T2135CS satellite recovery disks does not

Similar Questions

• For 1000-zx satellite recovery disk does not work

  XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

  Hello

  Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
  However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
  In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

  Good bye

• C870-121 satellite recovery disk does not work?

  Hello...

  I have a weird problem, I bought the computer 6 months ago and have been happy with it, but I'm protected by a kind of virus and all the operating system has been * ed big time, so yesterday I want to da a factory install with recovery disks that I created when I bought the computer.

  I have the Toshiba system recovery DVDs 4 disc, I insert the sytem disc and look as it should, it loads and then it ask disc of recovery disks, insert disk 1, and after 10 seconds it ejects again and claim a disc again.

  I checked the 5 discs on my other computer and there are data on them and they look good, I tried to insert the discs to see if I'm past them when I printed on them, nothing works, it simply will not recognize disc and I'm stuck? Any help from anyone?

  I'm sure that's not material that are bad, because I had an old windows XP disk, and after that I tried everything, I tried to install on the computer and everything was fine, but I would like to have windows 7 as the computer came with...

  Regards Allan Thomsen

  Hello

  Very strange boyfriend
  Would it be possible that the CD/DVD drive is unable to read the first disc correctly?
  I mean, maybe it's a disk problem and not the problem with the data

  I don't know what's wrong here, but you have some a lot of m options here:
  To recover the laptop, you must use the Toshiba recovery disks or HARD drive recovery
  You can use the HARD drive recovery process?
  Turn on the device, press F8, choose fix my computer-> drive HARD recovery.

  If this is not possible? Well. You can always order a new disc here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite A30 - 203 - recovery disk does not work

  Hi all

  I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

  Thank you

  Hi dimation,

  It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

  In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

• DVD - ROM Toshiba Recovery disk does not start

  Hello

  I'm having some problems with my Toshiba Satellite M40, and I decided to reinstall the OS with the recovery of the dvd disk, but the disk does not start.
  When I'm on windows, the cd/dvd driver works perfectly, and I don't think that the recovery of the dvd disk are damaged.
  I have already tried:
  1. by pressing the "C" key to start the computer
  2 - press "F12".
  3 - Enter the BIOS Setup and select cd-rom to start first

  But the computer starts up normally and no error message appears

  Can someone help me? I don't know what to do

  Thank you

  Hello Palma

  Can you please test it with some other bootable CD or DVD? It will be interesting to know if this happens with the recovery media only or even with other bootable media.

• HP ENVY 17 - 1190nr l 3D: recovery disks does not not for HP Envy 17 - 1190nr

  My main HARD drive died. Toshiba 500 GB MK5056GSY was the 'C' drive factory installed. The laptop also has a "D" drive, which was the same exact brand, model and size.  (secondary HARD disk does not work at all. Long story, but I think it is a driver or a hardware problem with the motherboard)

  I overwhelmed the secondary HDD at the location main, reformatted and reinstalled the operating system with the set of recovery DVD 7, SUCCUSSFULLY disks.  But, since I can't have a second HD to wor, I decided to spend the primary HARD disk capacity, so I installed a Seagate 1 TB HARD drive.  Now, I have reinstalled the operating system using the recovery discs 7 DVD and when the 7th finished disc, a window open warning that says "Recovery manager cannot restore your computer using the original image. "Please contact the HP support (Yes right, it's a joke) error code: 0xe0ef000e.

  I also tried to install the operating system with the recovery of a 240 GB SSD disks. Same question.

  BUT, the original secondary drive allows the operating system recovery 7 DVD image reset goes to work.

  WHY?
  
  Finally, if I install a stand alone Windows 7 OS for the new Seagate 1 TB drive, it works fine.  The problem is that all additional drivers, programs etc. provided with the laptop originally are net, just a light version of Windows 7. The works of the OS, but the wireless, the blueetooth, readers of cards, etc. do not work. And missing a few programs that comes with the original image (some are too expensive to buy when I wouldn't need it again).

  Thanks for any idea on this issue.
  HP makes me very angry today.

  Hi there -@Bob,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your recovery discs do not work on your HP ENVY 17 - 1190nr 3D Edition Notebook PC.

  • What is the model/product of the Seagate 1 TB HARD drive?
  • You can enter the BIOS?
  • Can you see the HARD drive in the BIOS?

  If you can, please:

  • Restore the BIOS
  • Press F9 to change the boot sequence to reflect the new hard drive.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• Recovery disk does not work now I have installed a new hard drive.

