Time to repair guaranteed in Poland

Similar Questions

• recommend a repair guarantee in Los Angeles shop?

  Looks like I have a bad system board in my W510 and needed to be repaired. The helpline said drop and it'll be a tour of 5 days around. But I do all my work via my computer and can't go 5 days without it. So they said I could take it to a repair shop in my area. I live in the 90026 Los Angeles region. Anyone know of a store that they can recommend?

  THX, jayson

  Jayson, pays just to add on the site of service for your warranty and save you the trouble of dealing with a service center. Lenovo will send a tech the next day wherever you are, and you can sit there and watch repair it. Don't let not the technology until the machine works to your satisfaction. Run a video in full screen or a video game for a few minutes to make sure that the machine is not overheating (during the replacement of a card mother, there is always a possibility that technology will not rise properly heat sinks or bend, which will cause overheating, which is particularly critical with the W510).

  Otherwise, if there is a problem with a repair service center, you can spend days of back and forth with them to remedy. And in all cases, remember to back up your hard drive before letting someone touch the machine, especially if you send it to a service center.

  If your time is worth money, on-site service is a bargain.

  Good luck!

• Time of repair and status

  I sent my TX for repair on 9 October.  As web status is not updated, I tried the cat and the voice of support.  They tell me it was received on 15 October and I should have this return in 7 to 10 days.  Since this time, cat support told me that voice should be able to give me some detailed info.  Voice support say they can tell me nothing buthe date of receipt and that it must be returned "in the coming days."  Is it possible to know what happened to my camera?

  Please send me a private message with your service repair order number and a phone number right to communicate with you and a good time to reach you.

  Thank you.

  Message relates to: Centro (Sprint)

• reasonable time to repair

  DV4-1220us my daughter is in a store that has high reputations, including a + BBB score. I took this shop because there is no warrity on his cell phone.  Today the store called and told us that the cooling fan is stuck and had to be replaced.  In addition, thermal plate must be replaced as well.  The quote, they gave us includes the work of 2 hours.

  Several friends told me that they do not have bleieve it take over an hour to do this work.  I'm NOT able to find out what is a reasonable working time for these replacements on DV4-1220us.  Anyone has any info on what can be verified?

  Thank you

  Lee

  I want you to know that I found a very convincing video in YouTube in which a tech began early on, stripped to the motherboard (taking all the way) replaced the motherboard and put it back together to turn on the laptop, total length less than 48 minutes.  The technology was not rushed in the video and he took the time to show us this and that, as he explained.

  The way I see it, if fan and themeral cooling plate is screwed to the motherboard, it must be done within the time directed by the video...  I hope that the tech will charge me an hour, no not two cited.

• I do a repair system EACH time disc that I perform an Image backup system?

  I do one every time system repair disc I perform an Image backup system?

  (Win7 Ultimate 32-bit SP1)

  Thank you.

  Craig, AMTELCO

  P.S. I really did a lot of digging before asking. While I picked up some useful tips in the case, I do simply not the connection.

  The Windows repair CD is designed to put you in an environment where you can perform these functions:

  • Perform a system restore.
  • Perform a restore of the Image.
  • Open a command prompt.
  • Repair the boot environment.

  All these functions are independent of service packs or updates. It is, therefore, no need to update your repair CD. Also note that an installation of Windows 7 DVD can be used as a Windows repair DVD. Again once he doesn't have any need to update.

• Warranty repair after

  Hello

  Really, just a little doubt. I bought my Toshiba Satellite Pro some time in early July 2008. Since then, I had two repairs guaranteed made in this regard. Since the second repair the socket where you plug the AC charger into the laptop itself has come loose. I have a big problem: http://www.insidemylaptop.com/problem-with-power-socket-toshiba-satellite-l305-l305d-l355-l355d/

  Obviously, that my warranty of one year has elapsed, I am not eligible for free repairs on this subject. However, I was wondering if anyone knows how long repairs are guaranteed. It is 30 days or 90 days or what? I'm a little less the impression that this damage had occurred as a result of the last repair and I would be interested to know if I get another free repair.

  Thank you in advance for your help!

  Steve

  I also think that you gat 90 days warranty on parts replaced, but you should contact ASP and explain the situation.
  Be cool and talk with them about the normal way, not to mention any tension.

