Tecra M2 and memory upgrade

Similar Questions

• Tecra M3 and memory upgrade

  I have a Tecra M3 (PTM30U - 6017 0c) and I upgrade to 2 GB of memory, but one of the slots will not read... only reads 512 stick... I was wondering if there is a fix for this.
  The laptop says it can do 2 GB. Do I need to Flash the BIOS or y at - it another way to get it to pick it up?

  Thanks Lauri

  Hello lauri

  At first, I must say that you are right about upgrade memory. Your laptop can handle with 2 GB of RAM.
  Your description is a bit confusing for me. If you have upgraded to 2 GB, you have probably used 2 x 1 GB RAM.
  So, I don't understand what you mean with * only reads 512 MB stick. *

  Do you use compatible Rams? Can you test the two slots and confirm that they are not defective?

• Tecra A3 - 108 memory upgrade - which speed?

  Hello

  I bought my Tecra A3 - 108 3 years and everything works fine. But 2 GB RAM Windows Vista with certainty is not enough. I want to upgrade the/3 GB with 1 to 2 GB and 1 module of 1 GB.

  In-service tries with Apacer memory running at 800 MHz, but Tecra has not identified 3 GB, just 2 GB :(

  Service technician said that 800 MHz is too fast for this model.

  My question is: what memory should I buy to upgrade my Toshiba? I mean, what is the maximum speed on the Tecra can work? 667 MHz?

  Thanks in advance.

  > Service trying with Apacer memory running at 800 MHz, but Tecra has not identified just 2 GB 3 GB,
  > Service Technician said that 800 MHz is too fast for this model.

  Above all the RAM speed has nothing to do with the upgrade memory max.
  The notebook chipset is not able to manage the 3 GB of RAM, and so the 3 GB of RAM are not recognized! It s any speed RAM is.

  I guess that the laptop uses an Intel 915 GM or similar and this chipset chipset manages max 2 GB of RAM.

• Tecra 8100 - processor/memory upgrade

  Thanks for the help with previous enemy of apology from answers not responding not pc crashed.

  have cannabilised ibm t22 and equipped with 512 ram pc 100 to tecra no idea why, I kinda figured that pc100 is overheating as sage pc100 memory chips, the processor is a 900 I adapted this tecra 600 instead and he sees it only as a 700 despite being a fsb 100 very happy with the gain processor but confused on the question of temp memory It works a HDD 40 gig and xp with a fine dvdwriter, outside temp issue, ideas, thanks

  Hello

  Do you know why laptop manufacturers recommend users to use just original material or tested upgrade parts?

• Tecra A8 - what memory upgrade is the best?

  Hi all

  I have an old model TECRA A8 No.: PTA83E-0GY054G3 and I have recently upgraded to windows 7 (32 bit) and OFFICE10. But it is so slow that I am so fed up. I currently have 1 GB of RAM (2 x 512 2Rx16). Could someone tell me which is the best plug RAM for my computer to buy.

  1. can I buy 2x2gb or even 2 x 4 GB, or windows7 will recognize only 3 GB
  2. can I use pc3 techology or stick to PC2
  3. can I use more rapid frequency IE 667hz or stick to my memory 555hz.
  4. What is the maximum size in GB, each bank can read/accept
  Please advice the HIGHEST specifications I can put in this model and have no problem. And I need advice ASAP. I can't stand another day so slow

  Thanking you in advance.

  Hey Buddy,

  The manual shows as a result of information on RAM:
  256, 512, 1024, or modules of memory 2048MB can be installed in the two memory locations for a maximum of 4096MB (Intel Core Duo/Solo processor module).

  As far as I know your model has Intel Core Duo, which means that you can upgrade your laptop up to maximum capacity of 4 GB RAM.

  But Windows 7 32 bit supports only 3.2 GB of RAM so an upgrade to 3 GB of RAM would be sufficient.
  Specifications of new modules must be DDR2 at 667 MHz.

• HARD drive and memory upgrade on the Satellite P200 - 17 c

  Hello

  I own Satellite P200 17 c. My current memory is DDR2 PC2-5300 2 GB. I would like to upgrade to DDR2 PC2 - 6400 4 GB of ram. I can do and it's going to be some speed improvements, if I update to PC2-6400 PC2-5300 instead?

  I have 2 hard drives on my P200 17 c. 2 x 100 GB. I want to upgrade one of these two HD ranging from 100 GB to 320 GB 5400 RPM. can I do this? and it'll be a difference if I update with HD who has 7200 RPM?

