Subscribe to delayed

Similar Questions

• play music instead of silence on the default script

  I'm trying to configure the IPCC Express

  If Agents are busy or not ready, default script from the IPCC plays the welcome message then the time of silence then greeting and so on...

  I want to replace the time of silence by music file

  How can I do this? How can I change the default script to read the message file then music of greeting and so on?

  Concerning

  Mohamed

  You can subscribe to delay DelayWhileQueue dry stage and insert another stage of PlayPrompt which will refer to your music .wav file.

  I hope this helps.

  Brandon

• Delay of Subscriber notification followed Winlogon 0x800705b4 after installing MS Office 2010

  My PC Windows 7 Professional x 64 now takes a long time to start. I see a screen "Configuring Updates" which remains at 0%, followed by "failed to configure.

  The logs show a second delay 300 as follows:

  -L' subscribed to winlogon notifications took 300 second (s) to handle the notification event (CreateSession).

  So my updates pending show as follows:

  -Installation failure: Windows failed to install the following update with error 0x800705b4: update to the list of compatibility view Internet Explorer 8 for Windows 7 for x 64-based systems (KB2447568).

  Even for updates KB2284742, KB2388210, andKB2249857

  This started happening when I installed Microsoft Office 2010 (download HUP).

  Suggestions?

  Error_Timeout 0x800705B4

  From: you can encounter errors related to the connection of temporary when you use Windows Update or Microsoft Update to install updates

  First see if there is a proxy server used by the security software installed by following the steps for Windows 7 Sub
  Method tip B: remove the entry from the WinHTTP proxy configuration proxy server.

  Netsh winhttp show proxy from a command prompt displays Direct access , type exit and then press enter at the command prompt to close.
  Otherwise type netsh winhttp reset proxy , and then press ENTER to remove the proxy, then type exit, press ENTER to close the command prompt.

  If a proxy server is not the question...

  We use a 3rd party firewall? If the answer is Yes, then suggest you set up boot system, restart the system and make sure that the native firewall of Windows 7 is now on by opening the Windows Firewall in Control Panel (click on the view by: link and set it to small icons to be able to access the Windows Firewall), then see if the updates install now.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If the updates install or not, Cancel now clean boot configuration and restart the system once more.

  If updates are always not to install please copy & paste the last lines of 50 or more WindowsUpdate.log in your response.
  How to read the Windowsupdate.log file

  Expert MowGreen Windows IT Pro - consumer safety

• Stream Podcast shows of new episodes, but feed validators and subscribed itunes do not update

  Hello everyone, I ran a rather strange problem this morning during the release of my latest podcast episode.  When I publish a new episode, it appears in the flow, but it will not appear in itunes.  I know that there is a delay for the itunes store to show the episode but the episode shows when I check with a subscribed podcast app.

  Here is my podcast on itunes:

  https://iTunes.Apple.com/us/podcast/Church-collective-worship/id672308308?MT=2

  The last episode is in the RSS feed and as far as I know, everything looks ok:

  http://thechurchcollective.com/Podcast-RSS

  But when I look at the flow through a feed validator, it won't show the most recent episode of today.

  While trying to figure out what might be the problem, I tried to put the audio from today in last week's episode (108) and when I go there to play, he continued to play audio from last week even though the RSS feed shows that I put another file in the enclosure.  If for any reason, the stream no is not updated even if it is actually updated.

  Thanks in advance for your help, I've learned a lot already just looking through this community.

  The store, by subscribing in iTunes and the stream itself illustrated all episode 108 as the last and at the reading of the episode in iTunes that it promises to be 108.

  Your web page to the http://thechurchcollective.com shows an episode (number 14), dated today. It has a built-in Soundcloud player, which seems not to be the case with episode 108, and such a player will not work in iTunes (if it's probably why Wordpress is not placed in the flow).

• MWI delayed power on and off between 5 and 40 minutes

  Unity 4.0.2 unified exchange 2000 tsp 7.02 call Manager 3.3 single does site no cluster

  Hi, I have incorporated the above but got 1 problem of stuborn. the mwi on and off voltage indication are delayed by between 5 and 40 minutes, this problem is related to all users. the problem is internal and external calls. I had this problem of troubleshooting for several days. tests indicate that the message does not appear in the unityMTA but takes about 1 minute to appear in the outlook-box users, when I do a refresh on the light lamps work properly. There is no error on the area of the unit or the gc/dc boxes or e2k clients, but several positions designed, it may be DNS. I tried to add files hosts with no joy. basically is there any way that I can retry the record to know what is happening, or is it possible to force a lamp after so many seconds as a work-around. Thank you. Jim.

