twice monthly BSOD on Server 2012
We have a few random BSOD on a server of 2012, drivers are updated, and Driver Verifier is enabled, please, can someone help me try to understand what can be the cause of this error?
Here's my dmp files:
https://onedrive.live.com/redir?RESID=26D62B7003B74D69%21125
BTW, should I disable the Auditor by car? and if so, how can I disable it?
Kind regards...
Hello
CACHE_MANAGER (34)
This indicates that a problem has occurred in the file system cache manager.
STANDARD ATTRIBUTES:
[X] (automatic controls 0x00000000)
[X] (0x00000001) special pool
[X] (Control Force IRQL 0x00000002)
[X] (0x00000008) followed by Pool
audit of I/O [] (0x00000010)
[X] (detection of blockages 0x00000020)
[] (0 x 00000080) audit of DMA
[X] (controls security 0x00000100)
[X] (various controls 0 x 00000800)
[X] (verification of the conformity of the DDI 0 x 00020000)
Auditor is enabled, please disable it. It does not help us for that bug control.
> How do I turn it off?
Launch of verifier.exe type Auditor/Reset , and restart.
0: kd > .exr 0xffffd0015e955708
ExceptionAddress: fffff8007f383f97 (nt!) CcGetVirtualAddressIfMapped + 0 0000000000000057 x)
ExceptionCode: c0000005 (access violation)
Access violation has occurred in nt! CcGetVirtualAddressIfMapped + 0 x 0000000000000057.
Rax = 0000000000000000 rbx = 0000000000000000 rcx =0000000000000011
RDX = 0000000000000000 rsi = 0000000000000000 rdi = ff00e00050977c78
RIP = fffff8007f383f97 rsp = ffffd0015e955940 rbp = 0000000000000000
R8 = 0000000000000000 r10 = ffffe0004b1d5fb8 ffffd0015e9559ec = r9
R11 = ffffd0015e9557e0 r12 = ffffd0015e955a38 = 0000000000000000 r13
R14 = ff00e00050977c10 r15 = 0000000000000000
iopl = 0 nv up ei pl zr po nc
CS = 0010 ss = 0018 ds = 002 b're = 002 b fs = 0053 gs = 002 b efl = 00010246
NT! CcGetVirtualAddressIfMapped + 0 x 57:
fffff800'7f383f97 f0480fb10f lock cmpxchg qword ptr [rdi], rcx ds:002 b: ff00e000 50977 c 78 =?
The immediate case of the accident has been a failure to compare the destination to the source (rdi register) value. Why did it fail?
Our destination address is not valid:
0: kd >! PTE 0000000000000011
GO 0000000000000011
PXE to the EPP of FFFFF6FB7DBED000 at FFFFF6FB7DA00000 at FFFFF6FB40000000 at FFFFF68000000000 PTE POE
contains 21200000010F7867 contains 0000000000000000
GetUlongFromAddress: cannot read fffff8007f5db104
NFP 10f7 - DA - invalid UWEV
-----------------------------
IMO, it's the fault of the conflicts of system files causing Norton.
Remove and replace Norton with integrated Windows 8 Windows Defender to temporary troubleshooting purposes, such that it is very likely that the problem:
Windows Defender (how to activate after removal)
A.Navigate ofControl Panel (with icons). You can do this by typingStart > Search > Panel. Once in the Control Panel change the drop-down menu of thecategory to large or small icons.
B.Among list icons, and then click Action Center.
C.Assuming that the deletion of your previous anti-virus software has gone well, you will notice for unexpected and spyware software (important) protection and Virus protection (important), it will have a button that says turn on now. Click on this button (no matter that, as Windows Defender is as well used in Windows 8/8.1).
Kind regards
Patrick
Tags: Windows
Similar Questions
-
BSOD Windows Server 2012 starting MSMQ service
Hello
We have a problem with a server get BSOD when we start a service related to MSMQ. Whenever we start the service as a user on the field, we get the noexecute BSOD memory execute attempt. When we start the service as local system, it starts without a problem. I got the crash dump here:
Symbol of validation of the path summary *.
