Try to connect to a modem ActionTec C1000a wireless

Similar Questions

• Actiontec c1000a compatible with vista?

  Actiontec c1000a wireless modem is compatible with vista?

  Hello

  Yes

  http://www.Actiontec.com/264.html

• No internet access when it is connected to the modem

  HI I have an Ethernet cable modem BEFMCU10 model v3 connected to a Netgear n100 v2 wireless router. The modem works only when it is connected with the wireless router. When I try to connect Ethernet. Modem to PC, it does not connect, there is no internet access. My ISP is Comcast (Xfinity). It's really weird because how is it possible that theres internet via wireless, but when I connect my modem via Ethernet, I have no internet access

  I remember the first time I activated my modem there is xfinity software that did something to my modem but I don't think it has to do with anything he just install something in my laptop. I did a clean install of the software or anything has been removed.

  > Sometimes I download things and I prefer to use the physical connection because its faster.

  You will get the same benefits and an easier time using a wired connection to your router, rather than the modem.

  > My prolem is resolved, I followed your instructions, thank you

  You are welcome. Please mark as replied to close the issue.

  > is - this quite useful to purchase a Docsis 3.0 modem

  You can check this with your cable provider, but probably not.  Unless you have a very high speed (usually of company type) cable plan there would be no advantage.   You also must be sure that any modem you purchase is compatible.

• When I try to connect to the internet via the usb cricket modem thing, I get an error entry ras error creat/change also error 1068

  Original title: new laptop user

  I recently got a laptop EEE. When I try to connect to the internet via the usb cricket modem thing, I get an error ras entry creat/change. I tried to set the automatic start, but when I click the button start I get an error 1068. Any help?

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  "Error 1058" error message appears when a service stops unexpectedly

  http://support.Microsoft.com/kb/241584

  Also refer to this article and check if it helps:

  "Error 1068" error message when you try to enable Internet connection sharing

  http://support.Microsoft.com/kb/827328

  Note: Also valid for Windows Vista

• error when you try to connect to the internet via a modem usb - 6 error: the handle is invalid

  error 6: the handle is invalid - I see this error message when you try to connect to internet via usb modem

  I'm using windows Vista Home Basic and attempts to connect to the internet via a usb Huawei modem.

  but when connect this device on windows xp pro his works very well.

  but with vista I see this error msg

  The handle is invalid

  any idea to solve this problem?
  Thank you

  You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you shouldat least make the modem and everything you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  Try to uninstall and then reinstall the modem again.  Remove the modem through Control Panel > phones and Modems, then uninstall the modem in Device Manager. Once the reboot is complete and it is reinstalled it should work (as long as you use the update of the above paragraph).  Make sure that you uninstall in this order.

  Are you sure that the modem is compatible with Vista and the rest of your system?  What is the manufacturer, brand and model?  You can find here:http://www.microsoft.com/windows/compatibility/windows-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I try to connect to my internet in my house is not picking up my my modem signal... any suggestions

  Since the other night, I tried to connect to internet in my house and for some reason that my computer will not pick up the signal from the modem. It does not make sense to me. He'll go get my neighbors and other peoples but not mine. My office receives the signal very well, but my laptop will not.

  Hello

  All changes made to the computer before the show?
   
  Method 1:
  Check out the link and follow the steps.
  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
   
  Method 2:
  You can also visit this link and follow the steps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  Method 3:
  Check out the link and follow the steps in section allows you to configure a wireless connection.
  Setting up a wireless network
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

• I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  Date and me are dealt with by the network. Try restarting your router/modem...

  Verify that DNS is set to auto

  Make sure port 123 is open on the router (refer to the manual of the router to you)

• Satellite M60: Little or no connectivity with the Modem cable

  Hello.

  I just got a Satellite M60, and I'll have limited connectivity or none when I try to connect to the internet via my Modem cable through the local network.
  OS is WIN XP Home SP2 PTG and I restored the original instalation, but nothing seems to work.
  Can anyone help?

