TouchSmart 300-1125 (Jesse APP78-CF) do not start BIOS

Similar Questions

• get an hp mce remote for touchsmart 300-1125

  I want to add a command remotely to my HP Touchsmart 300-1125 and think to order the remote control 5070-5600 HP (random link: http://cgi.ebay.com/HP-COMPAQ-5070-5600-Media-Center-Remote-Control-/330414657906#ht_805wt_911).

  I wonder two things:

  (1) the receiver IR * is * integrated, is not it? (Device Manager lists an functional eHome infrared device)

  If in doubt, where should I look for the sensor to the IR receiver on the case?

  (2) I think lists distance 5070-5600 as made to the old series IQ of Touchsmarts. He will work with the new 300 series?

  Thank you

  Mike

  I have now received the HP remote control (only part no 5070-2583) and were able to try with my TouchSmart PC. It does not, then, obviously, there is no sensor IR receives the signal, even if the infrared device eHome is listed in Device Manager.

  My guess is that the device is listed as the same motherboard is used on all models, and the remote control chip is present, even if not connected to a sensor IR diode.

  I ordered a HP's IR receiver to the external address (only part no 5070-2584) so hope to be operational soon anyway...

• Satellite P20 does not start - BIOS are not displayed

  I have a Satellite P20 and recently it does not start. When I press the power button that disk HARD will light up and it will check the cd-rom drive, but the screen is blank and will not display the bios screen. I can only turn it off by pressing the power button.

  Is it likely to be a hardware problem? I'll try to remove the RTC battery if possible to see if this resets the bios.

  Thank you

  Hello

  Maybe you have a problem with your battery from the Machine.
  Please make a new start without the battery.

  Go that wasn't you maybe has a possibility with a display of extern.

  I hope this is a help.

  By

• TouchSmart 300-1122: Mic Jack works do not (a little)

  Product #: BK338AA-ABA

  Okay, so the question here. I'll try to include some pictures too. So, on the left side of my computer, it has a headphone jack and microphone jack.

  

  Low headphone plug works perfectly. I plug my TRS 3.5 mm headphones and they work. Just to show you that they are infact headphone 3.5 mm TRS:

  

  I also have a microphone (which works on all other computers in the House), which is also a 3.5 mm TRS plug:

  

  But when I plug in my microphone on taking online, I get whether audio. Is not same airship. Here is an example, with the MIC is plugged in (before ask you, yes I know my integrated is the default device, I use this show even when breath super hard directly into the microphone, without the audio is saved):

  

  Now, before asking all these stuff, yes I did all the stuff of pilot. I have done this, done that, let windows install, downloaded the default value of HP.  If you have access to new drivers, shot my way, but of all my googiling, it seems that what I have is the best that there is (photo below).

  

  Then, why is my say title (a bit)? Well, you know how to the microphones and speakers, they are a similar technology just goes different directions? Well I plugged my headphones in there, and I blew air in as hard as I could, and it actually only picked up. Don't get me wrong, it was EXTREMELY feigned (as it should be, since these are headphones being forced to act as a microphone), but nevertheless, I was able to actually record the audio from those. So for me, it means that this microphone jack has some features, but for some reason, my microphone doesn't work simply.

  So my question to you, has taken all these information? Why my microphone is not working? Require a microphone powered? Require a jacks 3.5 mm JACK instead of the 3.5 mm standard? I can assure you the microphone works. I tried it on two other computers and got her nice and crispy. I tried to open my touchsmart, but all the wires seemed to be intact. In addition, given that the headphones were able to send some audio adds as further confirmation that the connections are secure.

  If you have a look, I'm all ears. I hope that I gave you a good amount of info to work with.

  OK, so update: I thought that one way or another, something must be damaged or something. The reason why I never noticed that this entire problem was earlier because I've always used him built in mic, but after continual complaints from slightly background hum and others (as is the case with built in microphones), I decided to buy a micro cheap for my computer. AFTE, in doing so, I then learned that the outlet is not functioning little matter what I do.

