system freezes and the screen goes black or watch horiz lines

Similar Questions

• Satellite L405D-11V - freezes and the screen goes black when you watch the video

  OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

  I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

  However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

  Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

  Thank you

  Hey Buddy,

  You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
  What operating system you use on your L405D satellite?

  To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

  In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
  If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

  If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
  Explain your very detailed problem. I think that everything can be clarified then. :)

• I click on "SET UP" on my Motorola XOOM and the screen goes black and does not settle. " I have uninstalled and installed the man times. What to do next?

  Cannot install Firefox Mobile o my Motorola XOOM. I have download and start editing the page and the page become black and back can not be configured.

  By clicking on the "Android Zoom" and select "Stretch to fill screen" and restart the tablet. The "Zoom to fill the screen" breaks Firefox mobile and it's a shame Android this suggests for our application on the first run.

  We are working to solve this with the creation of our Tablet UI.

• I have a TX2000 and the screen goes black when starting up - please help

  Purchased 2008 HP TX2000 Windows Vista 32 bit 2 GB memory

  Laptop trying to load Windows but fails when the lines are moving on the screen - the screen is black or with lines across and the computer is frozen

  We put an adapter on the hard drive, it is difficult to see just looks like it's all a part, you should be able to just pull the part plastic on the pins and that will let you plug your new case, I've experienced the same thing about 3 years ago, it really seems that it's just one piece... It should first come fairly easily, simply pull... Please let me know if it works for you

  Here's a photo I hope this can help, if it please click on accepted solution or glory, but only if I helped.

  

• a sound signal and the screen goes black after start

  Hi, I have a problem with my HP G62 a38se laptop pc.when I start my pc after startup pc saying not to answer with 3 beep sound(beep...beep...beep).after it displays a black screen and goes restart... plsss help me for this

  You are able to access UEFI to perform material tests?

  Perform the start-up and testing of the long system. Please post your results here.

  Kind regards

  ERICO

• Movie Maker problem: music stops and the screen goes black

  Have loaded slides and music for Windows Live Movie Maker and I'm reviewing before creating the movie.  At one point, the music stops playing, but still slides.  If I stop and move the cursor over a photo and continue to play... no music will play and darkens the display great movie on the left.  Pictures always appear on the right.  Any thoughts?

  Maybe it's a compatibility issue with the format of the music file.

  The project plays correctly if you delete the file from music/s?

• Update CC 2014 on the Mavericks. Now, I get the message "your computer restarted due to an error". When I try to reboot, my macbook freaks out and the screen goes black or I get pink and blue pixels. Help!

  I have no idea what to do now. I have a MacBook Pro running OsX 10.9.5

  uninstall all cc, clean by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 and then restart your computer.

  If that solves the problem, install the application of cc, Download Adobe Creative Cloud apps desktop | CC free trial Adobe

  Test your computer again.

  If no problem, install a program of cc using the desktop application.

  Restart your computer.

  If no problems, proceed with the installation of programs cc.

• After I Log In, the screen goes black.

  After that I have enter my password and click on enter, it says welcome with the thing to load next to him. Then that disappears and the screen goes black and all I can see is the pointer. Sometimes the bar on the bottom with start on it, is also displayed. Any suggestions on what to do? It works fine when I run it in safe mode.

  original title: after I Log In, the screen goes black. Help me!!!

  Hi Kooper93,

  You can also try theclean boot to see if this is due to a program/process.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm playing True Crime New York City on windows xp and every time I'm trying to play the screen goes black and then I'm back at my desk.

  Whenever I try to play True Crime New york city for windows XP it is closes its doors after the theatrics start and gives me an error saying the file d3d9.dll has stopped working or the screen goes black and then then I know you left the game back and I'm at my desk again.

  Hello Respect137, welcome.

  It would appear that running DirectX files installed on your system were corrupt. This gives a test:
  1. go to: http://www.microsoft.com/downloads/details.aspx?FamilyID=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en
  2 follow the instructions which is there to install the package to update DirectX
  3. Once installed, restart your computer and try to run the game
  Let us know if this helps,
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  original title: Auto Adjust

  Hello.

  Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.

  Any help would be appreciated... Thank you

  Try this:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• The screen goes black when I click and drag text, use the version on my 18.0.2. Thank you

  I'm entering text in the space of your question and click on a Word to drag it to another location, or if I am writing something in an email on gmail and click on a part of the text to drag it to another part of the text, the screen goes black as soon as I start to drag the text

  -Installing and re - install, it's what makes work - although I've still "hardware... use" unchecked.

• screen saver; have a screen saver password photos. As he passes, the screen goes black and stays black. What can I do?

  have a screen saver password photos.  As he passes, the screen goes black and stays black.  What can I do?

  have a screen saver password photos.  As he passes, the screen goes black and stays black.  What can I do?

  ===============================
  I don't know what is causing this problem but would be
  suspicious, it is related to a corrupted or obsolete
  video driver.

  Might be interesting to try to reduce your graphics
  Hardware acceleration instructions
  in the following article.

  How to put in back of graphics hardware acceleration
  http://www.pptfaq.com/FAQ00129_How_to_set_graphics_hardware_acceleration_back.htm
  (scroll down to: "If you are using Windows 2000 or XP")

  If they improve the question, you should look for the
  site Web of MFG. your video card
  a updated driver Win XP compatible video. Or...
  If your computer is a laptop... Search support
  site of the manufacturer of your computer.

  If you do not know the make and model of your
  Video adapter, see the documentation that
  supplied with the computer.

  Also you can find info on your video by driver
  go to Device Manager: you can launch
  By clicking Device Manager on... Start/run and
  type or copy / paste:
  devmgmt.msc
  And then press ENTER.

  Expand "Graphics cards" and right click
  the name of your graphics... then
  choose... Properties / tab pilot... FYI.

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. In addition, installation
  instructions that should be followed closely
  should be available on the support site.

  Once installed the new video driver... you
  can restore your full acceleration.

  Good luck...

• At the beginning; After the Windows Logo at the start, the screen goes black and a POWER SAVE MODE comes up. I must stop button. I can run the computer as I am now in Mode safe mode with networking.

  When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds.  Then the screen goes black instead of blue and stays black for about 10 seconds.  A 'Power SAVE MODE' appears.  The machine is dead to all orders.  I have to stop by pressing the off button.  I can turn back and the F10 key to get in Mode safe mode with networking.

  I tried to reinstall Windows XP original but it would erase my files.  I tried to restore the last good configuration also knowledge.  That did not work.

  The change came after a Windsows update.  I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start.  Clues?  I use Negear.  No change when I hooked directly either.

  Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do.  What does not load Windows?

  http://wiki.answers.com/Q/How_to_get_out_of_power_save_mode_when_computer_screen_is_black

• When I start my computer I saw a MSI logo and then the screen goes black and Windows does not load.

  original title: HELP ME PLEASE!

  (I am running windows xp) I need help! I tried installin linux ubuntu for netbook 10 on my msi u100, but everything was wrong when my little brother from my FlashDrive from the port, it has been installin linux from. so now when I turn on my computer it will not load windows, it will just have the msi logo and then the screen goes black and it does not load windows xp.

  Netbooks and also most computers these days, do not come with an installation CD. Instead, it has a recovery partition. Assuming that you have not deleted the recovery partition,

  Take a look at this:

  http://randompastime.blogspot.com/2010/02/restoring-MSI-wind-U100-NetBook-to.html

  Hope this helps

  Post back if necessary

  __________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I connect the HDMI cable to my laptop, the screen goes black and I can't lift the office unless I get out the HDMI cable

  When I connect the HDMI cable to my laptop, the screen goes black and I can't lift the office unless I get out the HDMI cable. It happened all of a sudden I used he linked TV to catch-up on TV episodes until last night when it happened out of the blue!
  Can someone please help with this.

  Contact the manufacturer of your laptop.  Also - that there might be a key combination for your laptop that changes the screen from the main output is - look at your documentation or on your keyboard for such a combination of keys (what kind of computer is? Make & model...)