Timer switch

Similar Questions

• Software to switch between open windows on a necessary timer

  I need a software to switch between several windows open on a timer.  It will be used for a monitoring station in a manufacture of fixtures to leave the hands free, surveillance of several sets of information that are in different windows.  Anyone know where I can get such software or how even pick him up?  I search the web using 'scroll open windows' 'as alt + tab' 'timer switching window focus.

  Any help would be appreciated.

  Brian

  Hello

  Please use your favorite search engine to look for such software.

  THIRD WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Business Structure - timer / controlled waveform

  Hello world

  I am building a waveform of controlled time/switch. I have three different parts of waveform to 8192 samples each. I have a case of Structure inside the While loop.

  Structure of the case must have the following properties:

  -1st line (from above) on the output until what you press Start. This is the first part of waveform (normal state of the signal) so I can write these data several times.

  -When you press Start, the current examples are written after that write data of 2nd line exactly once (it's a transitional part of waveform)

  -end of the transient wave, write the fixed part of the signal (3rd line)

  - and finally, return to the 1st line of entry.

  Switch box must be done after prior data wrote because I need to synchronize the start of a signal which ends on the other.

  Any help would be greatly appreciated.

  Thomas,

  I did something like this before.  I've handled by putting the waveforme write and play in a loop (with a case defining structure that array to write to the data acquisition card).  In this way, if there is no action from the user, a default waveform is always written on the card and played.  When the user presses a button, a Boolean value has triggered another round of case (you will use the Boolean value to trigger a simple state machine that determines what table to write).  The final value of the state machine to go back to your original state.

  Example:

  State 00: Normal default waveform running

  State 01: User Action to start-> tracks 'line 2'-> change boolean to go to State 10

  State 10: series 'line 3'-> change to 00 status boolean

  State 11: {unused condition}

  The only part that this should affect is the writing of the real array to the data acquisition card (i.e. keep the rest of the code out of the apparatus of State, but within the main loop)

  I hope this helps,

  Sean

• Avoid Teststand popup on DST switch

  Hello dear Teststanders :-),

  whenever the time switch to daylight savings, our testers running for a long time complain that the sequence has been changed and it cannot be recharged because running is running. It's pretty boring. Although the tests are continuing in the background, I'm not sure that this does not affect the test. Also in the reports there is a time of 1 hour.

  Is there a way to avoid this, i.e. to use UTC? Perhaps as a parameter to Windows?

  We use Teststand 3.5. Were there changes in later versions in this regard?

  Best regards

  Thomas

  Hi Thomas,

  I looked into this further and concluded that this problem has been corrected in TestStand 4.0 and higher, so the next time that you upgrade you should not have to worry about this problem more.

  -Doug

• First Pro crashes when switching between applications

  Hi all

  I edit with Premiere Pro on a Mac Pro running OS X 10.10.2 cylinder (3.5 GHz 6 - Core Intel Xeon E5, 16 GB 1866 MHz DDR3 ECC, over-pants D500 3072 MB), when I connect the images with Excel, I noticed after some time switching between Excel and Premiere Pro or all the other apps, first Pro STILL crashes with the error serious.

  
  

  Project is very disappointing and frustrating that you need to open the recovery file, creating another file and have to get timecode all over again, lost a lot of time to. Expect First pro to work smoothly on a Mac Pro.

  Anyone have a similar experience or know a solution?

  Thank you

  L

  29/03/2015 07:19:23.457 com.apple.xpc.launchd [1]: (com.adobe.AdobePremierePro.66488 [4527]) Service was released due to the signal: Segfault: 11

  Here is my complete crash report:

  https://www.dropbox.com/s/08igd5s3s6evquv/Adobe%20Premiere%20PRO%20CC.txt?DL=0

  Process: Adobe Premiere Pro CC 2014 [4527]

  Path: / Applications/Adobe Premiere Pro 2014/Adobe Premiere Pro 2014.app/Contents/MacOS/Adobe first Pro 2014 CC CC CC

  ID: com.adobe.AdobePremierePro

  Version: 8.2.0 (8.2.0)

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Responsible for: Adobe Premiere Pro CC 2014 [4527]

  User ID: 501

  Date/time: 07:19:22.403 2015-03-29 + 0100

  OS version: Mac OS X 10.10.2 (14-1514)

  Report Version: 11

  Anonymous UUID: D42F2CB9-98B4-C04E-E594-A17C39AC5324

  Sleep/wake UUID: B58E8A4B-751B-4568-925F-D3E9E1130B43

  Time since started awake: 13000 seconds

  Wake time: 4000 seconds

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0 x 0000000000000000

  Hello world

  I dug deeper reading crash log, and discovered that the reason of my crash is primarily due to the confusion of audio output my mac has as he move from an internal speaker and speaker output and causes the crash. Since I had bought a DAC (digital-to-analog converter) and set the audio output of the DAC first and have no accidents since then. It will be useful.