  Anyway, the solution I found was to buy this Sabrent USB external adapter stereo sounds. So pretty, it is a small USB key with a sound card in that you plug in and the computer recognizes it. It costs around $7-$14 (there are other alternatives if you don't want to buy the one I listed). Simple as pie. So I plugged it, with the microphone into the mic jack. I changed some settings, because when you plug everything in, he wants to replace both your microphone AND your audio output. Which is ok, you can plug your headphones or speakers, but I wanted my computer headset, jack/speakers to work instead. Just so go into the sound settings and restore the default value for your computer speakers. (photo below) While elsewhere, you can always connect your headset on your computer and get the audio, or just listen to out of the enclosure built into the touchsmart computer.

  

  Then in the mic tab, I have the USB set as my default microphone rather than integrated like you can see on the picture below.

  

  If the USB is responsible for all the purposes of mic. In case you're wondering what mic I use, this is the one: neewer mic

  It is very cheap (even in this pack 2 it's like $5, if that $5 shipping, then maybe pair it with something else). Or if you have your own base micro little has no need power to make it work, just plug in the USB and bam you're good to go. Not the most ideal, of course, you do want to be able to solve the problem at its source, but given the difficulty has been to buy a cheap USB plug no game sound card that I could get on sale for $6 with shipping included, I'm happy.

  I wanted just to update everyone to know that it was the best I could do. Thank you all.

• HP laptop 110-1125: new hard drive, do not start

  Bought a hard drive refurbished, equipped... now not going anywhere watch just info system assets/erase and report... can anyone help please?

  I'm not familiar with these error messages. Did you properly installed Windows on the drive?

• Satellite C855 - 21Q does not start - BIOS flash failed

  Hello.

  I'm french, sorry if my English is bad.

  I updated the Bios of a Toshiba C855 - 21Q. But during the flash, mobile restarts.

  Now, the computer will not boot (black screen + power on wifi led flashes).

  I'll try the recovery mode.

  I extracted the exe file. Rename the FD PLCSF8. EDM
  Copy to the root of the USB stick (256 MB FAT16).

  Can I plug it into the laptop with AC, HDD, unplug. Just the USB STICK.
  Plug the AC, hold + B key and start the computer.

  But nothing happens. The USB is not read (no Flash)...
  I also tried with the other key like Fn + F / Fn + B / Fn + Esc... still nothing.

  What are the keys to start the recovery.
  The process is correct?

  Thank you.

  Hello

  Unfortunately, you need special BIOS version to be able to Flash the BIOS to USB flash memory.

  The fact is that you could download only the version of the BIOS Win-based driver Toshiba UE page and requires this version of BIOS preinstalled system.

  In your case, it seems that something was wrong during the process of updating the BIOS and the EPROM module was not properly flashed. To resolve this problem, the EPROM module must be flashed once more use special disc of crisis of the BIOS.

  To my knowledge, this can be done by Toshiba approved maintainer.

  However, I have also read in this forum that only users managed reflash the BIOS with Bios Phoenix crisis recovery tool. Not very well where you can find these software but recommend to google.

• Error PXE 3000 N100, does not start BIOS

  Hello people,

  I recently picked up some laptop second hand and projects for free time and learn a little more. One of them is a Lenovo 3000 N100. I'm not sure of the exact model as the COA sticker is worn. The laptop came without RAM, a hard drive or battery! I am aware that this may be more effort than its worth, but wanted to give it a go...

  With RAM installed, shows the white startup Lenovo screen (sometimes quickly, sometimes takes forever) - if I press ESC, then the following information is displayed:

  Unknown project ID! BIOS version? 61ET32WW

  CPU = Intel (R) Celeron (R) M CPU 410 @ 1.46 GHz

  1023 M system RAM passed

  1024K Cache SRAM Passes

  System BIOS with a shadow

  Video BIOS with a shadow

  CD ROM...

