The upgrade of 10.2.0.1 32 bits to 11g Rel2 64 bit on a different server

Similar Questions

• Optiarc bd rom bc - 5500 s work stopped during the upgrade to Windows 7, Windows Vista 64-bit impossible to load the driver.

  Hello

  I use sony vaio VGN-FW290 JTH. I tried to upgrade to Windows 7 and has been invited to uninstall iTunes, Vaio Care, ATI Catalyst Install Manager, ATI Catalyst Control Center, Google Toolbar. I uninstalled it, rebooted the PC and then tried to run Windows 7 installation DVD. Then, I realized that my CD/DVD/BD does not, marked with! in the Device Manager. I tried the procedure in this forum to the http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/957a26d4-4219-4b76-8e89-2e74e6ee2a0e/. I ran SFC tool - it pointed out some problems he couldn't fix it. I tried to update to the latest drivers for the drive, but Windows says that the latest drivers are installed. The properties for the device say: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39):

  I hope someone from Microsoft or Sony can help - I think that it is catch 22 during the upgrade to Windows 7.
  Concerning
  Tomgold

  Hi tomgold,

   

  Welcome to Microsoft Answers Forums.

  This can also occur if an incorrect device driver has been installed for the DVD-ROM device.

  I suggest that you visit the DVD drive manufacturer site download the latest drivers for the drive and install on the computer and if it works. Make sure you download the Windows vista 64-bit driver.

  Device Manager error codes

  http://support.Microsoft.com/servicedesks/webcasts/wc091802/devicemgrerrcodes.htm?gssnb=1

  If the above, step fails I would suggest that you run the patch available in the link below and check if it works.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The upgrade to Windows 7 Home Premium 32 Bit for Windows 7 Ultimate 64 Bit

  Hi Gang!

  I have a laptop HP625 I want to upgrade.  There on the motherboard processor Dual-Core AMD Athlon II 9340 (2200 Mhz, 2 carrots, 2 logical processors), and I installed 8 GB of Ram.  I used the Windows Upgrade Advisor, and he indicated that he was a good fit.  Something weird or issues that I could keep in mind this clean installation of Windows 7 32 bit to Windows 7 Ultimate 64-bit?  I also use Carbonite for my backup.  Reason why I'm doing this is to allow the laptop to be able to work with higher end audio/video editing software.

  Respectfully,.

  Tim

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  You must also create a system image before migrating:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  Boot from the Windows 764 bit DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• How to restore missing zip folder after the upgrade to windows vista home premium 32-bit 7

  restore the zip folder

  Hello

  How to disable Windows Explorer folder in Windows 7 Zip folder view, see option 2
  http://www.SevenForums.com/tutorials/13619-zip-folders-enable-disable-Windows-Explorer-view.html

  ==================================

  If you need more features/functions an excellent 3rd party utility is 7-Zip - free

  7-zip - free
  http://www.7-zip.org/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Can I upgrade OLD computers XP Pro 32-bit to W7 Pro and later move the license to a new computer and 64-bit?

  I have a gob of old machines (5 years and more) running XP Pro 32-bit.  I don't want to buy new hardware when the XP support ends, so I'd just like the upgrade to windows 7 pro (probably 32 bit for some of them).  I think many of my computers will die in the next 12 to 18 months.  I would like to move the Windows 7 Pro license on new machines AND change to 64-bit at the same time without having to buy a new license of W7.

  Can someone tell me if this is possible?  Most of the machines will be 2013 Office installed.

  Thank you

  Wayne

  The key will activate one or the other (32-bit or 64-bit), but not at the same time. You get 2 DVD (s) with a version of "Retail" of Windows 7, but only 1 product key. If you want to use that key on your new machine, you must first uninstall Windows machine which has the 32-bit version of Windows installed.

  After that, you will need enable the new machine (64-bit) by phone from your key was already used to activate the PC 32 Bit.

  Also be aware that an 'Upgrade' of Windows 7 version requires that a previous version of Windows is installed and enabled. So if your new machine does not come with an earlier version of Windows pre-installed, you should consider the purchase of a 'Full' (not an ' Upgrade') of Windows 7 version.

  ========================================================

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  What's the relationship between activation and genuine Windows?
  http://Windows.Microsoft.com/en-in/Windows7/what-s-the-relationship-between-activation-and-genuine-Windows

  What is the validation, and how does it work?
  Windows 7: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=win7
  Vista: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=winvista

  Authentic Microsoft software program privacy statement
  What data is collected?
  http://Windows.Microsoft.com/en-us/Windows/genuine/privacy-statement

  J W Stuart: http://www.pagestart.com

• The upgrade in Windows Vista Home Premium to Windows 7 Ultimate

  Hello

  I HAV downloaded the ISO file following from the MSDN (en_windows_7_ultimate_with_sp1_x86_dvd_u_677460.iso) site for the upgrade from Windows Vista Home Premium 32 bit for Windows 7 Ultimate 32 bit.

  How should I now improve my OS from Windows Vista Home Premium 32 bit for Windows 7 Ultimate 32 bit.  Double-click the ISO file says that Windows cannot open the file.  How can I open the file?  Should it be converted into a .exe file.  If so, how?

