Tecra 9100 - Ethernet is declining

Similar Questions

• Tecra 9100 - problem BIOS update/restore

  Hi all:

  A few days ago, I (declining misguidely) tried to update the BIOS on my Tecra 9100. Now on startup I get the message "BIOS (Block1) is damaged! (Call the repairman). Technician: Place the maintenance disk in the drive and press any key when ready "." I tried to restore the BIOS by following the instructions on the web page of the BIOS (traditional method using a USB FDD) driver - put on with the key immediately to the left of the SPACEBAR key leads to the message "ready for the update of the BIOS. Place the BIOS update floppy in the drive and press any key when you are ready to move forward. "The disk is regularly consulted and the laptop will beep every 10 seconds for a period of a few minutes. Then it stops, but should be repeated after any key is pressed. There is however, no change in the information in the form and no result just possible restart in the same error message on the BIOS damaged.

  Anyone can shed some light on what might be happening here? I'm afraid that I maybe should I follow a few instructions on the screen (as the instructions for the update of the BIOS suggest) that I do not see that the screen is not active? So I can't hit the correct answers when required. Should I really the military and its maintenance diskette? Is this disk available anywhere if I can do it myself?

  Any help or suggestions that anyone can give on this subject would be much appreciated - I don't want to go hunting a new motherboard unless it is absolutely necessary.

  Cheers, Chris.

  Hello Chris

  I am not a technician, but according to your assignment, I'm sure that your BIOS chip is damaged. I'm afraid of nothing that you can do everything alone. I recommend you call and explain the situation.

  I'm really skeptical you will find these special tools online.

• Tecra M5-compatible Port Replicator of Tecra 9100 is?

  I have a port replicator (model PA3082E-1PRP) for my old 3 years Tecra 9100 defective. I'll buy a Tecra M5. Do I need to get a new Port for the M5 Replicator or my old one is compatible with the new computer?

  Hello

  I think that it should be compatible.
  But on the Toshiba options and accessories site I found that these devices with M5 supported:
  Advanced Port Replicator III PA3314E-1PRP
  III Advanced Port Replicator more PA3474E-1PRP
  USB 2.0 Port Replicator II (Ethernet / EU Version) PX1173E-1PRP
  USB 2.0 Port Replicator II (Ethernet / UK Version) PX1173U-1PRP

  To my knowledge, these are the most recent port replicators which are available may be so old appliances are not listed.
  I think you could try carefully connect the laptop with your old port replicator.

• Tecra 9100 wireless network problem

  I'll have a chance by putting my Tecra 9100 with my home wireless network. The network seems to work very well. My other laptop connects to it without any problems and I can connect the Tecra with the ethernet cable. But the wireless connection, it cannot be successfully established by the Tecra.

  She claims to be connected, but he receives no package, and could get no internet connectivity. When I try to 'fix' the connection, it sits there for a while before telling me that the IP address may not be renewed.

  I managed to connect the Tecra to the network of the next door without penalty, which suggests that there is some kind of problem with our network interface. I tried to reproduce the exact settings from my other laptop, so I don't understand what the problem is.

  Any idea would be appreciated with gratitude!

  Hello

  It's really not easy to say what is happening here. The functionality of the laptop is ok and it's very confusing if it works with other local wireless networks.

  I recommend putting your access point to the factory without some specific parameters settings and try to connect it.

  Sorry, but I don? have another idea.

• Tecra 9100 comes on intermittently and turns off after 10-15 seconds

  Referring to a Toshiba Tecra 9100, model No.: PT910E-602SF-FR

  The power button normally doesn't light up at all, even if sometimes it starts normally, starts to load windows, then always turns off after 5 to 15 seconds in any case.

  It always requires the batteries very well, but it won t turn on. I ve checked the ram, hard drive and I re - set the default bios - nothing prevents to cut if you can get it to turn on.

  Any ideas what could be the problem? Any help appreciated, it s the second time I had - the same problem the last time!

  Thank you

  Hey,.

  Have you already tried to clean the fan? Maybe a lot of dust blocking the fan for laptop can start t, and then turns off itself due to a higher temperature. It would be interesting to try to clean it.