  Friend of mine had the similar problem and after the conversation with the technicians, they contacted Toshiba Toshiba approved free repair. So, if it is serious problem try again enlighten with ASP.

• Disk error backup external hard Time machine

  Hello
  While that hurry to catch a flight, I accidentally disconnected my external hard drive (which I use for time machine backups) before ejecting.  Now the House, the time machine backup does not recognize my external hard drive.  I went into disk utility to try to repair the disk.  Here's what he said:

  
  

  Verification and repair card partition for "Time Machine external HDD ' Verification of prerequisitesChecking map of partition partition listAdjusting to adapt to any disk as a requiredChecking for a partitionChecking of the system EFI sizeChecking of the system partition EFI systemChecking of file system EFI the EFI folder of the system partition contentChecking partition data HFS charger spacesChecking boot partitionsReviewing support loadersChecking Core Volume physical storage partitionsUpdating Windows boot.ini boot files of score as card requiredThe partition seems to be OK

  Verify and repair volume 'Time Machine' Repair file system. File system check exit code is updated 8. support partition for the volume as requires it. Error: disk utility can't repair the disk. Back to the top as many files as possible, reformat the drive and restore your backed up files.

  
  

  I could really use some help as to how I should proceed.  Any advice?
  

  I think you need to clear this backup disk, and while you are this and do a full backup (which takes all afternoon to all night) you will be working without a net. If you do in idle time, and after checking your boot disk, the risk of catastrophic failure while the backup is low. Start now and in the future, you will have a backup.

  If you have a different backup disk, add it and Time Machine will create a new independent backup on it, and then Time Machine alternate disks automatically.

• Time capsule starts only after the last update

  My Time Capsule (A1409, 2 TB) is do not restart after having applied the most recent update. Has worked for years in my small locker in the basement connected to my local network. Fan seems to be working (vibrations of feeling) which connection to the power source, but the LED shows NO color. HW-Reset either doesn't help not. Probably from power supply? As the machine is not under warranty, what are my options (all) to retrieve the data on it?

  Other options apart from opening and get the HD out and connect it to a USB box to retrieve the data?

  What is the best way to transfer the existing backups to a new capsule so that (ideally) my 4 existing Mac can pickup their backup where they went before?

  Thanks for any input / advice / tips.

  Bonus question: any practice of best approaches on the Capsule of backup for the future (for example via a connected USB drive)?

  I intend to buy a new (although my NAS (QNAP) would support Time Machine backups, I don't plan to use it, not even for a double-backup-strategy).

  Probably from power supply?

  Vibration isn't the hard drive running... the fan... feeding is very well... the jury has no... was triggered by the update of the firmware, it would have happened soon anyway.

  What are my options (all) to retrieve the data on it?

  You MUST open the TC... There is no way to access the data except in order to open it... However, you can repair the TC using this method.

  s/Apple-time-capsule-repair/GEN4-a1409-issues https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

  It sounds gross... but has a long history in the world of Apple as a faulty weld is not a new problem.

  What is the best way to transfer the existing backups to a new capsule so that (ideally) my 4 existing Mac can pickup their backup where they went before?

  We recommend that you do NOT. It is often not successful and it is better to keep an archive on a USB drive for a few months and once you have a decent amount of history to put the USB back to other uses.

  You can copy the sparsebundle to each computer... Apple has a set of instructions--small as usual.

  Backups transfer TM...

  Doco Apple. http://support.Apple.com/kb/ht5097

  Pondini doco http://pondini.org/TM/18.html

  Any practice of best approaches on the Capsule of backup for the future (for example via a connected USB drive)?

  A TC has only a function of archive built in. Whenever you press on archive it backs up the entire TC on USB... not possible for incremental backup.

  You can work around this by using Carbon Copy Cloner... which can save almost anything to almost anywhere... However, it is extremely slow more wireless when the backup drive is plugged into the USB TC rather than on the computer... To copy all packages to TC on computer... computer to TC... TC on the USB drive.

  On ethernet, it is full duplex and should work ok... but it is always faster to plug the drive into the Mac and so you travel go simple package.

  I intend to buy a new (although my NAS (QNAP) would support Time Machine backups, I don't plan to use it, not even for a double-backup-strategy).

