T520 flexible workstation: HP Device Manager & HP connection manager

Similar Questions

• A Wi - Fi (Wireless LAN) connection is disabled in Device Manager

  The laptop is HP Pavilion G4 running Windows 7 Ultimate (64 bit).

  I just re - install my laptop Windows 7 Home Premium (64-bit) for Windows 7 Ultimate (64 bit).

  But I just realized that there is no "HP Connection Manager", so I downloaded it from the internet.

  When I turned on the wifi of "HP Connection Manager", he says "Wi - Fi (Wireless LAN) is disabled by the Device Manager".

  What should I do next?

  Thank you!

  Hello:

  You will probably need to install the driver for the wireless card there.

  If you see a device network controller listed in the Manager of devices, then you certainly need to install the driver for the wireless card model that your laptop uses wireless.

• AFD missing from Device Manager - no network connectivity

  We have a customer with a virus.  Once removed, we noticed that the network connection is always "obtain an ip address.  Find DHCP cannot start because AFD does not.  We cannot start AFD due to no devices being present.  There is no AFD in under non plug-and-play drivers Device Manager.  In HKLM, there are appropriate under the currentcontrolset\services key entries.    The afd.sys file is there and has even been replaced by a good.  How you can AFD add back to the Device Manager.

  If the AFD is missing from Device Manager, view, show hidden devices you can add.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines in bold text in the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AFD]
  "DisplayName" ="AFD".
  "Description"="AFD Networking Support Environment.
  "Group"="TDI".
  'ImagePath"="\\SystemRoot\\System32\\drivers\\afd.sys '.
  "Start" = DWORD: 00000001
  "Type" = DWORD: 00000001
  "ErrorControl" = DWORD: 00000001

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AFD\Parameters]

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AFD\Security]
  "Security" = hex: 01, 00, 14, 80, 90, 00, 00, 00, 9 c, 00, 00, 00, 14, 00, 00, 00, 30, 00, 00, 00, 02,------.
  00, 1 c, 00, 01, 00, 00, 00, 02, 80, 14, 00, ff, 01, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 01, 00, 00,------.
  00,00,02,00,60,00,04,00,00,00,00,00,14,00, fd, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00,------.
  05,12,00,00,00,00,00,18,00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00,------.
  20,02,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 0, 00, 00, 00, 00,------.
  00,18,00, fd, 01, 02, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00, 23, 02, 00, 00, 01, 01,
  00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AFD\Enum]
  "0" = "Root\\LEGACY_AFD\\0000."
  "Count" = DWORD: 00000001
  "NextInstance" = DWORD: 00000001

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  fixafd.reg

  After you save the file, close Notepad.

  Locate the file fixafd.reg on your desktop and double-click it.

  Alternatively, you can right-click on the fixafd.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the fixafd.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem).

• I can't connect to the network using the Wi - Fi connection. In addition, the Device Manager is empty.

  Device Manager is empty and I can't make wireless connections more

  If Device Manager is empty, check article to see if it will be useful.

  Article number: 311504 - no items appear in the Device Manager list when you open
  http://support.Microsoft.com/kb/311504
  
  Perhaps because the service Plug-and-Play is turned off (disabled).

  Please reply back and let us know if that is the case.

  Thank you

• Yellow triangle with! the wireless network connection in the task bar icon, but ok in Device Manager

  I still need help: 11-24-10' uncorrected problem after all

  I have a laptop of refurbished HP older Pavilion ze5385US who has recently lost the wireless connection.  Now, I have to leave it plugged in to use, not practical at all.  I did the right click on the icon to open the network connections, left clicked wireless network connections and then clicked "repair this connection.  The uninstaslled of the computer, and then was not able to reinstall.  When I checked D, it was empty.  I thought it was where restoration stuff should have been.  So I downloaded and reinstalled much Express IEEE 802.11 PCI card Lan, until I found the one that the computer would be except.  Now, it appears in device very good Manager, but has theyellow cone with! on the icon in the status bar at the bottom.  When I raised it lights, it is said: 13 of (ANY) wireless network connection, speed: 11.0 Mbps, Signal strength: Excellent, status: limited or no connectivity.  When I choose "View available wireless networks", I get "Windows cannot configure this wireless connection.  Under network without wire/support/details of connections, Iget physical address: 00-02-8A-92-BE-0C, IP address: 169.254.196.112 subnet mask: 255.255.0.0, then the default gateway, DNS server, WINS server & have not enumerated values. I'm afraid to hit the repair again, it could wipe out the only map I've found so far that is accepted by my computer.  When I try to enter the knowledge base for WinXP, I get an error for this page, as well as several other help pages I tried the site of microsoft.com for help.  When I used configurationtool thewireless zero in respect of services & restart earlier, I had a red X on my icon, so I guess I've lost my card after all.  Can I disable this?  The map always shows as OK in Device Manager.  Any ideas anyone?  I need help here please.

