the system rp5800 detail: select the port parallel rp5800

Similar Questions

• By selecting USB port is not available in the Installation Wizard of Pinter in XP - 2.

  By selecting USB port is not available in the wizard Installation of Pinter.
  Tried editing the registry and found local-edit string - data value = localspl.dll. "what is normal. Reset once more.
  Resolution not yet found.

  Hello

  1 is your other USB devices work well?
  2. What is the brand and model of the computer?
  3. What is the brand and model of the printer?
  4. who is the Service Pack installed on your computer?

  Method 1:

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

  Note: If you have Service pack 2 on your computer, and then try to install Service pack 3 and check if it helps.

  http://www.Microsoft.com/download/en/details.aspx?ID=10767

  Method 2:

  Remove and reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.

  Plug in the removable USB storage device and perform a test to ensure that the problem is solved

  See also:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_c_portsw.mspx?mfr=true

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

  http://support.Microsoft.com/kb/282842

• remove the ports series and parallel

  Hello

  I wonder what that "sport erial and parallel can then be removed" in all these articles on the new vSphere 6 functions is all about. I couldn't remove these VMs ports before, couldn't I? Nobody seems to get into the details, everyone just copies / repeat the same thing on the other.

  Best regards

  Jan

  Versions previous hardware could always hardware ports series and parallel within the virtual of the motherboard SuperIO chip, even when there are no virtual serial ports or virtual parallel ports configured for the virtual machine - quietly ports would be "present but disconnected", so they would use more space i/o and IRQ, and always appear to be present in the list of devices in your guest OS IRQ and I/O port map.

  With the latest version of the material, if you delete the port virtual series and virtual parallel port, they will be missing... the guest OS won't see all the device, and it consumes no space port of IO and no IRQ.

  I hope this helps!

  --

  Darius

• The Port settings parallel conclusion by program

  I have a colleague who has installed a basic PCI parallel port and he wondered if he could get the address of the port by programming?

  Windows assigns random the 090_hex?

  Kind regards

  -SS

  I believe devcon will do.

• prnport.vbs to add and select the port

  I have the following script, where he creates a port of the printer, for example, 10.10.21.22. He created the port, but then I have to manually select the port in devices and printers. How do I update the port also?

  There is a r - updated the port, but it does not work. It is said:

  Unable to parse the command line. Error 0x1C9 this key is already associated with an element of this collection

  https://TechNet.Microsoft.com/en-us/library/cc754352 (v = ws.11) .aspx

  $GetPrinterIP = Read-Host "Enter printer IP address"
  $PrnportVBS = cd C:\Windows\System32\Printing_Admin_Scripts\en-US
  Cscript Prnport.vbs -a -s $env:COMPUTERNAME -h $GetPrinterIP -r $GetPrinterIP -o raw -n 9100
  

  Hi Tony,.

  The complexity of your concerns, we will have to refer to our Technet forums. Our experts will be happy to help you get the right answer for this case.

  Kind regards.

• Open the ports for the operating system from siebel

  Hello

  I would like to know how can I find all the port associated with Siebel in any environment. I would also like to know whether or not they are listening.

  Thank you

  Abhishek

  Hi Abhishek,

  Please see the following article of knowledge for more information:

  Information about Siebel need Ports. (Doc ID 1629529.1)

  netstat - year gives all ports with the status of those are listening or inactive.

  I hope it helps.

  Best regards

  Chetan

• Web application server - how to change the Port

  When installing LabVIEW, OR adds a process called "Application Web Server" (among a long list of other items) at startup.  It became an issue for our Windows users want to run our real application of Web server on their local computer.  My temporary work was about just disable the Web Application Server in the trunk to the port (8080) are available for other items.  My questions are the following:

  First of all, what kind of impact I look at developing LabVIEW programs?  This process is necessary if I want to work on the network applications?

  Second, it is possible to change the port number of the Web app server to avoid any problems that may exist?

  The Web Application Server is used by LabVIEW Web Services - only if you are not using/writing/developing LabVIEW Web Services, then it will not affect you.

