The WinImage application file has stopped working
I'm trying to access some files from a PC full .vhd file on my external hard drive backup. I tried to use Virtual Server, but can't see all of the files. When I tried WInImage, I could 'see' the files I wanted access (users - my documents), but then the program stopped working and gave me the message "file application WinImage has stopped working." What else can I do to access these files? I am running Vista Ultimate 64-bit. Thank you
So the only way I can think is to expand the VHD file first and then out the files. Otherwise, you are only viewing.
There could be some good info here.
http://www.SevenForums.com/tutorials/24771-system-image-extract-files-using-disk-management.html
It's maybe more with. WIM files, but can be a useful look.
Mark <> Microsoft Partner
Tags: Windows
Similar Questions
-
"Description TODO:File has stopped working" is often highlighted on the screen. Send a solution.
Hi Ezel,
1. When did you start to question?
2. did you of recent changes on the system?
You can try to perform a clean boot and see if it helps.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
Hope this information is useful.
-
When I try to open the games on my Windows 7 system, I get the executable file to the games error message has stopped working. I tried several times to load the games following the indications for help but the games is not accessible. My computer is a remanufactured unit that was on the lease are there steps I can take to solve problems? Thank you
Original title: frustrated in New York
The problem seems to be the igdumd64.dll:
Fault Module name: igdumd64.dll
Fault Module Version: 8.15.10.1749
Timestamp of Module error: 4a5bdf54The igdumd64.dll is a component of the Intel graphics driver and seems to be an older version then try to update the graphic driver Intel.
You could try the manufacturer of the computer for an updated driver, or use the following utility for intel to check a generic version:
-
Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code. This has happened for days. I am running windows 7.
I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.
We will cover all the possibilities.
1. download each of the tools for deletion below, save it to your desktop:
Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)
IMPORTANT! => Activate the Windows Firewall immediately after the restart.
IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!
4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.
5. Repeat step #4 for another removal tool.
Tips:
-Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.
-Online start the problem in Mode safe computer, if necessary, proceed as above.
-Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.
Why you don't need your anti-virus to scan your email
http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm-Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Replacement for the preview handler host has stopped working
When creating a shortcut which connect to the network share. It can connect to get the file and it will have the following error message:
Replacement for the preview handler host has stopped working
Signature of the problem:
Problem event name: APPCRASH
Application name: prevhost.exe
Application version: 6.1.7600.16385
Application timestamp: 4a5bc5ca
Fault Module name: hooknt.dll
Fault Module Version: 1.52.0.0
Timestamp of Module error: 49a 20833
Exception code: c0000005
Exception offset: 0000b 951
OS version: 6.1.7600.2.0.0.256.48
Locale ID: 3081
Additional information 1: 0a9e
More information 2: 0a9e372d3b4ad19135b953a78882e789
Additional information 3: 0a9e
Additional information 4: 0a9e372d3b4ad19135b953a78882e789Does anyone know how to avoid it?
Hi Ivan 2008,
You can try the network drive mapping & check if it helps.
Create a shortcut to (map) a network drive
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Bootstrapper.exe has stopped working!
Hello! I try to update my Garmin GPS and have saved the program on my desktop. When I open it, the program retrieves and then I get the message: "Bootstrapper.exe has stopped working".
I searched the internet and forums of Microsoft for answers, but I don't know why this is happening. I followed an instruction in the forum by changing the setting of the DEP to just windows and programs and do not apply to ALL. I restarted my computer and I tried to rerun the Garmin update. I got the message again. Y at - it somewhere on Microsoft where you can download just the ' Bootstrapper.exe by itself?
All the updates of Windows and Microsoft are up to date. I am running Windows Vista Home Premium, 32 bit, pack svc 1 & 2. Could someone help me please? I'm pretty knowledgeable with computers, but it frustrated me no end.
Thanking you in advance,
stillcrazyat49
Hello
1. have you made changes to the computer recently?
2. the program is already running while update you?
3. where did you download this update?Method 1.
I ask you to re - download the update and then try to install it. Its possible this bootstrapper is damaged. If the problem persists, then put the computer in a clean boot state, and then try to update.
May be a third party application is causing the conflict.
See the article below for instructions on how to start your computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
Method 2.
If the problem persists, it is recommended to contact Garmin support and check.
http://www.Garmin.com/Garmin/CMS/site/us/support/I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working
Hello
· Faced with this problem specific to uninstalling the application with the printer, or with another application?
· What is the brand and model of the printer?
You can follow the method below and check if it helps.
Method 1:
I would say as you put your computer in a clean boot state and check if it works.
How to troubleshoot a problem by performing a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.
Method 2:
I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.
http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program
Hope this helps,
-
In Windows 7, the message "Windows Explorer has stopped working" on a daily basis
My hard drive on my Dell E5420 died in November, and I had to get a new one and reinstall everything. Since I was doing a Windows Exporer has stopped working message on a daily basis. It seems not to be any rhyme or reason to when it occurs. The details of the problem are below...