  Hello

  I thank you and wish you the same.

  I see that your problem has been solved using the HP driver that you mentioned on Thursday, November 18 in your message and the Express.sys is a problem with Windows install.

  I suggest to install the version of Windows install 4.5 on the system from the link below and then update the driver from the link that was attached to your question before and check.

   

  Step 1:

  Install windows install 4.5

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 2:

  Update the driver from the link you mentioned in your previous post.

  I suggest you to check with TP-link if this model is compatible with Windows XP or not.

  http://www.TP-link.com/products/ProductList.asp?class=WLAN#S6

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Unable to connect to Device Manager

  I just bought this Clip + 4 GB yesterday for my upcoming birthday, I connect the device to the computer and my device manager will only read my Clip + not at all. I mean not even a usb detection or whatever it is. I downloaded the firmware and put the unit in and it says please plug in device player. I looked in the device via a right-click Manager and selecting manage desktop and which does nothing, it displays the listed device, but how come it does not appear as being read by my OS. IM using Win XP SP2. I have not the slighest clue what Im doing, I spent all morning trying to read messages from the forum for help and couldn't get a direct output to get an idea of what I'm doing. When I plug the device on my computer using the USB of the msg on the screen says 'writing '. Unlike my USB key, I can just plug it into the computer and it will say new detected device.

  Sigh, worst comes situation that I might as well return to the store that I bought. It's really pathetic, I spent 4 hours trying to get this thing to connect. Too much frustration.

  If you react like your USB, go into the settings > system settings > USB mode and select MSC manually.

  Connected in this way your computer "sees" as a similar storage device. You can simply drag & drop files from your computer to the music folder (you will probably need to tell Windows to "uncover" hidden folders & files) on your Clip +.

• HP printer device manager! Symbol, "failed to connect" Windows Sound - still Printer Works

  Every time you start, I hear the sound of the device "Windows failed to connect.  How can I get rid of this?

  I have a printer HP of J6480 with WIn 7.  Device Manager does not recognize the printer driver.

  In Device Manager, the printer appears with the! error symbol.  No other devices have an error symbol.  The HP Solution Center and the printer work again.

  (1) I tried install fresh of the current HP software full functionality.

  (2) I tried the HP uninstaller program, through all five uninstall programs twice.

  (3) I ran CCleaner to clear the registry problems.

  (4) I tried to delete the Device Manager "Officejet! Entry J6400 series.  The Solution and the printer Center then do not work.  Apparently, the Device Manager recognizes the printer but not the driver.  I have to go to 'Programs', 'HP', then 'Officejet J6400 Series' to reinstall the software.

  (5) I tried to get the Device Manager to recognize the software.  When I click on «!» OfficeJet 6400 series', I get the message "the drivers for this device are not installed (code 28).  If I then click on 'Update Driver' and select' Browse my computer for driver software"then click on"Browse "C:\Users\Myname\Downloads", where I have the Sofware HP 13.0 full feature software and basic print and Scan Driver files, he says "Windows cannot find driver software".   If I click on "Search automatically by the driver software", I get the same message.

  I would appreciate ideas!  Thank you!

  Friendlycomputr,

  OK, if a few things stood here:

  1 windows its "cannot connect device" sounds only with a direct connection, not a network connection which is what you have. (Ethernet)

  2. have you had any other device installed on this computer is more active?

  I would like you disconnect the Ethernet connection and go below:

  1. uninstalling the printer software

  2. make a restart on the computer, when it starts, do you hear the sound "device cannot connect?

