T61p (6460-8XU) - UDMA 6 for the main hard drive HTS722020K9SA00 HTS


I have a T61p with a HD 200 GB (Hitachi HTS HTS722020K9SA00 FDE) and XP Prof SP3 running on it.

HD Tune 2.55 utility says:

Support: UDMA Mode 6 (TONGA/133)

Active: UDMA Mode 5 (TONGA 100)

Drivers/BIOS etc. must be up-to-date.

Is it possible to form 5-6 Mode for a T61p Mode?

How can I do this?

If you want more details on my T61p, please contact me.

Thanks a lot for your answers.



I think that explains what the bit of problem better I did. It should also be noted any misconception.

Tags: ThinkPad Notebooks

Similar Questions

  • Formatting the main HARD drive and do a fresh install of the OS

    Hi guys,.

    I have a Mid 2012 MacBook Pro running Yosemite (10.10.2). I did not care on the data management since the day that I bought and now it's all over the place and a lot of unwanted files. I have backups time machine the main hard drive and I also backed up all important data on a separate hard drive.

    My question is, is it possible that I can erase my entire hard drive and reinstall Yosemite (10.10.2)? The last time I tried to do this, my MacBook connected to the server and installed the latest OS (I guess it was time Cougar 10.8.4).) I don't want to update the OS because my Audio Interface has no drivers for what after 10.10.2.

    I don't like on the data loss that I have multiple backups of all the files of important work, as well as backups time machine of the disk set. Thus, formatting everything is completely fine with me.

    Thank you!

    neilkvyas wrote:

    My question is, is it possible that I can erase my entire hard drive and reinstall Yosemite (10.10.2)? The last time I tried to do this, my MacBook connected to the server and installed the latest OS (I guess it was time Cougar 10.8.4).) I don't want to update the OS because my Audio Interface has no drivers for what after 10.10.2.

    The only ways I know to reinstall 10.10.2 are:

    • You have the initial download of 10.10 after Yosemite went out and created a USB this version thumb drive Installer. If so, you can start Setup from USB, delete your Macintosh HD, install 10.10 and after 10.10 is installed, you can download and run the 10.10.2 Combo Update to bring it up to 10.10.2.
    • You have the 10.10.2 download after this version has been published and have created a USB this version thumb drive Installer. If so, you can start Setup from USB, wipe your hard drive Macintosh and install 10.10.2.

    If you can't do or any of the foregoing, all what you can do then is start Recovery HD and install the latest version of Yosemite, which is 10.10.5. Even if the HD recovery may appear 10.10.2,"limited you will always get the most recent version of Yosemite. Without either of the above, there is no way that I know how to install an earlier version of Yosemite. Maybe you could ask a local Apple Store to see if they have a solution for 10.10.2.

  • Check the main hard drive freezes on Quick Check

    I have a Hp G500 series portable Ubuntu 12.04 running. This morning the case slipped and fell. I check and noticed that the housing has been pressed on the same side as the little light that tells you its reading of the HARD drive, and me being paranoid with my computer, I immediately checked on this subject. The operating system starts fine and the memory test in the checked bios but when I went to check the main hard drive in the bios, it conducted an audit of the fast and then frozen at 2%. I hit ESC, but everything is frozen. < br > < br > I myself have already resigned to the fact that I may need to replace the HARD drive again, but if it can be avoided, I prefer not to spend the money.


    Yes, that means you need to replace the hard drive.

  • Recover the Original of Windows 8 for the new HARD drive


    Drive HARD original of my Dell laptop inspiron 15R 5521 has been crushed. She had previously installed Windows 8.

    And, I had upgraded to windows 10 recently.

    Please guide me to reinstall windows 8 or 10 for the new HARD drive via online, coz' I don't have any support recovery (DVD or USB).

    And further,

    1.) is it possible to reinstall windows for one SSD?

    2.) I get all venus applications (application of VGA, Audio application etc.) from Dell with my laptop with the re-installation of windows... ?

    Thank you


    If your system already has Windows installed and activated 10 follow my instructions here to directly download and reinstall clean Windows 10:



    Looks like you're in this scenario.

    Note Windows 8.1 and Windows 10 editions are specific. If your system came with Windows 8.1/10 unilingual homepage, Windows 8.1/10 will not be activated.

    Unfortunately there is no clear marker for end users to determine the edition so my advise is to try first to try Windows 10 Home, if she does not activate Windows 10 unilingual homepage.

    Get a SSD for optimal performance.

    Dell have updated drivers for Windows 10 pilots (WT64a) system:


    See installing the driver recommended order:


    If Windows 10 was not enabled you must reinstall Windows 8.1 and then upgrade. Follow my instructions here:



  • Re: Satellite P300 - need support for the 2nd HARD drive

    Anyone know where to find support for a 2nd hard drive of my P300-17R laptop? Modelnumber; "PSPC4E-04701LDU.
    It must be sent to the Netherlands.

