The components of repetitive serialization error

Just, I was working on a project and first encountered an error and struck me out of the application.

Now I can no longer open this project but other projects always open. Recovery, he did does not either.

Running on Mac OS X El Capitan 10.11.5 Pro.

First release using 2015.0.1. Impossible to pass at this time because it is in a University and software is not connected to the creative Cloud.

Please help because I'm on a deadline in this edition, and it's a very big project. I can try using another computer as most of the elements are on external drives, but I prefer not to go through this. Thank you!

What seems to work with these is just copy and paste to a new sequence that I finally did compared to the overall project of duplication. Still don't know why it is specific to each sequence but that seems to be work around at the moment.

Tags: Premiere

Similar Questions

Cannot install the update error KB973768 is absent from the components to install

Microsoft Update will not install. I ran to the Microsoft 'Fix it' and not the update install always. Error indicates the KB973768 missing components to install. How can I fix it?

OT: KB973768

Hello

Try these steps and let me know the status.

Method 1.

Here is a little bit information about error 0x8007F0F4:

http://support.Microsoft.com/kb/958051/en

Registry warning

To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

322756 (http://support.microsoft.com/kb/322756/)

How to back up and restore the registry in Windows

Method 2.

You can try this difficulty (reset Windows Update components):

http://support.Microsoft.com/kb/971058

Method 3.

Have you tried to download the update and install manually (the good language)?

http://www.Microsoft.com/download/en/details.aspx?ID=74

I hope this helps.

I'm trying to download 11 items that I already have on a new computor windows 8.1 after downloadind the first file and the extraction I get the error message when I try to download the second file: the party reach the components file is missing

I'm trying to download 11 items that I already have on a new computor windows 8.1 after downloadind the first file and the extraction I get the error message when I try to download the second file: the party reach the components file is missing

Make sure you have both. (1 of 2) file .7z and .exe file (2 of 2) under the same folder files

Then double-click on the .exe file (2 of 2) it will start the installation process.

Error message "unable to save all the components of the file...". The file is damaged or unreadable.

There are 22 of these error messages. Then a window 'System Fix' comes up with 4 big questions showing: 1) computer status 2) RAM memory) 3 system disk status and the system registry) 4. It lights continued to say that the reliability of RAM memory is very low, there is a critical error of hard disk, and the Windows operating system cannot detect a free space on the hard disk, hard drive error. Hard drive clusters are partially damaged, segment load failure.

Hello

1. when and where exactly you get this error message?

2. don't you make recent changes?

I suggest you to follow these steps and check if that helps:

Method 1:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/310353

NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

Method 2:
I suggest you try to run the System File Checker and see if it helps:
http://support.Microsoft.com/kb/310747

Method 3:
Also I suggest to run the disk check and see if it helps:
http://support.Microsoft.com/kb/315265

It will be useful.

Win 2003 error - try to add and remove windows components I get this error. IIS.dll Setup library could not be loaded

When you try to add and remove windows components I get this error. IIS.dll Setup library could not be loaded, or function OcEntry could not be found. code error 0x7e is on a system win 2003

Hi MickRl,

The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

Unable to get the windows updates. Get error code 80072EFE. Help!

Unable to get the windows updates. Get error code 80072EFE. Help!

Gary,

ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

by running the Fixit on this page, you can reset to windows update components. but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

suggest you download and save the Fixit. then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously. now run the Fixit and choose the default mode. restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. turn it back on when he finished the race and updates.

collection master cs6 installed won't install all the components for photoshop, after effects, or FB and yet everything is fine

collection master cs6 installed won't install all the components for photoshop, after effects, or FB and yet everything is fine

Alanh61734259 summers - receive you specific error messages in the installation log files? You can find details on how to locate and interpret logs troubleshooting installation with install newspapers | CS5.5, CS5, CS6, CC. You are invited to post specific errors that you will discover in this discussion.

How to drag and drop nodes to tab between the components of the tab

I'm working on this tutorial example ( feature drag - move in the JavaFX Applications |) JavaFX tutorials and Documentation 2 ). Based on the tutorial I want to drag tabs between two tabs. So far, I have managed to create this code, but I need help to complete the code.

Source

tabPane = new TabPane();
Tab tabA = new Tab();
   Label tabALabel = new Label("Main Component");


tabPane.setOnDragDetected(new EventHandler<MouseEvent>()
        {
            @Override
            public void handle(MouseEvent event)
            {
                /* drag was detected, start drag-and-drop gesture*/
                System.out.println("onDragDetected");

                /* allow any transfer mode */
                Dragboard db = tabPane.startDragAndDrop(TransferMode.ANY);

                /* put a string on dragboard */
                ClipboardContent content = new ClipboardContent();
                content.put(DataFormat.PLAIN_TEXT, tabPane);
                db.setContent(content);

                event.consume();
            }
        });

What is the correct way to insert the contents of the tab as an object? In the tutorial simple text is transferred. How do I change this line content.put(DataFormat.PLAIN_TEXT, tabPane); ?

