The DMP 4400 G wireless

Similar Questions

• Access to the MIB on the DMP 4400 g w. #5.2

  We replaced our 4305 4400 g, using the latest version of the #5.2 software

  According to the manual DPM you can access the MIB on the DPM with http://: 7777/get_param? p = xxxxxx

  The 4400 returns nothing.

  Is an idea out there, what is the reason?

  Kind regards

  Andras

  It works fine for me...

  What web browser do you use?

  Is there is a firewall between you and the DMP?

  Is there is a firewall between the DMM and the DMP?

  This is the same command that the DMM sends to the DPM...

  T.

• DMP 4400 (URL)

  Hello

  In the DMP 4400 5.2 firmware, what is the difference between (URL of media) and (display URL)?

  Is there a documentation update for DMP - DM v5.2?

  Thank you

  DMP - DM 5.2 documentation is not yet available but here is

  5.1 information.  I think the only difference is that

  the "video URL" has been renamed "Media URL."

  http://www.Cisco.com/en/us/docs/video/digital_media_systems/5_x/5_1/DMP/user/guide/DMPDMcfg.html

  ---------------------------------------------------

  Showing or stop video content from a URL HTTP

  ---------------------------------------------------

  To view on your screen DMP video content from an HTTP URL,

  or to stop showing this video content, follow these steps:

  Procedure

  ---------

  Step 1 In the Actions to display list, click the video URL.

  Step 2 Enter or modify required values.

  Step 3 do one of the following:

  * To start to show video content immediately, click Start.

  * To stop the spread of the video content immediately, click on stop.

  There could be a delay of as long as three seconds.

  Description of the URL of the video

  ---------------------

  THE HTTP URL. You can enter an IP address or a routable

  DNS name of the server and must also enter the full path

  which points exactly to the video file on this server. THE URL

  cannot be more than 254 characters long, cannot contain

  all the spaces and must use the ISO/IEC-8859 (Latin-1) characters

  encoding. If the HTTP service is running on a non standard logic

  port, use the typical method (: 80, for example) to include

  a port number in the URL.

  ******************************************

  ------------------------------------------------------

  By specifying the URL to load in terms of HTML content

  ------------------------------------------------------

  You can load one web page or other content in terms of HTML (TVzilla). The HTTP URL that you enter persists until you use this procedure again to enter another URL or until the next time that you restart your DMP. You cannot save the URL entry so that it persists after restarting.

  Procedure

  ---------

  Step 1 In the action list view, click the display URL.

  Step 2 Enter or edit the URL HTTP and then click OK.

  Step 3 (optional) to stop the spread of the specified content, do one of the following:

  * Click on the VIDEO button

  * Enter a HTTP URL that points to a different content, and then click OK.

  URL to display Description

  -------------------------------

  The HTTP URL that loads a web page (or other content)

  in terms of HTML content. The URL cannot contain any

  more than 254 characters, cannot contain spaces,

  and must use characters ISO/IEC-8859 (Latin-1) encoding.

  The main difference is the URL access the video clip and the other is the

  Plan BROWSER on the DMP.

  If this answers your question, Please take time to mark this discussion answered & rate the response.  Thank You! T.

• DMP-4400 URL command to play the video/load Playlist

  I would like to be able to play a video on the DMP by launching a URL command line to do this.  I did have the chance to find the correct syntax.

  If I go to the DMP Manager-> display Actions-> playback of the media and insert the URL here, he will play immediately on the DMP.  I would like to reproduce this via the URL command line.

  Media is hosted on a DMM system: http://10.41.25.13/content/f208b20d-58ee-499b-ad82-c8f092ad19c7.mpeg

  In addition, this command can be changed to remind a playlist of the DMM instead of just a video?

  Thank you

  OK, I see what you want now.  My link was just to play a video from another web resource.  Try this on a 4400 for your DMM playlist:

  https://: 7777/set_param? init. BROWSER_CMD =http://10.41.25.13:8080 / xTAS-core/api/xml/app/playlist/start_playlist_11...

  And for your presentation of video file:

  https://: 7777/set_param? init. BROWSER_CMD =http://10.41.25.13:8080/xTAS-core/appgen/clad/clad_127_.htm&init.TVZILLA...

  Hope that helps...

  William - Appspace

• Stendalone DMP 4400 G how fill out the username and password

  Hi all

  I would ask that someone knows (and possible) to enter user name and password for the Web site who ask him when the page loads.

  In two words how to fill guest login form.

  Thank you!

  Hi Hristo,

  It should be possible if your page is basic authentication by the definition of the URL in the following form on the DMP:

  http://: @.

  Kind regards

  Nicolas

• DMP 4400 G RS 232 connection with Cisco LCD 100 PRO 40N

  Hello world

  I know this question has been asked a little before, but I still have trouble affecting the DMM to control Cisco LCD 100 PRO 40N (Samsung) via the RS232 DMP connection!

  I searched and read every post on this forum, ('Samsung_MDC_RS232_Protocol_Ver - 21.pdf' & rs232.tx_hex =) tried but not vain.