  Thank you

  First of all: your machine is able to handle a maximum capacity of 4 GB RAM, but please be aware that you won´t be able to use all of the 4 GB due to some limitations of the chipset that are explained in the following article: http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm

  Regarding the speed of module: chipset specifications are defined for PC5300, so it will not improve your speed when you install faster modules.

  If you want to upgrade your hard drive then do as you like, because it shouldn´t be any restrictions, you can install a drive with 7200 RPM with a slower.

  The only difference will be that the faster drive faster. The performance of the entire system would increase only when you´re install your operating system on the disk more fast (which is the recommendation of my side :))

• Satellite A300-23d and memory upgrade

  Hi all

  I want to upgrade my laptop memory 4 GB to 6 or 8, I got the Satellite A300-23d.

  What is the best memory for me? I'll get the Win7 64 bit OS
  I understand I have to do a clean install of the operating system, so my 2 Q is where can I get all the programs of Toshiba I got with the pc?

  Thannks for the help

  Hello

  Up to 8 GB of RAM according to specification for laptop computer, you can upgrade.
  You must use the RAMs 1 GB / 2 GB / 4 GB DDR2 800 MHz. If you 2x2gb for now, you can buy 4 GB of RAM additional or maybe two of them to use maximum RAM.

  Module of RAM of 4 GB compatible a part PA3670U-1M4G number.

  Win7 drivers download page you will find under http://eu.computers.toshiba-europe.com/innovation/windows7_drivers.jsp
  Unfortunately for your models PSAGCE drivers are not available for the moment. I'm sure that the pilots will be ready for download in the next few days. From time to time to check this page and you will see when drivers will be there.

• Satellite P100-160 and memory upgrade

  I have a P100-160 with 2 GB of memory installed.
  I use Win7 (32 bit) and do some really serious graphics, and management changes.
  I use about 2.75 TB of hard drives (USB).

  Can you get it someone please let me know if I could reasonably expect to see an improvement in the performance and reliability by increasing the installed memory.

  Other (other than buying a new laptop) suggestions for performance improvement would be welcome.

  Thank you

  Ian

  If you are happy with this old piece of hardware you n t need new laptop computer. Upgrade of RAM is OK and you can do it alone. According to tender specifications that your P100 can be upgraded up to 4 GB of RAM.

  Compatible memory modules for your Satellite are:
  1 GB (PA3411U-2M1G)
  2 GB (PA3513U-1M2G)

  If you have any other questions you are welcome.

• replacement of (imminent) stack and memory upgrade?

  Hi I'm going to change my battery of the DM3-1020ED.

  It is useful to replace my dm3-1020ed 2 X 2 GB memory 2 X 4 GB memory? So, I can keep going for another 2 years?

  Works on windows 7-64 bit

  Thanks for the reply!

  GoMarcel wrote:

  ERICO,

  I want to continue to use it for a while and most of my data in the cloud, a SSD drive would be a good solution (long), suggestions? And can I transfer the OS on the SSD drive myself?

  Regards Marcel.

  The easiest way is to use a kit to upgrade. I used an upgrade kit from Corsair with a series of strength notebook SSD SATA 3 expansion kit. It came with a cable adapter usb and cloning software that allowed me to re-bind SSD to the laptop. I installed the software cloned OS to SSD and removed the original hard drive and replaced by the SSD.  This notebook is incredibly fast.

  There are other ways to do it, but it's probably the simplest method for most people.

  Best regards

  ERICO.

• problem of stick two T61p and memory upgrade

  http://forums.Lenovo.com/LNV/board/message?board.ID=T_Series_Thinkpads&thread.ID=37219

  Of sktn77a in the thread above - "the question of the"two-stick"(as I know) is only with the T61p with GPU FX570 but it won't hurt to remove a stick for testing purposes and then Exchange."

  I just bought a T61p (6457-7WM) with the FX570 - there is 2 GB of RAM for now (1x2Go I guess, but did not check, can I register this software somewhere to save it opens?), running XP pro. What is the prevalence this "two stick" issue, I searched here but do not find much on it. Where can I get information?

  I understand that XP can't see only 3 GB but I read if you install 2x2gb - 4 GB it'll actually work with 3.5 GB (which is better than only 3 GB?). Is this true?

  When I buy the RAM is better to simply the order of Lenovo? I am technically savvy but did not RAM before upgrading. I remember that it is good to do the same brand? Don't know what specs on the RAM, I need if you could save me reading that would be great.