And what is the right way to insert the tab after that I drag the tab:

Destination

tabPane.setOnDragDropped(new EventHandler<DragEvent>()
        {
            @Override
            public void handle(DragEvent event)
            {
                /* data dropped */
                /* if there is a string data on dragboard, read it and use it */
                Dragboard db = event.getDragboard();
                boolean success = false;
                if (db.hasString())
                {
                    //tabPane.setText(db.getString());
                    Tab tabC = new Tab();
                    tabPane.getTabs().add(tabC);
                    success = true;
                }
                /* let the source know whether the string was successfully
                 * transferred and used */
                event.setDropCompleted(success);

                event.consume();
            }
        });

I guess that this transfer is possible?

REF javafx 2 - How to drag and drop nodes between the components of the tab - stack overflow tab

I use a graphic (instead of text) for tabs and call setOnDragDetected on this chart. That way you know which tab is moved. There is no nice way to put the tab itself in the dragboard because it is not serializable (see https://javafx-jira.kenai.com/browse/RT-29082), so you'll want to probably just store currently slipped into a property tab.

Here's a quick example; It only add the tab at the end of the existing tabs in the pane has fallen. If you want to insert it in the location that is closest to the actual drop you probably browse the tabs and find details of chart of each tab, or something.

import java.util.Random;

import javafx.application.Application;
import javafx.beans.property.ObjectProperty;
import javafx.beans.property.SimpleObjectProperty;
import javafx.event.EventHandler;
import javafx.scene.Scene;
import javafx.scene.control.Label;
import javafx.scene.control.Tab;
import javafx.scene.control.TabPane;
import javafx.scene.input.ClipboardContent;
import javafx.scene.input.DragEvent;
import javafx.scene.input.Dragboard;
import javafx.scene.input.MouseEvent;
import javafx.scene.input.TransferMode;
import javafx.scene.layout.StackPane;
import javafx.scene.layout.VBox;
import javafx.stage.Stage;

public class DraggingTabPane extends Application {

  private static final String TAB_DRAG_KEY = "tab" ;
  private ObjectProperty draggingTab ;

@Override
  public void start(Stage primaryStage) {
  draggingTab = new SimpleObjectProperty<>();
  TabPane tabPane1 = createTabPane();
  TabPane tabPane2 = createTabPane();
  VBox root = new VBox(10);
  root.getChildren().addAll(tabPane1, tabPane2);

  final Random rng = new Random();
  for (int i=1; i<=8; i++) {
    final Tab tab = createTab("Tab "+i);
    final StackPane pane = new StackPane();
      int red = rng.nextInt(256);
      int green = rng.nextInt(256);
      int blue = rng.nextInt(256);
    String style = String.format("-fx-background-color: rgb(%d, %d, %d);", red, green, blue);
    pane.setStyle(style);
    final Label label = new Label("This is tab "+i);
    label.setStyle(String.format("-fx-text-fill: rgb(%d, %d, %d);", 256-red, 256-green, 256-blue));
    pane.getChildren().add(label);
    pane.setMinWidth(600);
    pane.setMinHeight(250);
    tab.setContent(pane);
    if (i<=4) {
      tabPane1.getTabs().add(tab);
    } else {
      tabPane2.getTabs().add(tab);
    }
  }

  primaryStage.setScene(new Scene(root, 600, 600));
  primaryStage.show();
  }

  public static void main(String[] args) {
  launch(args);
  }

  private TabPane createTabPane() {
    final TabPane tabPane = new TabPane();
    tabPane.setOnDragOver(new EventHandler() {
      @Override
      public void handle(DragEvent event) {
        final Dragboard dragboard = event.getDragboard();
        if (dragboard.hasString()
            && TAB_DRAG_KEY.equals(dragboard.getString())
            && draggingTab.get() != null
            && draggingTab.get().getTabPane() != tabPane) {
          event.acceptTransferModes(TransferMode.MOVE);
          event.consume();
        }
      }
    });
    tabPane.setOnDragDropped(new EventHandler() {
      @Override
      public void handle(DragEvent event) {
        final Dragboard dragboard = event.getDragboard();
        if (dragboard.hasString()
            && TAB_DRAG_KEY.equals(dragboard.getString())
            && draggingTab.get() != null
            && draggingTab.get().getTabPane() != tabPane) {
          final Tab tab = draggingTab.get();
          tab.getTabPane().getTabs().remove(tab);
          tabPane.getTabs().add(tab);
          event.setDropCompleted(true);
          draggingTab.set(null);
          event.consume();
        }
      }
    });
    return tabPane ;
  }