Location of response time (ms)
Deferred SRV * c:\symbols* http://msdl.microsoft.com/download/symbolsMicrosoft (R) Windows debug 6.3.9600.17298 AMD64 Version
Copyright (c) Microsoft Corporation. All rights reserved.Loading dump file [C:\170\120314-11828-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are availableSymbol of validation of the path summary *.
Location of response time (ms)
Deferred SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (4 procs) free x 64
Product: Server, suite: TerminalServer SingleUserTS
By: 9200.16912.amd64fre.win8_gdr.140502 - 1507
Computer name:
Kernel base = 0xfffff800 '48476000 PsLoadedModuleList = 0xfffff800' 48742aa0
The debugging session: Wed Dec 3 14:41:01.892 2014 (UTC + 01:00)
System Uptime: 0 days 0:04:09.904
Loading the kernel symbols
.Press (cdb, ntsd, kd) ctrl-c or ctrl-BREAK (windbg) to drop the charges of symbol that take too much time.
Run! SYM noisy before .reload to track symbols loading issues...............................................................
................................................................Loading user symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.
Verification of error CF, {7f982e340e0, 791000010fdb1025, fffff8800485a5e0, 80000005}
Probably caused by: mqac.sys (mqac! ACCreateQueue + a77)
Follow-up: MachineOwner
---------1: kd >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (CF)
An attempt was made to execute non-executable memory. The guilty driver
is on the stack trace (and usually the current instruction pointer).
When possible, the name of the guilty driver (Unicode string) is printed on
verification error screen and saved in KiBugCheckDriver.
Arguments:
Arg1: 000007f982e340e0, virtual address for the execute attempted.
Arg2: 791000010fdb1025, content PTE.
Arg3: fffff8800485a5e0, (reserved)
Arg4: 0000000080000005, (reserved)Debugging information:
------------------CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT_SERVER
BUGCHECK_STR: 0XFC
Nom_processus: mqsvc.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers (dbg). 141024-1500) amd64fre
TRAP_FRAME: fffff8800485a5e0-(.trap 0xfffff8800485a5e0)
NOTE: The frame trap does contain not all registers.
Some registry values can be set to zero or incorrect.
Rax = 000007f982e0c950 rbx = 0000000000000000 rcx = 0000005dff1fecd0
RDX = 0000005dff34e988 rsi = 0000000000000000 rdi = 0000000000000000
RIP = 000007f982e340e0 rsp = fffff8800485a778 rbp = fffff8800485ab80
R8 = fffffa800e623980 r9 = 0000000000000521 r10 = fffffa800ec547a0
R11 = 0000000000000006 r12 = 0000000000000000 r13 = 0000000000000000
R14 = 0000000000000000 r15 = 0000000000000000
iopl = 0 nv in pe of na EI pl nz nc
000007f9'82e340e0? ???