  Thank you

  Hello

  What do you mean by limited connectivity?
  Did you check the system for viruses and worms?
  On the other hand, the active virus protection software can make your stream slowly or active. In addition, you check the cable lan for a few bows.

  Good bye

• R8500 disorder connect through C1100Z modem (Qwest)

  I'm having difficulties to keep the connection or sometimes even to make connection through my modem. (the modem) works on its own, but I bought this router on Ebay non-recorded. Any help appreciated.

  Finally had time to try this, I went all the way to clone the mac address of the cpu and well. Thank you

• Router will not connect to internet (modem Comcast)

  I have had this router for a few months with no problems. But this morning all my computers says limited connection... I'm still on the network, but not internet available.

  I tried to unplug the power on the modem and the router, but the same thing happens. If I connect a computer directly to the cable modem, I have access to the internet very well, which leads me to believe that it's a junk router.

  R7000 genius says not connected as well...

  Any ideas/suggestions?

  haw1144 wrote:
  Any ideas/suggestions?

  
  Since you seem to be getting an Internet connection very well when the connections of a PC connected to the modem, I would recommend that you try to spoof the MAC than PC. To do this simply:

  From the PC that you are able to access Internet when connected directly to the modem, connect a cable to one of the four on the R7000 LAN ports. Connect to it via http://192.168.1.1/ with admin as user name and password as password. Click Advanced , and then select Setup -> Internet Setup. Make sure everything is set to automatic and dynamic and to the last option for The MAC address of the router you choose to use computer MAC address. Click apply and wait for the page to come back. He should get back to work now!

  If it still doesn't work, please tell us how the Internet light on the front of the router is turned on (the globe).

• "Error 638: the remote server is unresponsive in a timely way", when I try to connect to the Internet.

  Title: "error 638: the remote server is unresponsive in a timely way." What in the world is that supposed to mean?

  I have known the above error (for 2 weeks now) whenever I try to connect to the internet via modem huawei e160. I have not installed any programs recently. I physically contacted my ISP and according to them, the modem works properly and that the problem is with my computer. A professional COMPUTER friend told me that he once experienced a similar problem and the solution in the end was re - install the operating system. I did as much with PC to get back that far. Someone please help coz it is a nightmare.

  I had the same problem. And just uncheck the 'Operator operator-assisted' Option on the "Advanced" tab in the window 'Manage settings of the map' did the job. Try it. You will surely succeed.

• Boxes wireless printer work without connection to the modem HP 6700 printer

  My printer is located on the second floor of our House. It is connected to our network with the modem and the router to the first floor where my wife's computer. This connection works fine.

  My problem is that my printer only works if connected to my computer with a USB cable. This limits the use of a number of functions of the printer. Print the test pages that I myself say the printer is connected to the home network, but the printer will not work without the USB cable that turns off the Wireless function.

  Most of the instructions I've read show that I need to be connected to the modem downstairs to work. It is not possible that I can tell.

  Is there a way to fix this? or is a wireless connection to my printer not possible with this configuration?

  Thanks for your help

  Bill6700

  Bill,

  Welcome to the HP Forum.

  You don't mention what kind of computer of mystery that you have and try to use the printer.

  Assuming that the full feature software is available for the operating system of your computer, this may solve the problem - multiple computers can print once installed wireless printing software.  I hope that your computer is among the supported systems.

  General instructions to install the printer software

  Reminder:

  1. In most cases, the Solution Center has been replaced by the wizard of the printer.
  2. Shortcuts to the Printer Wizard must be installed on your desktop during the last part of the installation.

  Windows operating system:

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8
  • Open drivers HP & downloads
  • Enter your printer model information
  • Select your printer in the list of the 'results '.

