Tecra 8000 discs and USB

Similar Questions

• Tecra 8000: monitor and the HARD disk does not work - does not start

  I have a laptop Toshiba Tecra 8000 given to me the year last by my uncle. I live in England, but it is and bought the PC in Italy. I do not know if this causes complications, but I thought it may be useful.

  Since I got it it occasionally did not display any image of all system startup, so if I have given some time and restarted it would start working again. Happening of bagan more frequently and now I can't make it work. I have conections and found that everything was in place. Then he doesn't seem to be turning on, however when I replaced the front LED cable seems to be turning on and although I couldn't hear much the CPU was luminous heat. I opened the drive and it gave once more, succeeded him and he still wouldn't start. I had purchased and replaced the screws on the heatsink around this area but I did not handle it with many other things.

  So now, I have a monitor that does not work and a gard drive that won't start... Any ideas?

  Thank you!

  Hello

  Could be either the card mother, CPU or ram. The processor when it goes bad or is not locked in place (have had this before, install the CPU but forgot to turn the lock, so he cannot move) the computer will act as its startup, don't give any error and stay on a black screen. Verify that the processor is locked in place. Then remove the ram and try a stick of RAM that runs on another computer. If you try the RAM and the processor do not always start, then chances are your motherboard is dead and must be replaced. Hope this helps and that solve you the problem.

• HP Pavilion G6-2123us: repair bootable disc and USB attached drive

  While he is started on a repair disc, I'm trying to get a picture of a USB external drive system.  The laptop is not able to see the USB drive.  The USB ports are enabled in mode repair disc?

  What I've learned, it's that some newer laptops have a combination of USB 3.0 and 2.0 ports.  Usually the right side of port (port of the mouse) is 2.0 and the left side ports are 3.0.   The Windows 7 repair disc boot environment does not support 3.0 ports.   So the partial answer is to connect the My Passport drive in the mouse port. You will be then able to see the USB, but the downside, is that you have no mouse because the mouse does not work in the ports of 3.0 (or at least mine didn't).  However, the final problem was that even with the key USB plugged into the mouse port and the disc visible by the system, it still can't find the images on the disk.  (maybe the software finds only some drive letters?).  The final solution was to get a 3rd party backup package (Norton Ghost in my case) allowed me to do a custom Ghost disk repair which, when started, was able to see Ghost images, I created.

• HARD on my Tecra 8000 P11 drive failure

  Hello

  I hope someone can help,
  I have an old tecra 8000 P11 and the HARD drive failed, I tried re starting from the cd but says disc hard is not recognized or does not. any ideas?
  Can someone point me in the direction of a compatible HARD drive replacement or original.

  Thank you

  Chrisp

  Hello

  This is an older unit and it is not easy to give you accurate information but I found one that can be useful for you. Obviously, Tecra 8000 comes with different HARD drive capacities and the largest is 14FR. I don? t know which one you have now, but you should not use the HARD drive with too much capacity because it won't be recognized without doubt. I recommend you check eBay because there you can buy an and it won't cost much.

• Need help installing a Tecra 8000 wireless

  I just bought the wife an old laptop tecra 8000 and like to run wifi on it, I bought a d-link router and a d-link usb adapter, but he said I would impose a usb high speed and it n, t, raise the router a pcmia card would work better, also can anyone suggest a modem/router and card that works on it, any help is appreciated...

  Hello

  The Tecra 8000 supports only USB 1.1 standard.
  Are high speed USB 2.0 ports
  Many USB devices are designed only for USB 2.0 and I guess that your USB WLan adapter also supports the 2.0 standard.

  The PCMCIA should work better. There is no standard limitations as on the USB ports.

• How to connect Tecra 8000 to my local network?

  I have tecra 8000 laptop and I want to connect to a network of small size but I can't find any network port on the sides of the laptop... what should I do?
  THX

  Hello

  There is no reason to panic. Please check in electronic stores if you find solution PCMCIA (PCMCIA 10 / 100 M Fast Ethernet LAN Card).

  Good bye

• Tecra 8000 - failure to CD-ROM - new installation disc?

  The CD-ROM drive in my Tecra 8000 has a defect. It attempts to load a CD-ROM, LED is flashing, it stops, and then the drive LED is lit.
  So I guess the drive is down.

  What kind of new CD-ROM is suitable for this laptop? Toshiba only original ones?

  Hello

  Wow, the Tecra 8000 series is really old. Do you use yet this laptop?
  It feels like the notebook would come from the stone age ;)

  However, I think that the CD/DVD drive supports * interface IDE but not all readers would be compatible due to master/slave/cable select settings

  It seems that the reader of DVD-ROM + Toshiba - SD-C2002 + would be compatible.
  Not sure if you'll be able to get this disc because of the age of the unit, but probably the authorized Toshiba maintainer in your country could provide some readers compatible optical disc

• Tecra 8000 - hub USB 2.0 does not

  I need a help. IA´ve had Hi - speed USB 2.0 Notebook card
  22932 http://catalog.Belkin.com/IWCatProductPage.process?Merchant_Id=&Product_Id=1

  but still, I installed all the drivers oryginal CD it does not, as a USB 2.0 but everything also USB 1
  I have Tecra 8000 with 366 MgH processor, 6 GHG's hard drive, I use Windows XP Professional with SP2.
  Anyone know what could be the problem?
  Thank you

  Hello Mad

  In my view, this question must be sent to Belkin. AFAIK for maximum performance, computer system, peripheral and software must all support Hi-Speed USB.

  On this map, I have gift logo see Hi-Speed t.

• Tecra 8000 and broadband connection

  Hi all

  I recently asked to watch Tecra 8000 a friends (PII 233) and give it a bit of an update... Don't know why the most I've ever done, is to add a few small components in my PC at home!