Reset the default scopeLAST_CONTROL_TRANSFER: from fffff80048661ef1 to fffff800484d0540
STACK_TEXT:
fffff880 '0485-408 fffff800' 48661ef1: 00000000'000000 fc 000007f9 '82e340e0 79100001' 0fdb1025 fffff880' 0485a5e0: nt! KeBugCheckEx
fffff880'0485 has 410 fffff800'48588980: fffff880'0485a5e0 ffffd8e9 '9e6056e2 fffffa80' 0ec547a0 00000000' 00000000: nt! : FNODOBFM: 'string' + 0x33f2d
fffff880 '0485-450 fffff800' 4850aabd: fffff880 '0485 a 500 00000000' c0000016 fffffa80 '0e603b00 fffffa80' 0e623980: nt! : FNODOBFM: 'string' + 0x33e85
fffff880 '0485a4a0 fffff800' 484cdfee: fffff880 00000000'00000008 00000000'00000000 00000000'00000000 ' 0485a5e0: nt! MmAccessFault + 0x3ed
fffff880 '0485a5e0 000007f9' 82e340e0: fffff880'00dc5297 fffffa80 '0ec54770 00000000' fffff8a0 00000000' 011ce7c0: nt! KiPageFault + 0x16e
fffff880 '0485-778 fffff880' 00dc5297: fffffa80 '0ec54770 00000000' fffff8a0 00000000' fffff980 00000000' 011ce7c0: 0x000007f9'82e340e0
fffff880 '0485-780 fffff880' 00dc60d7: 00000000' 0000005d 00000000 ' ff34e988 00000000'00000000 00000000'00000000: mqac! ACCreateQueue + 0xa77
fffff880 '0485a7f0 fffff800' 488ab127: fffffa80 '0e5ed520 fffffa80' 0d50ecf0 00000000'00000521 00000000'00000000: mqac! ACDeviceControl + 0x62b
fffff880 '0485-890 fffff800' 488c02f6: 00000000 00000000' fffff8a0'00000080 00000000 '00000000 00000000' 00000000: nt! IopXxxControlFile + 0x7e5
fffff880 '0485aa20 fffff800' 484cf553: 00000000'00000000 00000000'0000000 c fffff6fb '7dbed078 fffff6fb' 7da0ff30: nt! NtDeviceIoControlFile + 0 x 56
fffff880 '0485aa90 000007f9' 8a702c1a: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiSystemServiceCopyEnd + 0x13
0000005d 'ff34e928 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x000007f9'8a702c1aSTACK_COMMAND: kb
FOLLOWUP_IP:
Mqac! ACCreateQueue + a77
fffff880'00dc5297 85 c 0 test eax, eaxSYMBOL_STACK_INDEX: 6
SYMBOL_NAME: mqac! ACCreateQueue + a77
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: mqac
Nom_image: mqac.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 5010abc2
IMAGE_VERSION: 6.2.9200.16384
BUCKET_ID_FUNC_OFFSET: a77
FAILURE_BUCKET_ID: 0xFC_mqac! ACCreateQueue
BUCKET_ID: 0xFC_mqac! ACCreateQueue
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0xfc_mqac! accreatequeue
FAILURE_ID_HASH: {d1daca31-6256-358c-65b5-69af54392880}
Follow-up: MachineOwner
---------Try asking in the Windows Server forum:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer -
Windows Server 2012 R2 BSOD 0x0000013c
Hello
I have some problems with one of my files Windows 2012 R2 servers. Each week the server crashes with a BSOD INVALID_IO_BOOST_STATE (code: 0x0000013c). Some research told me it should be a pilot with a memory leak.
Client: Windows Server 2012 R2 update, 10, LSI Logic/Paravirtual storage controller hardware version (tried both), NIC vmxnet3
Host: HP Proliant DL380G7 and G8, ESXi 5.5 Update 1 and 2
3 other files with the same configuration servers have no problem, they are all from the same model.
Like I don't know what else to do, you have any suggestions how to fix?
Thanks in advance!
Best regards
Roland Schauer
Oh wow, haven't seen it for a long time.
as for my analysis, it seems that your security software Trend Micro goes haywire in your system. Your OS crash caused by OVERLAPPED_MODULE: address regions of overlap 'TmXPFlt' and 'TMEBC64.sys'. Where 'TMEBC64.sys' belongs to 'Start clean boot Driver' Trend Micro and the TmXPFlt seems to have some sort of basis for security suite library. The threading button somehow an invalid memory, the operating system enters a kernel panic. I suggest another solution of security or patch up to the latest version available - application and operating system.
Roland, can you send us your landfills so we can take a look at as well?
