The VAIO's biometric fingerprint reader USB error

Similar Questions

• Not to recognize fingerprints after the transfer of drive fingerprint reader

  Having transferred all my hard drive from one computer to an identical due to a broken screen, my password of fingerprints is no longer recognized.

  The hard drive and motherboard were transferred to the new computer, resulting in a new either not recognize the administrator password. Using a downloaded software, all typed passwords have been cleaned, allowing the opening of session. Fingerprint reader recognizes again there is a password for fingerprints of all the files, I had digital-Word prints of past - protected, but he can't seem to match my fingerprint to the password.

  Is it possible to reset the password of fingerprints without a backup password (as there's none now) or have the computer match fingerprints?

  Hello

  1. Is - this Microsoft Fingerprint Reader installed on your computer?
  2. Who is the manufacturer of the computer and was the fingerprint reader provided by the manufacturer?

  Method 1:
  Reinstall the drivers for the chipset on the computer. Use the disc that came with the motherboard to install drivers or visit the manufacturer's Web site and download the drivers.

   
  Method 2:
  See the link below and follow the steps.
   
  How to add, change, or remove a fingerprint logon by using the Fingerprint Logon Manager for use with the fingerprint reader digital http://support.microsoft.com/kb/899626
   
  You can read the article on the Web page that the link is given below
  How to clean and maintain your Microsoft Fingerprint Reader http://support.microsoft.com/kb/894036 device

• Readings of fingerprint reader, gives error message

  
  

  I've deleted all my old footprints by pressing "remove all" in the program, and it worked. Also check your settings in the software of fingerprint.

• Unable to connect: icon disappear the password incorrect message/fingerprint reader

  I am unable to log in to my administrator account with my password or fingerprint after the last HP Simplepass update. When I try the password, I get the message 'invalid password' and I can't use the scanner as its icon dissappeared. I can still connect to the guest account, but this is not the administrator settings.
  After you restart the computer several times nothing has changed.

  It is a HP Pavilion dv7 Notebook PC Windows 7 Home Premium 64-bit Service Pack 1.

  Any help would be really appreciated.

  Thank you.

  Hello

  See if you can access the computer in Mode safe mode as follows.

  Shut down the laptop. Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.

  If you can access your Admin account in this mode, click on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point prior to the update SimplePass and then proceed to the restoration.  When you are finished, Windows will restart normally.  See if your scan/finger/password original works now.

  Kind regards

  DP - K

• where can I find the drivers for a fingerprint reader?

  is

  If you know the brand and model of the finger print scanner, navigate to the windows Compatibility Center in the link below and enter it in the search field and in general, if you need to download additional software, a link will be provided to the support page for your device.

  http://www.Microsoft.com/en-us/Windows/compatibility/en-us/CompatCenter/home/

• And fingerprint reader UPEK Protector Suite problems

  I have a laptop of VGZ-Z590 series. I tried to update my program Protector Suite and driver to support a newer version of Firefox. After several hours of frustration, I lost all the features of the fingerprint reader. Nothing of what I'm doing, including roll using the system restore works.

  I downloaded the drivers for Win7 and good program from the eSupport site. When I install it, it seems to have completed since I get the message "Completed" in the program. After I finished, I get a Windows error install saying it didn't install properly!

  Someone had a little luck upgrading the Z Series notebook to the latest version of the drivers UPEK and Protector Suite software? Are there special methods or tricks I have to respect?

  Please, any help would be greatly appreciated.

  go to in 1122 Sony USB
  Friday, January 7, 2011 16:50

  Forum: VAIO Care & VAIO Update
  Topic: Error the VAIO's biometric fingerprint reader USB

• drivers for the Windows Fingerprint Reader 7

  I reinstalled the 32-bit version of windows 7 on my HP pavilion dv6565ca computer (product number: gl980ua) but I lost the appropriate drivers for the Authentec, Inc. AES2501 fingerprint sensor fingerprint reader, before it worked but now personal Digitalpersonna (updated recently) 4.11 program can't detect not the fingerprint reader, the logo appears on the logon screen , but the device is not detected.

