Unable to connect on the computer of Windows 8

Similar Questions

• "Unable to connect to the computer printer" message appears during installation of laserjet p1102w.

  During the installation of the wireless software for Laserjet P1102W on computer with XP Professional (pk2), the message ' printer was able to connect to the wireless network.  However, this computer is unable to connect to the printer. "I checked the printer and the computer both connected to the same network named with even WEP key, opening, credentials etc.  I have a linksys connected to the computer and the modem cable. When I connect using the USB connect wire to the computer directly, I can print.   Two software, wired and wireless, have been loaded.  My HP inkjet printer is wired to the linksys and works for multiple computers to the wireless network. Do I need to have another printer? I thought that I could still have a truly printer wireless!  I'm a novice at this.  Thanks for any help you can give.

  I called HP support.  The technology was very knowledgeable and accommodating.  HP Smart Install program (in the printer and on CD) that came in the box was an old version.  I had to reset the printer back to factory default and to download the new firmware on the HP.com website.

  The oldest had an incorrect address router (network). You can see the address of the router (IP) when you perform the self-test (hold down the button "on") under the information network.  IPv4 address must be the same as your router.  Now my printer and computer are looking at the same network.

  Works great!  Love this LaserJet.  Faster than my last HP LaserJet 4 L.

• Unable to connect to the Internet on Windows 8

  Original title: Windows 8

  I receive the message that Microsoft cannot connect to the internet and that I should check my connection, DO NOT CALCULATE!

  Hi Kenneth,

  Thanks for posting your question in the Microsoft Community forums.

  I'm sorry to know that you are unable to connect to the Internet. Let me try and help you with the issue that you are facing.

  1. What is the brand and model of the PC?

  2. do you let us know the exact error message that you receive? This is important in order to solve the issue accordingly.

  3. are you connected wired or wireless network?

  Internet connection issues are more often caused by cables disconnected or routers and modems that do not work correctly.

  Follow the steps in troubleshooting this article and check if this helps solve the problem.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet

   

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Unable to connect to the computer using wifi

  A got a new Sony HX30V and tried to use the feature "send to the computer. He is able to connect to the wi - fi home and also able to detect the name of the computer to which it is supposed to transfer the photos to. However, during the process to actually connect to the computer, it throws a "network error" after trying for about 30 seconds. I have Windows 8 running on my system. Any ideas how to solve this?

  After spending hours and hours with exactly the same problem, I found the solution. I tried with 2 computers with different OS, 2 different networks, and I read a lot of posts...

  The problem behind it is that you could not transfer images using WIFI while your computer is also connected via WIFI.  Then:

  (1) connect your computer using the connection of the cable to the access point.

  (2) connect the camera via USB to your computer and make sure that the PlayMemories software detects the camera.

  (3) then, unplug the unit and send images to the computer using WIFI.

  If this does not work because the shipment never ends, and then review:

  (1) the battery should not be weak, or if she is then connect the camera to the power supply.

  (2) the distance from the camera to the access point must be short (maximum of 3 meters), otherwise it is too slow.

• Unable to connect to the store of Windows 8, failing WWAHost.exe?

  Hi all

  For some reason I can't connect to the store of Windows 8. When I run the app I get the familiar green background, but it blocks just on hold.

  I checked my log files and it looks like the app WWAHost.exe is a failure. I don't know exactly what this process is for, but I searched him and discovered that he has something to do with the store of Windows 8. I have also a log indicating that the winstore_1.0.0.0_neutral_neutral_cw5n1h2txyewy package has ended. I suspect that this is also related to the store of Windows 8.

  Any help or suggestion would be greatly appreciated!

  Thank you!