-
5.0 VMware Server 2012 P2V fails with BSOD
Someone at - it successful Windows Server 2012 with VMware 5.0 installation? I have not tried since an ISO, but when I tried a P2V server restarts periodically and says then there is a problem and that I should look for more information on the 'system thread unhandled exception (winhv.sys)' error as it collects more information!
Thank you
Mark
Construction 623860 is ESXi 5.0 Update 1, so it's ok. You can find an overview of the large version/construction at http://vsphere-land.com/vinfo/release-build-info
Roles that are installed in the system Windows 2012 (Hyper-V,...)?
BTW. the converted virtual computer runs on a virtual IDE drive. During the conversion of a physical system, you must always set the type of appropriate ("LSI Logic SAS controller" in this case) in the Converter Wizard.
André
-
Windows Server 2012 R2 - HF ALL them do not install as "does not apply to this computer.
Hello
A general question about patch installs.
I have several servers which are all Windows 2012 R2. They don't have internet connections, so I have to install the patches manually. I have download the HF from the download page of the ISO (https://support.microsoft.com/en-us/kb/913086) every month. I collect them and install in a facility in bulk during a release cycle (once or twice a year). I just realized that no. HF have installed since JUNE 2014. Each HF that appears in the directory WindowsServer2012R2 do not settle with a message "the update is not applicable to your computer. Which is fine if that was true, but... I get this message for each HF ISO since June 2014. NOT a single HF, it's applicable to my computer. Would this be the case? No HF apply to my 2012 since June of 2014 server systems?
This is my system information, and below that is the result of any attempt to install 95 HF
C:\Temp>Systeminfo
Host name: MYHOST
Name of the operating system: Microsoft Windows Server R2 Datacenter 2012
OS version: 6.3.9600 n/a build 9600
OS manufacturer: Microsoft Corporation
OS Configuration: Member Server
OS Build type: multiprocessor Free
Registered owner: Windows user
Registered organization:
Product ID: 00252-80025-36226-AA727
Original installation date: 13/06/2014, 08:04:39
Starting system: 16/03/2015, 14:34:45
System manufacturer: Dell Inc..
System model: PowerEdge R720
Type of system: PC x 64
Processor (s): 2 processors installed.
[01]: Intel64 family 6 model 62 Stepping GenuineInt 4
El ~ 2500 Mhz
[02]: Intel64 family 6 model 62 Stepping GenuineInt 4
El ~ 2500 Mhz
BIOS version: Dell Inc. 2.2.2 16/01/2014
Windows directory: C:\Windows
System directory: C:\Windows\system32
Starting device: \Device\HarddiskVolume1
Local system: en - us; English (United States)
Input locale: en - us; English (United States)
Time zone: (UTC-07:00) time of the Rockies (U.S. & Canada)
Total physical memory: 262 099 MB
Available physical memory: 249 337 MB
Virtual memory: Max size: 301 011 MB
Virtual memory: available: 288 015 MB
Virtual memory: in use: 12 996 MB
Office (s) swap file: C:\pagefile.sys
Domain: mydomain.sgn
Logon server: \\MYHOST
Corrections: 25 fixes installed.
[01]: KB2862152
[02]: KB2868626
[03]: KB2876331
[04]: KB2888505
[05]: KB2892074
[06]: KB2893294
[07]: KB2893984
[08]: KB2898785
[09]: KB2898868
[10]: KB2898871
[11]: KB2900986
[12]: KB2901125
[13]: KB2901128
[14]: KB2909210
[15]: KB2909921
[16]: KB2912390
[17]: KB2916036
[18]: KB2919442
[19]: KB2922229
[20]: KB2923392
[21]: KB2925418
[22]: KB2930275
[23]: KB2931358
[24]: KB2931366
[25]: KB2936068
Network cards: 6 interconnect installed.