  To change the port, open the Web-based Configuration utility NOR (normally on something like http://localhost:3582 /) and under "Web Server Configuration", you should see "Application Web Server" and you can select which port should be used.

  You can also access it Max by right click on "My System" and selecting "Web Configuration.

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• What is exactly in place at the port before RDP on WebVPN on ASA?

  I've seen discussion elsewhere to use WebVPN of ASA and then using mstsc on Windows to send a normal RDP session through the VPN connection. Success is reported, but the recipe is not specified. I get the notion that it should involve setting up the port forwarding on the ASA. So if for example the forwarded port is 50001, then on the client system would connect through:

  mstsc /v:127.0.0.1:50001

  Who is suggested to http://microsoft-server-operating-systems.hostweb.com/TopicMessages/microsoft.public.windows.terminal_services/781703/1/Default.aspx - there are has similar partial reports elsewhere, as in http://hardforum.com/showpost.php?p=1035146809&postcount=5.

  In our case, that administration of Cisco is in other hands - we are in a situation that is hosted behind an ASA dedicated to our use. What exactly should we ask them to obtain regular Windows RDP works this way? We tried Java and ActiveX, plugins but those are limited in different ways and do not always work on all client systems, so we want to try to use the RDP of MS client instead. We are not in a situation to require our users to install a VPN client software, so we need a way that works with the WebVPN. It is encouraging that other people have of this work. But we can not yet found where everyone has published a recipe in sufficient detail to pass on the exact instructions to our third ASA admins.

  Port transfers the key for this? Or a "smart tunnel" would be an option? Thanks for any advice.

  Pentecost,

  Let's take a step back.

  It works a lot like forwarding with SSH port forwarding. You indicate that some remote host/port will be available via this port locally (and Yes, that you connect through localhost:localport), java applet bit takes care of the rest.

  Now smart tunnel (for programs) is a tricky beast, it is initially essentially all instances of a program to establish sockets via the tunnel.
  Result? You specify that you want to connect to anything on the remote side, as if the program would be remote. Don't know if that makes sense

  It is also smart tunneling of the bookrmaks and home pages, but it is a completely different matter.

  If you are looking for something simple, but maybe not so... easy to use port forwarding should be fine.

  Marcin

  P. S.

  I'm not familiar with the limits of the performance of the Terminal Server services in a tunnel smart (not to say that there is not).

• The ports to open for Hyperion Financial Reporting

  Hello
  
  We are facing a problem in the studio of Hyperion Financial Reporting while trying to connect to the Essbase database. When I gave the essbase cube, studio details is just off the hook and does not. I am able to select the application as the Essbase Server database.
  Give you a brief idea that Server1 holds Essbase, EAS, and Server2 Shared Services, HFR(including Studio), Integration Services. We opened the port 1423 between Server1 and Server2. We also opened 10080 (I don't know why), 32768, 32769 to interact with the application running on these ports. still no answer.
  
  Can someone please suggest me if I need to make some additional changes/configurations. or I do something wrong?
  
  Thank you
  K

  MP says:
  Once again people are unwilling to open as much range and are looking for a small number. any suggestions?

  You can take a look at SERVERPORTBEGIN and SERVERPORTEND
  http://download.Oracle.com/docs/CD/E17236_01/EPM.1112/esb_tech_ref/frameset.htm?serverportbegin.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Is the indicator parallel use / * + PARALLEL * / good or bad?

  Hello
  
  I am facing problem in the use of / * + PARALLEL * / hint in SQL Query took his time to run.
  
  Parallel Hint degrades performance?
  
  The FCT_TABLE Table is to have clause PARALLEL (DEGREE by DEFAULT DEFAULT INSTANCES).
  
  We use the suspicion parallel as SELECT / * + PARALLEL (FCT_TABLE 2)
  
  Any help will be necessary for me.
  
  Thanks and greetings

  Re: Using parallel Hint / * + PARALLEL * / good or bad?

  Bad news. (in production systems)

  Why? You, when you code this SQL statement with this point in development, have absolutely no idea of what the production will be like in a month. No idea what data will be. What another charging process will run. Or what will be the version of Oracle and hardware will look like.