  Can someone give me the link to download the correct drivers? I can't find.

  I finally solved this problem by contacting the manufacturer of my fingerprint reader Authentec, he gave me the link to download HP SimplePass (in lieu of DigitalPersona) and the appropriate driver and now it works perfectly.

  PROBLEM SOLVED!

  http://support.AuthenTec.com/home.aspx

• HP ENVY 17 Notebook PC TS: Fingerprint Reader driver issues

  Before I upgraded to WIndows 10 my fingerprint reader work properly.  I used it to connect to the laptop.  After the 10 Windows, upgrade and update of my first Norton 360 to a compatible version of windows 10 I got an error in for the fingerprint reader device manager.  I uninstalled the driver (Device Manager said that the registry entries have been corrupted).  After four hours of trying to find the right driver on the HP site, I was able to install validity sensor Driver version 4.4.232.0 dated dated 18/08/12, which recognizes the device.  However, it now under the tab ' events/information"error message:"USB\VID_138A & PID_0050\2012482178ab device still requires the installation."

  The fingerprint reader is completely ineffective: no lights at startup.

  I'd appreciate any help anyone could offer to solve this problem.  The fingerprint reader is a nice feature.

  Thank you

  Bill

  Hello @Bill38,

  Thanks for the quick response!

  Have you tried to find the drivers for you fingerprint reader, using the link above?  You can also use Windows Updateto search for the drivers that are compatible with Windows 10.

  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  Please consult the following document as well and let me know if this can help:

  HP Notebook PC - a (Windows 8) fingerprint reader troubleshooting

  I hope this helps.

  Kind regards!

• X201T fingerprint reader not scan

  Trying to put his fingerprints on my new X201T.  Each test, each finger - same results: green LED light scanner at the beginning, but after scanning my fingerprints, the orange LED blinks 3 times, and reported 'bad quality '.  I used scans of fingerprints on many laptops before - so I don't * think * I do this completely in back or something.

  I installed the new program to fingerprint reader (5.9.3, build 6264) the ThinkVantage System Update utility. Same results.

  Driver Manager shows "coprocessor (WBF advanced mode) digital footprints TouchChip" installed & working properly. He said that the latest drivers are installed.

  A possible problem - I occasionally get an error message saying "USB device not recognized - one of the devices attached to this computer has malfunctioned...". ». Shows Device Manager then an unknown device in the concentrator root (3 ports) USB / generic (6 ports) USB hub.  Is this something related to the fingerprint reader? Am I missing some device driver?

  Thanks for your suggestions...

  EDIT: I forgot to add - Professional Win7 64-bit, as installed Lenovo.

  My new x201T has finally - a working fingerprint reader!  Here's the scoop on getting this problem - the part which had to be replaced was part of the plastic screen, which also contains the fingerprint reader. According to Lenovo, the x200T both the x201T share the same exact part for the bezel of the screen number. But there are in fact two major differences:

  (1) x200T uses an AuthenTek fingerprint reader, x201T uses one of UPEK Inc. They have different connection cables.

  (2) the screen bezel x200T of course SAY 'x 200 Tablet' on this subject - maybe not a big deal, but I don't want the last year my x201T model # clearly on it!

  So now I have a screen bezel x200T & transplanted successfully into my fingerprint reader x201T!  Bravo for the on-site technician who understood all this after only two previous lost 30 miles out at my house. He ended up having to replace a cable additional x201T with the old version of x200T, to make everything work. We also had to install the drivers of different devices, as the fingerprint reader x200T is a manufacturer of completely different from the x201T.

  He also managed to carefully replace the sticker "x 200 tablet" of the new scope with that of my original unit, who said correctly 'x 201 Tablet '.

  Again - it has been a very frustrating experience. I don't understand why Lenovo is not a good new screen bezel with the correct new fingerprint for the x201T reader.  It should not require a creative technician find a way to hack the x200T spare parts to work in the x201T!