[01]: Broadcom NetXtreme II 10 GigE (NDIS VB BCM57800
D Client)
Login name: ISCSI
DHCP enabled: no
IP addresses
[01]: 192.168.1.30
[02]: fe80::38c9:e59c:5ac2:e0a1
[02]: Broadcom NetXtreme II 1 GigE (NDIS VBD BCM57800
Customer)
Login name: NIC3
Status: Hardware not present
[03]: Broadcom NetXtreme II 1 GigE (NDIS VBD BCM57800
Customer)
Login name: MGMT
DHCP enabled: no
IP addresses
[01]: 7.48.64.32
[02]: 7.48.64.30
[03]: fe80::f14e:9339:9326:c7fd
[04]: Broadcom NetXtreme II 10 GigE (NDIS VB BCM57810
D Client)
Connection name: SLOT 5 Port 1_swport_VMRepwan
DHCP enabled: Yes
DHCP server: n/a
IP addresses
[05]: Broadcom NetXtreme II 10 GigE (NDIS VB BCM57800
D Client)
Login name: NIC2
Status: Hardware not present
[06]: Broadcom NetXtreme II 10 GigE (NDIS VB BCM57810
D Client)
Connection name: SLOT 5 Port 2_swport_VMOpswan
DHCP enabled: Yes
DHCP server: n/a
IP addresses
Requirements for Hyper-V: A hypervisor has been detected. Characteristics required for
Hyper-V will not appear.I have a script that runs each HF installation... If I manually run them without the tools I get the same results is not the script...
Install 95 patches
for Microsoft Windows Server 2012 R2 Datacenter x 64The repository path: U:\Patch Repository_4_1\2012_R2_HFs\
1 Windows8.1 - KB2894852-v2-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
2 Windows8.1 - KB2894856-v2-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
3 Windows8.1 - KB2920189-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
4 Windows8.1 - KB2926765-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
5 Windows8.1 - KB2928120-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
6 Windows8.1 - KB2931358-x 64.msu patch status: ALREADY INSTALLED - JUMP
7 Windows8.1 - KB2931366-x 64.msu patch status: ALREADY INSTALLED - JUMP
8 Windows8.1 - KB2933826-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
9 Windows8.1 - KB2939576-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
10 Windows8.1 - KB2953522-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
11 Windows8.1 - KB2957151-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
12 Windows8.1 - KB2957189-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
13 Windows8.1 - KB2957689-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
14 Windows8.1 - KB2961072-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
15 Windows8.1 - KB2961887-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
16 Windows8.1 - KB2962872-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
17 Windows8.1 - KB2964718-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
18 Windows8.1 - KB2964736-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
19 Windows8.1 - KB2965788-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
20 Windows8.1 - KB2966072-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
21 Windows8.1 - KB2966826-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
22 Windows8.1 - KB2966828-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
23 Windows8.1 - KB2971850-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
24 Windows8.1 - KB2972213-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
25 Windows8.1 - KB2972280-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
26 Windows8.1 - KB2973114-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
27 Windows8.1 - KB2973201-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
28 Windows8.1 - KB2973351-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
29 Windows8.1 - KB2974008-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
30 Windows8.1 - KB2976627-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
31 Windows8.1 - KB2976897-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
32 Windows8.1 - KB2977292-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
33 Windows8.1 - KB2977629-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
34 Windows8.1 - X-KB2978668-64.msu patch status: DO NOT APPLY to THIS COMPUTER
35 Windows8.1 - X-KB2982794-64.msu patch status: DO NOT APPLY to THIS COMPUTER
36 Windows8.1 - KB2982998-v2-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
37 Windows8.1 - X-KB2987107-64.msu patch status: DO NOT APPLY to THIS COMPUTER
38 Windows8.1 - X-KB2987114-64.msu patch status: DO NOT APPLY to THIS COMPUTER
39 Windows8.1 - KB2988948-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
40 Windows8.1 - KB2992611-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
41. Windows8.1 - KB2993651-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
42 Windows8.1 - KB2993958-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
43 Windows8.1 - X-KB3000061-64.msu patch status: DO NOT APPLY to THIS COMPUTER
44 Windows8.1 - X-KB3000483-64.msu patch status: DO NOT APPLY to THIS COMPUTER
