Team F - 108 16 GB USB 3.0

Similar Questions

• Webcam Live USB Toshiba NB500-108

  Hello

  I had installed * PcLinuxOS * on my * Toshiba NB500-108 * netbook.

  Last week, he began to pluck it when I used the touchpad on it for 3 days.
  After that everything went OK that * he didn t want to connect to wifi *.

  I could connect to the net through usb modem (Huawei e173, SIM card: O2 Slovakia).
  Then a few small malfunctions are out so I tried to reinstall the system. and here's the problem.

  I tried, but couldn t. Then I tried a different distributions: * suse, mageia, fedora, kubuntu, zorin * I couldn t install anything. Last night, I then installed * Bodhi *.

  I Don t like it, but it is the only distribution I could install on it.
  But another problem came out. He * doesn´t wants to connect wifi. Once again *.

  How can I know where is the problem?
  That is in material or between the Chair and the netbook?

  The message seems very strange to me.

  First of all, you said that it was not possible to install various Linux distributions.
  I put t know why it was not possible, but you asked for the Wi - Fi solution.
  To my knowledge, the NB500-108 supports RTL8188CE WLan 802.11(b/g/n module) Realtek.
  I think you should check if the module has been recognized by this Bodhi Linux.

  To be honest this distro isn't known to me, but you should check the Bodhi wiki since it provides all the essential info on possible solutions to different questions.
  I found this beautiful page on Wi - Fi using Bodhi problems
  http://wiki.bodhilinux.com/doku.php?id=wireless

  Hope it helps you find the solution.

• Satellite C660-108 does not start if the USB Bluetooth dongle connected

  Hiya,

  I hope you could help me.

  I'm having a problem with my dongle bluetooth and satellite c660-108.
  It all works perfectly. It connects devices via bluetooth and I can do whatever I want.

  But then when I'm mobile stop and turn it on again it will go if the bluetooth dongle is always in the USB.

  I see Toshiba screen and then it hangs with a black screen and a cursor flashing at the top left.
  I have to turn it off, remove the bluetooth dongle and then turn it back on.
  And then windows starts. After that, I put in bluetooth dongle, once again I want to work with her.

  It isn't a huge problem, but it is a bit annoying when I have to leave the bluetooth and put it back again to get the windows began.
  I'm running under win 8.1 but he already had with 8 victory.

  Anyone any ideas?

  > I see Toshiba screen and then it hangs with a black screen and a cursor flashing at the top left.
  Especially the blinking cursor is displayed because the laptop can not find a boot device.

  It seems that the device cannot put on the HARD drive while the USB dongle is connected.
  I would recommend you check the boot order in the BIOS.

  Put the HARD drive in the first place and the USB boot last device.
  Save changes and check if it helps.

• U940-108 satellite starts from USB pendrive

  My laptop does not start by Satellite U940-108 USB key. I tried all USB connetors, I also change the boot order in the BIOS but still continue to start windows 8

  Proceed to a complete stop and after starting your laptop press F12 again to enter the BOOT menu.
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm
  There you should find USB boot option.
  I assume you have created a USB recovery media so that media can be started on this path and you can install the recovery image on this path.

• L10-108 USB problem

  I was working on my computer when it froze, the screen started flashing and I had to take the battery out to get it working again. The problem is that when I started it all three of my usb ports have stopped working. I have a mp3 player and a usb mouse and I got a message saying that they are of unknown devices (they worked fine before).

  After some testing, I updated the drivers for all the three usb ports and all of a sudden one of them works, but not the other two. I now have a usb port that works very well, but the other two refuse to recognize even my mp3 player and when I plug in my mouse they say that it is an unknown device.

  What can I do? I tried to download new BIOS, but nothing seems to work.

  Hello

  tried restoring windows system yet? With the system to store the tool (available in Start - Programs - Accessories - System Tools) you can restore the system to a point while it was working properly!

  Try it and then the two other USB Ports should work again!

  Pete

• NB 305-108-player flash 8 GB USB is not recognized correctly

  Hello.

  I inserted a formatted 8 GB flash drive to make a return to the top and the utility keeps saying "put an at least 5.7 GB flash drive in the USB drive" and refuses to recognize.
  Any ideas? TKS

  Once, I had this problem with USB. While formatting usb, try with different size allocation unit, (you will see in the Windows format options)

• Control of a team via puerto USB

  Hola!

