TECRA S11 - impossible to activate Lan cables

Similar Questions

• Tecra A6 does not connect to internet with lan cable

  I got a new Tecra A6, (windows xp) which is barely a week. fine, except that when I connect my router to the laptop computer with lan cable broadband, I am not able to connect to the internet. When I connect the cable to the internet, I'm getting the lan icon works correctly, but when I open a browser page, it says no connection.

  considering that wireless works fine.

  help appreciated.

  Check the firewall settings.
  Maybe the firewall is on and does not allow you to open Web sites.
  Please also check the internet option-> connections in the

• Tecra S11 - market auto in the BIOS

  Hello

  I have a Toshiba Tecra S11 and I want to on my laptop when I plug in the power cable.
  I find all of the features in my BIOS of energy auto on, or something like that.

  Furthermore, is it possible to turn on with a USB keyboard or usb receiver infra-red?

  Thanks in advance for any suggestion

  Hello

  > I have a Toshiba Tecra S11 and I want to on my laptop when I plug in the power cable.
  > I can't find all of the features in my BIOS of energy auto on, or something like that.

  I've never heard of these characteristics and to my knowledge, that this option does not work, there is in the BIOS released for Toshiba laptops.

  In my case the BIOS contains an option like Wake Up LAN or Wake up on the keyboard.
  This allows the laptop to wake up sleep mode by LAN or the keyboard.

  The option that you're looking for should be something like power on USB etc, but I doubt that its share of the current BIOS

• Tecra-S11-controller not installed Ethernet (Win7)

  After you have configured the window 7/64 (exactly the R2 Win2008 server company) recently I installed all drivers 64-bit. for the controller Ethernet (INTEL) he always says "...". not installed. During execution of the related driver (TC00248700A.exe) the extraction work but then nothing happens...
  (Tecra S11 13 M)

  If anyone can help? No success with controller ethernet in the forum yet...

  I checked the page of download of Toshiba and Win7 64 bit LAN driver for your Tecra must be PRESENT one.

  Test it please.

• Tecra S11 unknown drivers by using Win XP

  Hi all, there
  I have a Tecra S11 (PTSE3E), I installed XP on it but has 4 unknown drivers showing in device management, please someone can help me identity this here?

  Thank you very much
  Keith

  Hey Buddy,

  You can check yourself on this page because here in the forum, there is an interesting article on this subject:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

  After that, you can download all the drivers on the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com

• Satellite L550 - impossible to activate Bluetooth & wireless

  Hello

  Can anyone help, I just replaced the hard drive and I have no backup disc for windows 7.
  This laptop came with Vista installed and an automatic upgrade to windows 7.

  I downloaded all the drivers for this model and I can not get the wireless or Bluetooth to work as they say of
  to activate the switch. I searched the sides out of the PC and there is NO switch then, how can we get it to work.

  This is the only problem that I have.
  PS The Lan cable works OK.

  Thanks in advance.
  Terry

  Satellite L550 (PSLN8A-00Y008)

  On many models of Toshiba WLAN switch is no longer available and WIFI/BT will be enabled/disabled with function keys (FN keys). To work, you must install added Toshiba Value Package and Toshiba Flash Cards Support utility.

  You have two of them? Check please if Toshiba flash cards are listed in the startup (run > msconfig > startup).
  By the way: you can use the keys FN + Fx?

• Tecra S11 mini audio Dsiplayport - output

  Hello

  I read the user manual and I don't see anything on the audio output mini Displayport.

  Tecra S11 supports audio output via mini displayport is?

  Is there any mini displayport to HDMI cable that supports the sound to send the video and AUDIO to my LCD TV?

  Thank you

  As much as I know there NO sound using mini display port.
  Using this port, you can send a video signal only.
  For sound, you should use external taken (stereo) headset.

• Tecra S11 - FN + F5 won't switch to VGA screen

  I have a problem with the Tecra S11 series.

  When I press the FN + F5 button to poster that the system refuses to respond to my request and automatically comes back on the LCD screen. (Or in the case of an external VGA monitor to the monitor).

  Because of this problem, I am unable to switch between the screen of my laptop and my VGA monitor when I want to work in my office.

  I found a few ways around this issue, like the mode of presentation, but this isn't the way it is intended.

  Can someone help me with this problem?
  I already tried to install either the 'Hotkey utilities for display devices"and"change of display device. Both packages try to start, give the cmd.exe window and then the error output a "; Installation Failed. "message.

  More information about the system:
  Toshiba Tecra S11 - 11G (PTSE3E)
  Operating system: Windows XP (company policy).
  BIOS version: 2.20
  THIS version: 1.70

  I hope someone has an idea about this.

  With respect,
  Rik

  According to portable documentation this laptop came with Windows XP Home edition installation disc.
  This Toshiba WXP recovery image is installed on your system s WXP own Tecra or company?

  As a rule, what you need is:
  # V6.06.03 TOSHIBA common modules
  # TOSHIBA Hotkey Utility for V3.5.1.0 display devices
  # TOSHIBA screen device utility change V3.2.1.0

  These three tools are important for the functionality of FN + F5.
  Do you use the VGA VGA cable or an adapter?

• Use of DVI port on Port Replicator II with Tecra S11 - 11G

  Hello together,

  I use a Toshiba Tecra S11 - 11G with port replicator.
  I use an external monitor L1950, it is connectetd with VGA cable.

  Now, I want to use the DVI Port of port replicator, but the monitor did not detect the signal.
  Is it possible to use the DVI connection?

  Kind regards

  Michael

  Hello

  Your Tecra A11 does not support DVI port
  The Replicator replicates the ports available for laptop. But if the mobile phone does not support a certain port, then the port replicator is not able to reproduce such interface so I guess that's the reason why DVI ports could not be detected using port replicator.

