Tecra S2 DVD - RAM mast * a UJ - 830 s

Similar Questions

• Qosmio F10 - DVD RAM mast * a UJ - 830 s firmware 1.0

  Hi all.

  My work takes me to travel regularly in several countries and therefore, my DVD drive is running out of parts.
  I thought the point of having a laptop to use it everywhere.
  Well well, not in this case.
  The irony is that it affects only DVD legal copies of inferior quality are region free anyway.
  I have 2 solutions: make the DVD in my final area, or buy disappointing copies.
  A research on carpet * a DVD RAM XX-8XXX came back many messages but no response.
  Change the disc completely work?
  I think that the film industry has completely missed the point, and I gave you a lot of money to get a product that is limited.
  Any idea?

  Hello Chris

  You are absolutely right about the mobility and I agree with you, but the problem is that the laptop manufacturers have no influence on this. Film companies are responsible for this circus. Cell phone manufacturers offer equipment for each region. For the European market, they must offer a driver of DVD that can read the code 2 and so on.

  Qosmio F10 is known to me and on this laptop is not so easy to exchange the ODD. For me it will be stupid to run around the world with laptop and four sides in the bag. What you can do is make your code free WEIRD but it is not legal and without a doubt, you will lose the warranty.

  Sorry, but buddy is a stupid situation. If you want to read interesting comments for this theme please use the search option on this forum and free region as search terms.

  Good luck!

• Tecra M5 - DVD - Ram is not recognized

  Hello

  This is my 1st post, so this is.
  I have a Toshiba Tecra M5 my old drive has just started to slow down, I bought a new drive Tsstcorp SN-S082H/baby.

  When I slot the drive in the Bay is not recognized by the system immediately unless I'm going to add harware and ASNA for new hardware, and then he picks it up,.
  When stop & restart lappy dvd - ram is not recognized by the system, or BIOS, the light on the flange of the discs is on but when I press the button open nothing happens. I installed the latest firmware, I also don't you any driver of indevice error messages sound as if the reader is not installed, but the light on the drive is turned on but does not open.

  Some1 can help me please?

  Model name: SN-S082H/baby
  Code OEM: TS
  F/W ver. SB01

  Follow the instructions posted by Akuma. Maybe this can solve the problem.

  Also, I checked the Tecra M5 user manual. There is a list with compatible DVD players, and your new drive is not listed. Not every drive is compatible with any laptop.
  If it doesn t work get the reader to the merchant computer buy a compatible player that is listed in the user manual:

  TEAC CD-224EN
  TEAC DV-28EN
  CCP UJDA770
  TSST TS-L462C
  Pioneer DVR - K16
  CCP UJ-841

• Tecra A6: DVD-RAM UJ - 841S region code is locked

  After playing several movies DVD of my homeland and USA the DVD player is locked... Is this true, that the only way to get t reclamation for the Germany operation, is to replace the unit?... .or at least the ROM of the device...

  Thank you very much for the quick responses!

  Hello

  No, it is not possible to
  Is that you can change the region code 4 or 5 times (I don't remember) and then the setting is locked and it of not possible to change more legal way.

  Of course, you will find many tips and tricks on the internet how do I change the settings I would not recommend to follow these guidelines but can damage the drive.

• DVD-RAM 'Power calibration Error' on Statellite L20

  I have a problem with my recorder Satellite and DVD - RAM (MAST * a DVD-RAM UJ - 841S).
  When I try to burn a CD/DVD (I use Nero 6) often I see information "POWER CALIBRATION ERROR".
  So I have a question: this error is software error or is it a hardware problem.
  Sometimes I can burn CD/DVDs.
  I have Windows XP he SP2
  RAM 512 MB
  HARD DRIVE 60 GB
  Computer is almost 2 years old.
  Thanks a lot for all ideas.

  Hello

  Please check this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19024 topic and see what some users think about it.

• How to remove the IDE MAST * A DVD-RAM UJ-820 s - Tecra A2?

  DVD-RAM on my Tecra A2 unit has stopped working (generates many errors of controller to the event log and FAILS in the Toshiba utility). I'm sure it's only the flexible cable (got trapped once that do not closed with care).

  If the cable needs replacing or the whole unit, it should be a fairly easy DIY job, but I can't find detailed disassembly procedures in the manual, or anywhere on the web. Anyone know how to get a service manual for the A2?