  T

  Here are my logs from the event:

  [Application Hang error]
  The WWAHost.exe version 6.2.9200.16420 program ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the control panel of the center of the Action.
  Process ID: 8 d 0
  Start time: 01cdc5f14a8f5537
  Time of termination: 4294967295
  Application path: C:\Windows\System32\WWAHost.exe
  Report ID: 9ae01907-31e4-11e2-be76-6cf049edba2a
  Failed package name: winstore_1.0.0.0_neutral_neutral_cw5n1h2txyewy
  Flaws in the application related to a package ID: Windows.Store

  -

   

    1002

    2

    101

    0 x 80000000000000

   

    5435

    Application

    MeeshPC

   

   

  -

    WWAHost.exe

    6.2.9200.16420

    8 d 0

    01cdc5f14a8f5537

    4294967295

    C:\Windows\System32\WWAHost.exe

    9ae01907-31e4-11E2-be76-6cf049edba2a

    winstore_1.0.0.0_neutral_neutral_cw5n1h2txyewy

    Windows.Store

    55006E006B006E006F0077006E0000000000

   

   

  [Apps, error]
  Package winstore_1.0.0.0_neutral_neutral_cw5n1h2txyewy was fired because he took too long to suspend.

  -

  -

   

    2484

    0

    2

    2400

    0

    0 x 2000000000000042

   

    5436

   

   

    Application

    MeeshPC

   

   

  -

    winstore_1.0.0.0_neutral_neutral_cw5n1h2txyewy

   

   

  Hi John (?),.

  I have not set up a batch file or a tool for this procedure. This is something that would help, after we have gathered evidence as to the cause and the effect. Could follow you this sequence below and send the results? The commands to type are in bold.

  Thank you

  Paul

  PS: Here's how do for copy/paste from one window command prompt, if you do not know how: http://unlockforus.blogspot.com/2009/06/how-to-copy-paste-text-from-cmd-or.html

  1. on the start menu, type cmd.exe. You will see "Command Prompt" in the list of results. Right click on it. A context menu bar will appear at the bottom of the screen. Click on "Run as Administrator". Click 'Yes' to the user account control prompt. Shell will begin.

  2 see your LOCALAPPDATA setting. Type of...

  C:\ >define LOCALAPPDATA
  LOCALAPPDATA = C:\Users\Paul\AppData\Local

  3. we will see the contents of the WinStore_cw5n1h2txyewy folder. Type of...

  C:\ >dir '% LOCALAPPDATA%\Packages\WinStore_cw5n1h2txyewy'
  Volume in drive C is system
  Volume serial number is CE28-C1D0

  Directory of C:\Users\Paul\AppData\Local\Packages\WinStore_cw5n1h2txyewy

  18/03/2013 23:24

  .
  18/03/2013 23:24 ...
  18/03/2013 23:25 AC
  18/03/2013 23:24 settings

  4. do you have the AC file? If type is not...

  C:\ >md "% LOCALAPPDATA%\Packages\WinStore_cw5n1h2txyewy\AC\PRICache"

  5. now check the ACES (Access Control Entries) in the ACL (Access Control List) for HQ file. Type of...

  C:\ >icacls "% LOCALAPPDATA%\Packages\WinStore_cw5n1h2txyewy\AC".
  C:\Users\Paul\AppData\Local\Packages\WinStore_cw5n1h2txyewy\AC S-1-15-2-2608634532-1453884237-1118350049-1925931850-670756941-1603938316-3764965493:(OI)(CI)(F)
  NT AUTHORITY\SYSTEM: (I) (OI) (CI) (F)
  BUILTIN\Administrators: (I) (OI) (ci) (F)
  PAULBROHOME\Paul: (I) (OI) (ci) (F)
  Mandatory Label\Low mandatory Level: (OI) (CI) (NW)
  Processed 1 files successfully; Treatment failure 0 files

  6. do you not see the S-1-15-2... and ACEs 'Mandatory Label\Low mandatory level' in the list? Otherwise, type...

  C:\ >icacls "% LOCALAPPDATA%\Packages\WinStore_cw5n1h2txyewy\AC" / grant * S-1-15-2-2608634532-1453884237-1118350049-1925931850-670756941-1603938316-3764965493:(OI)(CI)(F) /setintegritylevel (OI) (CI) L
  processed file: C:\Users\Paul\AppData\Local\Packages\WinStore_cw5n1h2txyewy\AC\
  Processed 1 files successfully; Treatment failure 0 files

  6. try to launch the app Store

• Unable to connect to the updates of Windows

  I am unable to connect to Windows update.  I use VISTA and receive the following error message:

  • Updated Windows cannot currently check the updates because the service is not running.  You may have to restart your computer.