DescriptionApplication of vulnerabilities path: C:\Windows\explorer.exeSignature of the problemProblem event name: APPCRASHApplication name: explorer.exeApplication version: 6.1.7601.17567Application timestamp: 4d672ee4Fault Module name: StackHash_1062Fault Module Version: 6.1.7601.17725Timestamp of Module error: 4ec4aa8eException code: c0000374Exception offset: 00000000000c40f2OS version: 6.1.7601.2.1.0.256.48Locale ID: 1033Information additional 1:1062More information 2: 10627f8784ab27b0a288ca8932b959113 more information: 01fbAdditional information 4: 01fbd1f85968f86da1c3a5e6eaa045ccAdditional information about the problemBucket ID: 57749939Hello
Welcome to the Microsoft community. According to the description of the problem you get the message "Windows Explorer has stopped working" on a daily basis.
I'll help you with this problem. I suggest you follow the steps in the article.
Explorer Windows stopped working
Note: After completing the steps in the clean boot troubleshooting, follow the article How do I reset the computer to start as usual after a clean boot troubleshooting section to start the computer to a Normal startupmode.
Error: Windows Explorer has stopped working
Note: You must take the backup of the data before performing any installation of windows.
I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.
-
Manager application Adobe has stopped working
A few days ago, Acrobat Professional XI decided it would not start. I have uninstalled, reinstalled, but I get the same behavior. Specifically, "Adobe Application Manager has stopped working - windows can check online...» "Details of the problem are
How can I solve this?
Although Adobe proclaims their commitment to customer support, there don't seem to be a way to communicate with them to try to work through this, other than this forum. No phones. no emails. No cat.
Hey stephenp36835709,
We're really sorry for the inconvenience posed for you.
You can access the below mentioned link to download the latest version of Adobe Application Manager and install:
Adobe - Adobe Application Manager: for Windows: Adobe Application Manager
Let me know if it helps.
Kind regards
Ana Maria
-
Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?
Hi Andy,.
I checked the reported compatibility list, and the game is listed as compatible. Work in 64-bit or 32-bit Windows 7? I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently. If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem. Let me know if you've done all that and you still have questions, and we can try something else.
Kevin
-
"the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150, especially when I run 3d games or install Skype 5 and start on this video than the above message appears please advise solution and oblidge. Thank you
First of all, you're not telling the forum what version of Windows, edition and service pack level your system is running. Please do.
Secondly, there is no describe your system. Tell us who makes your system and its model, if a packaged system. If not packed, please tell us who manufactured your motherboard and model. If your video card is another box and not originally shipped with the system, please tell us the manufacturer and model of the adapter.
Finally and most importantly, please read 555375 Microsoft Knowledge base article, how to ask a question.
Now, in general, unless your system has a card mother Intel®, you do not want to download an updated directly from Intel® driver. If there is a system, you will want to download an update of the driver support from the manufacturer of your system model site. If not packed, see web site for support of the manufacturer of the motherboard for your updated driver model. If this isn't the case, a card mother Intel®, the reason for the not to load the Intel® GMA 3150 drivers from the web site Intel® is that there may be unhandled in the Inte® base drivers implementation changes. Nor should download the drivers through Windows Update, except as a last resort. If Windows Update contains an updated driver, check you motherboard of the system/website of the manufacturer for updates. Be aware that some manufacturers/motherboard of the system (e.g. Dell) don't feel any economic incentive to keep the drivers/firmware to update if a motherboard system was abandoned.
No member of this forum is omniscient! Provide complete information leads directly to all the answers!
-
I have a message on the screen indicating the dell support center has stopped working how can I solve this problem
Hello
as you have problems with the Dell software, contact Dell
Dell support at the link above.
http://en.community.Dell.com/support-forums/default.aspx
or ask in the Forums of Dell Support
-
I get the message: HP Advisor has stopped working. I have Vista 32 bit service pack 2
I get the message: HP Advisor has stopped working. I have Vista 32 bit service pack 2
Hello
Contact HP support because it is their software problem
http://welcome.HP.com/country/us/en/contact_us.html
or ask in the Forums of HP Support
-
After you have installed the Rosetta Stone, the Windows Control Panel has stopped working
After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd
After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd
Hey dododododo5
you would like to check the exact version of the Rosetta stone that you try to use the vista Compatibility Center in the microsoft link below
Rosetta stone version come as being incompatible with vista in the below link vista Compatibility Center
If necessary, read the action recommended in the link below microsoft
If your version of the Rosetta Stone is incompatible vista you can try to install as it is shown in the link below compatibility mode
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
Walter, the time zone traveller
-
Hi, I'm on a PC running windows 10. I just started using Lightroom CC and wildfire and feature drop for the sorting of the pictures in collections has stopped working. can someone suggest something please?
Your catalog backup and reset the preferences as mentioned wobertc
Press the shift and Option on Mac, or the shift and Alt PC (windows) keys. Select Reset preferences
~ Assani
Maybe you are looking for
-
How to look at a vertical to horizontal
My new 6 iPhone will switch from vertical to horizontal, and I can't find anything in the settings to change that. What should I do?
-
I have these processes running several times, is this normal
-
Password BIOS reset for HP mini 1000
Stop code: CNU9293LFW
-
Problem of DNS with AnyConnect on SAA
/ * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" ms