  I would certainly use the QNAP but with Carbon Copy Cloner rather than Time Machine. It is much more reliable and flexible... Although it lacks the possibility of several version of TM.

  A dual strategy of backup using TM and CCC is well worth... make clones bootable from all your computers on USB auto powered 2.5 "drives suitable size for each computer.

• Time Capsule A1355 no light, no sound? worked this morning now after connecting it, first go-ahead for colid quickly followed by the longest fixed Orange, which turns off and then nothing? He's dead now?

  Time Capsule A1355 no light, no sound? worked this morning now after connecting it, first green light solid, quickly followed by amber is more solid, which turns off and then nothing? I'm not in the airport or if directly connected to the Macbook air utility. It is running the latest firmware, updated 7 days ago and everything was fine until now. Tried both a soft and a hard reset factory but still nothing, but the same brief glow only after restarting each time before going dark again? Any ideas if it can be fixed or if it's as I read elsewhere dead now?

  Thank you

  Any ideas if it can be fixed or if it's as I read elsewhere dead now?

  He died... the fact that the main witness turns off is unusual in this model.

  It is common to the next... A1409 (gen4)

  What happens in the Gen3 is normally a few deaths on the Board... or a bunch of capacitors is low...

  See s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

  If yours is a very fine introduces Gen3 just before Gen 4, it is possible that the same fix on the Gen 4 could work.

  s/Apple-time-capsule-repair/GEN4-a1409-issues https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

  I found early Gen4 may fail as Gen3 but must admit that I am yet to see the Gen3 with welding problems.

  I doubt repair is worth it. The Gen3 is now about 6 years... give or take... This is way beyond the standard lifetime of a TC.

  If you want to play, I'm happy to help you... but I would not spend money on it.

• Where can I repair my Satellite M305-S4848

  Hello

  I live in Turkey and I need to fix my computer.
  Where can I teach my warranty time and repair of offices in Turkey.

  When I entered my serial number and part, I saw Product Registration part. What is it?

  Thanks for helping me.
  .

  Hello

  If I understand correctly, you want to know where is the service center in Turkey. It's Istanbul, Burhaniye Mah. NESET Bey Sok 7. Product registration is to register your laptop, as I know, to extend the warranty for 1 more year.

  Bilgisayarin iyi olsun. Iyi günler. (I speak a little Turkish)

• My 'light' stays off even if it is properly connected. Finished my time machine?

  My 'light' stays off even if it is properly connected. How can I solve this problem?

  Unfortunately, Apple does not provide repairs or even for the time Capsule repair parts.  If the Capsule is still under warranty, Apple will replace the device for you. Or, if you have AppleCare implemented one of your Mac and the Capsule is less than 3 years, Apple will also replace the device for you.

  There are 5 different versions of the time Capsule, so if your device is not covered by warranty or the AppleCare, whether or not repairs might be possible will depend on what model you have and how old the device that can be.

  You have the "tower" version of time Capsule-shaped, or the old version 'flat' or 'square '?

  If you have the old version of flat, square, look on the bottom of the unit for the model number. It starts with an "A" followed four digits.

• Time Machine is unable to finish his first full backup

  I am running OS X Lion 10.7.5 on my Mac Mini in 2011.  I recently had Melrose Mac increase its 16 MB RAM and HD sound internal to a 2 TB drive and they have cloned my original data and restored on the new drive.

  Then, I partitioned the drive and installed El Capitan, Yosemite, and Snow Leopard on each of these partitions.  Who are all the Mac OS X extended (journaled).  Each partition correctly starts and runs.

  Then, I took my LaCie 2 Bay drive, with 1 t readers in each Bay, wiped and set up as 'Fast' while it will be seen as a 2 t drive and chose this drive for Time Machine in Leo.  This disc is also Mac OS X extended (journaled).

  About halfway through the first backup (350 GB), I get the following message from Time Machine; now it happens more quickly:

  

  And here it is recreated Time Machine in system preferences:

  

  [click on image to enlarge]

  I followed the instructions several times using repair in the disk on the primary drive of LaCie and its partitin utility, but it does not report errors.  Then the first Time Machine backup will fail again about half way through.

  I've been reviewing Pondini suggestions, but they do not cover this specific message and they do not seem to find the problem.

  Any thoughts?

  Moderators, please move this to the subheading appropriate; as Mac OS X Lion/Time Machine and remove this message.  Thank you.

