Stumbled upon a problem

Similar Questions

• I recently got photoshop and stumbled upon a problem

  I just made my first picture and it looks quite clear, but I ran into a problem when I downloaded it on my instagram, it seems very blurry, suggestions on how to make more clear?

  Suggestions: Reduce 1080 px, in file > save as... JPEG quality 10, optimized and try again.

  Additional info, use Image > size of the Image to the reduction, the value auto resampling. Preview box zoom to 100%

  After downloading, at 100%, he discovered other zoom levels it will make look a little fuzzy.

  

• problem encoding with word and pdf doc - error message - file conversion - Select encoding to make your document readable

  Hi, until an hour ago, I had no problem opening documents adobe, or word documents, however, when I try to open a pdf document is opened correctly, I have to save it, and then open with adobe, when I try to open the Word document of display of the error message - file conversion, select the encoding that makes your document readable? help please how to do everything back to normal?  I think I caused the problem when I tried to open a Word / PDF of my removable flash drive, can someone please tell me how to solve this problem, without a questionable download?

  Can I save as and then open with - and pdf opens the file - but before that I didn't have to do it just opened automatically

  Thank you.

  J

  I just stumbled upon this problem there is, it's an easy solution to calm. If it's a .pdf to locate the file right click and select open with, then choose program select by default, choose the adobe reader software. What it does for each .pdf file it will use adobe reader instead of trying to use the wrong program to open the file. Same thing with .doc and .docx files only instead of adobe reader choose microsoft word

• Problem of component snap hinge

  I just stumbled upon the problem of component snap hinge right that everyone has been, I have a HP ENVY 6-1010TU, I've had my laptop for over a year now and this occurred yesterday, I'm more in Australia, can you help me Jeff?

  Stingo98,

  I sent you a private Message to this topic.

  Kind regards

  Eric g

• "VIX is not installed on this computer" problems on 2008R2

  Hi all

  I get the following message is displayed:

  Waiting-tools that the requested operation cannot be performed because the VIX is not installed on this computer. Please install VIX if you want to use this feature.

  The thing is that the VIX is installed, I even reinstalled PowerCLI including VIX (get the warning that will be installed).

  I'm running PowerCLI (PowerGUI) on a Windows 2008 R2 64-bit server.

  Are there more people who stumbled upon this problem and is there a solution to this?

  You can try this client PowerCLI 32-bit on this computer.

  VIX is 32-bit only I'm afraid.

• Problem with preview (with Audio)

  

  first of all, Hi guys im jopps, just got started doing my first project in after affects and ive stumbled upon a problem, as shown in this screenshot I can't find my movie make in preview ram in its entirety will stop at this same point each time, but in normal preview with sound fine. It worked until I started trying to make the next part of the film wheather not safe I changed something, but I don't think I did. has anyone else had this problem?

  First of all, what do you mean by "normal Preview"? For me (and AE users I know) Preview, RAM IS the normal preview. If you mean that the space bar, I never use it and I don't know anyone who does.

  FAQ: Why preview RAM only play in my composition?

  FAQ: How to play or listen to his (audio)?

  In fact, all the FAQ may be useful for you.

  Since you are a beginner in AE, I suggest you Start here.

  If you want something a little more in depth, for only the price of a new video game there is this wonderful resource.

• Bootcamp Windows 10 question

  Hi all

  Stumbled upon a problem, try to install Windows 10 an end 2014 27' iMac w/retina education runs Yosemite 10.10.5. Bootcamp is V 5.1.4. 32 GB, 3.5 ghz Intel I5. Disk of 1 TB of Fusion. Before you try this, I read the guide of Bootcamp to install windows, but also a number of other tutorials and forum messages about potential problems. This research, I learned that for EDU edition you must change the name of the file from Win10_1607_Education_English_x64.iso to Win10_1607_English_x64.iso. Apparently to have the former name of the file may cause OS X to not recognize the ISO. That fact I started Bootcamp, waited while the software downloaded and created a bootable USB key and partitioned my drive giving Windows 70 GB of space. After that, I got the message that my computer is restarts. Upon restarting, I got the black screen with the blue Windows logo and a spinning loading animation. After a few minutes, a blue screen with a message "Windows has encountered and error with computer and must restart," or something similar. He was pretty quick, so maybe it's not word for Word, but it was not a helpful post in terms of saying something specific. When the computer reboots, I am sent directly to OS X, though a bit slower than normal. I tried to restart with the flash drive to see if the installer would start up, no dice. Try now the Option key at startup, the flash player is not available. Went into my settings to see if I could change my startup on Win disk install USB, no luck it no more.

  Now for the question: How can I get the Windows installation again? What I have to start the process, and if so, what should I use Bootcamp to delete the partition that was created? I have re-run Bootcamp and the only option that is checked is the partition and start and install/uninstall windows and delete the partition.

  Thanks for the help.

  Perform the following two procedures

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  If you use a USB drive, not a USB flash drive, you will have problems. It is recommended to use a 8-16 GB USB2 flash drive.