45 Windows8.1 - KB3000869-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
46 Windows8.1 - KB3001237-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
47 Windows8.1 - KB3002657-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
48 Windows8.1 - KB3002885-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
49 Windows8.1 - X-KB3003057-64.msu patch status: DO NOT APPLY to THIS COMPUTER
50 Windows8.1 - X-KB3003381-64.msu patch status: DO NOT APPLY to THIS COMPUTER
51 Windows8.1 - KB3003743-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
52 Windows8.1 - X-KB3004150-64.msu patch status: DO NOT APPLY to THIS COMPUTER
53 Windows8.1 - KB3004361-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
54 Windows8.1 - KB3004365-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
55 Windows8.1 - KB3005607-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
56 Windows8.1 - X-KB3006226-64.msu patch status: DO NOT APPLY to THIS COMPUTER
57 Windows8.1 - KB3008923-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
58 Windows8.1 - KB3008925-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
59 Windows8.1 - X-KB3010788-64.msu patch status: DO NOT APPLY to THIS COMPUTER
60 Windows8.1 - KB3011780-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
61. Windows8.1 - KB3013126-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
62 Windows8.1 - KB3013455-v2-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
63. Windows8.1 - KB3014029-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
64 Windows8.1 - KB3018943-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
65 Windows8.1 - KB3019215-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
66. Windows8.1 - KB3019978-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
67 Windows8.1 - KB3020393-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
68 Windows8.1 - KB3021674-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
69 Windows8.1 - KB3021952-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
70 Windows8.1 - KB3023607-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
71. Windows8.1 - KB3036197-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
72. Windows8.1 - KB3021953-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
73. Windows8.1 - KB3022777-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
74 Windows8.1 - X-KB3023266-64.msu patch status: DO NOT APPLY to THIS COMPUTER
75 Windows8.1 - KB3023562-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
76. Windows8.1 - KB3024663-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
77 Windows8.1 - KB3029944-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
78. Windows8.1 - KB3030377-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
79. Windows8.1 - KB3031432-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
80 Windows8.1 - KB3032323-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
81 Windows8.1 - KB3032359-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
82 Windows8.1 - KB3040335-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
83. Windows8.1 - KB3033408-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
84 Windows8.1 - KB3033889-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
85 Windows8.1 - KB3034196-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
86. Windows8.1 - KB3034344-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
87. Windows8.1 - KB3035017-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
88 Windows8.1 - KB3035034-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
89 Windows8.1 - KB3035126-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
90 Windows8.1 - X-KB3035131-64.msu patch status: DO NOT APPLY to THIS COMPUTER
91. Windows8.1 - KB3035132-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
92 Windows8.1 - KB3037634-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
93 Windows8.1 - KB3039066-x 64.msu patch status: DO NOT APPLY to THIS COMPUTER
94 Windows8.1 - X-KB3044132-64.msu patch status: DO NOT APPLY to THIS COMPUTER
95 Windows8.1 - KB3046049-x 64.msu patch status: DO NOT APPLY to THIS COMPUTERThank you
Dave
Dave,
It is a forum for specific consumers. You can find the Windows Server support in these forums:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer>
Specific Windows Server security sub-forum:
http://social.technet.Microsoft.com/forums/en-us/winserversecurity/threads>
`~` -
Windows Server 2012: unexpected system error and restart w/dump?
With the software running:
(a) CA ARCserve Backup version 16.5
(b) JAVA JDK 1.7.80
(c) tomcat 7.0.59;
(d) Symantec Endpoint Protection Version 12.1
(e) PowerChute Network Shutdown 3. 1.0
Should I plan to restart (I can only remote access) server for every 2 months?
