Transfer Win 7 for SSD

Similar Questions

• Portege Z930 - need of external controller for SSD drive internal

  My Board TOSHIBA Portege (ex-portable) (Z930) burned with hot water. I removed the small SSD and now need to transfer the data with a USB drive on another PC.

  I borrowed from a friend a SATA USB adapter with 2 interfaces and even small connectors for SATA was not small enough for SSD from TOSHIBA. Apparently, I need a special SATA USB adapter that installs on TOSHIBA Portege mSata.

  The reason why I wrote here is because there are many SATA USB adapters in internet advertised, but it seems that they have larger connectors. While TOSHIBA calls the marked thereon mSATA SSD, but several people call mSATA for one size larger SSD.

  I don't want to order that something does not again. Is there someone who already removed SSD Portege?
  Could you give me a link for such adapter?

  The laptop was equipped with a chip HM77 Intel Panther Point and with the launch of the Intel chip allowed laptop manufacturers to integrate SSD form factor mSATA (micro SATA).

  There is also a difference between the mSATA form factors
  The mSATA being limited to four chips (NAND) only, Intel has developed a new standard mSATA called m2 or mSATA2.

  In many cases, this is also called NGFF (new generation form factor)
  This standard m2 is longer and has more low a profile

  I'm not sure if this Z930 Portege supports mSATA or mSATA2, but you check the internal SSD drive where this information should be available

• HP COMPAQ 8200 Elite Micro Tow: Can you tell if this system has slots for SSD or hdd adapter necessary - & gt; SSD?

  Can you tell if this system has slots for SSD or hdd-> ssd adapter need?

  WIN INITIAL 7pro

  i5-4-core - 16GB - RAM - fresh install [new 1 TB HDD] 8.1pro win 10pro Win

  HP COMPAQ 8200 Elite Micro Tower

  P / N:XY139EA #AB7

  PURCHASED 07/03/2012

  For w10pro c: / recommend reinstall to ssd or migrate ssd or even is...?

  SSDS all have sons the same size and holes threaded on the bottom and sides.  They all use the same fine metric threads live short (short, so they don't lower).  These screws must come with the adapter, and I live in general using the lateral holes.  Parts of the adapter have threaded, 3 holes and you will use the back ahead and away from those for channels of the drive Bay.  If you look at each side of a standard 3.5 "HDD, you will see the same same spacing holes.

  Some jobs need the SSD to shift to the left so the orientation of the SSD SATA power and data ports match exactly where they would be if the current drive was a 3.5 "HARD drive clutter.  An example is the drive in a Z620 of drawers which accept 3.5 form factor devices "and slides of drawers in the deep part of the case and automatically mesh with ports of power/data SATA back inside.

  Jobs that fuel just a loose cable and the data cable for the SSD is really doesn't matter much if the SSD is an adapter which keeps it more centered or offset to the left.  I've seen cases where a disk HARD 3.5 "given in the lower Bay and a centered SSD is in the upper drive Bay and there was nearly not enough cable length to reach easily shifted left for drives staggered in the Center.  You can see in the photo below that the Garland of feeding on the HARD drive has two unused SATA power below connectors, and there is not a lot of room between them.

  The card you chose seems good... solid metal.  For the HP 8200 Elite CMT I have access to screws 4 total special 6-32 UNC silver HP threaded screw threaded back ahead and away from the screw holes on both sides of the adapter, and then you use the extraordinary end threads metric short screws mentioned above to fix the SSD to the adapter, as shown in the pictures of Amazon.  These HP silver screw 6-32 no metric I'm talking using Torx or flat screwdriver and their leaders are trained to slip into the channels of the drive Bay.

  There are also other designs which are designed specifically for some HP workstations that include mounts insulation rubber with the sliding mechanism.  I don't think you have that... Here is a picture of eBay one of the 8200 Desktop Elite CMT demonstrating the existence of space on the left for 8 of these silver screw to store, which 4 are missing and used on 3.5 "single drive, you see there.  Don't throw those... they are not something, you can go to Ace hardware and buy.

  

• Reference Dell inspiron 15z / win 8 / disk ssd problems

  Well, tell me how it works,

  I have dell inspiron 15z with 500 GB hard drive with laptop want to exchange it to 120 GB ssd, but I can't because no media to reinstall and the whole system is on hard Bank...