  Thank you.

  A .iso file is an image of a dvd.  It is not a program or data file.  You need to burn this image on a dvd with your burning program.  Copy disc, burn to disc.  We'll then work the disc in your optical drive.

• is more able to stream video from some sites after the upgrade to Safari 10

  

  After the upgrade to 10 Safari, I can no longer stream from a certain website. Instead of playing the video stream, I'm prompted to save "player.swf" as shown above.  This problem occurs on el Capitan, and it happens on the Sierra, and it all started when I updated Safari 9.x to 10.0

  Open Safari preferences / Security tab and check the box allow Plug-ins.

  Very soon of Flash player and the plugin will be obsolete and this web page needs to change its code to HTML5.

• How can I copy files/sub-sub-sub-folders in Icloud on MacBook? Since the upgrade to Sierra, I see all of my folders in icloud but not on my Mac.  Thanks - David

  How can I copy files/sub-sub-sub-folders in Icloud on MacBook? Since the upgrade to Sierra, I see all of my folders (with documentation) in icloud but not on my Mac.  Thanks - David

  Turn off the power of optimized storage and copy the files to your Mac.

  1. Click on the Apple icon in the upper left corner of your screen.
  2. Select has about this Mac from the menu drop down.

  3. click on the tab for storage in the system information window.

  4. click on manage the...

  

  5 disable the storage element optimize.

• Since the upgrade to Sierra - my CPU runs hot

  Recently, I used the app store to upgrade my MacBook Pro for OSX Sierra.

  From this point forward - my laptop is very hot and fans constantly run like a Jet engine.

  I see this in the activity monitor:

  

  I put all my contacts to synchronize hourly, and nothing has changed before the upgrade and after.

  How can I fix it? My life of the battery is to be purged, permanently.

  Any help appreciated.

  Thank you

  Amit

  Director general of Tallyfy - cloud-based process management

  Try restarting in safe mode (hold down the SHIFT key while booting). The problem persists?

• Photos for Mac behaves VERY strangely since the upgrade to Sierra

  Hi all.

  I have improved my mid 2010 MacBook Pro for macOS Sierra September 21.

  The first time I launched the Photos app after the upgrade, I got the usual message on photo library updated, but when that reaches 100%, I noticed that he was missing a large number of thumbnails in my library. The photos in question were display in miniature (or 'moments') view as pale gray rectangles with a cloud icon in their breast.

  I don't immediately panic, because I assumed that they would gradually repopulate for a little while. I got "Storage optimize Mac", the value of preferences so all of my original pictures must be in iCloud. I have a Time Capsule, make automatic backups, and I made a backup Time Machine on which, immediately before the upgrade, so I am reasonably confident that I did not really lose my photos, (and all of my pictures and their thumbnails are present & correct on my iPhone).

  But, almost a fortnight after the upgrade, most of my thumb nails is always reported missing since the Photos of Mac application, which makes it very difficult to find pictures of course.

  Last night I noticed that the Photos app showed 'Uploading photos 10 985 nnnnnn' at the foot of the view of the times, with the first digit decreases slowly, so I disabled the options to ensure that my Mac doesn't go to sleep and I let it run until the download was complete energy saving. Then, he showed "updated... "at the foot of the view of the times for a while.

  I was hoping that my thumb nail would be back after that, but they are not!

  It seems that the Photos app is not sync with my iCloud storage, for any reason, or at least if it does not in fact what it has synchronized.

  A double click on these thumbnails blank to open the photo is not consistent either. On some that I try to open, they do not open, and when I return to the thumbnail display the thumbnail is now also. But on others I try to open I just see a completely white area where the photo should be. However (and this is really weird!) when I return to the thumbnail display after those I see very very briefly the photos as they will shrink to the size of the thumbnail, and then they are virgins thumbnails with clouds still...

  I wonder if I should change the preference of Photos of 'optimization of storage' to 'download the originals' in an effort to recover my thumb nails. It seems that I have almost 62 GB of free space on my Mac, and my Gallery of photos shows that there are currently 31GB. Or do I have to re - install the Photos app? (Is it possible?)

  Or is there a better solution to the problem please?

  Thank you for all the helpful tips.

  Post edited by: Steve Zodiac: grammar Correction.

  try to turn a thumbi = nail and reotating back - if it suits it you can do so for groups of up to about 1000 photos at once to correct quickly - how rebuild thumbnails in a photo library

  LN

• Difficulties with all versions of html files since the upgrade of the Sierra

  I have problems opening and dealing with htm, html, html5 files since the upgrade of the Sierra.  Someone else?

  Please provide details. What problems are you having? HTML files open in a web browser, the browser you are using?

• Random OS freeze or crash after the Upgrade of the Sierra

  Since the upgrade to Sierra, I started experiencing random freezes or crashes, the operating system.

  In general, I keep the mouse control (connected via trackpad), for at least a certain period of time. However, only the movement is possible - applications cannot be selected, there is no reaction to the clicks, etc. Attempts to pass via cmd + tab don't produce no result.