  Let me know.

• HP Officejet Pro 8600 Plus does not connect through the Device Manager but will connect bij Win7.

  I have a HP Officejet Pro 8600 Plus that works very well with some computers connected via ethernet.

  On a new computer with Windows 7 Ultimate edition, HP Device Manager can't find the printer, even when I give IP address.

  When I try to add a new printer network in Windows (add printer) windows detects the printer less than a second.

  I need the hp Device Manager configuration so I can use all the options off the officejet.

  Problem solved.

  The printer has a fixed IP address and the customer got his IP by DHCP. By dhcp, dns suffix has been changed so the printer dns suffix and the client does not mach.

  Now the printer receives its IP address by the dhcp server. The dhcp server always gives the same address to the printer.

• Do a clean install on a Dell Inspiron 1525 with Vista... The Device Manager has a yellow labels on all devices under 'other devices '... Unable to connect to the Net

  I did a clean install on a Dell Inspiron 1525 with Vista Home Premium... I can't connect to Internet... The Device Manager has a yellow labels on all devices under "other devices" that includes network and ethernet controllers... Yet the utility on the Drivers and Utilities CD Dell program says that there is a "Marvel 88E80XX rev A01 10/100 ethernet controller" responsible... HELP :)

  Hello

  Use another computer to download and save the drivers to

  copy them to the flash drive and transfer them like that

  Here is the link to the drivers for your model

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&OS=WLH&OSL=en&SystemID=INS_PNT_PM_1525&CATID=-1&impid=-1

  to get help in this matter

  Dell support

  http://support.Dell.com/

  Dell support forums

  http://en.community.Dell.com/support-forums/default.aspx

• Device Manager remotely using Compmgmt.msc Cannot Connect to Vista Edition family of XP

  Whenever I run (compmgmt.msc) computer management I connect the remote computer to Vista Home.  I connect successfully to him but whenever I select the Device Manager it says: "cannot access the computer 'Computer name'." "Or whenever I select the folder to share, I get" error 5: access is denied. " "What seems to be the problem?

  Hello

  Sorry, when I saw the 'I' connect I does not pay attention to the expression "Vista Home".

  The Home of Windows versions may not act as a host to remote control.

  You must upgrade to a version of Windows Pro/Ultimate/Enterprise.

  Or use this, http://www.teamviewer.com/index.aspx

  Or, http://www.uvnc.com/

  Both are free for personal use.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP Device Manager: LDAP connection fails

  Hello community

  I would like to integrate authentication Active Directory in HP (Version 4.5 Rev B) Device Manager.

  When I try to connect, HPDM returns a generic error message.

  I sniffed with Wireshark and found the following:

  searchResDone (2) operationsError (000004DC: LdapErr: IDDM-0C0906E8, comment: in order to perform this operation a successful connection must be completed on the data connection, 0, v1db1) [0 results]

  When I tried to authenticate with this account on the LDP tool, it worked fine.

  My test parameters for the time are like this:

  Host: myLDAPserver.mydomain.net (also tried 'name')

  Port: 389

  No encryption

  General LDAP (also tried "Active Directory)

  Base DN: dc = mydomain, dc = net

  RDN attribute: distinguishedName (also tried sAMAcccountName, CN, UID)

  User name: CN = svc - LDAP - HPDM, CN = AnotherOU, CN = AnotherOU, CN = MyOU, DC = MyDomain, DC = net

  PW: password

  Can someone explain this behavior? I tried all the combinations that I guess. Firewall no problem - there is nothing between my HPDM and the LDAP server.