  I wonder if the Exchange is slow to tell us...

  In the directory \CommServer\TechTools there is a tool called MBXSuite.exe. Once you open MBXSuite.exe select the mailbox you want to monitor. Choose the account that runs the AvMsgStoreMonitorSvr as for RunAs. Click Notifications, and then click mailbox to logon.

  Once it's done leave a new message to the Subscriber. How long does it take to see you

  Notification received

  TABLE_ROW_MODIFIED

  ?

  Thank you

  Keith

• How can I delay send SMS in IOS10.0.2?

  How can I delay the sending of SMS in IOS 10.0.2?

  Don't hit the Send button until you are ready to send it...

• Toggle Subscribe auto is no longer available.

  I am trying to stop these two applications of auto-abonnement and this option is not yet available more in subscription management options. What has changed and how do I unsubscribe?

  When signing into your account details with the iTunes on your Mac app, you do not find these two applications figure among subscriptions? Are you sure that you subscribed to these applications by Apple?

  Are BTW, you referring to the Mac apps or iOS apps?

  By the end of 2012 Mac minis, macOS?  Watch 38 mm silver AL, watchOS 3; iPad 2 Air & iPhone 6 + iOS 10.0.1;  Apple Airport Express

• How can I work around subscribing to music Apple MacBook?

  Ive updated my itunes and I get this popup to subscribe to the Apple's music which I don't want. because of this I cannot preview any track on itunes. a way around this?

  Try this: go to preferences, then Restrictions and check the box to Apple's music.

  

• Possible to delay the login items?

  Implementation of Adobe to open the connection software has created more problems than it is worth. I use Photoshop, Bridge, first and every day hearing as part of the same project, all related. I thought I would put them in place to open the connection, to save time.

  However, the location of the Cache for all download and also the folder for my Google Backup Drive, on an external drive, and if it is not present when the software tries to open, things go haywire.

  Is it possible to delay the opening of the connection points, by, say, 10 seconds?

  No, it's on or off only, there may be a 3rd party app that can do it, but you will need to check the app store.

• very long delay before printing

  My MacBook Pro is around the age of 18 months. It is updated at El Capitan.

  Maybe a week or two ago, my printer stopped printing normally. I bought the printer at the same time as the Mac. It's a HP Officejet 8610. It is connected with a time capsule wireless newish.

  When I select print, a normal icon on the dock. Opening it displays a message to printer, printer not connected. I fought with him for half an hour or more, then give up in disgust and head to do other things. When I return to my office, there is the impression.

  I deleted the printer in system preferences, then reinstalled. I have reset the airport utility. I turned the printer on and outside.

  I believe the delay between the choice of printing and when the printer starts his work about half an hour.

  Open system preferences > printers and Scanners and then select the print tab then check or right on the printer on the left then click: reset the printing system

  Then try to print.

• There is Airfoil and Airport Express, latency/delay time?

  I want to be able to direct the output of my iMac "end 2014' 5K (10.11.6) on my stereo system (ParaSound P3/A23) using AirFoil 5 with Airport Extreme > Airport Express."

  But the audio output should be "real time." in other words, no delay or latency at all. Both are in the same room!

  I use notation software (Sibelius) and need to hear what I write immediately. Unlike streaming where I think there is an acceptable delay (2 seconds?) for the buffering?

  Is this possible please?

  If it isn't with AirFoil, any advice on how welcome :-)

  I want to be able to direct the output of my iMac "end 2014' 5K (10.11.6) on my stereo system (ParaSound P3/A23) using AirFoil 5 with Airport Extreme > Airport Express."

  With AirPlay (or Bluetooth), there will always be a form of delay or latency with streaming audio.

  In this scenario, an audio stream (on AirPlay) will go first to your iMac to AirPort Extreme and AirPort Express Terminal.