  L

  ---

  Thread 0 crashed: Dispatch queue: com.apple.main - wire

  0 com.adobe.AudioSupport.framework 0x0000000103d7f8d0 ML::Device:GetNumberOfPhysicalChannels(unsigned_int,_bool) + 80

  1 com.adobe.AudioSupport.framework 0x0000000103d6adb8 ML::CoreAudioHost:PrivateInitDriver(std::basic_string____,_dvacore::utility::SmallBlockAllocator::STLAllocator_ _>_const&) + 712

  2 com.adobe.AudioSupport.framework 0x0000000103d6a18f ML::CoreAudioHost:LoadDriverPrivate(std::basic_string____,_dvacore::utility::SmallBlockAllocator::STLAllocator_ _>_const&,_bool,_bool) + 351

  3 com.adobe.AudioSupport.framework 0x0000000103d6dac1 ML::CoreAudioHost:LoadDriver(std::basic_string____,_dvacore::utility::SmallBlockAllocator::STLAllocator_ _>_const&) + 33

  4 com.adobe.AudioSupport.framework 0x0000000103d7b348 ML::CoreAudioHost::AddDependancy() + 56

• Using AS2 to get the time and change according to result

  I need to make any changes to a flash projector which was built recently that changes of what is played according to the time of day. It is used to announce the breakfast or lunch/dinner for a restaurant. Previously we had put in place so that the time change happened at 5 in the morning and 10 o'clock in the morning. The code is below. The restaurant wants to change the time switch to be now at the half. I know how to extract the hours and minutes to do.

  This is the code that I've been using

  var currentHours:Date = new Date();
  var currentMin:Date = new Date();
  
  
  timeInHours = currentHours.getHours ();
  timeInMin = currentMin.getMinutes ();
  
  
  var today: Date = new Date();
  shownow = now.setMilliseconds;
  
  
  
  
  If (timeInHours > 4 & & timeInHours < 11) {}
  breakfast_mc._visible = true;
  breakfast_mc.play ();
  dinner_mc._visible = false;
  dinner_mc.stop() ;
  / / trace (timeInHours);
  } else {}
  breakfast_mc._visible = false;
  breakfast_mc.stop ();
  dinner_mc._visible = true;
  dinner_mc.play() ;
  / / trace (timeInHours);
  }
  trace (timeInHours);
  trace (timeInMin);
  Stop();
  Clips of film of breakfast and dinner have this code in them, as well as at the end of each cycle, it checks the time and switches.
  I found this code on Flash Kit, and wanted to try to change it, my hope, was so that he could generate a delay of 24 hours 1604 or 1029 I could then do a comparison <>/ with, but this function adds the numbers then 16:15 = 31 and 12:19 = 31 also. Does anyone have any suggestions on how I can do this
  ? I need time to change at 05:00 and 10:30.  There is a possibility that they will want to extend out to include the day of the week as well. Now I just need the fractional hours for works well.
  function checkTime()

  {

  dat var = new Date() ;

  var h = dat.getHours (); / / 24-hour format is already...

  mn var = dat.getMinutes ();

  / turn to the last limit of 15 minutes /

  //mn = Math.floor (minutes/15) * 15;

  
  

  / / OPTIONAL - add zeros to the hour and minute

  if (hr < 10)

  hr = "0" + hr;

  if (mn < 10)

  mn = "0" + mn; / / remove these last 4 lines if the zeros not significant not due not
  
  
  retour hr + mn ;
  }
  
  
  usage example:
  time = checkTime();
  trace (time);
  Any suggestions are welcome. Thanks in advance!

  If you want to do something when the user time is between 05:00 and 10:30, use:

  var d: Date = new Date();

  If ((d.getHours () > = 5 & d.getHours ()))<10) ||(d.gethours()=""><>

  No matter what

  }

• Re: How would I do the successful Toshiba AC100

  Hi all

  I post my ideas for improvements here, maybe someone Toshiba reads this.
  The original blog post is here:
  http://soltesza.WordPress.com/2011/05/09/how-i-would-make-the-Toshiba-AC100-successful/

  Please feel free to contribute here or on the blog.

