Unable to connect to localhost

Similar Questions

• Unable to connect to localhost - web sharing does not?

  I recently upgraded from the Mavericks to El Capitan. Before the upgrade, I could go to localhost/folder/file to test php files that I had in Library/WebServer/Documents/but since the upgrade I just get "Unable to connect" message in my browser.

  The first thing I checked was in system preferences > sharing Web. It was not so I have tried to market. When I do the cursor moves on IT and the words say "web sharing is on", but the dots are red. If I close the web sharing control panel and reopen it is OFF.

  The second thing that I tried was running on apache in the Terminal, but he says that it is already running.

  Then I tried this trick and got the following error:

  apachectl configtest

  AH00526: Error on line 20 of /private/etc/apache2/extra/httpd-mpm.conf syntax:

  Command not valid 'LockFile', perhaps misspelled or defined by a module not included in the server configuration

  Have tried Googling this syntax error and tried a few solutions, but just make more and more confused now. Maybe someone out there better than I understand what is happening? Thank you very much in advance.

  What is in your file httpd - mpm.conf around line 20.

  I have no reference to "LockFile" anywhere in the config file, so looks like there's something wrong with the file.

• installing Oracle, unable to connect to localhost:5500 / em

  Hi guys,.
  
  I just installed oracle 10g on linux enterprise but cannot connect to the Manager.
  I open firefox, type in the http:/localhost:5500/em, but firefox tells me that it cannot connect.
  I have to start the service or something?
  
  Thank you

  (1) the installation of almost all Oracle products in the variants of Linux or Unix will fail usually tempted by the root. (IOW - do not use Root)

  (2) any person who uses the root on a regular basis in Linux long-term demand questions. Root is the system maintenance - use required wehen and out. It is not an aphrodesiac for users.

  (3) If you have unzipped the installation CD, you can check the permissions of the runInstaller. (ls - l)

• Unable to connect to Essbase on Regional service Console server because of error 1042006

  Hello
  
  I installed the whole EPM 11.1.1.3 on Windows x 64 platform. When I try to connect the server essbase through the Regional service console, I get the following error:
  
  Essbase Server: localhost com.essbase.eas.essbase.defs.ServerCommands.Connect December 28, 2010 17:39:08 IST
  Error: 1042006: error network [10061]: unable to connect to [localhost:1423].
  The customer has expired waiting to connect to Essbase Agent using the TCP/IP protocol.
  Check your network connections.
  Also, make sure that the values for server and port are correct
  
  I checked the CFG file, which shows the correct port as well. I can connect to the Administration of Essbase server located on the same machine, but do not know why I get this error message. Below I have pasted the contents of the CFG file, in case where someone wants to cross check it out.
  
  
  CFG File indicates the following:
  
  ; The following entry specifies the full path to the JVM. DLL
  ; JvmModuleLocation D:\Hyperion\common\JRE\Sun\1.5.0\bin\client\jvm.dll
  BPM_Oracle_DriverDescriptor "MERANT 5.2 OEM 32-BIT Oracle Wire Protocol.
  BPM_DB2_DriverDescriptor "MERANT DB2 Wire Protocol BITS 32 5.2 OEM"
  BPM_SQLServer_DriverDescriptor "MERANT 5.2 OEM 32-BIT SQL Server Wire Protocol.
  BPM_SQLServer_DriverDescriptor "SQL Server."
  ; BPM_Netezza_DriverDescriptor "NetezzaSQL".
  BPM_Teradata_DriverDescriptor "Teradata.
  BPM_ORACLEBI_DriverDescriptor 'Oracle BI Server'
  ; AuthenticationModule CSS
  ; AGENTPORT 1423
  ; SERVERPORTBEGIN 32768
  ; SERVERPORTEND 33768
  ; AGENTDESC hypservice_1
  AGENTPORT 1424
  SERVERPORTBEGIN 32768
  SERVERPORTEND 33768
  AGENTDESC hypservice_1
  
  
  Ideas that would be really useful.
  
  Thank you
  AJ

  There is a clue in the error message and the CFG file you posted.

  The error message:
  ...
  Unable to connect to [localhost:1423].
  ...

  CFG file indicates:

  ...
  ; AGENTPORT 1423
  ...
  AGENTPORT 1424
  ...

  The port default (1423) is commented out and changed in 1424. Your EAS connection must use port 1424 and not default to 1423.

  Try to use "localhost:1424" (without the quotes) in the Essbase server field when you add the Essbase server to EAS.

  Published by: Robert Armstrong on December 29, 2010 13:25 - typo

• ' Could not connect: unable to connect to the host localhost: connection refused "on variuos orders

  On ESX 4.0.0 Update 1.

  When I run a command like "vim-cmd/hostsvc/hostsummary | "grep inMaintenanceMode" or vimsh - n - e/hostsvc/maintenance_mode_enter ' / 'vimsh - n - e
  "/ hostsvc/maintenance_mode_exit" all returned the same error message ' could not connect: unable to connect to the host localhost: connection refused.

  I checked the checked the file /etc/resolv.conf Bed & Breakfast.

  I am able to ssh on the server as well as the use of WinSCP without any problem.

  I can connect with the VI Client also without problem.

  Any ideas?

  The problem has been resolved.