  Hello

  Maybe this URL
  http://www.irisvista.com/tech/laptops/Toshiba-Tecra-A2/notebook-disassembly-Guide.htm
  could be useful.
  Good luck!
  Antonio

• Satellite A80-129: Mat * a DVD - RAM UJ-830 s cannot burn DVDs

  MODEL: SA80-129
  DVD RAM TYPE MAST * A DVD-RAM UJ-830 S
  SYSTEM: WINXP
  SOFTWARE: NERO

  (1) DVDRAM CAN READ CD AND DVD EASILY, IT Burns CD WELL, BUT cannot burn DVDs, IT SHOWS: G:\ IS NOT ACCESSIBLE INCORRECT FUNCTION, UNTIL IT WORKS WELL. the blank dvd is not a problem, before I used even type a blank dvd to burn.
  (2) even allow the recoding in the properties, the properties shows the Virgin dvd 0bytes.

  all PROMTLY ANSWER would BE MUCH APPRECIATED.

  It doesn't sound good.
  I had a similar problem of combustion and the end of the story, I replaced the drive ;(
  However, try to remove the drive from Device Manager, and then again to restart the operating system should recognize the device again.
  Then you could check if it able to burn the DVD s s.
  I think you should also try burning different DVD media.

  I have visited many work sites and the reader, and especially the calibration lens malfunction could be responsible for burning problems.
  This could be a worst case and in this case, the replacement is necessary.

• Qosmio F10: DVD-RAM UJ 830-S - I can not burn audio CD

  I am not able to burn audio CDs with my laptop F10-130.

  Is it possible to get an update for the DVD-RAM UJ-830 s

  Hello

  If you are able to burn another one to think there is a problem with your burning software I put t know not which you use, but please try to install another (Nero) and check if there is the same problem again.

  I think that you n t need any update of the player if there is some problem with CD audio.

• Tecra A8: Mat * un DVD - Ram UJ - 841 s is not read / burn any disc

  Hi all

  I have a laptop Tecra A8 with Mat * un DVD - Ram UJ - 841 s. This device is not read / burn any disc. However, Mat * one bed the recovery CD at startup.

  I tried everything: I deleted the registry entries (lower and upper), I uninstalled Ant again once the driver installed... but it doesn't work. Any help?

  Best regards

  Ribera.

  Hello

  In addition to the fact that you can boot from the Toshiba Recovery CD, I think that it s a problem of training material
  I think it's a matter of calibration of lens readers possibly the lens can not calibrate correctly in the right position of s, and this is why the drive can't handle the inserted media.

  This could be the worst case, because this fault is repairable by replacing the drive.

• Tecra A8 - Mat * a DVD - RAM UJ-problem reading 841S

  I have Tecra A8-143 (PTA843E) Lap, WXP Pro SP2 original. Later, I installed SP3 and the problem with the topic. Finally the time Mat * one impossible reed VERBATIM DVD - R (4, 7 GB) discs, even those who got burned in 'home' with Nero (or record now, I'm not sure), although reed he earlier without problems.

  In addition, the reader can Reed DVD-R and Memorex CD - R Verbatim discs. In the meantime I have installed and uninstalled several programs and we hope that the point is in the configuration, but I afraid that SP3 is "fatal error" and I cannot flee from resettlement.

  It is strange to me that this driver for DVD - RAM is Microsoft. can I install Mat * original drivers? My experience is humble and I'll be very grateful for help.

  Thanks in advance.

  > It is strange to me that this driver for DVD - RAM is Microsoft. can I install Mat * original drivers?
  As noted in the previous announcement the CD/DVD drive is still controlled by Microsoft Windows driver!
  There is no other pilot who could control the STRANGE

  Back to your question;
  There are two reasons why your CD/DVD drive does not read the disc;
  First the disc would be insufficiently supported or the s drive laser lens cannot handle the disc to the stress matrix laser lens could also not be clean
  You could clean the lens with a cotton tip and alcohol
  In my case it helped

• DVD - RAM on Tecra A2 do not read DVD and CD

  Hello world

  I mast * one DVD-ram UJ-820 s, who do not read my DVD but reads CD. I reinstalled my OS to see changes, even without hope. I burned an operating system on a DVD and try to boot from the DVD and somehow it works, but when it goes to windows it stop reading any disc and shows me that the disc is empty.
  Any suggestions please?