  My question is - is this possible for a connection broadband to be put in place - I looked all over the laptop, but don't find nothing which would suggest it is possible.
  (Also what other improvements should be can) watching us.

  Sorry for the noobness, but any help is greatly appreciated.

  Thank you

  Ben

  Wow this is really an oldie
  Broadband do you mean the LAN port?

  As far as I know that the Tecra 8000 was not equipped with LAN port.
  It s really amazing but it is a fact

  However, if you want to use LAN then I advise you to buy a PCMCIA (Cardbus 32-bit) LAN card that would be allows to connect the Tecra 8000 to LAN.

  See you soon

• Upgrade RAM and disk on Tecra 8000

  I have a toshiba tecra 8000 p2 266 mhz, 64 MB, 6 GB HD.

  My question is I want to upgrade the ram and hard drive. can someone tell me what is the maximum I can put in my laptop. IM aiming for a 256 RAM and 40 GB HARD drive... I want to upgrade the processor, but I don't think it would be possible. If Yes please let me know what is the maximum.

  Thank you guys

  Hello

  I found information that your device can handle with max 256 MB and compatible module unit Pentium II are:
  PA2060U 32 MB
  PA2061U 64 MB
  PA2062U 128 MB

  For user who have the Pentium III unit I'll also post this compatible module are:
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)
  PC100 32 MB (PA3003U)

  HARD drive upgrade is always a little more problematic because of the maximum capacity that will be recognized correctly, but I assume you can use up to 20 GB of HARD disk without problem.
  Sorry, but I didn? t find accurate information about it.

  Good bye

• Tecra 8000: Question on the HARD disk and the password

  Hi all
  A market recently my son bought an old laptop Toshiba T8000.

  Personally, I have absolutely no knowledge of the laptop myself as a desktop is everything I've ever used.
  However, I recharged the battery and the power, it asks for a password, even if what I believe to be the HD is missing (Vacant housing, left under the keyboard and behind the battery)

  Our local store offers him an incredible £121 a new HD

  HA wasted his pocket money on it or can he get a password and the HD at reasonable price to fit?

  Any help is greatly welcomed.

  BREZ.

  Hello

  Especially the password appears at the beginning of the startup procedure because the BIOS password has been set.
  Unfortunately, you cannot delete or remove the BIOS password if the old password of BIOS is not known to you. Either contact you the person who sells you the device and ask for the password or you will contact the service partner in your country for a deletion.

  I guess that's a Tecra 8000 with the number PAT80XE.
  This unit is a little older and so I think that hard drives are rare, a little so more expensive.
  By the way: the device supports an EIDE HARD disk interface

• Tecra 8000: Cannot start - Message "Insert disc in the drive system" lights

  I have a Tecra 8000, I've not used for about two months. Now when I try to start the "Disk system to insert in the drive" message on the display. I tried three disks in the system, but they have not been accepted and the same message appears. I visited in the 'setup' and changed priorities and tried to floppy, CD-ROM, HARD disk drive, and the same message every time. Is it possible that the internal battery "backup" is completely flat?

  Hello

  Well, I'm not sure about your suggestion of the bios battery. Usually, you will see an error massage low battery BIOS or CMOS battery low.
  Well, but if the battery is low, so all settings are disabled and the BIOS can't save the changes.
  It's not easy to say what the problem is. If there is something wrong with the material if you ask ASP for help.

• Tecra 8000: update of the Bios allows booting from USB?

  Hello

  I have Toshiba Tecra 8000 (simple 266 MHZ)
  Will be this bios bios-t8000-930 - trad.zip (08/26/02) allow you to boot from USB?

  Hello

  As far as I know, you need a supported drive to boot from external USB drive.
  The update of the Bios won't boot options.
  If you want you can ask for the readers supported ASP.
  I found this site one:
  http://www.CCD.co.UK/Xpress/catalogue/product.asp?PN=JD0000283

  It s a Toshiba CD - RW / DVD-ROM combo wit reader PC Card interface.

• Drivers PCI and USB for W8.1 HP Compaq 8000 Elite SFF?

  Hi guys,.

  I'm trying to update an old workstation HP Elite 8000 LTS to W8.1 but can't find the right drivers for the PCI Serial Port and USB devices. Driver HP downloads page shows nothing for W8 x 64 when I put in the serial number and search for drivers. Apparently, Windows 7 is as far as I can take this machine?

  Naively, I thought that Windows can handle these aircraft out of the box, given his age.

  Can someone confirm if I'm able to run W8.1 on this material and if yes where I could find appriate drivers for it?

  

  Thank you

  Scott

  You are the very welcome, Scott.

  From what I can make of this hardware ID, it is part of the USB2 controller system.

  Something really got blocked upward with the USB/USB2 chipset driver part.

  See if this Intel chipset driver installation does nothing to correct the problem...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20019 & lang = eng & ProdId = 816

• Re: Tecra 8000 and module MPEG PA2834U

  Hello
  I would like to see on my old Tecra 8000 PII 300 DVD movies. I bought a DVD player, but the movies are restless. I know a hardware MPEG decoder (PA2834U) which can be installed as an option module option.
  This module can be installed on my Tecra? Is the model number: PAT800E-B943IT, originally, it came with a CD-ROM drive.
  Thank you in advance,
  Massimo - Italy

  Hello
  I have a Tecra 8000 PII 400.
  The PCI card (which is actually a 'C-Cube Microsystems Cinemaster C 3.0 DVD Decoder (rev 02)') works fine with W2k.
  On linux, I don't have the drivers to make it work (but I use xine player for watching movies, which is fine with the 400 MHz processor).

  Willi - Vienna