  PS: did you install the driver provided with USB 2.0 Port Replicator II package

• Questions on the Tecra S11 - 11 d wireless

  If Win 7 64. Tecra S11 - 11 d, Intel Centrino Advanced-N 6200 AGN wireless network card,
  Witch wireless is enabled, all tests performed, OK, but configfree who recognize wireless is disabled even if the switch is on. Thus, wirelss remains off.
  I have the drivers updated, update the BIOS, etc..
  Before this problem, I have lived several blue screen unexpected crahe when wireless switch and using a wifi connection. So I suspect that there is a HW poblem, although all the tests are OK.

  Any suggestion?
  Thanks, Guido

  Hi Guido,

  This means that in front of your laptop wireless switch is turned on?
  That's ok, but you can also disable WLAN using FN + F8 key combination. So try to press this key combination to activate the WLAN.

  Check this box!

  By the way: wireless network card appears correctly in the Device Manager?

• No lights when the LAN cable is connected by Satellite A30-141

  I'm trying to connect my satellite A30 141 to a router using an rj45 plug. When I connect to the ethernet port, nothing happens. no lights on my laptop. someone at - it how to deal with this issue. I can reset the port of a Charter service engineers.

  any help would be much appreciated

  Hello

  I put t know which lamps do you mean because I don t find any LAN LEDs on this laptop. In case you I would recommend checking the status of LAN card in Device Manager. Check if this card has been properly recognized and if there is no yellow exclamation point.

  In addition, I put t know what you expect. If you connect the LAN cable to the laptop from the LAN icon in the taskbar should usually shows the connected state of LAN cable (NO red x). If you do not see this icon please activate this option in the properties of LAN.

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Impossible to activate touch id on this ios ipad 10

  Hello

  I have updated my Air 2 day before iPad and from my iPad slow, battery down faster and worst of all I get this warning on the screen, (impossible to activate touch id on ipad) try to reset and add the new fingerprint, but it does not at all. It's the product of 2 years and this bad with the new iOS n slow down in case of failure.

  Apple says it's best iOS, for me the worst until this iOS...

  any idea anyone?

  Hi Cacsh,

  I see that you post today because you are having a problem getting ID of contact set up on your iPad 2 Air. I also see that you encounter some problems related to the slow-running and your battery drains faster that you expect. I would like to help with these issues.

  To solve the problem you're having with Touch ID, I would recommend following the steps listed here:

  1. Make sure you have the latest version of iOS.
  2. Make sure that your fingers and the Home button are clean and dry. 1 for Home button, use a clean, lint cloth to wipe off any dirt or debris.
  3. Your finger should completely cover the Home button, touch the surrounding metal ring. Contact ID is scanning, you should not type too fast or move your finger.
  4. If you use a case or a protective screen, make sure that it does not cover the Home button or the surrounding ring.
  5. Go to settings > Touch ID & password and make sure the Unlock iPhone or iTunes and App Store is on and that you have entered one or more fingerprints.
  6. Try to register another finger.
  7. If you cannot register your finger, take your camera to a store Apple Store or Apple authorized service provideror Contact the Apple Support.

  Use the ID Touch on iPhone and iPad - Apple Support

  Regarding the slow performance issue you mentioned. have you noticed what is happening with any specific application? I would like to gain a better understanding of this issue before providing specific recommendations. To answer your concerns about the battery life, take a look at this document for more information on how to monitor your use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To get tips on maximizing the performance of your battery, take at look at this resource:

  Batteries - maximize Performance - Apple

  See you soon.

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• TC 1302 via a LAN cable?

  Hi, I have a new MacBook and replaced so access to my TC.

  The TC is installed within a university network via cable, and I still have the problem to get connected to the internet.

  I installed WLAN and it shows my network.

  However, I want to make my backup, which is not possible via WIFI, such as the TC is not properly installed in the internet.

  So I run the backup vial Ethernet/LAN cable.

  But I still have the problem:

  • where to plug the MacBook (I have a USB-Ethernet adapter for the retina of 13 MB) in the TC? The man or the host 3 ethernet Ethernet plug?
  • How can I tell my MB and the TC that the GET connected? (as I can't see the TC on my MB as device)
  • the reform through to get a proper backup?
  • and: does anyone have a tip for the installation of a TC in a protected University LAN/WLAN? who are the preferred settings? (I spoil in a point and I'm not fixed)

  Best regards, Steffen

  The TC is installed within a university network via cable, and I still have the problem to get connected to the internet.

  Most likely, your University has an Internet router at the other end of this cable. That would mean, you need to configure your TC properly in order to access the Internet. The best course of action is to speak with your University of departmental it to get this set up.

  However, I want to make my backup, which is not possible via WIFI, such as the TC is not properly installed in the internet.

  The TC has NO need to have an Internet connection to use Time Machine for backups. Your Mac has just need to be on the same wireless network that provides the TC.

  • where to plug the MacBook (I have a USB-Ethernet adapter for the retina of 13 MB) in the TC? The man or the host 3 ethernet Ethernet plug?

  It must be plugged into one of the three ports LAN (opposing arrows).

  • How can I tell my MB and the TC that the GET connected? (as I can't see the TC on my MB as device)

  In its default configuration, the TC will broadcast a Wi - Fi network that is not secure, with a network name of something like: Apple network NNNNNN. You just need to connect your MB to this network.

  • the reform through to get a proper backup?

  Sorry, but I do not understand your question.

  • and: does anyone have a tip for the installation of a TC in a protected University LAN/WLAN? who are the preferred settings? (I spoil in a point and I'm not fixed)

  Yes, talk with your University computer support staff.