  Initialized the mouse

  Pressing F1 or F12 does nothing.

  The following errors are then displayed, which Google I see is a common problem. However, I can't find a fix that applies to me.

  PXE - E61: Media test failure, check cable of

  PXE:MOF: get out the PXE ROM

  Operating system not found.

  From what I see online, the portable computer tries to boot from a network/LAN. I tried a XP boot CD with no joy.

  I can't access BIOS to change boot priority.

  The RAM seems to work judging by the messages above?

  I tried to put in a blank disk and remove it (tested with novatech adapter USB SATA, HDD seems to work well).

  Is my next option to reset the CMOS battery? I should add that on the first screen, I received at the start of error codes 0271 and 0251 regarding the date system and time and CMOS checksum bad, but after leaving the laptop plugged in all night, they make their appearance is no longer.

  No wonder that BIOS was confusing - it turns out that F1 and F12 are dead keys, and one of the Ctrl keys (I used an online keyboard controller to test). Access key for the BIOS and to the startup list both did not work. I managed to access BIOS by using a USB keyboard. I think I'll try reinstalling the keyboard first, if this does not work, have a go at a personal key, and if it works no - one second hand keyboard. BIOS is not the latest version, but I guess that there is not a huge need to update?

  XP is installed for now, because I don't have spare keys Windows 7. I have a few modules of 2 GB of RAM, so it will move to the 3 GB maximum. Then decide to keep or not! I have a Z60M I prefer, so that this one will probably get donated or sold. Just a shame the RAM is so limited on them.

• DVD ISO of Windows 7 does not start - BIOS set to DVD first

  I have 2 good DVD players that reads the dvd that has been verified on another computer. However, when I try to boot from the dvd, it passes right outside the entrance of the DVD and starts from the HD. I put the BIOS for all three races by DVD. What now?

  Saturday, November 28, 2015, 22:50:34 + 0000, MarkColetta wrote:

  I have 2 good DVD players that reads the dvd that has been verified on another computer.

  The two who read the DVD or both which start with him?

  Assuming the former, your problem is with the DVD.

  However, when I try to boot from the dvd, it passes right outside the entrance of the DVD and starts from the HD. I put the BIOS for all three races by DVD. What now?

  http://answers.Microsoft.com/message/6a84f325-192B-49e2-95be-6d28ef28ebd4

• External video TouchSmart 300-1007 Nvidia card

  ATI Radeon HD3200 integrated video card does not work. Is it possible to install a NVIDIA GeForce G210 , as if it would be a HP TouchSmart 300-1060 a or any other model TouchSmart using the motherboard APP78-CF (Jesse) ?

  Hello

  The card mother card indicates:

  Expansion slots

• HP TouchSmart 300-1120: the video card upgrade

  I came into possession of a HP Touchsmart 300-1120. I do not use not for the games just the navigation and use to watch movies when traveling through Plex home theater.

  I've updated the CPU to an Athlon X 4 605th & maxed out the RAM 8 GB. I noticed that I can upgrade the video card using the Mobile PCI Express Module slot.  Even though I know that the GPU Radeon HD 3200 onboard can handle HD videos, he hangs out considerably. even though I have the film on the hard drive.

  So the question is, where can find one of these cards. And is there a way to upgrade the PSU?

  Thank you

  Jim Hutto
  I do not work for HP.
  I am a computer technician and a passion for computing with more than 32 years of computer repair and networking experience

  Your PC AIO has a sleeve of MXM graphics.  The following video card will work. It was included in some models of PC.

  HP 594505-001 nVidia GeForce G210 512 MB MXM DDR3 video card

  http://PartSurfer.HP.com/ShowPhoto.aspx?PartNumber=594505-001

  You need to search online to find a seller or a person who has one for sale. I see them on eBay for @ $35-50, 00

  The upgrade of the PSU is not a viable option.