  Did you receive any error messages?

  I searched for tips on the Microsoft Web site and found this two links:
  How to troubleshoot CD-ROM or DVD - ROM read problems
  http://support.Microsoft.com/kb/218617/en-us/

  How to troubleshoot issues with reading CD, CD - R, CD - RW, and DVD discs
  http://support.Microsoft.com/kb/321641/en-us/

  Maybe it helps.
  Otherwise, I think the reader will slowly until the end of life

• Tecra M7 DVD: CD/DVD RAM drive does not work since the installation of Vista

  I did a clean install on my new Vista Ready M7. He had XP tablet in a first time, and the DVD player worked fine. In fact I used to install Vista (Home Premium).

  Now it doesn't work at all. It runs but does not read. Device Manager tells me impossible to start the device. Tried to update driver and he told me that he has the most uptodate pilot.

  Downloaded all the drivers from the Download Center of Tosh for upgrade of Vista of M7 (who got bluetooth, rotation etc. function properly the screen). But none of the downloads seems to be a driver for the DVD - Ram drive. He cannot find a driver anywhere else (including the Panasonic site).
  DVD player is Mat * a DVD - RAM UJ - 841 s

  Any suggestions?

  Hello

  On the Toshiba driver page, you can find the DLA for Tecra m7.
  Have you tried to install the XP driver DVD-RAM since the Toshiba page on the Vista operating system?

  Maybe it'll market

  But listening the CD/DVD drive uses the current Microsoft drivers that are included in Vista or XP.
  This is why an additional driver should not be necessary!

  An additional proposal;
  Remove the drive from the Device Manager CD/DVD and restart the laptop.
  After restarting again the OS should reinstall the drive and renew the software.

  Another tip:
  -Launch the registry
  -Choose the registry key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -In the right pane, click UpperFilters and LowerFilters, and then click on remove.
  -Reboot the laptop

• The DVD-RAM firmware UJ-830

  I'm trying to find the right firmware for my DVD - RAM drive. It's UJ - 830 s and on the page drivers I find TSST and UJ - 831 that isn't in my notebook.

  Where can I find the firmware of my drive UJ-830 s

  I have problems with burning DVDs (standard 4.7 GB DVD). Device sometimes burn DVD and burn sometimes is failure. DVD media is Verbatim or similar (I never use media at low cost). And the same box (series) DVD media, some media are burned correctly and most of them end with error (7 of 10).

  Thank you

  Hello, Tommy

  As a first step, it will be interesting to know what model of laptop you have exactly.

  A similar problem has noticed one of my friends a long time ago. He bought 50 DVD box and was able to use only first 20 or 25 all the other blank media was not at all usable. I assume there is something wrong in the production.

  I recommend you buy some TDK media but monobloc. I use them for more than 6 years and never noticed any problems. I'm sure your optical disc drive is OK and you don't need no update firmware.

• Portege A600 - need driver for MAST * A DVD-RAM UJ 862AS

  Please, where can I find the driver for:

  CARPET * A DVD-RAM UJ 862AS

  Thank you in advance.

  Sabre - Italy

  Hello

  Why do you ask for it? The drive is not visible?

  I mean that the driver is not required for ODD (optical disc).
  Windows uses the Microsoft own driver who is still part of the Windows System.

  You see a yellow exclamation point in Device Manager?
  I recommend the removal of the STRANGE in Device Manager. Then, you will have access to the registry and should remove the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, you have to restart the device.

  Check and I think that the STRANGE should reappear.

• P20 S203 MAST * cannot DVD-RAM UJ-811 DVD format

  Hello
  I am the owner of a Satellite P20 S203 PSP20E-08J1Z-SL, who works with a CARPET * device DVD-RAM UJ-811.
  I can read and write CDs.
  I can read the DVD also.
  But I can't write DVD!. When I try to format the DVD with the DVDForm tool, it does not work. Even when I right click on the DVD device, the option "format" appears. However, this device is a device of DVD r /-RW. Anyone know why I can't format DVD?.
  Thank you very much. Philbo

  Hello

  Please check this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3284&messageID=10177#10177.

  As much as I know Satellite P20 has installed a small tool that can be used to format DVD-RAM disks, but not for the DVD - RW.

  Good bye