Telepresence

Similar Questions

• Is any impact of a change of the password of the local user account on an instance of a content server Cisco TelePresence virtual computer?

  Hello

  I'm looking to see if there is an impact to change the password of the local user account on an instance of a content server Cisco TelePresence virtual machine?

  The software version is v6.2 build 4073.

  Thank you in advance,

  Robert

  I'll assume, you are referring to the administrator account, but it can be applied to any local account which is located on the TCS server itself.  It has no impact to change the password, unless you are using doesn't say account to connect to the server of TCS or web interface, it will not affect the application of TCS as most things such as external storage or clustering rely on domain accounts and not the local server.

• Problem of ACTIVE TELEPRESENCE WEBEX

  Launched the notice of meeting, connection endpoints of telepresence OK MCU, MCU WEBEX USER login by VCS Expressway through but Highway VCS for a response is 408 Request Timeout.
  This is what to do?

  I have the same problem, can you elaborate on what was your certificate number? I use valid signed CA on Highway.

• Update | Migration - Cisco TelePresence Content Server

  Hello...

  I have a physical camera TCS M2, I would like to upgrade to the latest version 7. XX verified but it is apparently not possible to perform this procedure for the unit of these versions. What are my options? Is there a version compatible with the model of this device? My solution would be virtualization? Can someone help me with a possible solution?

  Best regards...

  You mention that you're running a TCS M2, which is a second generation aircraft, non - UCS Server?  If so and you want to stay on this material, you can run TCS S6.1 up to S6.2.1 as a virtual machine on that server.

  TCS S6.2.1 Release Notes

  TCS S6.2 VM Installation Guide

  If you plan on TCS S7.x running, you must migrate the TCS to the virtual device, you can run it either on a third generation or fourth generation TCS device or third spec-server meets the minimum requirements.

  TCS S7.2 Release Notes

  TCS S7.1 VM Installation Guide for existing customers

  If you need more information or help, suggest that you move your thread to the telepresence of forums where these devices are most active section discussed.

• Telepresence using PVDM3 instead of standalone MCU

  Hello

  Can anyone advise what will be limited if we use PVDM3 ISRG2 router as a multitouch device instead autonomous telepresence MCU.

  Also we prefer to use CUCM v9.x to VCS.

  Materials will be used:

  1 CUCMBE v9.x

  2 PVDM3-256 (Qty: 2) on 2951 ISRG2

  3 CTS-MX300-55-K9 (Qty: 4)

  4 CTS-EX90-K9 (Qty: 4)

  5 cisco 99971 phones.

  Any valuable advice would be much appreciated

  BR, Shimjid.

  No it's not. There is no control of the layout or floor.

  Please remember useful frequency responses and identify useful or correct answers.

• The Cisco Telepresence SX80 solution help

  Hello

  I really want to get your help in this scenario.

  We have 2 branches and planning to set (for the first site 3 SX80 of three meeting rooms) and (one SX80 for another branch).

  We have all communications between sites works well and phones are connected using CUCM 10.5 my question how connect us these 2 branches to collect and SX80 features on site with a minimum of equipment?

  Can make us the video call normally trunk Sip or H323 or do we have to express way / telepresence Server?

  Please notify.

  Thank you

  Hello

  Could you say how the branches are connected to each other? It is through the Internet or VPN? Then we will know how to position the highways.

  If you have CUCM you will use as your calling command for your SX80s and write them down on it as SIP endpoints.

  SX80 endpoint can be ordered with multisite option so it can appeal a multisite up to 5 participants. You will need Telepresence server to host concurrent conferences with more than 5 participants in a conference. You also need a conductor when implementing telepresence servers to manage the resources of the Conference.

  Kind regards

  Acevirgil

• Telepresence endpoints

  What is the meaning of endpoints Cisco telepresence TC, OF DX, SX, TE, endpoints IX. ??

  DX - Collaboration desktop experience

  IX - Immersive collaboration experience

  EC - endpoint of Collaboration

  TC - Telepresence Codec

  I'm not sure SX.