  To help understand why there will be delays, let's look at high-level "behind the scenes" about how works AirPlay:

  For the AirPort Express (AX), audio input is provided mainly by iTunes. Of course, it can also get feedback from other sources as you know, as of Rogue Amoeba's Airfoil.

  For streaming, iTunes or wing does most of the work. What is app reads audio content standard (AAC, MP3, audio books, Internet music streams, etc., it decompresses these file formats and creates what is essentially a raw, uncompressed audio stream.) This stream is compressed using Lossless Compression of Apple (via a QuickTime codec), encrypted with AES 128 bits and then listened (airplay) with an AXE. The stream is buffered for about 2 seconds until the stream is sent. The AX deciphers the flow, decodes and exports in a digital or analog PCM (using a built-in DAC) flows to its audio analog-to-digital versatile optical port.

  So, with the above, you can see that the tone does not simply move source to the destination without much more things. You will not be able to entirely eliminate the delay. Sorry!

• How can I subscribe to Match iTunes using my current credit?

  How to subscribe to iTunes game using only my current account balance?

  Hello

  Read this subscribe to iTunes game - Apple Support

  Jim

• Office 2013 on Win7 using bootcamp has delay time

  I use Win 7 teacher on a piece of Macbook Air 2014 with bootcamp 5 and MS Office 2013. Up to 4 weeks everything works well, and the performance was great. And then I got the delay time:

  -Closing remarks is the longest in about 4-5 sec

  -editig one Excel cell and switch to another will cost about 4 to 5 sec

  - and so on

  Thanks to this performance, it is horrible to work. I have also removed Office and install it again without any result.

  Anyone have some advice for me? Is there some patches in which software never cause this?

  Or am I alone with this?

  THX in advance

  Frank

  Your is no longer in a Mac environment, if this side of "windows" because you're not virtualize, you run Windows as a complete solution for Windows. OS X doesn't play not any part of your experience. Windows as OS X should be updated with patches and update securities, the latter is the only support Windows offers for Version 7, it is out of development and was removed by Microsoft for more than a year. All compatibility fixes should come from Microsoft, see microsoft.com for the availability of these.

  Outside the correction and the issues pourraient be caused by:

  Disk fragmentation that is common in windows. (However it is not under OS X, don't defrag on Mac, OS updates will do everything if it you better than anything you can buy)

  hard disk-ragmenting https://support.Microsoft.com/en-us/help/17126/Windows-7-improve-performance-def

  Font management (again, on the side of 'Windows', your OS X fonts do not play in this)

  3rd party Windows applications, such as anti-virus and the litany of bloatware inherent with Windows. Windows has a startup mode for troubleshooting.

  https://support.Microsoft.com/en-us/help/17419/Windows-7-Advanced-startup-option s-safe-mode

  and possibly disk goes wrong, which can be controlled using this method

  https://support.Microsoft.com/en-us/KB/2641432

• IMAP account does not show subfolders subscribed

  I created a structure of folders and subfolders on the side my IMAP e-mail account server. I am able to subscribe to these folders in Thunderbird. However, I see only one level of folders in my interface.

  Example:
  Inbox\Games is displayed, with the mails that are there
  Inbox\Games\Steam does not, even if I am subscribed to it.

  All records are already checked for offline use.

  But in the meantime records appeared. I can't understand how and when it was fixed, but it is. Thank you for all your help.

• Follow-up of applications for security delays

  When you use the private mode on http://www.lensbest.de/ with activated protection of follow-up, most of the requests are delayed by 1 to 2 seconds. Loading animation is not present in this time interval. For example, the links in the menu and in the footer are affected by the problem.
  If I disable the protection followed in the address bar, the delay goes away.

  I found the problem in Firefox 42. Firefox to reset to the default values and creating a new profile didn't help.

  I can do something on the server to resolve this problem?

  h.Klaus said

  When you use the private mode on http://www.lensbest.de/ with activated protection of follow-up, most of the requests are delayed by 1 to 2 seconds. Loading animation is not present in this time interval. For example, the links in the menu and in the footer are affected by the problem.
  If I disable the protection followed in the address bar, the delay goes away.

  I found the problem in Firefox 42. Firefox to reset to the default values and creating a new profile didn't help.

  I can do something on the server to resolve this problem?

  Could be closed. The problem was caused by a Timeout of Google Tag Manager.