• TouchSmart 300: Windows 10 no sound

  Hello

  I have upgraded to windows 7 to 10 and have now no sound. I tried to update the audio driver which is updated but still no sound. ideas please

  Isca13

  Without your specific model number, I can't check for your PC, but I checked several Touchsmart 300 models and the problem is that your driver is NOT updated - and cannot be updated.  Why? Because HP does not provide the Win10 for the Touchsmart 300 pilots.

  If you follow the instructions in the thread and post your detailed model number, I can check for your model: find your model of HP product number. HP® customer support

  But fundamentally, the problem that you are facing is that Microsoft provides only pilots with the most basic features and what you really need for these features in laptops is the specialized drivers written for the specific material found in laptops - and unfortunately, there is no HP Win10 driver for your laptop.  HP only guarantees the compatibility of Win10 for machines manufactured after August 2013. HP is not no matter what timetable indicating when, or IF, they will produce drivers for older machines.

  Here are a few alternatives to pilot, you can continue...
  
  You can try to use Windows updates to find the drivers from Microsoft deposits for your device: http://support.hp.com/us-en/document/c03330139
  
  You can also try following the instructions in this thread: http://support.hp.com/us-en/document/c04763435/
  
  If Windows Update doesn't give new drivers, you can pursue alternative which are described in the linked Microsoft Windows Insider community thread: http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_devices/how-to-install-and-update-drivers-in-windows-10/a97bbbd1-9973-4d66-9a5b-291300006293
  
  If you then run into trouble, install the drivers through Windows Update, you can try to use of Microsoft Windows Update Troubleshooter: http://windows.microsoft.com/en-us/windows7/open-the-windows-update-troubleshooter
  
  Good luck
  
  ========================================================================
  If you feel that my suggestions helped you, please click on the Thumbs-Up symbol; If they helped to solve your problem, please click "accept as a Solution.
  
  I'm a volunteer and I do not work for, or represent, HP.

• HP TouchSmart 300 connection issues

  Hi, I have a HP TouchSmart 300 with Windows 7 Edition Home Premium that I bought in 2008. Yesterday morning it was working completely fine. The end of the night when I turned it on again, it took a while to start and join the log on screen. I was thinking just leave it off overnight and turn it on the next morning to see if that would help. I turned it on this morning and it took awhile to get to the log on screen, but he got there. Once I logged it took awhile to open a session and he stayed right on the Welcome screen indicating the loading circle. When he connected, the screen was black. Works and move the cursor, but everything else was black. I pressed Ctrl + Alt + Del and the usual options screen appeared. I clicked on log off. I then logged back in and it started to load for awhile then all returned to the login screen. I connected again and again the black screen with the cursor to work. So I pressed Ctrl + Alt + Del again and cliked start the Task Manager and it returned to the black screen. After 10 minutes to leave her like that the Task Manager appears but the rest of the screen is always black. I know 5 years will be a great run by a computer these days, but I just want to know if I could still save and continue to use it.
  
  Does anyone have an idea of what might happen and how I could solve this problem?
  This happened to someone else?

  Hello Mindy123:

  Welcome to HP forum. Sorry you hit hard by malware / virus. The reason I say this is because if Windows are not authentic. This is not the message, that you would see period that yours is false. The real message in a white box appears on a sreen desktop windows open up on the right. He'll tell you please provide Microsoft with contact phone number.

  There are three things you can do. 1 is try the safe mode method. Turn your computer off tension, then restart it tap f-8 keys use arrow keys select Safe mode with network. You can try to remove it by low loading verson of the trialhttp://www.malwarebytes.org/ malwarebytes scanner once he has finished and deleted everything. You can see if your computer starts normal now or if you like you can also try running a free virus scan check as well. http://housecall.trendmicro.com/  If no analysis removes the virus/malware. Your computer still is not booting properly then it in 2 safe mode this time you now open up HP Recovery Manager and perform a Microsoft System Restore. Go to all kind of research programs in the HP Recovery Manager open it select the Microsoft System Restore, click Next until you get to the dates that you select a date as far as you can. It can perform the recovery. Once, he completed see if your computer starts normal now. Sometimes this method whipes on the virus / malware. If this a not you don't have no choice but to do a restore factory, only cd discs.