Running (without rebooting) non-stop over 6 months ago.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Updates Windows Server 2012 faulty - stuck at 67%
For the past 3 months my server 2012 no R2 VM was the fault of updates. If this is an update to Windows Server 2012, it fails. It is not related to an update of the server 2012 specific windows, but they all fail. I can run updates updates/Silverlight IE without any problem. After that I installed them and restart it gets stuck on configures updates 67% then eventually restarts and returns and sometimes it does not many times. This is getting extremely frustrating. -Thanks for any help
Please post your query to:
https://social.technet.Microsoft.com/forums/
Server issues are better addressed there.
-
Blue screen of death (0x0000003b) on Windows server 2012.
Hello! I found a problem with windows server 2012. This server runs on a VMware virtual machine, and once of the month I get this error, but the drivers can cause this error all the time different.
For the first time this problem caused the driver AgileVpn.sys, second and third time win32k.sys. And the last pilot time named videoprt.sys caused this problem.
I spent a lot of time to search for a patch. But I have not found a necessary updates in Windows server 2012 r1 for this problem.
Maybe give me a little help or tell me what I need to do?
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
Install Exchange Server 2012 2013
I have a company that has 7 users and I want to minimize the cost but also to keep everything internal. My question is this: Exchange 2013 are installed and are working effectively on Windows Server 2012 Standard domain controller? We want to keep everything on a single server. The server would function as a file server, domain controller and have email Exchange 2013.
Note: Currently, we are running SBS 2003. We are not interested in the clouds or monthly subscriptions / annual.
Thank you.
Brett Foty
Brett
Server issues are beyond the scope of this forum. Ask them in the corresponding section on TechNet
http://social.technet.Microsoft.com/forums/en-us/home
-
Error activation product key has been used already on Windows Server 2012.
Original title: Activation error
Two days ago, I installed windows server 2012 on my PC... It has been corrupted because of virus on my USB key that I reinstalled it twice but both times, it has been corrupted... when I installed it third time Activation has failed, it is said that this product code was used on another pc... no activation now please help me... and one thing I've never done any material change
Try the phone activation, you may have to do during the week:
1. press the Windows key + X , and then click run, and then type: slui.exe 4
2. then press the ENTER"" key.
3. Select your "country" in the list.
4. choose the option "activate phone".
5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
6. explain your problem clearly to the support person.
-
My machine is installed with Ubuntu 10.10 and together as a web server for a few months.
Now, I need to totally remove the Ubuntu and install the large Windows Server 2012 RC.
Easy steps?
Post in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
Failed Installation of SQL Server 2012
I am trying to install SQL Server 2012. I downloaded SQLEXPRADV_x64_ENU.exe and tried to run. It goes through the mothins to open the file and then I offer the choice of a new installation or an upgrade to an earlier version. I select the new facility. The program begins to run, and then stops with an error message
"SQL Server Setup has encountered the following error:
Data Extractor for this request can't... »
OK there and I get the following message.
"Check online for a solution...".
Close the program.
Check online for a solution gives nothing. Then I close the program, but not before I give the floor to the option "view problem details. This is what is indicated.
> Description:
Setup of SQL Server 2012 has encountered an error.Signature of the problem:
Problem event name: SQL110Exception
P1: SQL Server 2012@RTM @.
P2: 0X6785B09D
P3: 0X48BB60BC
P4: 0X74E34741
P5: 0XBB814387
P6: RunLocalDiscoveryAction
P7: unknown
P8: unknown
P9: 0X9C1EAAA1
P10: unknown
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033On the 'forum' SQL Server, they were (are) puzzled, but one person suggested that I might need to load .net Framework 3.5.1. So I downloaded this file (dotnetfx35setup) and tried to run that. Lo and behold... nothing happens. When I check Control Panel, Microsoft .net framework 3.5.1 is not listed, so I guess that that didn't work either.
It is a brand new Dell XPS 8700 (within a month). What can I do? Tonight, I saw something hintgs that I need .net framework 2. However, in kivght else each attempt failed, I hesitate to try this.