• Where is repair permissions to 10.11.3?

  Running a MBP 15 inch early 2011 with OSX 10.11.3. Where oh where is repair disk permissions? Running the utility of front disc I clone my hard drive, I've always had a lot of permissions that have been screwed up and it took some time to repair. I got used. Now, disk utility only takes a few minutes (if there are only) to seek repairs. It does in the background, or what I need to do something else? Thank you

  JAW

  There are more in El - Cap. It is no longer necessary.

• My laptop marked as being repaired, but two days later it has not yet delivered

  I sent to my y500 relief last Friday. He arrived in the filing center following Tuesday (June 10) and according to the filing status page has been repaired the same day and are shipped shortly.

  It's been 2 days and I had no updates on this subject being shipped and filing status page has not updated either.

  It usually takes a long time to repair to get them shipped when they are made in repair?

  Also I've never had a text message notification saying it has been repaired. I had a when they received my laptop, but not one for when they have completed to repair. He said online that is it repaired but never got a notification sent to my phone that would happen to me.

  

  Got another update again.

  They said that even once it was repaired as they must have found a problem when checking the quality of repairs from the first time.

  This has been resolved.

• My system hangs during startup "for the first time" after running the system recovery.

  HP G62 - 227 CL

  Win 7 (64 bit)

  No error message, in itself; just a screen frozen on reboot.

  Months, my computer has suddenly started glitching on me.  I stopped and tried a reboot.  The system froze on start with flying colors.  System recovery tried several times but must have made a mistake because he wouldn't.  Resolved to buy a new hard drive and reinstall from the recovery disks.  Delayed unnecessarily until today, months later.

  Before you buy a new hard drive, has decided to relaunch the system recovery.  It worked!  I tried the option that has deleted everything and restored to the software and factory settings.  Everything seemed to work like a charm: hard drive reformatted, reinstalled software, the system prompted me to reboot.  Yes, I did.  Windows started to boot, "Preparting your computer for first use of Setup" appears... and freezes.  For hours.  Hard drive led is off.

  BTW, made sure the button Wi - Fi was on what I read on the problems of recovery if it was turned off when the program is run.

  Restarted.  Press F11.  A ran maintenance and checked the hard disk for errors.  There are errors.  Unfortunately, the default setting of CHKDSK does not repair them.   A opted for a command line.  RAND CHKDSK again with option '/ f/r' seen in other posts.  Here I am too ignorant to get the program to run properly, I guess.  I ran CHKDSK on the two player X and C.  No error found... sort of.  I know they exist because the system will not start.  (Yes, I tried again.)  Return to the command prompt, I tried to run CHKDSK on the drive C again.  This time I got a message that I must first dismount (remove?) the reader.  As I don't know what that means, I opted for the 'no' and have decided to post this help message.

  So.  Suggestions on what do I do then?  More specifically: How do CHKDSK to fix the errors it found?  I think the message was: "errors in $130 of the sector...". "It shows this message two times at the end of 62%.  Freezes for a long time.  Gets will still only slow down to a crawl again around 70%, but no longer.  Then returns to the start of system recovery screen.

  System recovery ran again for the pleasure.  Again, seemed to work like a charm.  Unfortunately, the laptop again sits frozen at "Preparing... for first use" screen again.  It heats more turns.  The audible fan works now plans higher... If none of this helps.  I am stopping and waiting for your advice.

  Thank you!

  Zac:

  My apologies for the delay to return to you.  Believe you that computer gremlins have not hit my very stable desktop which has been fine for years with sudden instability driver?  McAfee thanks for this most recent update!

  In any case, after several diagnoses and find the hard drive has failed in each of them, I decided to install a new copy of Windows 7 as a test while I wait for my upcoming recovery disks in the mail.  I did it by removing all partitions on the drive and do a fresh install.  Here again, everything seemed to go well until that (apparently) a certain area of the drive was used to save/installation of the files.  Even after CHKDSK runs several times (each time he repaired several defective sectors but stalled after only 10% of the disk) the system will become unstable - the last number being a blank screen after logging on to Windows.  So, all in all, epic fail on the side of the hard drive.  The new drive is installed and waiting for my recovery disks.

  Thanks for all your suggestions.  They have been a great help with information, but not with the results because of the training.

  M