  If the installation program is located on a USB Flash drive, stop your Mac, connect the USB key, restart and hold down the alt/option key and select the Windows icon in the USB port. This installs Windows in BIOS mode. If you click the start EFI icon, it will install using the EFI mode (faster). You may need to change the partition from MBR to GPT using GPT Fdisk.

• FCPX is cut my short final project some images when I export.

  I have been editing on FCPX for a few years now and only stumbled upon this problem, this last month. I work with six and one half second publishes short and share on my iTunes movies at home. Every time I share the video or export it, even by other means, FCPX will cut my project a few frames. It becomes extremely irritating because the videos loop, or the last clip can be held until the end I tried several ways to solve this problem. Like the confection to change deliberately any longer so that FCPX it shortens the length I wanted initially it. But in every way that I do this, it just stripes as he did before and then adds the images of the remains. I also have this looked and tried different ways to export. It simply doesn't get it. I hope someone has an idea and can help me!

  I work with: Final Cut Pro version 10.2.2

  My computer is running: OS X Yosemite version 10.10.4

  Thank you!! BTW, I'm a 14 year girl, who does not many peers as edit, so I'm a little stuck...

  A screenshot of your Timeline would help.  Make sure that you have nothing selected in the pane calendar before exporting it.  Are you a master file when exporting?  What are the settings?

• A60 w/Vista64 and loss of network connection 4 GB... (unsolveable)

  Hello

  Don't know if someone else have stumbled upon this problem, or know any quick fix for it. One of my desktop at work, an A60 - 8991 - 36G, is used as a testbed Vista64 and to get the most out of this system, we wanted to up the memory and got chips of memory 2 GB and installed... When running with the chips of memory 2 x 2 GB Gigabit network card stops working, run it with 1 x 2 GB or 1 x 2 + 1 x 1 GB and it will work perfectly.

  When running with 4 GB the BIOS of the system of reports / Vista64bit reports 4 GB and 3 GB. Installing the latest version of the bios (2NKT31A), and Vista works with the latest version of windows update fixes and all the drivers have been udpated.

  Lenovo/IBM has forgotten to upgrade their BIOS to support 64-bit addressing and memory allocations? Or the system simply is not 100% compatible with Vista 64-bit or 4 GB memory inserted?

  -Arnvid-

  Just talked to Lenovo/IBM Global Services and their response was... «Buy a new motherboard, this model supports only 3.2 GB of memory»

  So end of line... no point running with Vista64bit on this computer amd64

• behavior strange battery hp probook 4520 s

  I've had my laptop HP 4520 s second handed but I know the previous owner very well so I trust and I bought the probook but since I stumbled upon some problems, especially with the battery that was replaced (I can verify this with HP support assistant) but the battery was a werid behavior, first of al windows never gave me the low battery will appear in the lower right of the screen , but since a couple of days the icon at the bottom right of my screen usually gives a reading about 30-40% and my laptop Cup, goes into standby mode and then turns back on and windows asks you to log on my account, at this point the battery is at 0% and that it charges to what I think a normal rate Please someone help me how to solve this problem? (test battery option is not available in the diagnostics menu which can be accessed by pressing ESC at startup)

  ThijsV wrote:

  I've had my laptop HP 4520 s second handed but I know the previous owner very well so I trust and I bought the probook but since I stumbled upon some problems, especially with the battery that was replaced (I can verify this with HP support assistant) but the battery was a werid behavior, first of al windows never gave me the low battery will appear in the lower right of the screen , but since a couple of days the icon at the bottom right of my screen usually gives a reading about 30-40% and my laptop Cup, goes into standby mode and then turns back on and windows asks you to log on my account, at this point the battery is at 0% and that it charges to what I think a normal rate Please someone help me how to solve this problem? (test battery option is not available in the diagnostics menu which can be accessed by pressing ESC at startup)

  Hello

  Use a third-party software testing such as:

  http://www.Softpedia.com/get/system/OS-enhancements/battery-Eater-Pro.shtml

  4 out of 5 stars seems good.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4145198&swItem=ob-112229-1&prodNameId=4145326&swEnvOID=4058&swLang=13&taskId=135&mode=5

  BIOS improvements: resolves an issue where the laptop battery is not working properly at the end of life.

  This battery may be new, but it does not mean that it is in excellent condition. I suggest to upgade of the BIOS to version F.21.

• How to upgrade my IDT sound card driver? HP Pavilion DV7 4032EO

  Dear HP forum!

  I recently stumbled upon a problem between my card its IDT and my Punkbuster (anti-cheat program) driver.

  so when they collide he causes gel HARD witch requires a manual stop or reset.

  the sound card driver IDT on the HP support site is so, so, so much, old!

  PLEASE HELP ME!

  my device: HP Pavilion DV7 4032EO.

  My driver_id: HDAUDIO\FUNC_01 & VEN_111D & DEV_7605 & SUBSYS_103C149C & REV_1004

  my 2nd driver_id: HDAUDIO\FUNC_01 & VEN_111D & DEV_7605 & SUBSYS_103C149C

  Kind regards

  Magnus Peter Lassen

  Sorry for my English rubbish!