  Manish

  -Does the rate of useful messages-

• Why replace MSE 8510 MCU 4.4 with Telepresence Server (3.1)

  We have a with MCU 4.4 MSE 8510. Looking at the software accessible to the general public, that looks like that I could replace the software with the telepresence instead server software.

  Why I do this? What can I win (and lose) by? I don't have any old CTS systems, just Jabber, MXP and C systems. Is telepresence server software that is actively developed while the old software MCU is not?

  Thank you

  I agree with you, Codian MCU is the best.   =)

  This is why I think Cisco is not going to add MCU multi-screen support, because if MCU multi-screen support, I don't know that all customers would not want to migrate to server TP or buy a new server TP.

  But because of these two main features of server TP, we think about its use, who are the multimonitor support and support for the optimization of the resources with the driver.

  Many Cisco! As always... In this way, they can keep the two products on the market, MCU and GST.

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

• Telepresence server, control assets drops Conference after 30 seconds

  Much of community support.

  I have the following Setup:

  10.5 (1) version CUCM

  Conductor of telepresence Version XC2.3

  Telepresence Virtual Server Version: 4.0 (2.8)

  EX60 TC 7.1.4

  Cisco 9971, Firmware 1.0000 SR1

  Some other phones (7962, 6941)

  All the end points are saved to CUCM.

  When I do a conference appointment without active active control, everything works fine.

  When I activate the active control (according to ActiveControlDeploymentGuideR3.pdf) the Conference ends after 30 seconds.

  the Conference ends even if I have only one participant at the Conference and any of the phones that I use.

  In CUCM, I configured the relevant parameter in the SIP profile (according to ActiveControlDeploymentGuideR3.pdf)

  on the EX60 I use Active Control, so I see the list of participants and I am able to change the layout of the Conference within these 30 seconds.

  any ideas why this happens?

  the journal of the conductor shows nothing statement

  the telepresence server log looks like this:

  327	14:17:09.170	APP	Info	Conference "8080.MeetMe_mtg' created
  328	14:17:09.264	SIP	Info	Incoming call on 192.168.33.xxx:37124
  329	14:17:09.264	APP	Info	"' Call 24: incoming new SIP call of '[email protected] / * /"
  330	14:17:09.379	APP	Info	Call 24: 'Buero_EX60_Test' has now joined Conference "8080.MeetMe_mtg".
  331	14:17:09.386	IX	Info	Call 24: no encrypted connection to 192.168.xx.xx:31135 for protocols: ping, xccp
  332	14:17:09.814	CMGR	Info	Call 24: ActiveControl negotiated
  333	14:17:46.736	SIP	Error	Call 24: end of appeal because INVITE it transaction timeout
  334	14:17:46.736	CMGR	Info	Call 24: disconnection, '[email protected] / * /"-timeout.
  335	14:17:46.736	APP	Info	Call 24: shoot call them "Buero_EX60_Test" - destroy at request end. timeout
  336	14:17:46.736	SIP	Error	Call 24: BYE transaction failed because the network error
  337	14:17:46.740	SIP	Warning	Cannot determine the destination for the incoming message transaction
  338	14:17:46.741	SIP	Warning	Request received from out-of-call
  339	14:17:48.989	APP	Info	Conference "8080.MeetMe_mtg": deleted via API (not of participants)

  Journal of the conductor, it seems that CUCM closes the connection to RE-INVITE during the transition between the lobby.

  There are several possible reasons, but the best way to determine "why" would be to open a track on CUCM.  More precisely a SDI/SDL (are later versions of CUCM SDL only) track on the CUCM 10.0.2.52 node.  Search for RE-INVITE him entering the IP phone and examine the lines of nearby log for some reason why.

  Alternatively, you can try a few other things:

  #1: Look in Service CUCM settings in the editor, then Cisco Call MAnager to the advanced parameter 'Maximum incoming message size' (there is an Advanced button, you must click above to expose this setting).  If you upgraded your CUCM from an earlier version, this value may need door to 11000 to manage RE-INVITE him to the conductor.

