stop printing and releases then paper

Similar Questions

• HP printer Envy 4500 does not share print and else, says paper jam

  Just bought HP Envy printer 4500 which is supposed to print on both sides.  I put a copy of a document of two faces in the place where the document is supposed to copy.  I put the function copy, black ink, 2 Facer.     Then, I pressed 'start' and a copy out of feeder.  When I pressed on the two long side once again I get the message 'paper jammed' I called HP and Best Buy and nobody can help you.  HP support says paper I use is the cause.   Excuse me, but this is a multipurpose with 96 bright paper, 20 lb.   Best Buy tech told the paper or the paper type has nothing to do with anything.    I wanted to only two printed sides to save paper, but I can't live without this feature.

  But, for the record, I learned the machine is faulty by Best Buy and return.   I don't think it's paper or defective.   What do I do and where can I find the explicit directions to copy both sides of the paper.  No computer!

  Hello

  The procedure:

  • Press copy,
  • Touch 2 faces
  • Touch black or color

  Now the printer says «face...» "It will copy the first page, do not remove paper.

  • Turn the paper on to the second page (or put the second page on the glass).
  • Press ok

  It will copy the second page.

  Kind regards.

• HP envy 4507: pipeline of filters stop printing and closes

  Hello

  having only bought my printer yesterday ive been using it does not this morning that now he stopped to tell the filter pipeline host and close.

  can someone please. I am based on windows vista.

  I am not that technically minded so would appreciate simple instructions please

  Thank you

  Hello @vicki79 and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you receive errors of pipeline.  I'd be happy to try to help!

  I would recommend starting with a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I recommend also to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP Officejet J6450 (Windows 7 64-bit) - page Test prints and everything is paper jam

  All,

  My Officejet J6450(All in one) was working fine and all of a sudden started showing paper jam. In fact, there is no paper jam, and the "Print Test page" print just fine. If you try to print something other than "print a test page", I hear the sound of rolling paper, the print head moves to print, then a pause and here is the error msg 'Paper jam' tried all the utilities and power off / on etc, but always the same result.

  Help, please.

  Thank you

  Hello

  Thanks for your reply and I solve the problem last night.

  The problem was updated spooler settings the: sort options changed to "print directly to the printer" and disabled the queue. I changed it to winding and everything works fine now.

  Thank you again...

  Bigosh

• the last time I was advised to cli: once again my printer stopped printing and scan do not work

  Can you help me please

  the last time I was aksed p and control-click and replace e print on my printer, but this time I do not see the printer

  -All right, a few different things to do so:

  1. Unplug the USB cable from your printer.
  2. Open devices and Printers window.
  3. Right-click on all labeled HP ePrint printers.
  4. Click on remove the instrument.
  5. Click on any of the other printers listed.
  6. At the top of the screen, click the print server properties.
  7. Click the tab drivers.
  8. In this window, click on HP ePrint.
  9. Click on delete.
  10. Click OK.
  11. Connect your USB cable.

  Please let me know if this allows you to find the printer.

• Photosmart 7510: HP 7510 abruptly stopped printing and now think all inks are running low

  Printer worked very well.  I went to Staples and wanted to buy a black ink cartridge.  Open printer to check what number I needed.  Found it was 564.  Just before leaving for the store, I opened the printer to make sure I had the right number.  Closed quickly as the ink head always moved in position to read.  I had seen the number and does not need to wait for the head to come to rest.

  But now the printer does not print.  A text document comes out of the Virgin.  When I print a report of State printer, in the middle of an 8½ X 11 sheet, all I get are little black brackets with small touches of color in their.  Nothing else on the page at all.  When I print a report from print quality I get some don't color, virtually no black... even though I have a few minutes he put in a new black ink cartridge.  I got indications that he thinks that all inks should be replaced.  They all missed the moment?  No, no, no.  The device seems totally confused.  What the hell happened?

  I tried to clean the cartridges and turn the machine on/off.

  Well, my HP printer did the same thing. I bought a brother.

• Office JetPro 8500 has stopped printing and copying

  This printer wireless installed has been working for more than a year. Now it won't print from my computer or copy of the device.