  But in my opinion, you've done everything you can do, and it looks like a malfunction of the motherboard. If cleaning using fan doesn t I think the motherboard is faulty or something else. If you are familiar with the disassembly of the laptop, you can try to fix it yourself with second hand parts. Otherwise it s time for a new laptop I think

• Tecra 9100 - no audio device after XP Pro install

  The audio device does not appear after installation of xp pro sp2 on Tecra 9100.
  I tried allsorts to research on forums and websites.

  I found install them drivers on this site but used to my laptop.
  I need to locate the audio device before get drivers?
  I know this is a very old problem but I tried for 12 months with no result.

  Any help appreciated.

  WOW!
  You are still using the good old classic? Surely she s or it was a nice laptop but maybe it's time for something faster? ;)

  Back to your question;
  On the European driver Toshiba page, you can find drivers Tecra 9100.
  You should look in the Archive (in product type click Archive instead of the laptop)

  There are two audio drivers for Win XP.
  She s Yamaha audio driver version
  -5.12.01.3141
  -6.13.10.2152

  I guess the 6.13.10.2152 is a more recent who is available and I think that you should use it!

• Tecra 9100 - BIOS block 1 damaged and the update of the BIOS?

  Hello

  I have an old Tecra 9100 with years of quality service, and it is my first problem, but is a great, after a forced restart the display shows the message BIOS 1 damaged block. I tried to fix the BIOS upgrade to the latest version I found, the 1.6 one, but it is a version of Windows (to upgrade a Toshiba computer I think) and when I try to run it in another computer to generate a floppy and upgrade the BIOS drive, I can't, because a common message from modules of Toshiba.

  Its there any floppy BIOS image - archive I can download to perform the BIOS update the BIOS?

  Thanks in advance.

  Hello

  All you can find is stuff on the Toshiba support page. I don't know where you live, but try to contact nearest Toshiba authorized maintainer.
  They have access to the database of Toshiba and they can get it for you. Call and ask for help. I'm sure they will help you fix this BIOS.

• Customer password-Toshiba Tecra 9100 Setup

  Hello:

  I have an old Tecra 9100 and I need to access the configuration, I wrote to Toshiba Spain provide data on my computer and from there I was forwarded to a different email client and atencionn the truth is that, after nearly two months now, however, no one has contacted me!

  On the page to access this forum is reported that if the user is logged on the Club, among other things, will receive the password if necessary.

  I am really very disappointed with the service that it provides to its customers and Toshiba but I am about to buy a new one, I have serious doubts have emerged whether he should opt for a Toshiba.

  If anyone can help me write in Spanish, my post is [email protected] address

  Saludos,

  Rafa

  Hello Siegen

  I am very interested to understand your problem and try to help but I really didn t understand your problem. Of course, my English isn't the best, but I hope you can clearly explain what you want to know about this old notebook.

  BIOS password has this oldie and now, you don't have access to it now?
  Is your laptop or you bought one?
  Here you can ask what you want and I'm sure that you can chat with other owners of Toshiba laptops on your problems.

  I have two of them and I am very satisfied. Support and customer service are on the high level. So I'm really interested about your problem and the reasons why you think that the service is not good for you.
  I mean, for each question, there must be a logical explanation.

  I am quite often here and you want to discuss with other people. If the last comment on the propaganda is somewhat strange to me.

• Tecra 9100 - which HARD drive is bigger than I can use?

  Hello

  I just bought a second hand Tecra 9100 with a 40 GB HDD (not yet received but it is in transit).
  I would like to exchange the hard disk and put a bigger but in one I was wondering.

  What is the largest disk in the BIOS will support?

  Thank you

  Hello

  This forum contains a large number of threads for similar issues.
  Why you n t use the option search and the search for similar topics?

  I found these threads:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=146617

  Here in this thread someone updated the 80 GB HARD drive
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=76045

• Tecra 9100 - error IDE with new drive

  I want to use a burner DVD UJ - 820B on my Tecra 9100, BIOS-Version 1.6.
  If I change the UJ-820, I have IDE #1 error in the Bootscreen, and the device is not recognized.

  No tool or the update for this problem?

  A #1 IDE error normally if a wrong settings or connection together.
  So I think that the disc is not compatible with the laptop.

  Look in your user manual and choose a drive that is listed in the manual. Not every drive is compatible with any laptop.