  Estoy tratando control una corriente fuente cual esta conectada via a USB, the idea puerto are control las rampas y dinna corriente y final of the misma. Simple lo cual este momento estoy algo explorando are just leer el campo valor, I made par UN of programas sencillos pero ninguno Funciona³ (since y estan in LabVIEW 8.5). If you can Yes una mano alguien con eso grateful quedo.

  Saludos!

  Brought asi:

  

  PS. Esto are extracted code VI UN

  If LabVIEW 2014 arrastra the imagen solo tienes a UN diagrama of blocking in blanco y el codigo sera funcional

• Replacement of CPU on the Satellite C70DA-108

  Hi team Toshiba to support

  I want to get your help on built-in replacement CPU I had buyed a processor AMD A6-5200 reference number: AM5200IAJ44HM /Socket: BGA769 (ft3)

  I want to ride on my own laptop: toshiba Satellite C70D-A-108 & replace the cpu current part number E1-2100 processor AMD EM2100ICJ23HM / Socket BGA769 (FT3) this link & configurations of my computer laptop http://www.toshiba.fr/laptops/satellite/c70/satellite-c70d-a-108/

  I want to just inquire if this replacement is possible or not & if the motherboard adaptable to the processor a6-5200 or not

  Thank you for your attention, I expect to have a response as soon as possible to soon.

  Hello

  At first, I must say that it is user in the forum and here you can chat with others who have laptops Toshiba and want to share their own experiences. Unfortunately here you won't get official Toshiba support.

  Generally, replacement of the CPU is very delicate issue and quite often discussed on this forum. The fact is that Toshiba and other manufacturers of portable computers do not support these updates.
  Toshiba has offered a few document on this matter and you can read it on http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  Unfortunately I can't provide accurate information on the CPU that you can use, but I assume that you have the new laptop model so CPU upgrade makes no sense to me. It's quite risky upgrade that will void your warranty. What you can try is to contact the nearest Toshiba service provider and seek advice. They should have valid information about hardware compatibility.

• Qosmio G40-108 - prevent recovery of product disc ask to insert the disc

  I have a Qosmio G40-108 and it works fine even if the disc is not read discs any longer, perhaps because of a motherboard failure that I replace the disk with a new of brans and it still does not work, but my problem is the following... I have the product recovery disc, I tried to copy it to a USB key and reinstall the OS from USB and the start of software loading a page with the logo Toshiba asking to insert the recovery disk into drive F: I can't use is more like it's broken. How can I prevent the disc from asking to insert the disk into drive F:? There are lines on the laptop recovery disk to install the USB without using the disc?

  I managed to install a generic Windows Vista 32 bit downloaded from a Web site and my serial key works with it, but I really want to reinstall the original software
  P.S. Recovery of product is for Windows Vista Ultimate 32-bit and just in case there is also a serial number of the disk GMR400766ENG

  I don't have any experience with this, but I found an interesting article on creating recovery USB - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm

  Maybe you'll be able to create the USB stick recovery. Check it out.

• Toshiba excites AT10LE Pro supports USB HOST?

  Clearly, I need to know if this tablet EXCITED AT10LE-A-108 supports usb host I can't get any information on the web...

  anyone? Thank you

  Sometimes a user manual control can be useful :)

• Excite AT10PE-A-105 - cannot install and use USB driver

  Hello

  I bought the AT10PE-a-105 and I never managed to install the driver for debug applicatoin android with eclipse.

  I use Microsoft 8.1 64 bit (last updated).
  I'm following the available tutrorial (RTFM).

  Even I'm a fan of the home user, I need to root and the USB driver works. I post a bad review on gsm arena.

  Someone was able to use the USB driver?
  [usb driver | http://support.toshiba.com/support/viewContentDetail?contentId=4001813]

  I lose 2 days trying to install the usb driver without success and I give up.

  Material may not be updated compared to the pilot then could developer team Toshiba could do a upgrade from usb?

  Concerning

  + The message was edited: link has been removed not allowed.

  Your excited AT10PE-a-105 was released in the European region and it seems to be the right Android WinUsb driver

  http://support.Toshiba.com/support/viewContentDetail?ContentId=4001725

  The driver has been released for the operating environment
  Windows XP SP3 or later (32-bit Version)
  Windows 7 SP1 or later (32-bit / 64-bit Version)

  8.1 Windows isn t taken in charge and I guess this is the main reason why you can not install the driver on your system.

• ASIX MCS 7832 pilot to 200 for USB 2.0 to Ethernet?

