TZ SOHO firmware update and firewall issues

Similar Questions

• 900 Elitepad F.50 (SP68375) G1 firmware update and defect TPM, Bitlocker problem

  I recently installed the firmware recommended for ElitePad 900 G1 (sp68375.exe) running Windows 8.1 update 1

  System BIOS Update F.50 for HP ElitePad 900 G1 Tablet (c04409743)

  In order to install the update I had to suspend bitlocker drive encryption, which is a mandatory requirement in my workplace.

  After properly installing the update of the firmware and trying to catch the bitlocker encryption, Windows reports the following error:

  "BitLocker Drive Encryption error."

  Wizard initialization has failed.

  The BIOS does not correctly contacted the

  Trusted Platform Module (TPM). Contact the

  the computer manufacturer for BIOS upgrade instructions"

  I tried to re-download and reinstall the firmware update, but ended up with the same error after successfully update a second time.

  Someone else (or HP) applied this update firmware and can fix any counselor or a workaround to get BitLocker up and run again? My ElitePad is now reported as non-compliant system due to the suspension of BitLocker.

  Thank you.

  Please try latest BIOS on HP.com (F.52) for the Elitepad 900.  If it solves your problem, please check the issue as resolved.

• Windows Update and installation issues

  Hello all and thanks in advance for your help.  I have many problems installing Windows Update as well as the impossibility to install Windows Live Messenger Update.  I guess that this combination of problems is native to Windows Installer.  I disabled all the antivirus and firewall software.  When you try to install Windows Installer 4.5, I get the error message "the following updates were not installed" fix for Windows (KB942288).  Displays the update of Windows Event Viewer 'Hotfix for Windows (KB942288)' could not be installed because of an error: 2149842978 "' (command line:""C:\Windows\system32\wusa.exe" "C:\Users\Diana\Documents\Software\Windows Installer\Windows6.0-KB942288-v2-x64.msu" ").  What attmepting to install updates, the "Preparing to install" message displays without progressing.  When you try to install windows live updates, I get a meesage that interferes with the installation a conflicting application.  I rebooted several times and run Windows Installer Cleanup without success.  Any help would be greatly appreciated.  OS is Vista Ultimate x 64.

  Hello

  Try these 1 - cleaning if possible and then rerun the installer of Windows.

  Spotlight utility Windows Installer CleanUp Utility
  http://TechNet.Microsoft.com/en-us/magazine/2008.08.UtilitySpotlight.aspx

  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  -------------------------------------------------------------

  Run these to see if they can clearly until the update installs.

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Firmware update and the playback Volume

  Help!

  I just did an update of the firmware on my Sansa Fuze and I can't hear it more!

  Does anyone know how 'Cancel' the update of the firmware, please?

  Have you seen this thread?

  http://forums.SanDisk.com/T5/fuze/Sansa-fuze-insufficient-volume-after-firmware-update/m-p/139809#M3...

• IX2 - DL does not start after the firmware update and now in boot loop contant with double red lights

  I just applied the update to the latest firmware 4.1.208.33789 for my IX2 - DL and it took an extremely long time to reboot - flashing white light for 20 min on the right.

  Shooting and by unplugging power did the same result.

  I hold the reset button hardware pin and now he's in a boot loop throw up double red lights and then attempt to restart with flashing blue white and strong.

  Help! don't know what to do next.

  Hello steveappcity,

  I recommend a support incident, opening the only way I can support an imager is if she is officially released:
  https://Lenovo-na-en.custhelp.com/app/ask/

• Router Cisco has tried to take a firmware update and no longer works

  OK, so internet worked very well until Cisco Connect told me to take an update.  My connection is connected and there is no disruption during the download.  Yet the download failed again and now my power light flashes constantly and there is no internet access.  I tried to find out "How to unbrick your Cisco router", even pushed them to work, it took the update of the firmware of the cmd line.  Still does not work.  What is the problem with this thing and how to fix it?

  I finished downloading a firmware utility program and managed to get to recharge. The power led has become solid somewhere between 2-5 minutes, is however not yet connect to internet.  Found that all this factory reset will change your Internet username & password, with no way to find a new one.  You must remove the program Cisco connect from your computer and reload from the original disc.  Only then you will be in service yet.  While I appreciate the answer Helm, I was well beyond a second solution 30 reset button when I posted this lol.