  Hello

  I know that users can update the Nvidia drivers for the video card, but a lot of trouble to update the drivers ATI. The machines won't just updates.

  Kind regards.

• 6 ESXi and broadcom/qlogic 57800 errors in vmkernel.log

  The construction of a new host for ESXi 6. With the help of Dell custom ISO and then put to date with the latest patch. Have card 57800 2x10GB and broadcom 2x1GB (now qlogic). Firmware is the last 7.12.whatever and driver in vmware also seems to be later.

  In my vmkernel.log, I see the following messages every 2 minutes

  (2015 06-24 T 17: 08:47.788Z cpu0:33368)<6>host11: fip: host11: FIP VLAN ID no. Retry discovery VLAN.
  (2015 06-24 T 17: 08:47.788Z cpu0:33368)<6>host11: fip: fcoe_ctlr_vlan_request() is
  (2015 06-24 T 17: 08:49.790Z cpu31:33363)<6>host11: fip: host11: FIP VLAN ID no. Retry discovery VLAN.
  (2015 06-24 T 17: 08:49.790Z cpu31:33363)<6>host11: fip: fcoe_ctlr_vlan_request() is

  I found this article:

  http: //kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2120523

  but do not know how this applies.

  A 10gig links is used and also features offline in the vCenter. The other is showing that the unknown (it is not connected). I do not use FCoE and another r.620 with the old firmware but sam card and ESXi does not FCoE adapters.

  It is a bug? Is there somehow circumvents these garbage problem of FCoE filling the newspaper? Anyone see this before?

  The problem has been resolved. It is caused by the installed by the broadcom/qlogic driver startup script.

  As long as you do not use FCoE, you can remedy by you connecting to your ESXi host and running orders following, then reboot:

  software esxcli vib remove scsi - n-bnx2fc

  CD /etc/rc.local.d/

  RM 99bnx2fc.sh

  esxcli fcoe nic disable - n = vmnic0

  esxcli fcoe nic disable - n = vmnic1

  Depending on your configuration, adjust vmnic # according to your needs. I 2x10g and 2x1gig on my card but only had to do this on the ports 2x10g (vmnic0 and 1)

  If you try to disable the driver - instead of removing - and then remove the .sh file .sh file gets restored the next time you start to really remove the vib.

  Watch for patches that can reinstall the driver. This change can be found in the notes of the bnx2fc driver version. From 1.710.70.v version [50,55].2, this "feature" will be present.

  Dell helped me to find the solution for now, but there is at least another guy who stumbled upon this problem and posted the solution: www.davisphotoworks.com/.../broadcom-bcm57810-fcoe-and-esxi

• X 200 wireless WAN &amp; Lan

  Hello

  I just got my new X 200 last Friday I'm absolutely in love with so far. I just stumbled upon a problem with my installed WWAN card. I can't make it work.

  Just material won't if initialize, which is when I go to 'ThinVantage Mobile Broadband Connect', it shows me the error message «no wide devices found wireless broadband» If I open "Fn + F5", I see the WWAN card, but I can not power. I went so far to reinstall the driver and even crack open the unit to see if she was physically present. I am aware to a sim card for the WWAN card work. I even put in a 2nd sim card of my German provider. ThinkVantage GPS shows me the error «Failed to initialize port GPS COM.»  (309).

  So what do this? Phone support told me that I need to have a map of acctivated AT & T. This will not be an option but as I do not have a SSN. Besides, I'm sure I read somewhere that at least the GPS should work with any SIM card, right?

  Second of all, when I cracked open my device, I noticed that the Intel WiFi Link 5300 card was just to connect to 2 antennas. A little, I bought this card to have faster speeds and perhaps have better reception because of the multiple antennas against the 5100. Now, I'm afraid that I won't be able to use benefits due to the antenna of 3rd missing?

  Thank you!

  P.s.: The card WWAN an EricssonF3507g.

  
  

• MCC and MNC network info tour

  Hello

  I stumbled upon a problem mcc weird & MNC anything other than they should be.

  I am located in Finland and running one unlocked Vodafone brand device. For some reason, the MCC I get is '580' that does not match any country. Anyone know if this is something that must be mapped to real CCM somehow, or is it just something wrong with the app?

  580 is a conversion, decimal number to hexadecimal. 580 d = 244 h, i.e. of Finland!

• Partition to opt on fabric interconnect an includes file system errors

  After a downgrade from painful recovery (failed upgrade from 2.2.3d to 2.2.6d) everything works again, but I see

  Partition to opt on fabric interconnect an includes file system errors (see attachment)
  

  To remedy this unpleasant error advice are appreciated.

  Hello Walter.

  The bug that you run is;

  https://Tools.Cisco.com/bugsearch/bug/CSCus79160/?reffering_site=dumpcr

  I stumbled upon this problem in the past, the TAC will load the debugging plugin and just check a few blocks. Anika, a system launch is another fix but it is a longer process, if you open a TAC case don't forget to mention the bug above and they can try this work around first.

  I would like to know if you have any other questions or need help.

  Qiese Sa'di