  I send a print job to it and "print now" appears in the message window, but nothing happens, no error message on the printer (printing error on the printing on the sending computer state). When I try to copy it directly from the printer, I get a message "" now"copy" in the window of the printer, but nothing past so is. Printer window messages remain until I have Cancel.

  I installed the latest HP Web site driver package.

  It seems that the printer has become hung up, most likely in the internal software.

  I would like to reset this printer:
  * Unplug the power from the back of the printer while the power is on
  Disconnect the other end of the power cord from the wall jack directly
  * Wait 30 seconds - 1 minute
  * Plug the unit back to

  Let me know if this becomes the unit upwards and will.

• HP Photosmart C6280: my HP Photosmart C6280 ceased printing and copying. I use a Mac OS 10.10.5

  My HP Photosmart C6280 stopped printing and copying. I use a Mac OS 10.10.5. The printer seems to work, but no ink is on paper with a function.

  I installed a new black ink cartridge and select "black only" with the same results. All the other ink levels are sufficient.

  I would appreciate your help. The printer has been idle for a few days but a previous usage has been a success.

  Welcome to the Forum from HP Support. I hope you're well @Suz161!

  Thank you access the Forums from HP Support for extra support! I see that you are having problems when copying / printing. I will do my best to help you with this problem.

  It looks like a problem with the printer ink. It may have dried due to non-use. I suggest that try you to perform a print head cleaning. Try the following steps:

  • On the printer control panel, press 'Setup '.
  • Press the down arrow button to select Tools and press OK.
  • Press the down arrow button to select "Clean printhead" and press OK.
  • If the print quality is acceptable, you can stop troubleshooting.
  • If the print quality is unacceptable, perform a print head cleaning.

  You can try the steps mentioned additional troubleshooting here: http://hp.care/2dVLZUu

  Let me know how it goes. Nice day!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Printers HP 8500 stopped printing

  I use Mac Book Pro with current OS (10.6.6) software to print wireless. The printer has stopped printing and scanning. (It works well and just started to act up today.) Obviously I did something that caused the problem but I don't know what.)

  It seems to be properly installed. When I send to complete a print job seems to accept the work it shows that 1% then closes in response.

  I tried to completely uninstall the printer and all HP - including the scan software software.  I did a software update from Apple and no update has been found/necessary. Still no printing/scanning.

  Any help will be appreciated. Thank you

  Bob

  Download the latest version of the software for your printer from the "Support & Driver" link at the top of this page.

• Printer HP 5610 stopped printing from Vista

  A printer driver can simply disappear.  I am trying to download one, but I get a message from HP that the computer already has the driver. I don't have the disk.

  * original title - HP 5610 printer stopped printing. Showed the paper jam first, but he was not part. The queue is disabled, but the print driver seems to have disappeared. *

  It is always wise to completely remove a front printer driver
  installation/reinstallation.
  Look here:
  How to clean the printer drivers
  http://members.Shaw.ca/bsanders/CleanPrinterDrivers.htm

  You'll probably successes to install the download of HP after your
  perform the cleaning. Instead of clicking Run, save the driver to your hard drive
  drive.

  --
  Mary

  "Lucylee.<*** email="" address="" is="" removed="" for="" privacy="" ***="">
  wrote in message
  News: * e-mail address is removed from the privacy... *
  > A printer driver can simply disappear. I am trying to download one, but I keep
  > a message from HP that the computer already has the driver. I don't
  > have disk.

  Mary Sauer http://msauer.MVPs.org/

• printer pro 8600 - 2 trays stops printing all nite at 19:00 error not connected printer States

  My pro HP8600 printer has malfunctioned since new right out of the box. HP has been unable to provide the solution. Every evening at 19:00 the printer stop printing and won't return until I restart my PC/laptop. I have a HP 4100 on USB printer that works very well. The 8600 will be fax and copy, but won't scan or print emails or documents. Error state the printer will automatically disengage when it is not. I restarted the printer, but it does not help. All the tests I did on the network IP address of departure etc. PC is running XP

  Okay, I think it's a XP bug that exposes HP software. See the following link for more information:

  http://support.HP.com/us-en/document/c03149924

  Also, even though it is not stated in the article, putting to Vista or 7 would also "resolve" the issue.