  Yet, by coding this suspicion in the production of SQL, you claim you know. And not only that, you claim that you are in a position higher than the CBO to make an informed decision on whether to run SQL in parallel. You declare that production DBA knows his work and how to improve performance, and you have decided for them that the SQL should be run in parallel.

  Be very careful with advice in the code that lands in the production. Generally these efforts will simply cause more problems to solve problems.

  So why the parallel indicator then exist if it is so "+ bad +"?

  Very rarely (if ever) there are absolutes in software engineering. And there are exceptions where this indication can be extremely useful. But it's like a hammer in a Toolbox. You use it on the odd nail. You don't use every day to drive screws because the screwdriver is "+ hard +" to use.

• Change the Port Essbase 1423

  Hello everyone. I have a situation where our technology group is a query on port 1423 system. When this happens, it causes the Essbase (9.3.1 on Windows 32-bit) service to close. To prevent this, I need to get the port number, changed through the configuration again and by assigning a different port for EAS (running on a machine separate Linux) and Essbase.
  
  Are there other changes that I needed to do to any client connections? Doug Ware, I saw mentioned in another thread that the add-in Essbase Excel uses the same port. I should tell my users to use the "Server port:' if it is assigned to a different number of 1423?
  
  Thank you
  Robert

  You can use an Essbase.cfg file on the client to assign a different port using the AGENTPORT command, or as you said, use the : entry in the connection dialog box. There are probably other ways to do it as well.

  Edit: I can't go into too much detail here, but the 'other means' implies usually configure the routers so that the access of a particular router would get remapped port 1423 at your port of destination automatically, so all traffic from this source would be re-routed. I am tempted to ask if your COMPUTER people might use to use a different port to monitor this server, because it is likely that the source of this computer could be isolated - this would require that they remap the listener on your server.

  Long story short, that the it Department must be flexible in this story, to change production to allow a process of support remains constant is low ackwards.

• Portege R500 - configure the parser on the Port Replicator

  The system is Portege R500 with a port replicator Port MS Vista running. Port replicator has a Philips 19 "LCD monitor

  System has BEEN configured so that when the system was in the duplicator monitor 19 "inches would be active and system monitor is inactive.

  But, a few days before the following events occur, when the system is in the port replicator and its turned on screen (the one with the mobile progress indicator) Windows startup is displayed on the Port Replicator monitor, then the screen turns white and displays them on the screen on the monitor system, after entering the desktop on the monitor system.

  I live in a remote area, so I can't pop in the store of the local computer to ask for help.

  I would appreciate someone to give me some guidance as to where it configures the port replicator monitor configuration. I looked at the section Configuration screen Control Panel but it seems to be the performance of two monitors, it appears not to address the peculiarities of a laptop computer with a port replicator configuration

  Thank you

  Hello

  I have no Portege R500 but I ve used external monitor connected to my Tecra duplicator.
  Can you please tell me how you have configured previously?

  What is your external monitor set as primary monitor?

• Problems with the port replicator USB 2.0 after installing Windows XP - SP2

  Hello world

  I have a Satellite M30 742 with MS-Windows XP Professional installed. I plugged most of my external devices to him through a port replicator Toshiba USB 2.0. Everything seems to work fine until I installed Service Pack 2.

  Therefore, starting my laptop computer is an adventure to recognize random port replicator: usually four USB ports are recognized, but the ports series and parallel, keyboard and mouse ports are ignored, with a message "unknown USB device".

  Uninstalling and reinstalling, them or their drivers are a vain effort, since Windows keep ignoring them.

  However, in other occasions, they are recognized without problems (even if windows insist on installing their drivers each time that it finds, even if I have already installed a large number of times).

  Please, you have an idea to solve this problem * boring * problem?

  Thank you very much in advance,
  Ricardo.

  Hello

  what you might try is to reinstall the chipset driver because I think that the USB is connected to the chipset.

  In my opinion the Windows upgrade had changed the pilot USB from Toshiba a MS a. So the Port Replicator is not recognized all the time.

  Rudi Bye

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them