  I rebooted several times without success.  Also, I update is enabled, so I'm at a loss to know what to do.

  Your output indicates a problem with the BITS service.

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit and menu file - import and bits_vista_32.reg of importation.

   

  https://SkyDrive.live.com/redir?RESID=E2F0CE17A268A4FA! 171

   
  It should work on 64 or 32-bit vista.

  Reset.

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  SC config BITS start = demand
  SC start BITS
   
   

• Unable to connect to the computer because the password is not be accepted.

  Hello

  So yesterday, I decided to put a password on my pc (Windows 7 Home Premium 64-bit), but when I turned on my pc today, he immediately said that I have to enter a user name and a password first.

  But I did have the chance to fill in anything but it was weird.

  Anyway, I pressed OK and it sent me to the login screen.

  All of a sudden there is 2 users, instead of one, but none of them was my account.

  They both had no name or avatar so they were square just empty, and they're all two protected by Word.

  My password does not work on both accounts, so I can not connect. I tried to get with Safe Mode, but even then he asked me a password!

  I have a few projects out there that need to be finished and send it within 2 weeks so I really need these files.

  I don't mind if I have to format my whole hard drive, but is it possible to go beyond the login screen?

  Or just a way at least to get some files?

  All advice is appreciated!

  -Martin

  Hello

  If you put a password on it, it is normal that next time you start it will ask for this password.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  To use system restore to log on Windows 7 or Windows Vista when you lose access to an account, follow these steps.

  Note To do this, there must be a restore point from the system in which the connection was successful.

  1. Insert the Windows Vista or Windows 7 DVD, and restart the computer.
  2. When you receive the following message appears, press a key:
     Press any key to start from the CD or DVD.
  3. Set the following preferences and then click Next:
     • To install language
     • Time and currency formats
     • Keyboard or input method
  4. Click repair your computerand select the operating system you want to repair, and then click Next.
  5. Click System Restore, and then click Next.
  6. Click on the food that you want to use, and then click Next.

     Note Click a restore point that will return the computer to a State where the connection is successful. After you use the system restore feature, reinstall all programs or updates that can be removed. You won't lose any personal documents. However, you may have to reinstall programs. You may also need to reset some personal settings.

  7. Confirm the disks that you want to restore, and then click Next.
  8. Click Finish, and then click Yes when you are prompted.
  9. When the system restore process is complete, click restart to restart the computer.
  10. Once the computer restarts, click close to confirm that the system restore process has finished successfully.
  11. Use an appropriate method to open a session. For example, log in using an older password, or log in using another computer account.
  12. etc.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  _______________________________________________________

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

  http://Knoppix.NET/

  _______________________________________________________

  To reinstall the operating system:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  See you soon.

• Unable to connect to the games for windows live to activate dead rising 2

  Games for Windows Live, Activation of the Production and Dead Rising 2

  Hello

  I have a problem with the activation of a product through Games for Windows Live. It is that my computer is unable to connect to Games for Windows Live via the internet even if my computer is connected to the internet. The product needs to connect to Games for Windows Live for him were allowed to be used. A username of Games for Windows Live and the password is not necessary according to the product. The first obvious solution was to turn off my firewall, restarted and the connection attempt. Unfortunately, she didn't and I don't no how to best continue. I contacted customer support and has been achieved here.
  If possible could you please give me some advice on how to connect?
  Thank you.
  Mark

  Hi Mark,

  ·         You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to follow the steps in the article in the Microsoft Knowledge Base and check if the problem still persists.

  Games for Windows LIVE: solving problems

  http://support.Microsoft.com/kb/977709

   

  Method 2: If the method above does not help, then you can read the following article and check.

  Games for Windows LIVE: you can not connect to LIVE and you receive an error message

  http://support.Microsoft.com/kb/938705

  You can also view the article mentioned for more information below:

  Games for Windows - LIVE: how to create a LIVE account

  http://support.Microsoft.com/kb/937066

  Let us know if that helps.