  Hopefully, you have all the information you need. Otherwise, I'd be happy to provide you with everything you want to know ;-)

  Best regards from Switzerland,

  Simon

  I had to change "cn =" at "or =", as below:

  User name: CN = LDAP-svc-HPDM, OR = AnotherOU, OR = AnotherOU, OR = MyOU, DC = MyDomain, DC = net

• Wireless network lack of connections, network and Device Manager

  Good day, all the

  Recently I had to install a new hard drive and Windows 7 in my laptop VAIO from Sony, model VPC-F1290X, after my previous a corrupt laptop taking a fall. The installation went well, except that my WLAN capabilities are missing. The switch is in on it, of course, but the only option that appears is the Bluetooth. I checked to see if the icon for the network was present in network connections, so I could right click and activate, but it is absent. I also went into Device Manager to see if he would appear if I clicked on 'Show hidden devices', and I also tried to search for the hardware changes. All my drivers are up to date, and since then, I have installed all Windows updates. It has been a little over a month since the installation and I put the problem side and just continued to use the laptop with an ethernet cable. Now that the need emerged for a wireless connection, I can't seem to find a solution, and I found someone who is fully experiencing or has experienced a similar situation. All tracks to the installation of an adapter wireless from the Sony Web site seem to be oriented with a desktop computer.
  Any help or advice to an answer would be greatly appreciated.
  Kind regards
  Ryan

  You have installed the driver from the manufacturer of your laptop wireless?

  http://eSupport.Sony.com/us/p/model-home.pl?MDL=VPCF1290X&loc=3#/downloadTab

• BlackBerry smartphones does not connect to the Device Manager after upgrade [USB]

  Hello

  I've updated de.141.151 and just after the update has been made, whenever I try to connect my BB via USB, I get the message says:

  "Unrecognized USB device".
  The USB devices for computer mark attaached has malufunctioned and windows does not recognize it. "

  I tried cutting things:

  -Restart of BB

  -Restart the PC

  -Repair the current installation of Desktop Manager

  -Restore an older version of the Desktop Manager version

  PS: it is not unknown devices in the 'Device Manager' of the pc so there is nothing to uninstall and reinstall

  All are taken out with no results,

  any suggestions?

  Thank you.

  Found the solution, remove the battery after the closure of the DM, connect the usb cable and then replace the battery, the pc will read it.

• Director of office of blackBerry Smartphones no connection BB recognition despite Device Manager recognizing the BB!

  I'm turning crazy connection.

  I installed desktop manager 4.6 provided on the CD, as the user guide says. I connected the cable between my BB 8220 pearl.

  The BB asks me if I want to turn Mode mass storage and I clicked 'YES '.

  Explorer Windows allows me to view the contents of the phone.

  BB Device Manager tells me that "" USB - PIN: xxxx is connected ".

  YET in the Desktop Manager software on the upper left corner, it says 'Disconnect' and on the lower left corner, it says: "Device Connected (PIN): No.

  Does anyone know why the BB device manager says the BB is connected by software office says the opposite?

  I have tried everything to uninstall for re - install desktop Manager and also pass the phone power on and off.

  Help, please! Someone!

  Hi and welcome to the Forums!

  See this KB for assistance troubleshooting:

  • KB02640 Troubleshooting USB connections
    KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
    KB00019 PIN code not displayed in BlackBerry Desktop Redirector

  I hope that something will be useful.

• yellow sign on in Device Manager network controller (failed to connect wireless network)

  Hi all

  It is almost 3 weeks, I tried a lot of solutions several times, but nothing has worked. I have windows 8 on Lenovo 500, model: 20236. Once, I uninstall network controller in the Device Manager and tried to update again, but he failed. Now I am unable to have wireless internet connection. I tried the Driver Downloader, but nothing has worked. I also tried to install driver lenovo Center but Device Manager detects no driver installed. I have attached a few images to make my problem clear. in 1 picture you can see that there is a yellow sign on network controller and what response he gives the discount. in the 2nd picture, you can see the wireless network connection is missing.

  If one of you could help me. Seriously, I would be really grateful. Hanks in advance.

  Hello

  Please contact Microsoft Community.

  The main reason for this is that they at least have a device that is not working properly. We get generally 18 error code if there is a problem with the device driver, which is most of the time fixed by uninstalling and reinstalling the drivers.

  For reference:

  Error codes in the Device Manager in Windows
  http://support.Microsoft.com/kb/310123/en-us

  Try right click on the unknown device and scan for changes on the hardware and check if this changes. Unknown devices you see is basically not plug-and-play devices. The list under the unknown is not plug-and-play device.

  You can read the following article and check if it helps:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows/Update-driver-hardware-ISN

  I hope this helps. Please let us know the results. Feel free to write us again for any help.