  #2: try disabling the Protocol iX on the SIP, conductor profile and the alias of the meeting of the conductor.

  MP.

• telepresence license server problem

  After you install server telepresence (ova 4.2.4.23) and install license keys, under configuration > upgrade > have management got the keys next feacture: encryption of media - activation of the VM - what other permits are required for the server of telepresence? is another way to install the license to activate the function keys

  So, you have activated the multiparty licensing on driver?

  As for the question on voice only, you must look at your config, you configured following the integration of CUCM-conductor guide.

• Creation of models custom TelePresence server on the virtual machine

  Hello

  1. can we develop custom presentations (especially a small picture of a speaker in the corner of a screen presentation of content) in Server TP Cisco on VM?

  2. it is possible to switch between patterns existing and created manually during a live teleconference?

  Thank you, Nick.

  Custom presentations are not supported on server of telepresence, the only currently available layouts are:

  • EQUAL
  • Eminent
  • Overlay
  • Unique

  You can switch between layouts by using DTMF, keys 2 and 8, or ActiveControl if one button 8 or 10 is connected to the endpoint.

• Telepresence server pool exceeds the capacity of the license

  1, CUCM 11.0;

  2, cisco TelePresence driver XC4.2

  3, cisco TelePresence server on VM 4.3 (1.13)

  LIC-TP-SMP

  and especially the licenseis on the way.

  When I tested the video-conference with these devices that I have, I got an error:

  conferencefactory. "" "Controller: Level ="INFO"Event ="alarm triggered"Id ="50099"UUID ="fd65270e-9426-42f0-b27a-b6ad733c0e43"gravity ="error"detail ="telepresence server pool exceeds the capacity of the license: cannot create conferences as insufficient TelePresence Server license resource is available in the pool"

  I can say that the error I've met, because of the License (LIC-TP-SMP) I missed?

  You mentioned that the SMP license is "on the way"-If you have not all installed licenses? Conductor will support the old model of the "display license" or multi-stakeholder model, but whatever you use you must installed licenses or it won't work. That error seems to indicate that you have no license installed, it won't work until you solve that.

• Driver of Cisco Telepresence - room LoopBack

  Hello world

  Is it possible to create a meeting room on Cisco Telepresence driver that will return the video to the appellant alone in the room? As the [email protected] / * / Cisco's Sip URI? (A kind of selfview room)

  Thanks for your help.

  It is possible to show only one participant connected to a MCU conference selfview, but not for telepresence Server conferences.  It comes without caring if the driver is involved or not.  The service provided by Cisco closure is obtained with the C40/60 endpoints where the audio and the video plays in a loop directly to the connected call (output HDMI to HDMI-in, output audio RCA audio-in RCA/RCA).

• Licenses of telepresence

  Hi all

  Hope this does not sound very stupid. What is the difference between the following license two of the Cisco telepresence room:

  (1) LIC-MX200-MS - MX200 G2 MultiSite Option

  (2) LIC-TP-SMP-EP - shared multi-party Lic for 1 session simultaneous Inc. 2 RMS license.

  Thanks in advance,

  The Multisite option key is so you can use the feature embedded four-way Conference the MX200 G2, where you can connect up to three other participants without needing a dedicated as a server MCU/telepresence conference bridge.  You can learn more about the multisite functionality in the MX200 G2 data sheet.

  Multiparty license shared for those who have the conductor and a telepresence server, licensed SMP can host a single conference with several participants up to the capacity of the telepresence server.  See the multiparty license - a-ice for more information.

• The CTS-CTRL-DVC8 is compatible with the Cisco MX200 G1 telepresence?

  Hi team,

  Please confirm whether CTS-CTRL-DVC8 = (Cisco TelePresence Touch device) is compatible with the Cisco MX200 G1 telepresence.

  Thank you very much.

  Sorry, misread the Gen1 in your message.  Yes, the 8 Touch works with old Gen 1 MX200 of TC software running.  This is mentioned on the MX200 data sheet.  Older hardware (MX Gen1 and C40/60/90) press the 8 only and cannot be upgraded to the new software for THIS.