• Re: Cannot update BIOS of 1.5 to 1.6 on Tecra 9100 T

  I have problems with the update the BIOS of my Tecra 9100. The current version is 1.5, and I want to update 1.6, so that the DVD-RAM UJ-820 does work.

  I tried to do with the windows tool in the Zip file (error message: user lacks administrative privileges) and with the startup disk (error message: unknown chipset).

  What can I do next?

  Hello

  You are right. On the support page Toshiba 1.60 update is available for the old Tecra 9100. As I see that one option is available WIN. This means that you must do under Windows running. If the option with the startup disk can be done at all.

  Start your Windows, download update (910078v160.exe) and extract it to the desktop. Close all running applications and run the exe file. That s it!

• Re: Tecra 9100 - new HARD drive is not detected

  I have a Toshiba Harddisk provide a Tecra 9100. Checking the BIOS it shows "Enhanced IDE", but you are trying to boot from the disc does not work HARD. Even trying to install a new operating system present, that the HARD drive is not detected.
  From the laptop is also very long.
  Any idea?

  Your new HARD drive is larger than 120 GB? The HARD disk controller supports the 28-bit LBA and large drives as 120 GB will not be recognized by the BIOS.

  What you mean with Enhanced IDE? The BIOS recognizes the new HARD drive with model number?

• Tecra 9100: Try to install updadet driver for card his Yamaha AC - XG

  Hi all

  I got a Tecra 9100 and like many others I had problems after installing SP2.

  I tried to install the sound card with the driver downloaded from the toshiba support page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001b59

  but I get a windows pop saying that the file yacxg.sys is missing.
  Once the installation is complete and the sound card is not installed.

  Is there anyone who can help me?

  Thank you
  Joazinho

  The fact is that the driver listed in the FAQ from Toshiba is for SP1 and NOT for SP2

  I think you should google a bit and should look for if you find an audio driver that is compatible with the Service Pack 2 update

  Yamaha already provides the fixed driver.

  yacxg.sys 6.13.10.2152 with software synthesizer

  yacxgc.sys 6.13.10.3152 free software synthesizer

• Tecra 9100 - required accupoint driver for XP

  Hello

  I need a MS XP driver for the accupoint of my new (used) Tecra 9100. Or at least I think, because the accupoint does not work and there is no configuration on the menus of the mouse tab.

  On the driver download page http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU I don't know which is the "driver type", I have to choose.
  Can someone help me?

  Thank you

  JS

  There is no available accupoint driver for Tecra 9100 and Windows XP.

  I searched on the Web from Toshiba site too and I looked in the installation instructions, but there is no driver available.

  Sorry, but it's done.

• Tecra 9100 - help to choose RAM

  It comes to earlier put that on for some reason any got locked and marked "assumed answered", when in fact it wasn't.

  Eldorado reported me to the answer of Markus77. Thank you, but Markus77 or Eldorado say they tried the modules that listed there and actually pushed them to work in a Tecra 9100. The link in the response of Markus77 only points to one of the many similar provider sites I've seen, who say that the 2x512MB modules are supported. The point is, Lewislite had tried about 5 different brands/replacements and none of them were all-purpose, that they either slow his system or it could not start at all.

  I asked, because I want to upgrade my current 512 MB too, if someone had actually he managed successfully on a Tecra 9100, or if it is one of those rare instances of a model with a motherboard that is insufficient to hold over the limit prescribed by the manufacturer, which for the 9100 by Toshiba 512 MB of cache. Maybe because most of the laptops will accept 2x512MB, suppliers assume just the 9100 will do too and so offer them to anyone willing to buy them. But has anyone actually done and got to work?

  The fact that Toshiba are 512 MB modules is not in itself a response, because they could be directed to other models. The fact remains that Toshiba say the maximum the 9100 is 512 MB, and Lewislite tried 5 different modules to try to go beyond that and found that none of them would be.

  Then, everybody in fact successful to do a better job Tecra 9100 with more than 512 MB or have memory suppliers are mistaken for this model?

  Had a look at the detailed Tecra 9100 here: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download

  It shows that Kingston 512 MB KTT3614/512 RAM is compatible. I am assuming that you can run Modules 2 x 512 MB.

  Make sure you use PC2100 DDR memory. PC2700 should work, but there may be a compatibility issue.