  I replaced my hard drive on my laptop HP - computer pavilion dv7 notebook. My recovery disks do not seem to work now, I get to 62% completion and then the error message "Recovery Manager is unable to restore your computer by using the original image. Please contact HP support. "Error code: 0xe0ef000e" do I need to buy a new HP recovery discs? Thanks, Nick

  Hi, Nick:

  Unfortunately, I don't have any experience in troubleshooting these special software installations.

  We should expect to download and install.

  If they are not, I have no tricks up my sleeve for you to try.

  I recommend starting a new thread describing your questions with this software and hope that someone else in the support forum can help you with these items.

  See you soon,.

  Paul

• Satellite L300D-202: restore using recovery disk does not work

  Good afternoon

  Wonder if anyone can shed some light on this error message I get when trying to restore my laptop...

  «Setting permissions V:\HDDRecovery...»
  V:\HDDRecovery the system cannot find the specified file
  Unpack the WinRE...

  L ' ImageX for Windows tool
  Copyright bla...

  Opening the file in error [V:\HDDRecovery\SWImg\06546XSP.svml
  ERROR: ImageX could not apply WinRE V:\HDDRecovery\SWImg\06546XSP.svm index 1 of the HARD drive to W:!

  Press any key to continue... »

  After that, I find myself with the Toshiba Recovery with no action software and a screen BACK Active but nothing happens...

  I'm guessing that lack of HD, received today from Toshiba for this system recovery media

  Laptop is:
  Satellite L300D 202

  NB. If I restart the laptop start date and shows BOOTMGR is missing Ctrl Alt Del to restart...

  Any help appreciated,
  Thanks in advance,

  Rick0684

  > NB. If I restart the laptop start date and shows BOOTMGR is missing Ctrl Alt Del to restart...

  Hmm... for me, it seems that the laptop does not start from the disc (DVD), but it attempts to boot from the HARD drive...

  In any case, have you tried to boot from another disk; for example, Win XP, Linux Live CD?
  To do this, and check if it is possible... If Yes, format the HARD drive and try to boot from the recovery again disc!

  PS: Have you tried a HARD drive recovery option?
  Turn on the unit, press F8 and choose fix my computer
  After that, select Toshiba HDD recovery option if possible.

• Satellite C650 - error reading disk and the recovery disk does not work

  Hello

  I have a toshiba Satellite C650, who has recently developed with a disc read error. I want to access the command prompt to try some possible solutions I've read on the internet.

  I made a Windows 7 recovery disk using my other acer laptop which has also installed Windows 7 64-bit. When I use the recovery disk and it loaded the files etc it evokes just a black screen and the cursor.

  Does anyone have any ideas as to why this is happening?
  I tried to start my computer acer laptop from the recovery disk and it worked fine.

  As is - this does anyone have suggestions as to why I get the message "disk read error - press ctrl, alt and delete to restart?

  Any help would be appreciated, thanks.

  On this virtual path, it is not easy to offer the exact diagnosis, but of course, there must be a problem with the HARD drive. Can you get a second one for test purposes and exchange it. Just to be sure if the HDD is troublemaker.

  But there is something else:
  > I made a Windows 7 recovery disk using my other computer acer laptop...
  Sorry, but I don t understand this. Can you please explain what you did exactly?

• Recovery disk does not work on Satellite Pro P10-304

  A few days ago my Satellite P10-304 is not start, so I used recovery CD and got the machine works like new.
  Yesterday it wouldn't boot.
  Some thing on an ethernet cable unplugged error message, so I tried recovery CD because there is no data to lose.
  It won't work, to come up with an error message "GDISK (E) no such fixed disk - 1" then "error number 11030, invalid destination drive.

  Can anyone help me to get it booted/recovered please?
  I'm not fussed on something special for this old laptop, just a second computer for the kids to do their homework on.

  Hmm. sounds like a HARD drive failure
  Have you checked if the HARD drive has been recognized in the BIOS?

  > Something on an Ethernet cable unplugged error message.
  I guess you get an error PXE - E61 starting at startup.
  This message appears if the laptop tries to boot from LAN.

  This could happen if there are no other sources of boot as HARD drive, etc.

• Satellite L350-170 - recovery disk does not work

  Hello

  I have a L350-170 running Windows Vista home, I recently buy a Toshiba restore CD and now that it's happened, it does not work.

  I put in the CD and boot from the CD drive, I can hear work and the display shows "Windows loading files" and a bar appears at the bottom of the screen, after that, the screen turns white and all I'm left with is a pointer of the mouse and a black screen.

  Thank you
  Jackie

  Hello

  Have you tested if the laptop would start using another bootable Linux Live CD, WinPE or Win XP disc?
  Please check that would help determine if the problem is related to the computer laptop or recovery disk.

  Please also check if the HARD drive is ok. For this test, you can use a test called Drive Fitness Test free HARD drive tool. Google for it.