• Unable to connect to the Internet error "Windows does not detect a network card installed properly"

  Internet does not connect and connection was well 5 hours ago. Message states: "Windows did not detect a network card installed properly" How should I proceed? Connection is on the laptop, but also other devices. Problem is only with the office.

  Any help is appreciated

  OT: Internet connection

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Unable to connect to the computer with the normal password

  Suddenly, my computer won't let me by using my password to just disconnect stop any help welcome

  accepted gratefully thanks in advance
  Mary
  * original title - my computer has suddenly stopped to let me access it using my paswword it will disconnect just not stop any help please *.

  Hello

  Your question does contain all the required information necessary for us to help you. Please provide us with the following information.

  1. What's happened before the problem started?

  2. did you of recent changes on the computer?

  3 - is the computer disconnect after entering the password?

  I suggest you follow the methods below to solve the problem:

  Method 1: Try to start the computer in safe mode. Check out the link referred to below:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode 

   

  If you are able to connect continue with the clean boot. Check out the link referred to below:

  http://support.Microsoft.com/kb/929135

  Note: when the installation is complete, please put the computer in a normal state by following step 7.

  Method 2: You can also try the last known good configuration. Check out the link referred to below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

   

  Method 3: Perform a restore of the system from the recovery options. Please visit the link mentioned below to:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  I hope this helps.

• Remote Desktop connection: Windows 7 Home Premium 64-bit connects to the computer of Windows XP VPN

  Hi all

  I am trying to establish remote desktop TO my new laptop (Windows 7 Home Premium 64-bit) on my computer (Windows XP) work via a VPN. The VPN Client connects to my network to work with no problems, but when I try to use the remote desktop connection I get an error message:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  Items 1-3 are working well, so I guess that the problem is caused by another issue?
  I'd appreciate any help.
  Thank you
  Lou

  Thanks for your response Al. To answer your qus:

  (1) cisco VPN Client for 64 - bit.

  (2) I don't know how to ping through the VPN tunnel - I don't see this option, anywhere in the Cisco customer (I'm not a professional, just a user)

  (3) Yes. Also, I can connect to the host PC via my old laptop XP (xp) of fine House, just not my new laptop (Windows 7 Home Premium) so the problem must be with my new laptop rather than at the end of the host PC.

  After that you connect through the VPN tunnel open a command window, IE. go in Start > run , then type cmdand type ping DRC-hostname or IP-address-DRC ping.

  Examples:

  Ping lou - pc

  ping 192.168.1.25

  FWIW, I have a desktop computer home wireless Windows 7 Home Premium SP1 64 bit on my LAN that connects fine to a XP Pro SP3 32-bit Wired test machine using [DRC] remote desktop. Now XP Pro SP3 DRC test machine is configured for a static IP address and I have manually configured the network mask, gateway, DNS resolves and made sure that NetBIOS over TCP/IP is enabled in the properties of the NETWORK Ethernet card on the test computer.

  Just for fun, I checked the hashes of file for the file mstsc.exe on the Win 7 Home Premium 64-bit machine and a machine Win 7 Home Premium 32 bit I have and hashes were a bit different as the size of the files. The versions of the files are the same though. I assume that the difference is because we're 64-bit to 32...

• Unable to connect to the router with windows 7?

  I have just bought an Acer Revo R3700 and installed Windows 7 above, but I can't connect to my router.

  My router is heaven and successfully has 4 laptops (both under Vista, two 7 running), an Xbox and a Wii and two smartphones connected to him. Yet I just can't do this system to connect to him.

  I'm at my wits end... I've tried absolutely everything. I searched the Microsoft answers site found several similar problems and tried a lot of solutions, including adding files in the registry and update drivers.

  At first I could connect to the internet every now and then, but it was biblically slow (I tried to download Google Chrome and got him to 0.2 Kbps) and soon disconnected. Now I can't connect at all.

  I just downloaded a the Ethernet controller driver and updated a driver WLAN as they apparently do not come with Windows, but it still doesn't work. Although the message has now changed to "Unable to connect" to "Limited connectivity" (even though I think it's more coincidence than anything else)

  It should not be a question of signal strength, like the Xbox and laptop computers work fine when placed next to her.