• 3700 complete firmware update and continues to go internet

  I can't give you the version of the firmware now as 192.168.0.1 will not load at the moment.

  Both flashes on the front blink continuously. I have reset the router back to the factory settings and it worked for awhile but then these lights began to Flash again.

  The problem, it's the original is that after a few hours or minutes I can't access the internet on my laptop. I have to turn off my wifi on my laptop and then turn it back on and then I can browse the web again.

  Hello webmagnets

  This does not sound good if your factory at rest and still can not get into GUI page, you can contact Netgear phone support to troubleshoot and see if the modem is faulty.

  DarrenM

• Windows updates and logon issues

  Two quick questions, please:
  1: when the updates of Windows 7 contains new updates, is there a way to still display the latest updates that I refused? With XP, I could click on an option indicating that those who refused the updates would display is no longer. I have always to investigate these things and exclude those who do not apply to my situation. I don't want to have to re - investigate each of them whenever he appears.
   
  2: I have my system starts automatically for a certain user, namely me. Is it a key shot or something that would make it to start the administrator sign-in, instead, when needed, vs having to enter in the "me" user first, and then disconnect, etc.?

  Thank you. I was not able to find answers to these questions, probably because they are a little weird.

  1. you can select the update right click and select hide.  Then he stops to appear.

  2. until the Welcome screen appears, hold the SHIFT key to get to the login screen.

• anti-malware and firewall issues

  I read that it is possible for Symantec EndPoint Protection to perform analysis of disk offline with the vSphere vStorage API.

  Where can I find documentation and instructions on this subject?

  I'm working on a deployment of SEPT 11, the latest version, and it would be nice to have.

  If not, maybe I have to install the client in virtual machines and alternate their analyses etc.

  Of course our new file server / print VM-to-be, I'm going to install the client, I think.

  Where can I find a good tutorial on setting up a 'firewall VM?

  I need to know/learn how to configure the vSwitch, etc. as well.

  I'll need to use a reasonably good "freeware" version because the virtual machines are all already behind a physical firewall, it would simply be an additional protection.

  I saw a comment somewhere that could use pfSense, for example...

  We have vShield Zones, which would be worth learning and help?

  In addition, I should find and review of vSphere hardening once that I find documentation on this subject...

  Thank you, Tom

  Hello

  I read that it is possible for Symantec EndPoint Protection to perform analysis of disk offline with the vSphere vStorage API.

  Symantec already has a product that makes scans disk offline such as trend and McAfee, do not know how Symantec Endpoint that currently integrates.

  Where can I find documentation and instructions on this subject?

  Try the Symantec Web site.

  Where can I find a good tutorial on setting up a 'firewall VM?

  It depends on the firewall that you want to use one, so that we can better direct you. There's vShield Edge, vShield App, Altor VF3, Catbird vSecurity networks, reflex vTrust, vShield Zones, Smoothwall, m0n0wall, IPcop, vyatta, Checkpoint, etc, etc. If you encounter any problems, choose one, you will need to give us your vFW needs...

  I need to know/learn how to configure the vSwitch, etc. as well.

  In general nothing a lot get to the vSwitch, but it depends on which tool you use and mode that is, once more, must know the tool that you want to use.

  I'll need to use a reasonably good "freeware" version because the virtual machines are all already behind a physical firewall, it would simply be an additional protection.

  I saw a comment somewhere that could use pfSense, for example...

  Looking at Smoothwall, IPcop, m0n0wall, pfSense, etc.. Here are several firewalls dashboard style.

  We have vShield Zones, which would be worth learning and help?

  Depends on your needs, in fact. vShield Zones is a firewall from area to area that resembles what you need, then yes it will work.

  In addition, I should find and review of vSphere hardening once that I find documentation on this subject...

  See http://www.virtualizationpractice.com/blog/?page_id=4931 for the list of virtualization security resources.

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, 2010

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

• Sansa Clip freezes at startup and on the firmware update

  After unplugging my video to my computer, it is hung on the screen "Connected".

  I forced a reset by pressing the power switch it 10 seconds

  He then restarted and hung on the Sansa screen

  I followed the instructions given in these forums in order to download the update of the firmware, mount the Clip in MSC mode and install the firmware.  Unplug the Clip, it hangs at "Update Firmware in progress" screen.