  -------------------------------------------------

  The AC100 is first Toshiba attempts to create an ARM-based netbook (a smartbook) chipset Nvidia Tegra2 successfully.
  Although the AC100 resembles an adequate hardware design, it became only
  success. Some of the reasons may have to do with the primary
  operating system, Android ([see my previous article on this subject | http://soltesza.wordpress.com/2010/06/27/toshiba-a100-smartbook-with-android-but-why/]), but more can be attributed to the fact Toshiba design decisions.

  Since these machines are now available in my country of origin (Hungary)
  at very attractive prices (~ US $250, some people seem to be)
  trying to get rid of him, shortly after the purchase) I can't bump into
  That's all the time. Sinc [view post | http://soltesza.wordpress.com/2011/05/09/2011/05/09/how-i-would-make-the-toshiba-ac100-successful/] e
  I'm a fan of gadget, I always have my trembling hand see these prices
  and I need to cool down before proceeding to an impulse purchase - I'm sorry
  thereafter.

  What I could click on the button "buy"?

  * Memory more *.

  First of all, 1-2 GB of RAM instead of the meager 512 MB the AC100
  hosts. Why the hell I tried Toshiba sell a netbook with 512 MB of RAM when
  ALL Atom N450 netbooks seemed to come with 2 GB at this time here?
  This amount of RAM would slap Ubuntu on the machine and not
  worry about running out of memory when loading of OpenOffice. Ubuntu has
  been demonstrated on the AC100 and looks like even catchy. (see this [site dedicated to Ubuntu on the AC100 | http://tosh-ac100.wetpaint.com/]). Toshiba could easily put 2 GB of RAM in the machine without significant cost increase.

  * OS or Android Office *.

  Put 1 to 2 GB of RAM in the AC100 would open the door to use a
  appropriate, based on the netbook desktop OS that can take advantage of the
  form factor. They should use Ubuntu, because that could be fixed up
  This material at any time (especially if they're buying tips
  from Canonical).

  I don't think Android needs to stay on the machine but if
  Toshiba still think it is a good idea for any group of users, what they
  could do the AC100 dual-booting, or better yet, to run two operating systems
  parallel (2 GB of RAM would do that quite possible). Android would be
  be the light and easy operating system on the device, but the user could at any time
  switch to a full Ubuntu desktop with an icon of the Android launcher and start
  using OpenOffice or another decent desktop software. The
  paravirtualization developed by B-labs would be a [instant solution | http://armdevices.net/2011/04/04/android-virtualization-on-ti-omap4-processors-dual-core-cortex-a9/] for this problem and would be future proof machine for a possible Windows8 scenario later.

  * Battery more *.

  The 8 hour duration of the AC100 is pretty decent, but more
  battery time is always welcome. The speaker has a LOT of free/empty
  the space under the keyboard because of the ultra compact nature of Tegra2 and
  its support circuits. Toshiba should again take advantage of the
  form factor and add one or more additional battery bays home under the
  a keyboard that could extend the duration of 16 to 24 hours. (Of course,
  they would make the unit but much more weight since these batteries
  would be optional, this decision is up to the user. A 24 hours
  running with a 3-battery arrangement would make the AC100 extremely
  seeking a large set of users. It is acceptable that the
  batteries are charged in the series (so the charging process is longer)
  While Toshiba doesn't have to switch to a more expensive diet.
  (Although the power issue is probably not a serious cost
  Factor).

  * What else *.

  Of course, there are many things to be improved (more USB
  ports, high-resolution screen... etc) but I have tried to make things
  that require a smaller redesign so that could be an improved version
  faster implementation.

  According to me, the AC100 line could be really successful and Toshiba to take the necessary steps to get there.

  Thanks for your interesting ad. :)

• Connection (enable WebService) error - CM1415fnw (latest firmware)

  Hello

  I bought amazing HP LaserJet Pro CM1415fnw color multifunction, yesterday. So my quest began:

  (1) installed the latest drivers on Mac OS X 10.6

  (2) connect the printer to the desktop external network WiFi (AirPort Express with DHCP and static IP to the internet)

  (3) tried printing via AirPrint, printer is not found, then download the latest firmware and upgrade of printer.