  We have DMS VmWare demo (signs & Cast 5.2, Show and part 5.2) and 4400G with firmware 5.2.

  Also, I connected the series RS232 9 pin female to female that came with the TV on the DPM 4400 G and in the port RS232 TV, configured the DMP in the Task tab view control forward as you can see in the picture to set and define the type of TV for Cisco 40N and Power ON and another task for the display OFF. What I'm doing wrong here!

  Any input will be greatly appreciated!

  You must first activate rs232 on the DMP.  For Cisco views, use the system task called "RS-232: control supported, non-DMTech poster.  This will cause the DMP restart.  Once it has restarted, you should then be able to use the rs232 codes or the built in display of DMM controls.  I tested on the same Cisco display with cable included as has managed to turn the screen off and back on orders of DMM.

• How to release/renew the IP address on the DMP

  Is there a way to release or renew the IP address of the DMM on a unit deployed to the area? We have assigned a reserved IP address and I don't see any way to do this via the internal settings of the DMP - 4400G. The static value I'm afraid will require a hard reboot to the endpoint. Running V.5.4

  Thank you

  John

  Hello, the following comments are NOT officially supported by Cisco TAC but can help in the fulfillment of what you need to do.  The operating system for Cisco for the DMP runs UDHCP.  Says there is a way to "Liberate" the DMP's current IP address.

  Method correct procedure to a secondary IP address assignment is either statically configure the IP on the DMP and restart OR configure the DHCP scope to statically assign a specific IP address for the DMP, then restart. Of course, you would do this during a scheduled maintenance period and have someone on site just in case something goes wrong.

  Thus, measures to "liberate" the question a DHCP discover on the DPM and IP config is as follows:

  Note: If the TAC is not already activated, this will also require a restart to allow root access.

  * The first thing is to allow root access to the DPM.  Access the Admin Web DMP interface. Under the section of the Administration of the Web graphic button, select MANAGEMENT of DMP and "Enable Cisco TAC Troubleshoot Access" and click APPLY.  In the ACCOUNT of SERVICE of DMP section, set the TAC account, password and click on APPLY button.

  * A reboot is required to SAVE the changes above.  Select administration ECONOMY and RESTART of the DMP.  Click on the button SAVE, then RESTART button to restart the DMP.

  * Once the DMP has rebooted, you can check the changes to make sure ROOT access is enabled.

  Go and browser HTTP, use the URL https:///show-tech

  Search for "Root access" enabled and you should see something like:

  Access enabled root (0 = yes, 1 = No.): 0

  * After 'Root' access is enabled, you can SSH to the DPM as USER 'root '.  Login with the password of account TAC Service you have installed previously.

  * Change to/sbin directory and issue the command "deconfig udhcpc.

  Example of output:

  --------------

  DMP 4400 192.168.1.129 # udhcpc deconfig

  udhcpc (v1.7.2) started

  / sbin/ifconfig eth0 0.0.0.0

  Sending to discover...

  Select send to 192.168.1.129.

  Lease obtained 192.168.1.129, rent time 259174

  / sbin/ifconfig eth0 192.168.1.129 broadcast 255.255.255.255 netmask 255.255.255.0

  / sbin/route del default gw 0.0.0.0 dev ether

  Directions: SIOCDELRT: no such process

  / sbin/route add default gw 192.168.1.1 dev eth0

  adding domain business

  Add dns 1.1.1.1

  Add dns 2.2.2.2

  Add dns 3.3.3.3

  sender return method =:1.2-> = dest: 1.8 reply_serial = 2

  string '1 '.

  I hope this helps!

  T.

• DMP 4400 cannot read local files

  I use a DMP-4400 with firmware v.5.2.2. The device connects to the network fine and is able to display Web pages on the internet without problem; the ftp server works well also. However, when I try to play any type of local file (located in/tmp/ftproot/usb_1 /) the screen remains blank. I'm assuming that the files because the failover URL is not displayed for .mpg or .html files. I use video files of type MPEG-1 for testing. I have attached one of these videos with a sample file .html that I intend to use a loop of several files.

  Video files are managed using the:

  "/ tmp/ftproot/usb_1/melt.mpg" is entered in the dialog box 'Storage path' under ' play video file stored locally "the GUI.

  HTML is launched using:

  "file:///tmp/ftproot/usb_1/play-local-mpg.html" is entered in the 'URL' dialog box under "URL to display" the GUI.

  These problems if the files are located on the internal memory or external USB disk. Any help will be much appreciated.

  Peter,

  I was able to fix, the issue seems to be with the content, I converted with VLC Player MPEG-TS and it works. Please find the attached transcoded file.

  Use

  playlist var = new Array)

  'file:///tmp/ftproot/usb_1/test1.ts '.

  ) ;

  If this meets your concerns, please mark this message as 'response '.

  Thank you

  Sagar Dhanrale

• DMP 4400 no access to management

  Hello

  I have a couple of DMP s 4400 (version 5.2) that keep hanging up. They continue to play video but do not respond to ping so DMM cannot send orders, management is inaccessible and so on. Is this a software problem or I should RMA them? Other players in networking very well (since the 5.2 FW) and these are the only two who have problems.