  private Tab createTab(String text) {
    final Tab tab = new Tab();
    final Label label = new Label(text);
    tab.setGraphic(label);
    label.setOnDragDetected(new EventHandler() {
      @Override
      public void handle(MouseEvent event) {
        Dragboard dragboard = label.startDragAndDrop(TransferMode.MOVE);
        ClipboardContent clipboardContent = new ClipboardContent();
        clipboardContent.putString(TAB_DRAG_KEY);
        dragboard.setContent(clipboardContent);
        draggingTab.set(tab);
        event.consume();
      }
    });
    return tab ;
  }
}

Validate the components even with autosubmit and immediate

Greetings:

I work in an application using ADF 11 g. In my page, I have a < af:selectOneRadio > with two options (selectItem). These selectItem have both immediate and autoSubmit attribute equal to true. Then, there is a < af:panelGroupLayout > what prior partialTriggers for selectOneRadio attribute points. Inside the panelGroupLayout, there are a few < af:inputText > ' s. All are necessary. Depending on the value of selectOneRadio, some entries will have their label has changed, while others will be (or not) renderized. After this panelGroupLayout, I have a < af:commandButton >, where there will be the actual presentation.
What I was expecting, it was, when I changed the select value, a partial presentation would be done without validation and changed the labels or the rederization of the components inside panelGroupLayout. However, the components are being validated. The error messages are displayed and the chagings components do not move.
Googling for a solution (https://www.google.com.br/search?q=adf+not+validate+at+partial+submit), I found some suggestions that either didn't work or thought too complicated (for example, to use a subform and set the page definition XML (http://www.oracle.com/technetwork/developer-tools/adf/learnmore/40-ppr-subform-169182.pdf)). I think there is a simpler solution, but I couldn't find it.
Below is my code JSF:

   <af:form id="formCadastroUsuarioLicitacoes" usesUpload="true">
       <af:panelGroupLayout halign="end" id="pnGL1">
            <af:selectOneRadio id="radioType" value="#{viewScope.myManagedBean.type}" immediate="true" required="true"
                                    styleClass="radioType" autoSubmit="true">
               <f:selectItem itemLabel="Type A" itemValue="a" id="itemA"/>
               <f:selectItem itemLabel="Type B" itemValue="b" id="itemB"/>
            </af:selectOneRadio>
             
               <af:panelGroupLayout id="panelGroupForm" partialTriggers="radioType" styleClass="AFStretchWidth">
                 <af:inputText id="txfDoc" value="#{viewScope.myManagedBean.document}"
                                   label="#{(viewScope.myManagedBean.type == 'b')? 'Doc B': 'Doc A'}" required="true" 
                                   />
                 <af:inputText id="txfcompany" value="#{viewScope.myManagedBean.company}" label="company"
                                   rendered="#{(viewScope.myManagedBean.type == 'b')}" required="true" />
                 <af:inputText id="txfName" value="#{viewScope.myManagedBean.name}"
                                   label="#{(viewScope.myManagedBean.type == 'b')? 'Your Name': 'Name'}" required="true" />
                 <af:inputText id="txfEmail" value="#{viewScope.myManagedBean.email}" label="Email" required="true" />
                 <af:inputText id="txfEmailConfirm" value="#{viewScope.myManagedBean.emailConfirm}" label="Confirm your Email"
                                   required="true" />
                 <af:inputText id="txfphine" value="#{viewScope.myManagedBean.phine}" label="phine"
                                   rendered="#{(viewScope.myManagedBean.type == 'b')}" required="true" />
                 <af:inputText id="txfFax" value="#{viewScope.myManagedBean.fax}" label="Fax"
                                   rendered="#{(viewScope.myManagedBean.type == 'b')}" required="true" />
               </af:panelGroupLayout>
             
            <af:commandButton text="Submit" id="btnsubmit" action="#{viewScope.myManagedBean.save}"/>
       </af:panelGroupLayout>
  </af:form>

Thank you

Rafael Afonso

Edited by: 993323 04/04/2013 13:50

Hey,.

I hate to be the one to bind the docs of Oracle. Did you read this part though? http://docs.Oracle.com/CD/E23549_01/Web.1111/b31973/af_lifecycle.htm#CIAIDFGC

I also know that among the people Oracle Ace wrote a blog on this. I think it's Timo, but I couldn't find him. It's been a while since I read it.

