Toshiba STOR. E CANVIO 2.5 "2 TB to save energy?

Similar Questions

• Toshiba Stor.e Canvio on MacBook Pro

  Hello

  I bought a Toshiba Stor.e Canvio 1 TB external hard drive and I have problems when I connect it on MacBook Pro.
  I formatted for Mac OS (with the registry) and works well with the iMac and Mac Pro, but nothing to do on Macbooks...
  Searching the Internet I found that this problem is impossible due to a hardware problem which can be solved using a USB hub and I tried but does not work...

  I don't know what else I can do if you know something about this problem, I will be appreciated...

  Thanks in advance.

  Hello

  I assume you mean on this external HARD drive
  http://www.Toshiba-multimedia.com/EU/store-external-hard-drives/Canvio/

  This HARD drive needs 900mA current and this means that you can use a USB 3.0 port or 2 USB 2.0 ports.
  The point is that a USB 3.0 port provide 900mA and USB 2.0 port provides 500mA
  So if you Mac provides only the 500mA to each USB slot, then you connect the 2 ports USB 2.0 HARD drive, in this case, you can use a usb cable to Y.

• Toshiba Store.e Canvio 1 TB appearing is not on Macbook

  Hello

  I have a problem with my external hard shore, it is a Toshiba Store.e Canvio 1 TB, HDTC610EW3B1.
  It works fine on my old Macbook running the Mavericks but now on my new Macbook Pro retina running on Yosemite, it will not appear anywhere.
  I checked with disk utility, and it does not, also not appearing is not on the USB in system preferences.

  Any ideas on what is happening here, please?

  Thanks in advance for your help.

  You can test it with the Windows machine? There is everything OK?

• Toshiba Stor.E Canvio HARD drive does not appear

  Hello

  I got a Toshiba Stor.E Canvio for about 2 years without problems

  By using the external drive recently and the USB cable is removed accidentally. After attempting to connect the USB on my Mac again once the external HARD drive does not appear in the Finder.

  Passing through the disk utility, the hard drive is visible, but I am unable to check or repair the disk.

  The message I get is

  "Peut-t disk utility repair this disk. "Save as many files as possible, reformat the drive and restore your backed up files.

  The HARD drive itself is turned on, the light is on... but I'm stuck now

  Any help would be appreciated

  Gary

  I m not iOS expert and, therefore, I cannot recommend to any advanced troubleshooting but recommend you check out this thread:
  http://Apple.StackExchange.com/questions/130304

• Unable to partition Toshiba Stor.E Canvio

  Hi all

  Just bought a Stor.e Canvio hardrive 3 TB desktop.

  I use a Mac app, have formatted for Mac OS extended (journaled). I want to put 4 partitions on the disk as its to use for the backup.

  However, when I try to partition through disk utility, it gives the following error

  Partition failed with the error:

  Invalid query.

  Ideas please

  Thanks for your comments!

• Toshiba STOR. E CANVIO external HARD disk - windows cannot find 'ToshibaPlaces '.

  Hello I have a problem with my new external hard drive Toshiba STOR. CANVIO E (3 terabytes).

  I double click on him and this message appears:

  Windows cannot find 'ToshibaPlaces '. Make sure you typed the name correctly and then try again. To search for a file, click on the search button, and then click search.

  The good news is that when I right click I can press 'Explorer' and it Explorer.

  Can you help me please?

  I have found this HARD drive on a Toshiba page and the page on record indicates that a Quick Start Guide has been preloaded.
  I guess I was placed on the Toshiba Places page.
  But Toshiba Places have been replaced by parts of Symbaloo and probably the link is not valid more

• How to move data from iMac to 3 TB Stor.E Canvio external HARD drive

  Hi guys,.

  First post, new to all this.

  I bought a Toshiba 3 to Stor.E Canvio external hard drive to get a load of movies and music out of my iMac.

  I plugged it in, the iMac seems to recognize, so I tried to drag and drop in the folder on the hard drive, but it leaves nothing.

  Can someone give me some advice on how to move things from my iMac to the new hard disk?

  Thank you very much, looking forward to hear from you.

  Hello

  As far as I know the HARD and the NTFS file format disc media.
  If you want to use it in Mac, you must re-formatted the system filesystem HFS + for Mac compatibility.

• Toshiba stor.e wireless adapter, WiFi password

  Hello, my problem is that I forget my wifi password
  Toshiba STOR. Connection of the E, solution no wireless card

  There is a small hole

  

  Use a paper clip or other object and that insert into the hole.
  Hold 5-10 sec and the settings must be reset again default

• Toshiba Store Tv 1.5 - subtitles

  Hello everyone.
  I m new in this forum that I recently had a Toshiba Store Tv 1.5.
  First excuse my ignorance as Im not very in all technologies of this and everything, and my query may seem silly...

  I wonder how can I put subtitles for movies Im store in the material.

  I Don t really know how to do and I like to watch movies in their original language. I would appreciate if you could please let me know how to do it.

  Thank you much in advance.