    Check eBay. You will find everything.

  • Pavilion 550-306no - for the 2nd HARD drive expansion slot?

    While thinking about replacing my old HP tractor, I browsed around the shop online for a possible new unit;

    Seems there is a box called Pavilion 550-306no, sold here in Sweden, which could meet my needs.  However, does anyone know if there is room (or not) for a 2nd HARD drive? Seems all the guides of the old user on how to develop yr PC in the forum of textbooks have been nuked.



    The Specifications for the 550-306no indicate that it is not put into service for a disk hard 3.5 "2nd.  Review the information in the computer case.

    Some models will allow a 2.5 "HD or SSD to add.  See the image below.

    According to the amount of space available between the existing hard drive and the motherboard, you might be able to mount another HD using 3.5 media ".  Those that I had recommended in the past are now $40 (ouch).

  • Identify the main hard drive on an HDX X 18 1103EA

    I seek to replace the main drive in my notebook, but how to identify the main drive, there are two here, with no brand identification who's who? Service guide deosn seem to make light, either...


    Secondary and primary hard drives are located under the lid of the accessories. The main hard disk drive is located to the left disk hard bay, identified by the number "1" embossed on the base unit. The secondary hard drive is located in the right disc hard bay, identified by the number '2' embossed on the base unit.

  • Charge of $621,78 for the bad hard drive

    Hi all

    I know that this is not a question of remedy, but it should be expressed somewhere I found that I was charged for a Fujitsu 250 GB SATA HDD $621,78. Exact same drive price on ebay is $ 68. The party is certainly my fault. It was a warranty repair that turned bad. I put the old hard drive in the corner, and I forgot to return it. Warning e-mails of an imminent load was not read because of anti-spam filters. My fault. However, there is no way anyone can claim that a hard drive is worth anywhere near that amount. The laptop (a dv6700) was around $ 800! I called customer service and said that it can not be repaid, even if I have to return the defective part. I am currently waiting on a call while my case was refitted. I want just opinion of the public on this, and perhaps an HP employee who can actually do something about it will be advice. The spare part # the disk hard is 453775-001. Come on HP!


    -Corey Hansen

    Gee... Thanks for the helpful reply. I already know it's my fault. The point is, I can't expect to pay that kind of money for a hard drive.

    In any case, I'm happy to say that my money will be repaid. I got on the phone with them yesterday and they sent me directly to their row escalated. Apparently, the guy who helped me before in fact did nothing. All I have to do is send in the old part. Done and done.

    At least we know there are a couple of sane people that work the lines of HP service. Just pray you get one when you call.

  • Hard disk failed to keep windows 7 for the new hard drive or SSD

    Hi, windows told me recently there is a problem with my hard drive and that I would back up my data to an external storage device, in case it fails, but don't want to backup my files because they aren't important. When I tried to access file Explorer the next day I got the warning my computer froze. I'm not him have not restarted the laptop since then in fear that it could make it more worn, since I may still need it.

    I try to order a new hard drive or SSD and won't buy windows 10 because it's expensive. Instead, I want to keep my current operating system, which is windows 7 Home premium, which is preinstalled on my laptop.  I have no recovery disks and I didn't do all the backups at all, but here is a windows 7 product key stuck on the back of the laptop.

    I was wondering if I can use the product key to install windows 7 on the new HDD/SSD and if yes, how, I would go to this topic. Also, if I can't do the wrench is it another way (because I may be able to use it yet), because I don't want to have to buy any other OS.


    Laptop: TOSHIBA Satellite A660

    OS: Windows 7 Home Premium

    (Let me know if you need more details)

    Thanks for any help.

    If you are still able to boot from the Windows 7 Desktop on the current hard drive, try to create a set of recovery disks. See the instructions in the following article:


    After you create the defined recovery disc, close, install the new SSD, then use the updated recovery disk to reinstall Windows 7 on new disk SSD.

    You will need 4 blank DVDs.

  • How to disable for the external hard drive restore point in Windows 7

    System Restore performs a restore point for my external hard drive, which I did not need, how to change that?


    Click Start, right click on computer and select Properties.

    In the left menu, select the System of Protection.

    In the Settings of Protection section, click on the external drive letter.

    If the external disk drive appear on protection, click on the Configure button.

    Select the option to disable the Protection system for this drive.

    Click Apply/OK.

    This should return all the disk space used for System Restore on this drive.

    Let us know the results.


  • Location for the second hard drive to 500-164 Pavilion

    Cannot find place to install the second hard drive in the box. Where it is installed?

    HP has not produced a manual upgrade. Please see this manual, because it could help you.