• HP Officejet Pro 8600 N911g can't always print and scan after turn on Mac from sleep

  Dear community:

  It's my printer:

  1. number and product name
  

  HP Officejet Pro 8600 N911g product name product model number product CM750A the serial number {private information deleted} ID Service 23022 Firmware Version CLP1CN1150CR Total number of pages 4187

  2 operating system installed (if applicable)
  Mac OS X 10.7.5

  3. error message (if any)
  

  After several problem that prevented me print I uninstalled all the HP software on my Mac OS X 10.7.5 laptop. I downloaded and installed: Officejet-Pro - 8600_v12.23.0.dmg after full I can print and scan. then I go home and put my laptop to sleep. After that I go back to work this morning I cannot print and scan again. HP utility impossible to connect to this printer because all of the information here (all fields) will appear as: unknown please help.

  4. all changes made to your system until the problem occurred
  Nothing. I just put my Mac to sleep and then back on.

  5. in the title of the topic, include a brief and accurate description of the problem and your product information (e.g., product name of your laptop, laptop computer, printer and other device, etc.)
  

  After several problem that prevented me print I uninstalled all the HP software on my Mac OS X 10.7.5 laptop. I downloaded and installed: Officejet-Pro - 8600_v12.23.0.dmg after full I can print and scan. then I go home and put my laptop to sleep. After that I go back to work this morning I cannot print and scan again. HP utility impossible to connect to this printer because all of the information here (all fields) will appear as: unknown please help.

  Is there someone out there who has an idea on how to solve this problem? Thank you in advance.

  Try scanning with picture Capture in your Applications folder.  Click the scanner on the left, click View details in the lower part to reveal a bunch of settings on the right side.

• Epson Artisan 700 printer does not print and gives errors in Windows 7

  I HAVE AN EPSON ARTISAN 700 PRINTER AND IT STOP PRINTING AND ALL THE LIGHTS FLASH AND I GET AN ERROR MESSAGE INDICATING THAT AN ERROR HAS OCCURRED WITH THE PRODUCT.

  * original title - WHY IS ALL LIGHT ARE FLASHING AND the PRINTER WANT PRINT.*

  Hello

  · Did you receive the exact error message?

  · You receive an error with the error code?

  · Do you remember all the recent changes on the computer before the show?

  · You try to print from the internet explore?

  You can run the patch from the link below: why can I not print? : http://windows.microsoft.com/en-US/windows7/Why-cant-I-print

  Alternatively, you can follow the procedure on the manufacturer's Web site. Link for reference: http://er.epson.com:8001 / early

• How Scan photos using the printer and save it in the Gallery of photos from the computer?

  Original title: scan photos

  How can I Scan photos to my printer and place then in my Gallery of photos in my computer?

  Hi Joseph,.

  Please let us know the make and model of the printer you have.

  The method of image digitization and its related settings differs from one printer to another. So, I suggest you consult articles guide you may have received with your printer when you bought. If you are unable to find all the details in the article of guide, it would be best to contact your Technical Support of the printer for assistance on this.

  You can publish all your queries related to Windows on Microsoft Community Forums and we will be happy to help you.

• HP Officejet Pro 8610: hp officejet 8610 printer error "Please stop your printer, and then click.

  When I turn on my HP Officejet Pro 8610 - it goes through its cycle - once it ends the initialization of the startup LCD flashes a Blue Screen of Death with B8931C7C for less than a second, then the screen shows printer error "Please stop your printer, and then click.

  I've tried so far, I've tried it unpluggin at the back, wait 15 seconds and 60 seconds.  Also this operation and in him plugging in several power strips and directly into the wall outlet.

  I was able to restore the default settings at one time.  This questions has gradually deteriorated to the point that wow its very pretty in a loop without end with failure - consistantly crashing after start up - please advise.

  Hi @mrberad,

  Welcome to the Forums of HP Support!

  I understand that your printer HP Officejet Pro 8610 is stuck in an error state. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating, it would be for you. The error you receive is usually related to a general printer error, sometimes leading to a hardware problem.

  I take a flashlight and look inside the obstruction.

  Use this guide to check obstructions:

  • Displays a Message 'Transport Jam'

  I see that you reset the default printer. Have you tried a reset complete semi? I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  If you have completed all the above steps and your product still has a problem, service the product.

  If the printer is buyer's remorse period, you can take that back at the point of sale or contact HP.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!