  I tried waiting for the system to respond. She finally slept, then crashed with a wake on the lack of sleep.

  The other answer is a hard reset by holding down the power until button a restart is forced.

  I ran disk in rescue mode utility, and he reported no problems with the disk. I've yet to try some of the more esoteric answers as reset NVRAM and so on... which is probably intended. I saw a report that said this problem was happening with El Capitan, and there is no resolution. I don't know if it's the same problem carried over, or a new.

  I got exactly the same problem you describe, on an iMac of retina of 2014. I've updated all non - App Store applications I have thought (and removed dozens of them), disabled launch points, unplugged my USB hub, downloaded EtreCheck (very useful application, incidentally) and road to combing through reports in the Library/Logs folder. On a Reddit thread on the problems with the Macs wake from sleep after installation of Sierra, someone suggested using the following command in a Terminal: kextstat | grep - v com.apple

  The command shows you what non-Apple kernel extensions are running in the background. Extensions of core apps such as Airparrot, strap, and duo caused problems with macOS Sierra. In my case, officer was running a kernel extension - then I deleted this app and went through my library/LaunchAgents and records of the library/LaunchDaemon, remove all items launch left by home and others deleted apps.

  EtreCheck reports said that so-called SIMBL caused several accidents. So I got rid of this, by following the instructions on the site SIMBL.

  Here's the problem: even after all these efforts (and each variant reset, I could think of) troubleshooting, nothing has changed. My Mac always has exactly the symptoms you describe, upon awakening from sleep. Every time.

  In the end I just gave up and restored my iMac to its State, 4 days ago in a backup using Time Machine. (It took 12 hours). With Dropbox, I didn't lose all of the work I've done in the meantime. So, I am now running a stable El Capitan, with an understanding to why people wait a few months before installing the latest OS updates.

  Sorry I can't offer more useful troubleshooting options - but perhaps some things that did not help me could help you anyway? Thanks for posting: it seems that the Sierra has been a pretty smooth update for most people, so I guess we're just out of luck?

• After the upgrade to sierra, shutdown is extremely slow

  stop takes about 5 to 7 minutes. Screen will Dim, computer does not respond, but the stop takes 5-7 minutes. In the system log, no problems are reported.

  I closed all the software running before shutdown (clamx-av, dropbox, owncloud), but no difference.

  Hi rmschaefer,

  Thanks for the upgrade to Mac OS Sierra! Looks like your Mac takes a bit longer at the right stop. Great way to make sure that all applications are closed before you stop. You can try to check your Mac logs or startup items. Your item journal are applications that run as soon as you start up your Mac. They can run in the background continuously slow down your machine. Sierra macOS: If you think you have incompatible connection points

  You can also check to see how much disk space you have on your Mac. With Mac OS Sierra, you can release and optimize your disk without effort space to allow your Mac to run to its full potential!  Information System for Mac: optimization of the storage on your Mac

  If the release of disk space on your Mac and the removal of the login items not solve the problem, try to start the Mac in Mode safe.  Try safe mode if your Mac does not start-up
  
  

  What is safe mode?

  Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. From your Mac in safe mode does the following:
  Check your startup disk and attempts to fix problems if necessary directory
  Loads needed kernel extensions only
  Prevents elements start and the login items open automatically
  Disables the user installed fonts
  Delete font caches, hiding the kernel and other files of the system cache
  Together, these changes can help resolve or isolate issues related to your startup disk.

  These measures should have your Mac off normally as expected and the Mac OS Sierra also runs fluid it is supposed to. Please use the Apple Support communities to post your question.
  Good day.

• Cannot move photos to the computer after the upgrade to iOS10

  Yesterday my iPhone updated to iOS 10 and now when I plug my phone into my PC (HP m6w103-dx / Windows 10 / iTunes 12.5.1.21) the computer will ba - beep once iTunes sync, charge the phone but I no longer have access to the photos via Windows Explorer folder.  The phone does not appear in Windows Explorer and I don't get the second ba - beep that normally, I had before the upgrade.

  I restarted the phone and the computer, then tried again with no luck.  I myself have sent pictures that were on my phone, deleted all of them film, then took some new pictures and tried again.  Still no luck.  Help!

  Your post is the 4th now ask about the same problem. One user solves the problem by connecting the phone to a different USB port on the computer. You might want to try it.

• Cannot connect to more than one mail account after the upgrade to Sierra

  I have several provided ISP e-mail accounts that work successfully for a long time on elCapitan.  After the upgrade to Sierra this afternoon cannot connect all accounts and I asks me to enter the password.  Why isn't Sierra pick up the passwords of my trousseau?

  Oddly enough, my Hotmail account seems to be ok.

  How can I fix this without having to re - enter all passwords?

  As a result of the foregoing, I found that my connection Keyring contains entries for all of my email accounts.  However, these dates are back in July 2011.

  After an episode of lost or stolen iphone, I had to update all of my passwords by e-mail in February this year (2016).

  Search in my keychain, I found dated entries for my email accounts in iCloud Keychain section.  I don't think that I never activated iCloud for my email.

  How the entires of e-mail account eventually sub iCloud and why the old entries from email account not updated?