  Stoyan

  I'll watch the State info you provided.

  
  

  You mention two things:

  
  

  1 - DMP is available after a restart for a few days.

  
  

  2. the Reset button at the back doesn't seem to work

  
  

  
  

  Try this with the one you have in the lab and see if the problem

  Returns:

  
  

  -Restart the DMP

  
  

  - After restarting the DMP and that you have IP connectivity, visit it

  DMP - DM Web Admin, reset the default DPM using the 'factory restore '.
  default option"
  
  
  * Once the DMP back upward, reconfigure the DMP as needed and run your content
  and lets see if the problem comes back.
  
  
  If the problem does not reappear, go to the website of the other problem DMP and repeat
  the steps...
  
  
  
  
  T.
  
  

• DMP 4400 and 4305 in 5.1

  Hi Tomas

  I use DMP 105, 20 of which are 4400 and 85 g 4305. In everything we set the resolution in wide screen 1920 x 1080 high. The video sources used have been created in SD and HD. Played on the DMP, the video is not visulizado, leaving a black screen. If the DPM configured in 1366 x 768, the video OK. With web resolution 1920 x 1080 pages work well.
  If I change all this resolution dmp cause me more problems that are the web pages It Works with information and configured with this resolucion1920x1080.
  The videos are in MPEG2_TS format
  I have an urgent response because this client is to buy 100 more DMP 4400

  Claudio,

  Can you please provide the following so we can watch

  possible questions?

  Of a DMP that has this problem.  Access the

  DMP - DM Web interface and get shots of the following

  Screens:

  *--> Browser settings

  Settings--> display attributes

  * Settings--> DMP display Dimensions

  * About--> material and Versions of Firmware

  Then, download Media Info and use this tool to get the

  output of 'text' of having the video file media info

  the question.

  http://MediaInfo.sourceforge.NET/en

  Please post or set the text of the video file output.

  If all goes well, after getting this information we can restrict

  to the bottom of the issue.

  Thank you

  T.

• DMS reading 5.2 and direct power on the DMP

  Hi all

  Is it possible to play a live (e.g. from a DME) stream directly to the DMP through digital signs?

  Thank you.

  The DME supports the following formats of live-streaming:

  -Microsoft Windows Media

  MPEG-4/H.264

  The Cisco 4400 G Digital media player integrates with the Cisco Digital Media Manager to offer:

  Support of the video codec based on standards with MP3 and MPEG - 4 Part 10, MPEG1 and MPEG2, audio, all delivered in MPEG-2 TS in UDP (User Datagram) or RTP over RTSP (RTP over TCP) Protocol in both and high-definition standard (SD and HD, respectively) formats

  The key here is MPEG-2 TS.  The DME encoders do not do this.

  Options:

  -Buy an encoder (IE. Scientific Atlanta) that supports MPEG-2 TS.

  -Use a transcoder to INGEST will allow it Windows since DME media and

  Transcode Live of WMV to MPEG-2 TS Stream flow.

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

• can I listen to music on the watch with a wireless headset while I swim laps?

  can I listen to music on the watch with a wireless headset while I swim laps?

  Short answer, Yes, but you will water proof wireless headsets. Not for the first watch of Gen.

• fact the iPhone will have wireless of load capacities

  fact the iPhone will have wireless of load capacities

  Not in mode native, if you were to buy a type of case or another add-on which takes in charge the Wireless charging.

• can I erase the disc without any wireless networks

  I have a time capsule which is my wireless router.  I have not used for time machine because he has older backups of Mac and does not place to save my current iMac.  I can erase the disc without any wireless networks?  I do Air Port utility?

  I can erase the disc without any wireless networks?

  Yes

  I do Air Port utility?

  Yes, see the procedure below

  • Open AirPort Utility
  • Click on the image of the Time Capsule
  • Click Edit in the window that appears
  • Click the disks at the top of the next window
  • Click on clear disk
  • Choose the Quick erase option
  • Click clear

  The procedure will take only a minute or two

• The Satellite Pro 2100 wireless

  I downloaded the driver for the Lan Card wireless built-in in my Toshiba the Toshiba Satellite Pro 2100 Web site.

  However when I follow their instructions on how to install it:

  1. in the [start] menu click [Control Panel], then click on [switch to view beds].

  2. double-click [System], and select the [Hardware] tab.

  3. click on [Device Manager].

  4. increase [ECS] and double-click [wireless network connection].

  However, when I'm around a wireless network connection is not.

  I looked all hidden devices, and it's not listed here.

  I looked in the BIOS but nothing is in the list.

  I have the switch on the side of the case as well, but the light...

  If I try the add / remove option of material for a new network card driver window is empty when I choose the. Download of Toshiba INF file.

  Have also updated the BIOS!

  Any help would be much appreciated!

  Hello

  You built the only card or wireless card was already installed? As far as I know, this unit is ready wireless and the wireless card can be built more.

  If the wireless card is installed properly, it must be recognized by the system and shown in the Device Manager, but in your case, the card is not recognized correctly.

  Please give us more information.