The remote computer disconnected the session because of an error in the licensing protocol

Similar Questions

• "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  Hello

  I received the following error message

  "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  This happens when I try to log on my remote on the icon access log, I put on my computer at home so that I can get to work if I need to.  He worked for a few months after I bought my new laptop and software, but now suddenly it doesn't.  I talked to my guy TI in the work and they seem to think it's a common problem with "Vista Home Premium", I can do to change it so that I can use the remote access icon?

  Thanks in advance

  Hello
   
  Licensing protocol handles the communication of information on licenses between your computer and the remote computer. If there is an error in the licensing protocol, your computer may not be connected to the remote computer.
   
  To resolve this problem, restart the computer and try connecting to the remote computer. If you continue to receive this error message, contact the server administrator.
   
  This also occurs if one of the registry entries is corrupt. Try the following steps to resolve this problem.
  1. Click Start, type regedit and press to enter.
  2. on the window of the registry editor, navigate to Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\MSLicensing
  3. right click MSLicensing, click on export and provide a file name for example RemoteKeyBackup and click on save to the desktop.
  4. right click on the HardwareID key and store under MSLicensing folder and click on delete.
  5 restart the computer for changes to take effect. Restarting the computer will create new keys.
   
  NOTE: If the problem persists, then you can take backup of the MSLicensing registry key and to load it on the computer of the problem, this will fix the problem.
   
  Visit this link for more information:
  http://TechNet.Microsoft.com/en-us/library/cc756826 (WS.10) .aspx
   
  Important: Incorrectly editing the registry can cause serious problems on the computer.
  Back up the registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry
   
  Try the steps and check the result.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Remote Desktop disconnected. The remote computer disconnected the session because of an error in the licensing protocol. Try to connect to the computer again.

  I understand there is a patch to 'fix' it, but I don't know how to access.  Can anyone help?   Thank you.

  Here is an article on this problem with a proposed solution - although it seems a bit risky.  I would create a point system restore and backup of the registry before trying. http://kjctech.net/2009/06/12/the-remote-computer-disconnected-the-session-because-of-an-error/.  The same answer is given by Microsoft here: http://support.microsoft.com/?kbid=187614.

  Here is an another artidle which includes essentially the same correction (although I didn't check closely to see if they were the same): http://www.techbuzz.in/how-to-fix-the-remote-computer-disconnected-the-session-because-of-an-error-in-the-licensing-protocol-in-windows-vista.php.

  The thing is, I can't find a clear answer, if this applies between two ordinary computers or between a server and a computer.  I hope that the solution works in both cases.  If this isn't the case, you can still use the system restore to go back to the old situation and we can try to find another solution.

  I hope this helps.  Keep me posted.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I need to connect 3 computers to one computer, but I get the error message: "no more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept."

  I just bought a copy of a license 3 reviews for QuickBooks Pro 2010. I can connect 2 computers on the home network very well. But when I try to connect computer (network) a 3rd to my machine to share the file, I get the error message. "No more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept." How can I connect my 3rd computer?

  I read the article in the following link, to change the value of the EnableConnectionRateLimiting, but I do not see this key.
  http://support.Microsoft.com/default.aspx/KB/969710

  I currently have Windows Vista Home Premium SP2, 64-bit edition.

  Hello

  Thanks for the response back.

  The command explained in article http://support.microsoft.com/kb/314882 if applies also for Vista, we have been able to run the command.

  Some possible causes for failure Remote Desktop connection are:
  a. authentication level is low/disabled.
  (b) the port of remote desktop can be blocked by a firewall.
  c. remote connections might not be enabled on the remote computer.
  d. the remote computer may be asleep or hibernating.
  e. e user account doesn't have a password.
  f. the remote computer may be too busy to accept more connections.

  To resolve all of the above causes, follow the steps listed under "I can't connect to the remote computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  I hope this helps.

  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• When I try to access remote computers, I get the message: the remote computer disconnected the session because of an error in the licensing protocol. "What should I do?

  What should I do to be able to login once more on my remote site?

  http://TechNet.Microsoft.com/en-us/library/cc756826 (WS.10) .aspx

  http://TechNet.Microsoft.com/en-us/library/cc783693 (WS.10) .aspx

  See if the above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• A Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved

  I am trying to use remote assistance to help with my brothers computer. We both use XP, but when I try to open remote assistance to view and or even take control of his computer, I get an error message: connection A Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved. Why this might be happening?

  Hello

  It depends on how the computers are connected and their intellectual property regime.

  They are on the same network (e.g., connected to the same router)?

  Through the Internet? Something else?

  http://support.Microsoft.com/kb/300546/en-us

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  You get the error "a Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved" when the requesting computer (the computer 'demand' help) sends its private IP address instead of its public IP address in the request for assistance. The solution is 'easy' for some and difficult for others. I present here for your perusal:

  (1) obtain the public IP address of the requesting computer (by visiting a web page such as http://www.whatismyip.com)
  (2) save the remote assistance request computers
  (3) modify the remote request for Assistance (RcBuddy.MsRcIncident) using a text editor (such as notepad) and replace the private - section of IP address should be something like this:
  RCTICKET = 65538,1,192.168.1.33:3389 «»
  with the public IP address from whatismyip.com or elsewhere - should be something like this:
  RCTICKET = 65538,1,74.125.47.147:3389 «»
  (4) save the file of RcBuddy.MsRcIncident 'new '.
  (5) double click it to connect to the computer needing help
  (6) cross your fingers and hope it works!

  I hope this helps someone else - if it's too much trouble, feel free to use the tools mentioned elsewhere in this thread.

  -Computers Acorp
  www.ACoRP.net

• The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  I've always used my blackberry to tether my phone but I get the following error message and I can't solve this problem, any help would be appreciated, thanks!