  I then re-mounted the Clip in MSC mode and deleted all the files of music and the update of the firmware.  After disconnection, he hooked again on the Sansa screen.  I then mounted in MSC mode and re-installed the update of the firmware.  He is now suspended again at the screen to update the firmware.

  Any suggestions would be greatly appreciated!

  The following procedure restored the Clip, but requires access to a Windows operating system:

  1. Tower Mounting Clip in MSC mode off camera (now switch is in position 10 sec If necessary 'on'). Set the switch to position 'Hold '. While pressing the "Select" Center, plug it into the USB port on a Windows computer. Wait for Windows to recognize the device before you release the "Select" button

  2. format of the Clip Double click on 'My Computer' to open a window of the Explorer. You should now see the video listed as a reader. Right click on the video player icon and select "Format". Select "FAT32". Do not check the box "quick format". Format the drive.

  3. Finish you can now disconnect the Clip of the computer and it should behave as a Clip of the new out-of-the-box. If you wish, you can download Sansa Updater software from the web site of Sansa (Sansa > support > Clip > downloadsansa Firmware Updater) and run it to install the latest version of the firmware on your device.

• Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

  Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.

  Original title: code 10

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Toshiba 39L4363D: screen blinks after 7.1.90.22.01.1 firmware update

  Hi all

  yesterday, I had the latest firmware update and after that, my TV it is unusable, the screen flashes (since the start) I already did a factory reset but still flickering, it is present.

  Is anyone else having the same experience?

  Can I did a restore of the firmware?

  Thanks in advance

  See you soon
  Rexmida

  Hello

  From my own experience it is not possible to restore the firmware.
  But what exactly do you mean by the flicker of screen?
  This seems common television channels or maybe watch a Blu - ray DVD discs?

  Feedback would be appreciated.

• Portege Z30A - firmware update available for PM851 SSD?

  Someone (else) have a SSD PM851 in their Toshiba Z30A? (Windows 'Device Manager' will show only).

  It has come to my attention that these drives have a serious flaw in their firmware that affect performance.
  Google search for 'firmware 840 EVO performance' to find the patches for the commercial version of the Samsung.

  Y at - it for the PM851 SSD firmware update?

  My Toshiba Z30A delivered with such an SSD.

  I've updated my machine with 840 EVO and I ve installed S... Software Wizard so I was informed about the latest firmware update and I ve installed.
  I ve checked manufacturer s page to support SSDS but I didn t find anything for PM851 SSD so I think that the firmware update is currently not available.

• Seagate Hard Drive Firmware Update for the drive model: ST1000LM024

  I have (HP Pavilion dv6-7180se Entertainment Notebook PC). All the drivers for this model installed correctly except the drivers Frimware (Seagate hard drive Firmware Update) and (PLDS Optical Drive Firmware Update). the first one says "this hard drive model is not supported. Model = ST1000LM024"but my hard drive came from the factory, so what is the practice solution to install this driver? images .view of problems:

  This is to seagate:

  and for PLDS:

  Need help. Thank you.

  What mean of these messages, is that these "Firmware updates" do not apply to material in your specific computer. The two "Seagate Firmware Updates" are respectively for the hard drives of 250 GB / 320 GB and 500/750 GB hard drives. Your computer comes with a 1 TB hard drive, which is not subject to updates of the firmware. The "PLDS Optical Drive Update" is for another drive to CD/DVD only installed in your computer and also does not apply. There is no further action to take... Do not attempt to install these updates of firmware, because they do not apply to the hardware in your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Firmware Updater problems :(

  I just download the Sansa firmware update, and when I go to run it, an error message appears saying "the Installation failed. Please try again later. "I started again and received the same error message. Then I waited about 30 min. and sure enough, same error message. What I'm doing wrong!

  OK, the fact is that 90% of us who have been here very long you will simply ignore the update. On the "rocket", go to settings > system settings > Info and watch the number of Firmware if it starts V01 access the Thread called Fuze Firmware Updater, in the first post to find the update of the firmware that starts V01 and then follow the instructions on this post. If your Firmware number starts V02 find this firmware and follow the instructions.