  • need to upgrade 250 GB hard drive, how I transferred all my files and xps3 pro for the new hard drive without lsing all this?

    need to upgrade hdd 250 GB how I transferred all of the files and opperatting sys win xp sp3 new disk hard ad not lose any


    You cannot transfer the operating system from one hard disk to another. But you can use the backup utility to backup data and restore it on the new hard drive.

    Install, reinstall, or uninstall Windows
    How to use the backup utility to back up files and folders in Windows XP Home Edition
    How to use the backup utility to back up files and folders in Windows XP Home Edition
    How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista

  • Copy a project and media for the new hard drive


    I have a very large project stored on an external hard drive and would like to copy the whole thing, including the original media linked to a new hard drive... because I'm afraid that my old one may cease to operate quickly. How can I go on the copy of my project to a new hard disc as well that all sounds, music and video are related?

    Thanks for your help.


    You can create a library of transfer in the user interface and move the top project. (It it will copy as you move it to a new drive)

    If you also move the media, it will break the links between the project and the media (audio and video). When you do that, use the command create a link (on the file menu). If you point to the good volume, it should find the media and offer you the ability to link again.

    Good luck.


  • Where is it save to save a photo library? Requirements for the external hard drive

    Apple support documents have been somewhat vague about the requirements for a player welcome photo library.

    It is not yet clear if Photos can run a file system, is not HFS +: this restriction is mentioned only for the system of libraries of Photos, which syncs with iCloud (https://help.apple.com/photos/mac/1.0/?lang=en#/pht211de786)

    By default, your system library is stored in the folder of images on your Mac, but you can move it to another location on your Mac, or store it on an external storage device. However, to use iCloud services, the external storage device must be formatted using the format Mac OS extended (journaled), also known as HFS +.

    But it is experiences during the migration of libraries, that Photos cannot migrate libraries iPhoto or Aperture libraries to a photo library, if is not filesystem HFS +.  It will try to create the library migrated on the system drive instead (probably because he can't create links hard disk) and generally not running out of storage.

    Apple less did today, confirmed that he is not sure store of the photo library in a synchronized cloud storage, see: update to iPhoto to Photos for OS X - Apple support

    If you store your photo library in a place that is part of a Cloud Computing service (for example, Dropbox, box or Google Drive), your library might be damaged by the synchronization process. So, you might lose photos.

    To see your photos on all your devices, you can use iCloud photo library. To back up your library, you can use Time Machine.

    I still have not found supporting documentation, that clearly indicates if a library of Photos can be stored on a NAS. If it cannot be used as a library of Photos of system.  For the opening of libraries or libraries of iPhoto, the recommendation of Apple was clear: use locally mounted volumes extended, Mac OS X for your Aperture library

    Does anyone found a similar document for the Photos?

    Is it possible to store original files referenced on iCloud by car or in a box?

  • I need support for the second hard drive on my Aspire 8942 G...

    I want to install a hard drive of diving Bay 2nd in my 8945G and I need a support to hold it in place.

    Uses same medium used for the original HD. Any help to locate one, please?

    I didn't use a drive Caddy to install 2nd HD as my laptop has a built-in space to install a 2nd HD. All I need is a hard drive carrier. This support is no longer available because I contacted all online sources recommended to me and was infomed that the part is no longer available.

    So, I used the original media as a copy and one on the metal plate shaped in the same configuration as the original.

    I managed to do an almost exact replica and also managed to locate the 4 screws that I needed a local repair shop comp. I have now the 2nd HD mounted and it seems to work fine. I have access to my DVD/CD stlii would emit so.

    My Acer Aspire 8942 is one of the few models that have been built with a second HD Bay.  A larger...

    Thanks to everyone who responded with advice,

Maybe you are looking for

  • password box. Resolved itself. CAUSE: unknown

    box password is to come and ask for a password and use Manager password to start thunderbird to my gmail account, but I always get my emails from my gmail account

  • Update BIOS on Satellite P10

    There is an update of the bios for my Sat P10 but I don't have a floppy drive. Silly question, but how can I update my BIOS?Brett

  • Problem reading Olympus IX-81 VISA

    I'm trying to control the microscope Olympus IX-81 with LabVIEW and can't seem to connect with the microscope. I recently configured settings in panel test VISA and was finally able to both read and write in the instrument by series, but when I tried

  • Measurement of resistivity with MyDAQ on TEC ca

    Hello I would like to ask for advice: we would like to measure resisitivity Peltier-elements. If we use the DC method, due to the cell voltage-Seebeck effect, we don't get the value of the true resistivity. The common method to use the measure of ca

  • 0Xc946001E error code

    I get the 0Xc946001E error code when I try to add a .mov Quick Time Movie Maker file.  What can I do to import video?