  The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  Hello

  It seems that the blackberry is not more.

  Pass the installation attaches on the blackberry and make sure that it is configured properly and work.

• Your computer cannot connect to the remote computer

  Hello

  OT:

  Your computer cannot connect to the remote computer because the remote desktop gateway server address request and the certificate subject name do not match. Contact your network administrator.

  I implement the remote desktop session based on Win Server R2 2012.

  I create a free sign for certificate certificate and also install the certificate to the client computer.

  But when I click on any application it shows me error.

  

  Hello

  You may need to ask the question on the TechNet forums. Please post the question here:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Kind regards

• Windows 8 on Vmware discovers 'the connection to the remote computer has ended. "

  Hello world

  I have problems connecting with VMware view
  I installed windows 7 and tested fine. But Windows8 x 64 is not allowed.

  The virtual machine is available on the server of the view state. pls see attached snapshot. When I try to connect to via the customer discovers my session disconnects after a few seconds with a warning "the end of the connection to the remote computer.

  When I check the console vcenter process, it seems that the user connects with no problems. But customer does not display anything and disconnects.

  what I've done so far:
  -Tried both RDP and PcOIP connections
  -Removed and reinstalled the client
  -Remove the agent from the view and reinstall client
  -Server view rebooted
  -There is no open Firewall. I'm on the same subnet
  -increases the size of memory for video display.
  -everything restarted.
  -Check the dns settings, seems to be ok.
  -removed from the field and added.

  Infra:
  ESX 5.1.0 799733
  See 5.1.2
  View customer: 5.2.1 build 937772
  VMware-viewcomposer - 3.0.0 - 691993

  I search around forums but cannot find an excat answer to this question.
  Any help much appreciated. Thank you all

  The complete list of the supported operating systems see 5.1 Agent is shown on page 15 of the installation guide - http://pubs.vmware.com/view-51/topic/com.vmware.ICbase/PDF/view-51-installation.pdf - see the section on operating systems supported for Agent view.

  You will find information on this forum of the people who got 8 windows work and to avoid the "black screen" "the connection to the remote computer has ended", but note that it is not taken in charge with Discover 5.1.x.

  Mark

• code 80090006 error, problem is preventing windows to check exactly the license for this computer. Then you disconnects to the user menu.

  Have window xp error. A problem is preventing windows to check exactly the license for this computer. error code 0 x 80090006. Then it disconnects you return to the screen of the user menu.

  Error code 0 x 80090006

  This problem occurs because the drive letter has changed or that some files can be found in default locations.

  See: http://support.microsoft.com/kb/914232

  You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based computer

  When you try to start a Microsoft Windows XP-based computer, you may receive an error message that contains different error codes. This article describes the causes of the different error codes. This article also provides workarounds for the following error codes:

  • Error code 0x80004005
  • Error code 0 x 80090006
  • 0x8009001d error code
  • Error code 0 x 80070002
  • Error 0x8007007f code or code error 0x8007007e
  • 0x800705aa error code 0x8007007e error code and error code 0x80004005
  • 0x800705aa, error code 0 error code 80070002 x, error code 0x80004005, 0x800405aa error code and error code 0 x 80090019
  • 0x800703e7 error code

  Additionally, this article contains workarounds for some error codes that aren't in this list.

  etc.

  TaurArian [MVP] 2005-2011 - Update Services

• The Client computer could not connect to the remote computer

  Hello

  Relating to the name or a customer request. They have a few problems with the remote desktop connection in Windows XP.

  They haveWindows Home Edition and XP Professional on his laptop computer on his desk.

  They say:

  "I took the liberty to install Office remotely on computers, because it was not installed on the desktop.   I was able to connect to my laptop through my desk, but not vica versa. »

  "When I try to connect to my desktop from my laptop, I get an Error Message"the Client computer could not connect to the remote computer... »

  Hello

  You can read the following article and install the patch available to see if contributing to the issue.

  You receive an error message "the client could not establish a connection to the remote computer" when you try to establish a desktop remote connection to a Windows XP-based computer

  I suggest that you post your question in the TechNet forums if you encounter other issues related to the remote desktop connection.

  Windows XP IT Pro Forums.

• Computer disconnects from the local network after a while

  Hello

  the place I work has a local network with nearly 20 computers.
  One of them is used only to receive some PDF files from the scanner and there our database (PostgreSQL).

  The problem is that, after some time we can not access it via Explorer by typing '\\server' on the address bar, but the connection to the PostgreSQL Bank will continue to operate.

  I have already disabled the drive for energy savings computer network mode.

  What can happen and what can do?

  Thanks in advance,
  Felipe Sousa

  Hi Felipe,.

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that your computer disconnects from the local network.

  I suggest you post your query on the TechNet forums , because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• View the programs that are running on the remote computer.

  How use remote desktop to view the programs that are running on the remote computer. I connect to the pc remotely is used to monitor a communication system for the alarms. The alarm Viewer application runs as a service. When I connect locally to the computer, I can see the application and view the status of the alarm system. When I connect via remote desktop, I can't. I don't see that the application is running in the services list.

  Do you mean the Task Manager?

  If so, try using change sequence to bring up the Task Manager while in the session remote desktop active...

  http://Windows.Microsoft.com/en-us/Windows7/keyboard-shortcuts

  You might also find something in the PsTools collection...

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896649

• Task Scheduler: the remote computer was not pop...

  Task Scheduler: the remote computer could not be found appears when you try to start the Scheduler task to the top program and I am not able defrag my computer either because he says that task scheduler is not running, also failed to start other actions when the Task Manager is open and I am able to remove the connection to another task of computer that is there.

  Click the Start button, type in Services, and then click the Services icon.

  Find the Task Scheduler in the list and check that it is running. If not right click and press start.