• X 60 fingerprints fingerprint reader driver

  Hello gurus,

  I installed Win7 RC on my X 60 and all is well.

  My colleague mentioned that Win7 has native support for the use of a fingerprint reader, and I would try it rather than using the Lenovo Client Security Solution.

  I have a clean Device Manager now except for the "biometric" coprocessor, which I suppose is the fingerprint reader.

  No idea how I can get the driver for it?

  Thank you

  -Michael

  You can get the driver here: http://www.upek.com/support/downloads/windows7/learnmorew7.asp

• (SimplePass) fingerprint reader does not work or missing? (Windows 8)

  Hey guys,.

  I see many people running on the issues where he fingerprint reader does not work after the upgrade. Most of these problems come from the books that is not supported by Windows 8.

  If you run a question using biometric (fingerprint reader) missing or does not work to all install IT.

   

  

   

  THX

  Hope it will be useful.

  THX

• T500 in edition of Windows 7 fingerprint reader

  I recently installed Windows 7 x 64, everything was fine, except that when I disconnect / lock / watches the computer and I have try to log in using the fingerprint reader, I get the following error message: "this computer is locked. Only the connected user can unlock.

  But I am logged on (assuming that wasn't there one, after disconnection,...), administrator and user only.

  So to connect, I just enter the password and everything works, but in Vista, it worked without problem.

  When I start or restart the computer, I have no problems, the works of great fingerprint reader (in the bios and the part of Windows logon).

  Got most of the drivers through Thinkvantage System Update, but had to get the drivers of the fingerprint on the Lenovo site, released 10/22 version 3.3.0.56 (original and official version for Win7)

  Any solution to this?

  Thank you!

  Yes. You are right. The previous data fingerprint (XP or Vista) still exists in the sensor even after you format the HARD drive and instatll a new OS Win7. Then you'd better delete fingerprint sensor once from the BIOS > Security > Fingerprint > internal Reset data before installing a new OS fingerprints.

  I am fan of ThinkPad and Lenovo volunteer. FOR INFO.

• The best equipment of fingerprint recognition?

  Hello.

  I am trying to create a LabView VI that will acquire and process a fingerprint image.

  I have trouble choosing the material best suited for the acquisition.

  Throughout the research process, I found some information on the microsoft fingerprint reader.

  However, I'm wondering if the acquisition of fingerprints would be possible with other types of material, such as the webcam or the different with a fingerprint reader approach easier.

  Thank you.

  OC

  Dear CB,.

  A monochrome camera and the monochromatic light source would be preferable to a web camera to assemble a fingerprint reader.  True, it's the optics, which are used not the camera.  There is a document describing the various techniques used to fingerprints image located at http://ewkmmc.tuwien.ac.at/wkmp/fileadmin/user_upload/lehre/rp/ss2007/gr1_SFF.pdf.  Note: the tree of FTIR scanners are often coated with silicone.

  However, we turn off fingerprint scanners digital tablet that can be integrated with the products, OR, for example http://www.solkey.com/Technology%20Vendors/Cross%20Match/Verifier/CMT_verifier_300_RS170.htm.  Here, the video output RS-170 of the scanner can be acquired via a framegrabber NI PCI-1405.

  -Robert Eastlund

• Digital Persona fingerprint reader

  I have a HDX 18 t. It came with windows vista x 64 and I have upgraded to windows 7 x 64. After the upgrade the integrated digital persona fingerprint reader is no longer in effect. The fingerprint reader is not detected. I tried to uninstall, reinstall and update the drivers. Currently, I have the latest version of the software for the installed fingerprint (4.11.3826) reader. The icon for the fingerprint reader has 'x' on it which indicates that the drive is not detected.

  I've already sent to the post:

  http://h30434.www3.HP.com/T5/operating-systems-and-software/DigitalPersona-validity-fingerprint-and-...

  I followed the instructions for part A on install fingerprint driver digital validity and the DigitalPersona Personal software. However, after my computer restarted, a message appeared and said: "the fingerprint reader could not be detected. Reinstall it using the recovery of applications and drivers disk provided with your system. »

  Previously, I tried unistalling digital persona completely and reinstall it from the driver and application recovery disk. However, this does not work any more.