  Digitus made a USB to Ethernet Dongle (DN-10050) using the 6 MCS 7832 chip.

  This dongle would be directly usable in 200?

  This is true, the driver 6 MCS 7832 must be pre-installed by Toshiba or be already present in ICS.

  If not, is there another driver present to 200 (with the flavor of the ICS) makes "USB 2.0 to Ethernet?

  Thank you in advance.

  Hello

  I read in some Forums Android that Digitus Ethernet USB adapter is not supported by Android.

  > To make this true, 6 MCS 7832 driver should be pre-installed by Toshiba or already present in ICS.

  Don t think that there is no present in Ice Cream Sandwitch and according to the page Asix, the Android driver for this chip. Just the driver Windows, Linux, and Mac OS are available.
  http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=108;74;109&PLI = 74

• Limitless is not future team of apple (mac os) is awsm.

  Why your team do not work to make mac os more universal and personal computer so that it can easily share files with other os (windows specially) flash player, using these os (mac) hold me between four walls is not professional in any sense.when I format a USB stick using mac os than its becoming easy to copy large files or any other file on that key. "As I say in big letters", BUT when I use the same USB to copy this file in any accounts of his watch windows pc no even my USB quality limit to 200 MB of files is this freedom . Now, your team to tell that its policy of our society so that no virus or bugs come to your mac operating system, my opinion is, put these viruses within these four walls no of users. so that the user can invent or create something that is not unlimited and I am ensuring that the day is not far when each user become a mac user.

  What is your question?

• Partition recovery & system NB250-108

  Hello!
  How can I recover/reinstall the SYSTEM (e) partition on my NB250-108 because I did something stupid and messed up my SYSTEM partition (E :) so that no software resides in this score now.

  The information I want is what should be the Partition sizes for the DATA (d) and SYSTETM (e), what software should I have installed under the SYSTEM partition and is at - it all URLS where I can download it from, this software also must be made bootable? (for recovery system etc.).

  Please note: I'm still all software should I under the partition DATA (d :)) and its single partition SYSTEM (E :) software missing.) I hope not to have to pay for the recovery DVDs!

  Thanks a lot for your help and your suggestions.

  Hello

  > The information I want is what should be the Partition sizes for the DATA (d) and SYSTETM (e), what software should I have installed under the SYSTEM partition and is at - it all URLS where I can download it from, this software also must be made bootable? (for recovery system etc.).

  No, you can't download the image of Toshiba.
  If you want to install the Toshiba Recovery disk image, then you must order the CD from here:
  http://backupmedia.Toshiba.EU/landing.aspx

  Then you would be able to reinstall the image of Toshiba, but for this you will need an external USB CD/DVD drive.

  The other possibility.
  You could install a fresh Windows 7 operating system with a USB key.
  To do this, you would need something like Wintoflash
  http://WinToFlash.com/home/en/

  Need driver can be downloaded from the Toshiba driver page

• OfficeJet Pro 8500 a: 8500 a plug the USB to the PC and wireless for Mac

  Our Officejet Pro 8500 a is connected via USB to our HP Pavilion running Windows 7. This connection works well. However, I tried to connect my iMac (OS 10.10.2) to the wireless printer with no success. If I disconnect the USB from the PC, I can connect wirelessly from my Mac. My question is: the Officejet Pro 8500 a does support multiple types of connections - one by USB and the other by wireless? If so, then I would appreciate help to understand why my Mac is not the 8500.

  Other details: our wireless router is Apple Airport Extreme. The wireless connection on the printer seems to work (I can print the details of this connection). However, when I try to add the 8500 to the Mac by using add printer, the printer does not appear. (The printer is lit and shows five bars of signal strength, SSID is correct and a valid IP address).

  My Mac is connected to the wireless network.

  Any suggestions?

  I was able to solve the problem of the printer with ethernet connection to the router that provides network wireless for PC and Mac. Now two machines are able to access the printer with no problems. By connecting with an ethernet cable, connect the printer wireless has been disabled. It had to be done because the wireless radio had become unreliable. The idea was that the blue wireless light never came. Thus by connecting wired LAN, all problems are gone. Thanks to the team of Geed for help.