  Really needed a solution to what running an ethernet cable is not really an option :(

  Thanks in advance guys. I'll be happy to provide any additional details if you need it :-)

  EDIT: / / I would add that I seem to be able to connect fine with a phone as a hotspot? It is very very weird.

  EDIT: / / I just managed to connect, but its very slow and not changed anything for the last 100 times? Everything seems to be completely random when it let me? : S

  Hardware support comes equipment - including the drivers/software manufacturers to use such software in all operating systems.

  Looks like a possibly faulty hardware or shotty (the wireless network device.  Make and model)?

• Unable to connect to the wireless network, Windows error cannot communicate with the device or the reaource (primary DNS server)

  Original title: internet connection problem

  Hey,.

  I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:

  1. Windows cannot communicate with the device or the reaource (primary DNS server)

  2. the connection between the Internet and your access point, router or cable modem is broken

  3 problem with access point or wireless adapter

  I think it's an effects of virus or something?  Because yesterday it works really well. How can I fix? Thank you very much

  Hello Hildegard Lydia,

  You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.

  What is the brand and model of your computer?

  Please follow the steps mentioned below:

  Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
  I suggest you try to reset the TCP/IP stack.
  http://support.Microsoft.com/kb/299357

  Method 2:

  I suggest that you refer to the following link:

  Why can't I find a wireless network?

  http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7

  Method 3:

  See the steps in the following link and check:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please an update on the status of the issue to help you further.

• Printer HP Photosmart 5520: Unable to connect to the computer

  I recently set up my HP Photosmart 5520, including with web connected HP services. My laptop immediately after the passage of the printer, I am able to print correctly. However, after some time, the connection between the printer and the laptop is lost and when I try to print, I get an error message:

  However, if I send a mail with an attachment to the printer the printer still prints the document. This suggests that it is connected to the internet, but anyway not via WiFi for my laptop. Any suggestions would be welcome.

  Hey @mb218,

  Thanks for posting in the Forum from HP Support.

  I understand that you are experiencing connectivity problems when you use your HP Photosmart e-all-in-one 5520, printer in combination with your Windows laptop.  I want to help you with this.

  The first thing I recommend you try running HP and Scan Doctor for Windows printing.  Click here to install.  Ideally, this utility automatically detect and correct problems with the configuration of your software.

  If this basic approach is short, I recommend that you click here to access a HP article that provides more details and more intense network troubleshooting steps.  In particular, you may find that Solutions 2 and 3 are useful for strengthening your wireless connection.

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below.

  Thanks again for your post and have a great day!

• HP Officejet Pro 6830: HP Officejet Pro 6830 - unable to connect to the computer

  Hello

  I just replaced my Officejet6500 with an Offiejet 6830

  I have lived throughout the configuration stage until the software looked for the printer and it cannot be found. the printer is confirmed as connected to the same network as the computer's wireless so I don't know why it is not to be discovered

  Any help would be appreciated

  Thank you very much

  Mike

  Hey @mfbar,

  Welcome to the Forums of HP Support!

  I understand that printer e-all-in-one Officejet 6830 and your Mac OS x 10.10 machine are not communicating. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  Turn the printer off.

  While the printer is turned off, remove the power cord at the back of the router for a minute.

  When the lights come back on the router, turn on the printer.

  Now on the printer, click on the wireless icon that looks like a radio tower.

  • If the IP address starts with 169.254, the printer is not getting a valid IP address. Contact your internet provider or one that provided you with the router for assistance in ensuring the router assigns IP addresses.
  • If the IP address starts with 172, the printer is connected to a network of comments. Contact your internet provider or one that provided you with the router for assistance with deactivation of the feedback network.
  • If the IP address begins with 192.168, the printer is properly connected to the network. Please see below.
  • If the IP address begins with any other number, the network is maintained. Contact your computer or the one who manages the assistance network.

  Once the above is done, if the Mac is still not able to detect the printer then the next step is to contact your internet provider or the one who provided the router. When you do, ask them to:

  • Open all ports.
  • Select multicast.
  • Disable MAC filtering/MAC cloning.
  • Make sure that the router has a band of 2.4 GHz (gigahertz).

  Please let me know the results after following the above. If you are able to connect to your printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.