  (4) AirPrint works very well and I tried to enable Web services for the first time

  (5) connecting... Connection... Connection:

  Connection error

  The printer is unable to connect to the services. Check the Internet connection. Press [Retry] to try again or [OK] to exit.

  I tried a few times, switch power and WiFi connection. Tried to do it via the web interface and get error "connection error. Check Internet connection. ».

  Any ideas?

  Check your network settings. In particular, check that the gateway ip router is correct. The HP software can set the wrong ip there.

• PAVILJON ZA 15 Sleekbook 15b 15: error

  Touch screen works but the keyboard does not work. After ignition, it freezes, and it is not possible to use the keyboard and scroll. I can't use the mouse too. There is no cursor on the screen. So if I use touch screen it is possible to enter the password and use the laptop, but keyboard is still not working. If I have a several time switch manually, he asks is there any problem, and then leave that gives me the opportunity to recover the system and a few other options (several options) and right on this phase, it is possible to scroll (using the mouse) to choose the options. I tried a few options, but it did not work. On this stage, it is not possible to write anything, so I don't know if all of the keyboard work on this phase. After I failed to solve the problem, I'm going home by using the touch screen, but keyboard does not work. I'm not sure it's a problem with the system or equipment. Thanks for the help in advance and sorry for my bad English

  Hello @lazicveljko,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post on the issue of the keyboard/TouchPad and wanted to help you!

  For starters, can you provide me with the product number of the laptop?  Here is a link, you can use that will help you find your model and product number: How can I find my model number or product number?

  If the keyboard and TouchPad are able to work in other contexts of system, it may be a problem with the drivers.  Please see the following documents and let me know how it goes:

  HP - computer keyboard laptops laptop troubleshooting (Windows, 10, 8)

  HP laptops - use and troubleshooting of the TouchPad and ClickPad (Windows 8)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Finalis M40X-189 turns off randomly and won't restart easily

  A few days ago my Equim M40X close without surveillance (from the outlet with the battery in place). Everything that was on a witnessed the Green AC power. By pressing the button start has no effect. I removed the battery and replaced it - still no joy. Took it to my local computer repair shop - they argued at all first, there was nothing wrong, but when I arrived to collect it wouldn't start. They "reinstall the connector on the Board power and touch pad connector and tested 15 times - switches and turn off properly" £25 more I took it home. Next day-same problem. Finally managed to do start, but it stops after 1 minute. Rebooted again and ran OK several hours. Today, would not start. Went out the battered completely - started OK, but stops after 2 hours or more. I can usually get it goes by uplugging, sector or battery, but have no idea how much time he will go before stopping.

  Help, please!

  Hello

  Unfortunately, I think that nobody can really help you in this forum. If even in the computer repair shop they fixed well. I advise you to contact the TASP (Toshiba authorized service center), technicians can help you, because they familiar with Toshiba laptops and may order the damaged part if necessary.

• OfficeJet 6600. Works as a printer, but not able to start the scanner.

  OfficeJet 6600. Works as a printer, but not able to start the scanner.

  I am facing a strange behaviour of my camera. I tried to find similar problems on the forum, but did not succeed.

  I started it 2 days (near my 5610 old which seems to have problems of aging). I use a Sony VAIO PC, OS Win7-Pro, updated.

  Running the appliance following the instructions of the poster. Presents the installation CD. Wireless net was successful and the screen of the device is to give the corresponding IP address.

  But this IP has realized the configuration SW is not recognized. I tried thousands of times, switching and on different devices (router, printer and pc) in the order required, uninstall and reinstall the device.

  However, despite the property intellectual not recognized the device functioning as a "printer".

  But I need to use it as a scanner.

  Procedure by selecting the "scan to PC" screen of the device (only available as an option) I get the message "to ensure that the feature is turned on" and I am prompted to 'open the printer HP SW,... '. ».

  Go to Windows and by clicking on "HP SCAN" in the HP/HP Officejet 6600 directory I get the a warning window stating "HP Officejet unidentified 6600.

  Can someone, please?

  Thank you in advance.

  Hey,.

  Try this document! A "no computer has detected" or "Connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711)

  Have a great day!

• Xoom browser does support multitasking tab?

  I tried to listen to Internet radio in a tab, and reading the newspapers in another tab without result. This in the Chrome browser as well as in the Dolphin HD (latest version). A single tab is turned on and the other goes out in the background. Desktop computers have no problem with this kind of multitasking. Is there a way to make the Xoom supports multitasking tab? I would appreciate your help on this issue.