  Hello

  I think that's not possible.
  As far as I know the subtitles are part of the software.
  I didn t find all the new packages for it then in my opinion, he must stay with the subtitles available until the new packages would be released

  Welcome them

• Toshiba stor.e 1 TB HARD drive no longer works

  Hi all

  I have a new Toshiba stor.e 1 TB HARD drive and was transfer photos and music to it and all was fine, I ejected it but when I plugged it back I get the message:

  F: is not accessible
  Data error (cyclic recovery control)

  A quick search and it says that run cmd and chkdsk but that simply says:

  The type of the file system is RAW
  CHKDSK is not available for RAW drives

  Please can someone help?

  Thank you

  According to the article in the Microsoft Knowledge base, the data error (cyclic redundancy check) - indicates that the operating system has found a car with bad sectors or some other intermittent problem.

  In my opinion, you should go to disk management and check if the external HARD disk is listed:

  -> Panel-> administration-> computer management tools--> disk management

  If his list, you can change the file RAW to NTFS format
  Then you can perform a chkdsk command.

  But you lose the data, change the file format.

  As far as I know, using the command: + convert DriveLetter: /fs:ntfs + (drive letter + should be replaced with the drive letter of the USB HDD) should not lead to data loss

• Toshiba Stor.E D10 on Satellite A660 PSAW3E esata connection

  Hello!!!

  A few days ago, I bought a 1.5 to Toshiba Stor.E D10 eSATA HARD drive.
  I tried to connect it via the eSATA cable. At first I saw my D10 HDD 1.5 in Win explore (Win 7 Home Premium x 64) as drive E.
  When I tried to access the drive, I get a "device not ready" error I was expecting 5 minutes with HARD drive connected externally. I got the same error. When you look in the Device Manager in the records section I couldn't see it. All I see is the internal 640 GB HARD drive.
  When I connect it via the USB 2.0 connection, the drive is recognized and working properly. I could transfer data to this subject with 23MBps max on USB 2.0 speed is 60MBps (480 Mbps).
  As I work with huge video files (~ 10 GB per hour of video) I need an eSATA connection to expedite the transfer.

  Plese help me with this problem!

  BIOS for Toshiba StorE D10 1.5 TB HARD drive PA3827E external?
  Sorry, mate, but I think that you misunderstood the thread.
  There are no BIOS for an external HARD drive. BIOS are available for computers only.

• Can I use Toshiba Store E TV for backup?

  I would like to know if I can use 'Toshiba Store E TV' device to back up my files on the computer, such as the use of an external USB drive?

  Hello

  Of course, you can take the TV Store.E to back up the files. The HARD drive has a USB interface which means you can connect your laptop or a computer via a USB cable and save the files on it. :)

  If you have any other questions, please let us know!

• Toshiba Stor.e ALU 2 s 3.5 "does not work with my XBOX

  Hi all, first timer here

  Just got a Toshiba external hard drive as a gift. Wanted one for a while, mainly to use with my XBOX 360 to watch movies and listen to music on. However the xbox does not pick up the hardrive (connected via USB), but he'll be looking for my friends generic hardrives. Anyone has any idea why?

  It looks like a fairly recent model, here are the specs in the (very rare) manual that came with the hard drive:

  Toshiba stor.e 2 s 3.5 ALU "
  1 TB
  USB 3.0
  Backward compatible with USB 2.0 (I don't know what that means "backward" here)

  I'm not a computer person. I use the laptop to surf the web, media, applications etc, basic College work. Few of my friends have external hard drives, mainly cheap generic brands of the average and all work fine on my XBOX, just plug-and-play.

  If anyone has any advice on how to do it, or even where to go woth my question I would really appreciate it.

  TIA
  Creamy

  Hello

  In my view Backward compatible means that you can use this HARD drive with USB 2.0 ports. But the fact is that USB 3.0 port provide 900mA and USB 2.0 only 500mA.
  I guess that's your HARD drive
  http://www.Toshiba-multimedia.com/en/store-externe-Festplatten/ALU2-s-35/
  According to specifications, you can find info that this HARD drive should 900mA

  Therefore connect the HARD drive to two USB 2.0 ports using a USB Y cable.
  I think this will help you.

• Toshiba Store TV + lost demo

  Hello

  I have a big prob with Toshiba Store TV + lost settings video grrrrr
  I put this on 720 p
  When I turn off / on the store tv's then this option in case of default (standard)
  Why this save my setings?

  Sorry this suxx a litle

  Hello

  I was a little confused m
  If this (720 p) is set as a default value, then that should be attributed to your settings automatically
  Am I wrong?
  So why try to change it again?

• TV Toshiba Stor.E 1 TB PA4209E-1HJ0 SYSTEM FIRMWARE UPGRADE?

  Hey

  I just bought a toshiba stor. Media Player 1 TB E tv, but it does not support formats mkv video & others like rmvb
  Y at - it an update of the system firmware that I can Flash the BIOS?
  If Yes please give me the link to it?

  Note: I him have not found on the support page

  But I read that the Stor.E tv 2 TB support video file formats, that I'm looking.
  Would it not possible to use the same bios firmware on the 1 TB?

  Thank you & best regards

  > But I read that the Stor.E tv 2 TB support video file formats, that I'm looking.
  Yes, but you said that you found some info this firmware update would add some videos I format didn t find these info, so I guess it was just an idea and not true info