  I think the recovery disk does not work because it was made for windows vista. The only way (at least AFAIK), I was able to successfully use this disc would be to reinstall vista and then reinstall the driver and application recovery disk. However I would no longer have windows 7 which I've already paid for.

  I also tried to contact Digital Persona about the issue online, I had no great success however.

  If someone can tell me at least who can help me, I would be very happy. I tried several different solutions many times, and it becomes frustrating. I just want to use the fingerprint reader that's installed in my computer. I want to keep windows 7, so I won't downgrade for the fingerprint reader. This problem persisted for several months now and I want to be treated.

  I have enough confidence in my computer skills to be able to follow the instructions given for me online, but I am not above having a technician help me. So if it's necessary I would force quickly. The only thing I want to avoid shipping my computer anywhere since I use everyday to school.

  I apologize for the length of the post. Any suggestions would be greatly appreciated, thank you.

  After many days a lot of work, I finally found the solution for VFS301 of a validity sensor works with Digital Persona on Win 7 64 bit because it is supposed to.

  NOT the drivers INSTALL WBF all sites or drivermax... These drivers allow only logging in Win7 and no website, sign in.

  (1) first of all UNINSTALL all software and the DDK (Driver validity)...

  Make sure that also go to the control panel =>-online Validity Sensor Device Manager

  UNINSTALL the sensor and check "erase the software driver for this device.

  (2) then make sure you REBOOT

  (3) DOWNLOAD and install validity of HP drivers

  FTP://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48509.exe

  (4) REBOOT AGAIN... it is important

  (5) Download Digital Persona worm 4.11.3805 the link below

  http://d11tvxmfjhi64o.CloudFront.net/x64/Setup.exe

  (This file is taken from)

  http://Forum.NotebookReview.com/HP-Compaq-Voodoo-PC/404164-drivers-HP-DV6-Gen-2-dv7-Gen-3-DV8-HDX16-HDX18-Intel.html)

  (6) RUN the Setup.exe

  When it asks to install the driver for the fingerprint reader (the first dialog box you get when you run setup.exe)

  DO NOT click on INSTALL

  Let the installation window because it is...

  (7) open the Explorer windows by pressing win + E

  8) go to

  \AppData\Local\Temp\usernameC:\Users\

  Click the "Update" column to sort the latest updated files first in the list

  You will have a folder with {05B54AFA-28C6-4FED-A0E6-3F235641DA1D}<============= example="" only="" it="" will="" be="" different="" on="" your="">

  Go to the folder and you will see some ini files with a file named 'drivers.prq fingerprint reader.

  Open "fingerprint reader drivers.prq" in notepad.exe

  Delete all lines of text in the file 'fingerprint reader drivers.prq' and save the empty file.

  (9) back to the Digital Persona installation dialog box referred to in point 6

  Now, click on INSTALL and let it install the software

  He will open the same file again and continue with the installation...

  When it asks to RESTART, click YES

  (10) after the REBOOT, the fingerprint reader works without a hitch.

  DON'T FORGET THE CONGRATULATIONS IF MY SOLUTION FIXED YOUR PROBLEM

• Windows 7 & MS keyboard with fingerprint reader

  Hi - running Win7 Ultimate - clean install - I have the Microsoft keyboard with fingerprint reader - anyone know if this is supported (fingerprint reader that is - not only the keyboard) and if not, MS have plans to support it and when?

  Mike

  Thanks for your reply. I am running 32-bit. IntelliPoint s/w is available for the item of keyboard, but just what is fingerprint reader (which requires the persona digital s/w) is not supported under win7. I refer to my question above - does anyone have an idea if MS will support it in the near future or the product of by MS fingerprint reader is a lost cause.

  AFAIK, there is no intention to provide the software for this device for Windows 7.  For more information, you can try to contact the number here:

  http://www.Microsoft.com/hardware/support/FingerprintReader.mspx

  Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.