  I tried to do with software usb recovery dell preinstaled originally, but when I start to install the ssd system it gives me the error message that the new hard disk must be at least 465 GB

  I tried to copy the partition that I tried to do the recovery with another software image, it simply does not. When I tried to install win from another cd that he refuses the number series, even when I used the same version. instead of this test of dell to kill my mood why don't they have just not preparing the software backup and restore Dell to facilitate the use and for SSDS too?

  I would gladly appreciate any help

  Hi Thomiq,

  The backup and restore software would seek similar configuration during the restoration. If the hardware is changed the original image may not work.

  At this point, I see that you will need the operating system disc to reinstall it on the SSD drive. Please send me a private message with serial number of the computer, name registered during the system purchase and email address so that I can check out what we can do. To send a private message, click on my name, and choose Start conversation.

• HP elitebook 840 g3: need driver Win PE for hp elitebook 840 g3

  Hello

  I need driver Win PE for hp elitebook 840 g3.

  I download ftp://ftp.hp.com/pub/softpaq/sp73001-73500/sp73204.exe

  But I don't have the driver of WinPE.

  Where I can finf them?

  Thank you

  HP Windows PE 3.0 Client x 86 and x 64 package driver

  http://FTP.HP.com/pub/caps-SoftPaq/CMIT/SoftPaq/WinPE3.html

  64 bit

  sp71913\hp_dt_nb_wks_1.05\x64_winpe3\network\intel\P00KEKB2\Flat\Win7-x64\E1D62x64.inf

  sp71913\hp_dt_nb_wks_1.05\x64_winpe3\network\intel\P00KGXB2\Flat\E1D\E1D62x64.inf

  sp71913\hp_dt_nb_wks_1.05\x64_winpe3\network\intel\P00JPKB2\Drivers\E1D62x64.inf

  32 bit

  sp71913\hp_dt_nb_wks_1.05\x86_winpe3\network\intel\P00KEKB2\Flat\Win7-32\E1D6232. INF

  sp71913\hp_dt_nb_wks_1.05\x86_winpe3\network\intel\P00KGTB2\Flat\E1D\E1D6232. INF

• Re: Need to win 7 for my L750 Pro Satellite recovery disk

  Hi all

  Could someone tell me where to download or get a copy of the OEM Win 7 for my L750 Pro Satellite recovery disk? The laptop has a new HARD drive without a job recovery partition and I don't have the recovery CD.

  Help please.

  > If you have not done some recovery disks, toshiba very kindly will give you some... for $66!
  Of my knowledge in Europe you can get it for 30

  However, as you say, there is an option to create recovery disk _For free_ and this must be done on the first day of the purchase. In case something goes wrong with the HARD drive, you can use these recovery disks to reinstall the _For free_ system.

  By the way: the license at the bottom of the device key belongs to the version of Windows OEM preinstalled on your laptop. Its share of the recovery image.

• Win 10 for C30 driver matrix

  Where can I find a kind of matrix driver Win 10 for my C30?

  http://support.Lenovo.com/us/en/products/workstations/ThinkStation-c-series-workstations/thinkstatio...

  Select Windows 10 64-bit from the menu drop down and you will receive everything in a single list.

  Keep in mind that win 10 install almost every driver during installation as long as it is connected to the Internet. Chances are that you will have anywhere between zero and only a few drivers to install manually.

• iPAQ214 WIN Activesync for WIN8

  Hello

  How can I synchronize between iPAQ214 and Office2013 on WIN8?

  P. S.

  In the past I did this by WIN activesync for Windows XP (office).

  This software is not compatible with WIN8 (laptop).

  Thank you.

  Please see the separate iPaq forum that is bound in wire "stickied" iPaq at the top of this map.

• HPM9265: HPM9265 AHCI support for SSD

  Y at - it a reliable update for the 'Intel Matrix Storage manager Option ROM v 7.6.6.1002 ICH9R' which will allow my SSD running with AHCI?

  You are the very welcome.

  Trim is not supported in your PC, as it is.

  Unfortunately, I do not know what the consequences are for not having not TRIM support.

  I cannot say if adding a third party sata controller would be better than what you have now.

  There are several different cards to choose from, but which is the right one for the scenario that you are?

  I have seen that some say 'support for SSD.

  Who didn't tell me much.

  Some people say that the PCIe x 1 slot slows down the drive.  Others say it's faster.

• Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  Where the log file is located (Win Vista) for the actions of OTHER USERS have taken to using the boxes in user account control?

  I use the version of Vista Home Premium.

  While I don't really like how the UAC area enters the information that tells it when to display the box tell me about your work of things on the UAC (I know an article exist on the web), is not how to answer this question.