  Thank you very much

  EDIT: Also is there a list anywhere of what makes the lenovo other software pre-installed? Trying to find information on google etc. when selections for the Base software selector was not simple. I ended up installing XP with factory settings deselect all options selection of basic software but not I have a device that is not installed driver and I'm puzzled as to what it could be. There is nothing in the BSS, which suggests that she's involved with the drivers. Thanks again.

  msk14,

  The question of referenced memory is limited to T61p models, and it's a matter of tolerance, which means that it appears on all systems.   Generally, he is met where the two dimm slots are filled, and the user runs intensive 3D graphics.  Manufacturing variances in memory, individual systems before indroduction of variations in the game and an update or application requirements can causes slightly different symptoms.  Wouldn't this be a concern and hold you back what let it be.

  You could certainly run 2 X 2 config and having two same size modules can provide a performance boost.  I would pay just pay attention to the specs on the speed of the memory.  Of course, I will officially recommend Lenovo memory because it is proven and supported by the warranty of the system which facilitates the events of service - without exclusions, or a question about the fault.

  However, some source memory OEM customers and I am sure that others can chime in with the opinion on the brand and the source.

  Best regards

  Mark

• Computer HP Desktop M1188A upgraded the HARD drive and memory upgrade possible

  Hello

  I have a HP Desktop M1188A running XP Media Center 2005.  The computer runs very slowly and was only 27.6 GB of free space left on the hard drive with a total area of 149GB.  It has 512 MB of memory installed a 4 GB maximum.  Speed supported is PC3200 MB/sec.  Type of DDR.  DIMM slots 4.  160 GB 7200 RPM SATA hard drive.  Fact hard drive 160 GB 7200 RPM SATA means it is a SATA connection?

  I want to switch the HARD disk like this I hope that the computer runs faster.  I'm a complete novice with respect to the operation of computers.  What to buy to upgrade the HARD drive?

  Will it also upgrade the installed memory?  If so, what to do?

  Everything I need to know?

  Thank you.

  See you soon,.

  Michelle

  Michelle,

  Try for battery HP to THE Bing search engine, I found several sites in line with the Chargers and batteries. BattDepot Australia seems to have decent prices... At$ 24.49 for the loader and THE $37,49 for battery. If you have not yet checked the HP battery reminder page, I recommend you do this first.

  Frank

• T60: disk and memory upgrade and OS reinstall

  I have a T60 1951-CZ1, 2 GB of RAM, 100 GB HARD drive.

  I need to upgrade the max memory as possible and replace with a 320 GB or 500 GB HD. What are the supported elements that I need to order?

  Also I have to re-installed factory OS WIndows XP Professional. How to do this?

  I've traveled a lot of messages and lenovo support pages, but I couldn't find a complete answer

  Thanks in advance

  After all, it's easy

  I finally solved it

  I bought the upgrade memory and a new drive

  I ordered the 1 + 5 rescue & recovery and product recovery CD

  I reinstalled the XP Professional factory (rescue and recovery disk is not explicit about the possibility to reinstall on a new drive, if the precedent was broken, but finally I found the way)

  I did all the updates through microsoft software updates site

  Thank you all for your suggestions which lead me to solutions

• Satellite A100 and memory upgrade

  Satellite A100-523. Why only increase my memory to 1536 MB and 2048MB not as shown in the analysis of the product?
  The laptop won't shoot upward on 2048MB.

  Has your laptop memory graphics card shared?

• Satellite L10-117 and memory upgrade problem.

  I installed the module of ram kingston 512 MB dedicated for my laptop and my system does not start. Laptop does not see its partition with windows. I tried to salvage the dvd system and he does ' t help. Recovery is going ok but after restart problem is the same. I also tried to install this memory module 256 MB (factory installed), and then my black LCD screen and the computer won't shut down. Akku only delete help to extinguish.
  I tried all combinations of this module in the memory 1 and 2 location.
  I use 1.8 BIOS and there I see almost empty memory.

  Hello

  If you start the unit with the original just module becomes so everything ok?

• TECRA M2 LAPTOP - MEMORY UPGRADE

  TO THE GRADE UP TO THE MEMORY IN THE LOCATION B (BELOW), WHAT TYPE OF MEMORY IS IT I.E. SODIMM SDRAM?

  I ASK THIS BECAUSE THE TOSHIBA SUPPORT SITE OFFERS THESE TWO TYPES TO UPGRADE MY MEMORY IN SLOTS A + B.

  I WANT TO JUST UPGRADE THE MEMORY IN SLOT B.

  THANKS FOR ANY HELP.

  Hello

  You can use this memory module:
  SODIMM PC2700 DDR - RAM
  256 MB (PA3311U - 1 M 25)
  512 MB (PA3312U - 1 M 51)
  1024MB (PA3313U-1M1G)

  Good bye