  Pior that put your computer in safe mode and back up your personal data files once completed. Then precede to step 3.

  3. turn on your computer and press the f-12 Recovery Manager window will open. Select Restore Factory of cd. 1 insert recovery disc follow all orders for recovery. Your computer will be slow at first until it has updated itself witch will take about three days to update. Don't worry about the updates of the trees that fail to install by the end they finley will be installed.  If you have any problems, follow these steps let us know.

  If the three methods don't turn off your computer. Turn on your computer hold down Esc button for 5 seconds. Change the start of your computer in order to initialize disk CD/DVD Recovery disc 1 insert click on save and exit. Restart your computer that will automatically start to recovery. If Recovery Manager ask you how I would like to perform a recovery. Select Restore Factory disk CD and continue to follow the orders of recovery. frrw

• My UK Touchsmart 300 will work in the United States?

  I bought my Touchsmart 300 at the United Kingdom 2 years ago.  Now, I'm moving back to the United States and bring it with me.   I have an adapter for it and if so, what kind?

  Ed,

  Yes, I meant the laptop as power supply. However, since it has an internal power supply, please provide the full name of the HP model and/or the name of the product to the computer in question. I'm trying to determine if the power supply is auto-allant 100 to 240 volts as laptop power supplies are.

  Information of a product number: VG255AA / name of the model: HP TOUCHSMART 300-1025UK indicates that the internal power supply looks like;

  

  http://allpcpower.com/images/products/detail/517133001FULL.jpg

  

  http://allpcpower.com/images/products/detail/517133001DETAILLABEL.jpg

  This picture shows clearly... of 100-240 v, while the first image does not display a red switch. This should indicate that the power is automatic. Now, if your computer uses the same power supply... you can be good to go, just using a computer 110V US cable.

  Please send Bravo

• replacement for touchsmart 300 cd/dvd drive

  Anyone know where I can buy a replacementcd/dvd player for my hp touchsmart 300-1025. (Frys) Electronics retail stores were not of this type. Also tried hp parts store online but the model number of the drive (ts-t633l/hpah) or serial number (sn: q1256RKS818777) show no matches.

  below is my info product.

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&DLC=en&LC=en&product=4007378

  Thank you

  Hello:

  I posted the link to the list of HP parts Surfer for your model of PC.

  http://PartSurfer.HP.com/search.aspx?SearchText=NY537AA

  You can see the DVD player with the number of the part you need listed towards the bottom of the page under drives.

  Then I entered the part number in the store of parts of HP on the link below, and you can buy it online if you wish-$76,61

  http://h20141.www2.HP.com/hpparts/Search_Results.aspx?mscssid=ACC01C59B1974CE6B533C384C1DB7EDC&SearchIn=PartNumber&SearchPN=NC700-69001

  You can try the search by the part number on eBay and see if you can get a used, but tested and functional drive at the best prices.

• TouchSmart 300 Windows 7, re - install on hard drive replacement problem. Help!

  I have official restore for my Touchsmart 300 disks and try to get it back on a hard drive, which I took from another machine. Drive hard said have left include Win 7 and Win XP. When I try to boot from the recovery CD, I am taken to the old hard drive Artemision boot menu, not the installation of the recovery disc. If I continue on this path there, I get an error message and a suggestion from my hard drive is damaged. Repair disk option can fix anything. Recovery Console doesn't help either. Why the CD read and overwrite all the old stuff on the hard drive?

  It is a good idea.

  They can have tools or diagnostic we individuals have no which can isolate the cause.