  Welcome louis25,

  The Xoom itself supports multitasking natively, but the app must also support multitasking or even multi-threading. For example, I often start a new installation of app and then switch on the browser for surfing the Internet. When the download and installation is complete, the Xoom warns me in the lower right corner of the screen (it's multitasking). Similarly, I typed a URL in a browser (using Chrome, Dolphin HD or Firefox 4) tab and then immediately passed to another tab and load a different URL at the same time, switch back to the first tab shows that it finished loading in the background. I think the problem you are experiencing may be limited to streaming audio or Flash in the browser, maybe it's not multi-tasking capable. I do not stream Internet radio via the web, but use the Android app instead (it's FREE through Amazon today only). If you use the app, you can carry out several tasks and it requires fewer resources to work (and your free browser for the other surf leash).

  The other thing to consider is that Chrome (and possibly honeycomb) are suspected of leaking memory when you use the browser (where the reason why we recommend restart from time to time). This can also impact your use of the browser for audio streams.

  -Doc

• WiFi and bluetooth turn off all

  Hello!

  You have the problem as topic. Thing is annoying because I use the bluetooth mouse.

  When I'm not in wifi range and must use ethernet I turn off wifi in key.

  Unfortunately, this also turns off bluetooth and my mouse no longer works.

  How can I solve this problem?

  Somehow configure this touch button?

  BTW I uninstalled HP Wireless Assistant.

  Thank you!

  HP Pavilion dv3-2050ew
  Windows Vista HP SP2

  Hello

  Install new HP wireless Assistant here and next time switch to wifi with this program.

• reboot updates require 3 restarts hard

  Whenever I have re-starting or stopping to perform an update, the computer does not restart automatically. He will start the boot for 2 seconds and stop. No display on the screen or the keyboard not only report the power running fan.  I have to hard re-boot of the computer and on the third time switch, the computer starts and works normally without error codes displayed. Been doing this for a year. Windows Vista Home Premium and HP 9650.

  Hello

  I suggest go to installed updates and check if the updates are installed correctly:

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  If updates are not installed successfully, then try to remove the updates and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  Also, try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• T410s - Ultrabay Battery and locking issues

  OK just - my new newegg.com ultrabay battery:

  http://www.Newegg.com/product/product.aspx?item=N82E16834994268

  is having intermittent problems. I will list out them:

  • Connect the questions of recognition.
  • Wake up sleep (as HERE)
  • Charge of issues - it is stuck at 18% now and does not load!

  To explain more. When I got the battery that I plugged it in and the system immediately recognized and began to charge. I have let it charge all the way up. I used it for say 30 minutes on battery which worked as expected. The battery of the UB exhausted up to 70% or something and put it to sleep. When I woke up the machine (the cover) the battery ejected, and whenever I have it plug back, said he is ready to be removed. To resolve this problem, I have to restart or sleep again then he semi works.

  Now it to something else - it shows as connected but still drains the MAIN battery and not the UB even if she is charged. When I remove the main battery and boot the system with just the ultrabay battery starts to beep at me (like beep beep beep beep as no stop). It is always powered of course and shows always have a battery.

  Now even when I plug (adapter 65W and 90W sector) it shows "Connected at no charge" and it's there. Power Manager indicates that the battery is in good conditon, always 0 cycles. First used 7-11 - Manufacturered 12/10.

  Last issue being the lock, I guess do it several times now, it's super hard to remove the battery, it seems as if I'm doing it wrong, but the first time when I arrived to the farm, I did to remove the DVDRW in it easily, there even 1 fingers. Now, it's like I'm breaking my fingers to get it open. The first switch, is more difficult to move too so the time switch is crazy hard to slide!

  So, anyone got any ideas? I have 3 years warranty so I can send it, but it is my only system so I'm going to be naked for awhile until she coming back to me (no guarantee on the spot on this system, I "improved" to a T410 which was spot on.).

  Thank you

  PS - Sorry for the long post, I just wanted to give some details

  FYI - apparently it was all the way down to the motherboard that needs to be replaced. Had to send in twice but the 2nd time that the Board of Directors has been replaced and now fresh stuff as it should. It also allows the hot plug and the switch is also easily removable.

  Didn't want to be one of 'those' posts where the questions are asked but no solution posted later or "NVM - it is fixed.