  OR

  • Open printer HP Officejet 6700 Premium e-All-in-One - H711n drivers
  • Enter your operating system the menu drop-down
  • Click NEXT and scroll down
  • Find the driver - product Installation software category
  • Select the driver of base, e-print, or full software functionality
  • Save the package *.exe Setup on your computer

  The files will probably save in the "folder"downloads. "

  Don't forget to search for updates as necessary for your installation. If available, you can download print and scan doctor and / or other programs of category - utilities.

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  • Look at the bottom half of the main Web page for your printer for helpful videos help with the installation of the printer software!
  • Scroll through the list of videos back until you find the video that best fits your situation.
  • If you use a USB connection: download and install the driver software before connecting a USB cable.
  • Ethernet: connect the printer to the network and (optional) assign the printer IP address to the router. Once the printer is connected to the network, make sure that the printer is on, and then install the printer software.
  • Once the initial installation is complete and functional, check / install category - updated

  There is valuable information about the Web site, including your Manual, sections for Troubleshooting > How-to's, Troubleshooting > solving a problemand alerts and notifications for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Click on accept as Solution when the answer is a good solution or workaround!

  Although I strive to reflect best practices of HP, I do not work for HP.

• Unable to connect with the modem router e2500

  I have an old Speedstream 5100 modem hooked to my router e2500. Everything works well except if for any reason any my modem disconnects from the ISP I can not log in via the route to reconnect it. I need to connect a cable modem to computer direct run connect script then modem plug in router all is well again.

  Any ideas why the connection to the modem router is blocked?

  Thnaks,

  Al

  al_mathews wrote:

  My Speedstream has only an Ethernet connection so I did not know that he resembled a router for the local network. I changed the mode of bridge on the PPoE configuration on e2500 / Speedstream and reconnected to the ISP on the e2500 configuration screen. Who can solve the problem of reconnecting from now, it is run on the e2500.

  One thing I see now is since I left the modem IP set to 192.168.0.X can't do it all through the e2500. Is it because my DHCP in e2500 is configured with 192.168.1.X range IP modem is not covered in my network? If I directly connect Speedstream and place you IP 192.168.1.X will become visible on LAN?

  You are unable to access the modem even if you have a PPPoE connection. For PPPoE the E2500 will not need an IP address from the modem so it does not have DHCP on WAN port and so we never see. When you try to access the address of 192.168.0. * the E2500 it will route through the tunnel PPP to the ISP.

  If you connect your computer directly to the SpeedStream it should automatically get a DHCP address (assuming that the computer is still ongoing on the DHCP protocol and not with a static IP address and the SpeedStream does not automatically neutralize the DHCP server in Bridge mode). If you have configured a static IP address on the computer, you must change the IP address to an address of 192.168.0. *.

• Trying to connect using a 4 G Verizon Wireless USB Modem

  I'm tying to get an internet connection through my company of Verizon Wireless, with a 4 G USB Modem.  The latest information I got from them were to download a newer version of the VZ Access Manager from the internet.  When I did all downloaded correctly except the pilot does not, and then I learned that he was a "problem of Microsoft in all areas" and that I had to download a Pack from XP Smart.  However I get my updates on a regular basis and have done everything in my power to get my Vista Home Basic 32 Bit updated computer and keep says he is up to date and that the driver works correctly.  I have connected wih this unit for a day and 1/2 then it stopped working and I have not been able to operate since.  I logged until I downloaded the new version of VZ Access Manager.  I've uninstalled and reinstalled the software several times and have changed my USB port as well and even luck now, any ideas.  The new version has been for Compuers using Vista 32/64 and Windows 7.

  Hello

  Do you have an error message when you try to connect to Verizon Wireless USB Modem?

  Send the request in the Verizon wireless Support for assistance.
  http://support.verizonwireless.com/CLC/

  Hope this information helps.

• When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

  VIsta - Local access only

  HI -.
  I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

  The router also works very well I'm able to connect with my iPhone and IPad without any problem.

  But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

  It's a Dell Studio 15 with Vista.

  The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

  I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

  This has been very frustrating.   Thanks in advance for any help or suggestion.
  Staci

  Hello Staciusa,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.