Help!
Hello
Thanks for choosing Microsoft community.
The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
Please post your question in the TechNet Forum.
http://social.technet.Microsoft.com/forums/en-us/home
Hope this helps you solve the problem, if any question you can write us and we will be happy to help you further.
-
Hi all
After the conversion of a machine Server 2012 (that is running Hyper-V) and from VMware vSphere 5.5 I get a BSOD and system_thread_exception_not_handled winhv.sys
I know that I could use to disable the Hyper-V technology, no matter what else it could be?
~ eric
No, I was simply convert a machine that already had the active Hyper-V role. I disabled Hyper-V and transformed again and it started properly.
However, I found this article on editing the vmx file to allow a machine with Hyper-V enabled to run as a guest in VMware. http://blog.pluralsight.com/run-hyper-v-vSphere-5-1
~ eric
-
Installation of Win Server 2012 9 desktop problems
I have a 64 bit Windows 7 with 9 Workstation installed host computer.
I am trying to create a virtual machine for Win Server 2012, but I get a license error. There are other posts on this topic, but it relates to the work station 8. I tried the solutions in these messages, but I still have a problem.
I downloaded the ISO file using Internet Explorer twice. Once I used the ISO to create the virtual machine and once I burned the ISO to a DVD and tried. It always gives me this error when installing:
"Windows cannot find the Microsoft software license agreement. Make sure that the installation sources are valid, and restart the installation. »
The problem is that I tried the installation of 5-6 times and I can't spend.
All the world did this with success?
Thank you
Stem
Try this:
When you create a new virtual machine
-Choose the option: I'm going to install the operating system later. (The virtual machine will be created with a blank hard drive.)Do not type the path to the ISO file
-After the creation of new virtual machine also set the path to the ISO file (VM / parameters / CD-DVD.../Use ISO image file)
-After the execution of the new VM to install automatically saved (if not run probably on purpose = error) -
Windows Server 2012 GUI + ESXi 5
Hello
Has anyone having problems installing gui Windows Server 2012 under ESXi 5 version? Whenever I try to install the operating system, after it restarts the machine of the adaptation of the files from the disk, it sits on a loading screen without end (the blue windows icon with a circle of white dots). I tried redownloading my ISO from Microsoft Licensing Panel twice, recreating the virtual machine from scratch, but I get the same result every time.
Someone has some ideas on things to try to get the operating system invited to install?
Thank you!Are you patch 4 for ESXi 5? See http://kb.vmware.com/kb/2006859 for some good info.
Maybe you are looking for
-
HP Deskjet 1510 - will not print?
Hello Recently I bought HP Deskjet 1510, but it will not be printed. When I click on print a word document, it goes into the queue but then disappears after a few seconds - and the printer does nothing. I tried troubleshooting, but it is said that th
-
7073ca: HP DV7 7073 - corrupt BIOS
Hi all My Pavilion DV7 (7073ca), running windows 7 Professional, recently started acting very strange and then becomes unbootable. I recently installed an SSD with the cloned, OS, but I do not clone the partition HP_TOOLS (mistake #1). When you try t
-
WINDOWS 7 after installing Geforce GT 730 blends with no taskbar icon.
I started a post telling how when I add the drivers for the Radeon HD 5450 card after reboot all I have is the background with no icons, the taskbar or the mouse and ctrl-alt-delete gives me just a black screen. All this occurred when my SSD drive wa
-
Hello I tried to install a built-in desire 4500 on xp, but it will not be printed. During installation (cd), it's already past evil. Most of the installation files is reported missing and the installation program tells me (for ex) cannot find the fil
-
Photograph of high school, the Classes of Design graphic, video
PLEASE HELP: I am currently teaching photography, graphic design and video of class in high school. I have 20 new iMacs in my class. We have all of the Adobe Suite. Life is good! Our school offers each student an iPad. NEXT YEAR, they are trying to e