  However, it could also be a defective recovery disc and in this case, you should get in touch with the guys where you ordered this drive may be you need a replacement.

• Recovery disks does not not for the Satellite L350

  I have a Toshiba Satellite L350, I bought a few years ago

  Originally it was a laptop Vista Home premium and I opted for the Toshiba windows 7 upgrade and its been pretty much without problem.

  But recently something went a bit weird and things were not only works well (he would not always disconnect you and never seemed to stop correctly) and various other applications does not work properly.

  After a few uninstalls, reinstall, scans and patches from Microsoft has done nothing that I decided to take the plunge and use the recovery disc.

  I bought a Toshiba when I am the machine initially and had made one myself, before you upgrade windows 7 and a new after.
  I still have the windows 7 upgrade DVD so I can apply after if I had to start back on vista.

  The only other big change has had an upgrade of RAM 4 GB - I still the original of the RAM, if I need it, but before that there is no hardware problem not reported and chkdsk was also very good.
  So for me it was the o/s that was the problem.

  I tried now all recovery discs and they all have the same problem of reports that imagex cannot decompress the second frame of the file because it is corrupted to block 90 I n t have this real message at your fingertips
  but can be updated later.

  I can t see that I m something wrong, like everything I do is to put the dvd in the drive and reboot the laptop with the F12 key to boot from the recovery DVD and follow the screen controls on.
  You use reports from such that previously or I am doing something stupid?

  Thank you

  It's very strange that al recovery discs show the same error message. As far as I know when you start recovery image installation that the HARD drive will be formatted, new partitions created, recovery image copied to the second partition of HARD drive and as the last step is the installation of recovery image.
  > I bought a Toshiba when I am the machine initially and had made one myself before the upgrade to windows 7...
  Have you tested the two of them in the past?

  In General, all you do is right. In my opinion, the problem may be recovery image itself or perhaps HDD has some defect in certain areas.
  If you can get the second HARD drive somewhere Exchange it, value default BIOS settings and test the installation of recovery again.

• Satellite C50-A-19 t - recovery disks does not

  I have a laptop Toshiba Satellite C50-A-19 t with windows OS 8.1

  Recently, my laptop had start-up problems so I contacted toshiba support and they told me to get the backupmedia.toshiba.eu recovery disk and I ordered the drive and it arrived today.

  When I get back the recovery disc and boot from the hard drive (ODD) it brings the windows logo then after a minute, it goes to a white screen and I waited and after a while, he was still a white screen
  I had already been in the BIOS settings to boot from the CD but even after that the same problem persists

  Help, please

  Hello

  Go to the BIOS and disable the option called: secure boot
  Now you should be able to boot from the STRANGE.

  By the way: Please check if the HARD drive is listed on the first page of BIOS (name, size, etc.)
  Where the details of the HARD disk are not visible, drive HARD isn't recognized by the BIOS could be linked to a malfunction of the HARD drive.

• Satellite C670D - 11K - Toshiba recovery disks does not work

  I tried to recover the Satellite C670D - 11K using new factory system recovery disks provided by Toshiba. Both drives do their thing until the end when I get these messages:

  Files\mcafee\virusscan/dat\000.0\avvscan.dot c/program Error (error = 1117)
  Error restoring image
  request could not be performed due to the i/o device error
  Error image x could not apply for win 7 V:\\HDDRecovery\SWIMG\15434XSP. Water rain Index 2 in c HARD drive management

  Only option after this point is to press a button any and I get the white screen Toshiba

  When I turn on the laptop I get message "boot mgr is missing." I tried the disc of recovery a couple of times since and things don't get any better. In fact I just get a black screen with cursor after

  Suggestions this is appreciated please? I was thinking of buying the recovery disks would be a solution simple but should I give in and go to a professional now?

  Thanks, Paul

  I assume you are using recovery discs that you created using Toshiba recovery disc creator tool, right?
  It seems silly now, but something went wrong and I m afraid recovery disks are now useless. It turns out that you can't change anything or force the cell to the recovery image installs successfully.

  The only thing you can try is - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm
  I don't think this will help, but you can test it in any case.

  Now, you have two options:
  -for the restore disc original order from Toshiba
  -install the clean version of the OS by using the Microsoft installation disc

• For Satellite 5200 recovery disk does not work

  Hello

  I try to use the recovery for Satellite 5200 disk but it won't work. I have the recovery disk in the DVD player and I tried holding C and also tried to change the boot sequence by pressing F12 at startup to the top but he's not in it.

  Someone at - it ideas?

  Is there a problem with the drive while the OS is running? Try to use different bootable CD and see exactly what is happening.