox.

  Hope you can help me solve this problem.

  Found a solution:

  Go in Subject: config and change plugins.load_appdir_plugins from false to true. Apparently FF21 assigns the value false by default causing it to not detect plug-ins installed in this way.

• Still 2 WT10 - touch screen does not work

  Sometimes the touch screen does not work or malfunctioning, as does replacing the system and continues. When it crashes I have to suspend the Tablet and wait a bit, sometimes I have to play several times to select what I want. Anyone know what it could be?

  Have a Toshiba Encore 2 WT10

  You said; you have already changed the system.
  What did you change? The ENCORE 2 WT10-A-102 was pre-installed with Win OS 8.1.

  Also, I guess the problem described is related to busy BONE.
  Probably too many applications (apps) as well as the process running in the background and this could lead to short a few drop-outs or performance problems.

• hot spot sleeping Mac Pro not working

  After the installation of El Capitan, I find that I can start is no longer the screen saver slide show, although the hot spot / corner functions properly to begin the Mission control, table edge, Notification Center, office and Application Windows. It also makes display sleep, so everything EXCEPT run the screen saver works.

  The version of the OS is 10.11.5.

  Open system preferences > desktop and screen saver > select screen saver > do you have the first definition after FOREVER. If yes change in 5 minutes and check the show box with clock.

  Select the screen saver > click Preview and select shuffle slide order.

• Still 2 WT8 - B USB do not work

  Hello.
  In my Encore 2 WT8 - B with Windows 8.1 wit Bing, the usb port is capable fo only charge the battery.

  I tried to plug the usb pen drive (with usb-adapter usb-mini) ora olso a HARD but disc does not.

  Someone know why?
  Thanks, Andrea

  Problem solved: I there a cable of the CTA.
  Whit this cable everything is ok: duplicator usb, USB drive, keyboard, mouse...

  Hello
  Andrea

• HP Scan Pro not working not not on HP PSC 1510 while using Mac OS 10.6.8

  Hello all-

  Like others, I've updated my old MacBook Pro to Snow Leopard 10.6.8 operating system and have had problems using the scanner on my HP PSC 1510 all-in-One.

  After uninstalling the old HP software through Apple Software Update, print my HP PSC 1510 and I can scan a document to a TIFF, PDF, etc. using the capture preview and go to the system preferences and select the Print & Fax.    However, it is no longer I can scan to OCR, that was the biggest part of my job.

  I use HP Scan Pro v. 7.4.5, part of v. 1.4.7 HP Device Manager.  HP Device Manager "sees" my HP PSC 1510, but when I use HP Scan Pro, the scanner starts, starts the search, and I get the dialog box "error - Sorry, an unknown error has occurred."

  Any suggestions or advice?  Thanks in advance!

  -Brendan

  Hello

  The HP Scan Pro is an older application, intended for older versions of Mac OS X 10.54 ot.

  Complete Feautre solution software is no longer available for 10.6, scanning is possible via picture Capture, preview and print & fax. Advanced features like OCR are no longer available as part of the provided solution:

  http://support.HP.com/us-en/document/c01846935

  You can check 3rd party applications like Read Iris, OmniPage OCR, etc..

• Wireless LAN not working not

  I have a new HP pavillion d002tx.

  I installed windows 8.1(64 bit).

  and also the driver. But still

  my wireless network does not work.

  Help me in this...

  Waqar thanks... it works now

• C1765 done yellow toner a printer roller noise rattling and the printer does not work

  Hear a clicking noise when printing.  Replaced the yellow toner and the rattling is still strong and the printer will not work.  The noise and the vibration felt on the new toner only occurs with the yellow toner.  What is happening, is the printer goes wrong.  "low density, yellow to replace the cartridge, printer restart" I just put in a new cartridge.

  Hello David,.

  Please post on the forum. According to the information you provided, it looks like you have a mechanical failure within the printer itself. This device is more compact and carriers Dell limited parts, the best option at this stage would be to replace the printer. It is the course of action we would take if the product is under warranty.

  Kind regards
  Joseph E

  #iworkfordell

• Breakpoints do not work in JDE 4.7

  Breakpoints do not seem to work in JDE 4.7. Tried to do a clean rebuild of the project. No change. Ran clean.bat, then made another clean generation. Still no change. Breakpoints do not work. Any ideas anyone?

  UH... who worked. Sorry to bother people. Beginner problem typical: lack of knowledge/new floor/learning.

  This thread never happened. He will self-destruct in 5 seconds.

  Thank you all for your help [smile].

• Plug-and-Play Webcams do not work.

  I have two computers, both running Windows 7 Ultimate 64 - bit, literally installed from the same disk with the same updates, etc. On one of these computers (the one I use the least) my two plug-and-play zero configuration webcams work well and instantly. Instantly I prefer to use, they do not work at all, usually errors to the effect of "the device is already in use", although I have largely ensured that it is not.

  The major difference significant between these two computers on the front of the webcam is that the computer that is running, the driver, a times usbvideo.sys Details and ksthunk.sys loaded to the device, while one who does does not only usbvideo.sys loaded to it. He also stubbornly refuse load other drivers, like "windows determines that the best driver is already installed.

  It seems unlikely a typical software conflict because the two systems have the same software and when the question began the work machine lacked any software work there is no.

  In addition, tools like Microsoft Fixit or sfc/scannow suggested that the machine is perfectly configured, and no combination of uninstall / install drivers and reboot seems to have had no effect.

  I imagine that a clean install of windows would probably solve the problem, but I'd rather not have to resort to that.

  Note that none of these webcams have all the drivers for the seller: they are designed to use plug-and-play. Yes, I checked.

  Does anyone have an idea what could be the cause, or how I could solve this problem without resorting to the nuclear option?

  http://forums.Logitech.com/T5/webcams/QuickCam-for-Notebooks-Pro-not-working-on-64-bit-Windows-7-using/TD-p/414106

  This link had a few promising information to, my registry contained no ksthunk in the appropriate location. I'll have to see if it works after restart.

  Edit: He did indeed. Webcams, works fine now.

• Sound does not work Windows 8 HP ENVY Phoenix 810 PC

  Original title: HP ENVY Phoenix PC 810

  I just put my new computer today and there is no sound. It does not appear to be pregnant anywhere on the screen. Are supposed to be? I also tried to plug the headphones into the top port of the Tower, and still there is no sound! Help, please. I paid a computer person to install this feature for me, now I'm worried, I'll have to return this machine and be the money that I paid for the help in setting this up.

  Hello

  Please contact Microsoft Community.

  Just a few questions first, to get a clear picture of the issue;

  1. Do you see a "Red X" mark on the volume icon in "Notification tray"?
  2. Did you make any changes after you set up your PC?

  This problem may occur if one or more are true.

  • Hardware failure.
  • Audio drivers are not installed or disabled.

  I suggest you follow the method below and check if it helps.

  Method 1: Convenience store;

  1. Press Windows Logo + 'W '.
  2. In "Find", type "Troubleshooting".
  3. On the left, click "Show all" and in the list, click on 'Hardware and devices' to run the troubleshooter.

  Important: After you run the troubleshooter, it is recommended to restart the computer to apply the changes.

  Note: After restarting, try to listen to music and check if the issue still persists. If audio does not work, you will be invited to an "error" or "error Code". I suggest you to make note and respond to us.

  Meet us with the required information, then we can help you further.

• The same time (Edition > Preferences > General) does not work

  

  The same time (Edit > Preferences > General) of her still life Images by default does not work.

  I tried several times. No results.

  What should do?

  Changing the value does not apply to images already imported.

  You must delete and re-import.

  Or simply change the duration in the project window.