  There is no log of UAC elevation file.

• Use of the COMPENSATOR for SSD

  Can someone enlighten me on how to use the TRIM for my SSD function? According to Windows, the TRIM is enabled. What I need to know, is if it is a function that is called and executed automatically by the system? Or is this something that I need to manually call as a routine preventive maintenance (similar to the use of defragment)? Thanks for any advice.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Useful information for SSD users with NVIDIA motherboards:

  Even if the Trim is enabled in Windows 7, mothers nForce NVIDIA cards do not send the order to the SSD TRIM.

  You can uninstall the well Nvidia controller in Device Manager and install the controller IDE from Microsoft, that allows to send commands to COMPENSATION for SSDS.

  Head to the Device Manager (menu start open, type Device Manager), and click on "IDE ATA/ATAPI controllers" and you will see 3 Nvidia Serial ATA Controllers. Right click on one of them and click on 'Properties' and go to the tab 'Pilot' 'Update Driver '. Click on "Browse my computer", then "Let me choose". You will see the option to choose "Standard dual channel PCI IDE Controller". Click this button and click on 'Next' and let it install.

  Do the same for the other Nvidia controllers in Device Manager, and then restart your system. After you have installed the controllers, you will be asked to restart again.

  SSD will have now a slight performance gain with the TRIM command, and ordinary hard drives also have a slight increase as well.

  I have an ASUS P5N - D 750i SLI motherboard and now my Trim actually works.

• questions about the decommissioning of win 8 for Win 7

  I plan to install Win 7 Pro on my Win 8.1 on my desktop computer. My computer came preloaded with Win 8 and then I upgraded to win 8.1 by using Windows Update in Control Panel. So I have the computer manufacturers 64 bit Win 8 Support disc that came with the computer, but no Win 8.1 disk. I also have my old drive for Win 7 64-bit. My main concerns regard the problems potential decommissioning and also possible future problems if I decide to come back to Win 8 (regardless of the version then in force).

  I have two questions:

  (a) there will be problems if I decide in the future to upgrade Windows 7 Pro to whatever the current version to win 8 given that I only have my Win 8 of the manufacturer of the computer drive?

  (b) in addition to needing all the drivers for Win 7, are there other problems by going win 8 for Win 7?

  If you want to downgrade to Windows 7.

  You will first need to go to the website of manufacturers for your model computer and first find out if there are native drivers in Windows 7. A large number of computers that are preloaded with Windows 8 have no native driver support for Windows 7 by the manufacturer.

  If there are native drivers for Windows 7, there should be a problem.

  Prior to decommissioning, I highly recommend facility backup the Windows 8.1 currently on the disk, so if you decide to go back to Windows 8, you can simply save your data in Windows 7 and restore the image of Windows 8.1. Learn how to:

  How to create the System Image in Windows 8.1

  Decommissioning:

  http://www.PCMag.com/Article2/0, 2817,2417359,00.asp

• Please help find the driver win 7 for sharp AM-400 MFP

  I have Windows XP driver for my Sharp AM - 400 multifunction printer. I tried to install it in different compatibility mode to work on win 7 but without success.  Please help find the driver win 7 for sharp AM-400 MFP. Regarding the LEP

  Think that its too old. I think its time to get another printer

• When I bought my laptop Samsung Win7 he promised to upgrade to win 8 for $ 15. Why is now $ 39?

  When I bought my laptop Samsung Win7 he promised to upgrade to win 8 for $ 15. Why is now $ 39?

  see this:

  http://Windows.Microsoft.com/en-us/Windows/upgrade-offer

• Error installing Webgate 10.1.4.3 on Win 2003 for IIS

  Hello

  Spin on an issue where I get an error with a dialog box "User input panel" and the below error

  There is an error. Please try again.

  Oracle_Access_Manager10_1_4_3_0_Win32_ISAPI_WebGate.exe running on Windows Server 2003, but I get the above error. He cannot understand what is the real error. Anyone done a facility of webgate in win 2003 for IIS please let me know what Miss me a document or blog that can report on the steps to install webgate 2003 for IIS. What are the configurations that I do. All I need to backup before installation, etc., that I installed webgates OSH but not for IIS is the first and already running on a question.

  
  Windows 2003 Standard Edition with SP2

  IIS 6.0

  Any help is appreciated.

  Thank you

  Hello

  You may need to specify syntax 8.3 in the path of the directory - please see Doc ID 1348444.1 for more details.

  Kind regards

  Colin