In any case, my suggestion would be to examine the life cycle methods that get ignored when the immediate value is set and see if this makes your problem more clear for you.

I'm sorry I couldn't be of more help, I only looked a bit in the field validation and the immediate field.

Good luck
Dustin

POF serialization error
Hi, I get the following error while performing serialization of POF. Help, please

Impossible
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
to com.tangosol.io.pof.PofBufferWriter$ UserTypeWriter.isEvolvable (PofBufferWriter.java:2753)
Hello

I guess that you have a cyclical reference in your object graph. You can activate references, a feature that we've added coherence 3.7.1 ([url http://www.youtube.com/watch?v=qepCoiMICeQ&feature=youtube_gdata] here's the screencast), or modify your serialization code to delete the call from cyclical Serialization.

Thank you
Harvey

Published by: Harvey Raja January 9, 2012 09:39

In the components Inspector color picker
I want to add a parameter to a custom component that uses the color picker in the components Inspector. I'd rather be able to define the parameters of the component with the class (rather than manually add/subtract settings).

However, there seems to be a conflict between the 'Color' parameter type and the class Color.

To reproduce this problem:
1. define the class of a symbol with the class 'test' attached.
2. set the component parameters in the definition of "component" for the class with the same class of 'test '.
3. drag the symbol on the stage.
4. click on the symbol and set the color parameter in the Component Inspector (important step, otherwise it does not try and set the color)
5. run - receive "1067: Implicit coercion of a value of type int to type fl.motion:Color unrelated." error.

The only way I can see to resolve this is more like a hack - to remove the class 'test' for the definition of component, but leave the color parameter. Now to adjust the color variable in the class of 'test' to expect an int, rather than color.

However, I prefer to keep the test class in the definition of the element, instead of manually changing the settings.

Feels like this area of component settings is in documentation and even maintenance margin (a sort of type this apparent conflict between the class Color and color setting).

Someone at - it ideas or comments?
I just found a good tutorial that answered a few questions I had on the custom components - including this question.

You can separate the definition of the parameter type and the type of variable. You can do this by specifying 'type' in the tag of Inspectable. If its possible to declare a variable of type int, which includes a definition of type "color".

You do this then: (it is essentially class dzedward where the color variable was declared as int, but with the color type that is specified in the tag of Inspectable)

35.0 Firefox is report the SSLV3 security on site errors not using SSLV3 when you will fix it

I was in the middle of a transaction on chaseonline when firefox me hunting and showed a page about the SSLV3 security issues. When I started this morning the version of firefox has been 34.0.5 after what is is that the version of firefox was 35.0. I did the test of SSL site and that the site does not use the Protocol SSLv3, see the link below:

https://www.ssllabs.com/ssltest/analyze.html?d=chaseonline.Chase.com

I've been using version 34 and more for some time and did not have problems accessing chaseonline website, until the 35 version has been installed.

I haven't restarted the browser since it happened, but my guess is that the problem will continue. When this will look?

Thanks for the quick response.

The site wasn't trying to redirect, I was typing in e-mail secure at the time.

I tried several times to reconnect to my account and only got the page generic message about firefox is not able to access the site due to problems with SSLv3 safely. During this time I never exceeded this point trying to connect to the site.

Meanwhile, I realize now that the browser was stuck between versions (34.0.5 and 35). Although I still don't know why 34.0.5 through this error when I used it for a long time I was able to resolve the problem by closing and restarting my browser.

In other words, I am now able to access the site of hunting without errors.

That is why I am rarely, if ever, to host software auto-magiquement update in the background. I'll be this switch off voltage and installation of the updates manually.

Thanks for you comments and feedback!

His

Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

Apple has not renewed the contract with Google to access Google servers.

If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging. Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

There is more support for iPhoto from Apple. You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

It is very likely. If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

See this: Bug: iPhoto 9.4 crashing when viewing the scene

The MacBook Pro hardware test error code: 4SNS/1/40000000:TB3T-128.000 does anyone know what this means?

The MacBook Pro hardware test error code: 4SNS/1/40000000:TB3T-128.000

Anyone know what this means? Next steps?

styner55 wrote:

The MacBook Pro hardware test error code: 4SNS/1/40000000:TB3T-128.000

Anyone know what this means? Next steps?

An error in temperature sensor associated with the component of battery on the CPU

Your only option is to take a test 'Apple Service Diagnostics'

Genius of booking http://www.apple.com/retail/geniusbar/

Online https://getsupport.apple.com/GetproductgroupList.action

check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

I deleted two e-mail accounts in my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

I deleted two e-mail accounts in mail on my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

From the Mail menu bar, you select

▹ Connection Doctor window

In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

The components of repetitive serialization error

Similar Questions

Maybe you are looking for