  The fix:

  =====

  # vimsh-e - n/hostsvc/hostsummary | grep inMaintenanceMode

  Using the libcrypto, version 90809F

  inMaintenanceMode = false,

  # vim-cmd/hostsvc/hostsummary | grep inMaintenanceMode

  inMaintenanceMode = false,

  Rationality for the problem is these commands (vim - FCM or vimsh) were unable to communicate due to lack of xinetd process.

  # ps - ef | grep-i xinet

  root 11527 25978 0 04:30 pts/0 00:00:00 grep-i xinet

  # service xinetd restart

  #

  # Service xinetd status

  #

  # service xinetd start

  # Service xinetd status

  # /etc/init.d/xinetd ls

  /etc/init.d/xinetd

  / * But NETWORK seems to be normal on the server * /.

  # cat /etc/resolv.conf

  nameserver 172.26.6.21

  nameserver 172.25.6.51

  # ifconfig

  Lo encap:Local Loopback link

  INET addr:127.0.0.1 mask: 255.0.0.0

  RACE of LOOPING 16436 Metric: 1

  Dropped packets: 6053620 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 6053620 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:0

  RX bytes: 2021352939 (1.8 GiB) TX bytes: 2021352939 (1.8 GiB)

  ppp0 link encap:Point - to-Point Protocol

  INET-addr:164.152.87.72 P - t - P:164.152.87.64 mask: 255.255.255.255

  Up POINTOPOINT RUNNING NOARP MULTICAST metric MTU:1500: 1

  Fall of RX packets: 208 errors: 2:0 overruns: 0 frame: 0

  Dropped packets TX: 205 errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:3

  RX bytes: 18165 (17.7 KiB) TX bytes: 22314 (21.7 KiB)

  vmnic100200 Link encap HWaddr 00: 1B: 21:6 A: C9:C4

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 1383869 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 1382815 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 90351869 (86.1 MiB) TX bytes: 92106912 (87.8 MiB)

  Interruption: 97

  vmnic100201 Link encap HWaddr 00: 1B: 21:6 A: C9:C5

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 24239456 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 23905751 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 2078777971 (1.9 GiB) TX bytes: 2226266024 (2.0 GiB)

  Interruption: 113

  vmnic100600 Link encap HWaddr 00:25:5 C: 2: 75:30

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 13076343 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 5226061 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 1292112365 (1.2 GiB) TX bytes: 1224021381 (1.1 GiB)

  Interruption: 129

  vmnic100601 Link encap HWaddr 00:25:5 C: 2: 75:31

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 819469 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 770101 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 56287946 (53.6 MiB) TX bytes: 52499576 (50.0 MiB)

  Interruption: 137

  vmnic110200 Link encap HWaddr 00: 1B: 21:6 A: CA:44

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 1774795 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 1681079 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 142435399 (135.8 MiB) TX bytes: 135079293 (128.8 MiB)

  Interruption: 145

  vmnic110201 Link encap HWaddr 00: 1B: 21:6 A: CA:45

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 21079616 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 20688606 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 1859632344 (1.7 GiB) TX bytes: 1852761835 (1.7 GiB)

  Interruption: 161

  vmnic110600 Link encap HWaddr 00:25:5 C: 2: 75:32

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 39205375 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 21339531 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 32420064542 (30.1 GiB) TX bytes: 3709579479 (3.4 GiB)

  Interruption: 177

  vmnic110601 Link encap HWaddr 00:25:5 C: 2: 75:33

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 2922150 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 2110634 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 398811808 (380.3 MiB) TX bytes: 245899848 (234.5 MiB)

  Interruption: 185

  vswif0 Link encap HWaddr 00:50:56:41:76:EB

  INET addr:172.26.6.13 Bcast:172.26.6.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 109779 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 23715 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 10137604 (9,6 MiB) TX bytes: 21716347 (20.7 MiB)

  vswif1 Link encap HWaddr 00:50:56:40:30:F7

  INET addr:172.26.7.11 Bcast:172.26.7.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 36515 errors: 0:0 overruns: 0 frame: 0

  Dropped TX packets: 4 errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 3702390 (3,5 Mio) TX bytes: 168 (168,0 b)

  vswif2 Link encap HWaddr 00:50:56:4 A: DF:1 B

  INET addr:172.26.8.11 Bcast:172.26.8.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 20525 errors: 0:0 overruns: 0 frame: 0

  Dropped packets TX: 6 errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 2742990 (2.6 MiB) TX bytes: 252 (252.0 b)

  vswif3 Link encap HWaddr 00:50:56:4E:1E:24

  INET addr:172.26.9.12 Bcast:172.26.9.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 26408 errors: 0:0 overruns: 0 frame: 0

  Dropped TX packets: 4 errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 3095970 (2.9 MiB) TX bytes: 168 (168,0 b)

  # / opt/ft/bin/ftsmaint lsVnd

  Virtual network device (VND) groups

  ===================================

  Status of group name

  --------------------------

  vSwitch0 ONLINE

  vSwitch1 ONLINE

  vSwitch2 ONLINE

  vSwitch3 ONLINE

  Members of the Group of VND

  =================

  Link Group Name status Interface link state speed

  --------------------------------------------------------------------------

  vmnic100200 vSwitch2 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic100201 vSwitch3 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic100600 vSwitch0 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic100601 vSwitch1 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic110200 vSwitch2 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic110201 vSwitch3 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic110600 vSwitch0 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic110601 vSwitch1 DUPLEX UP LINK

  1000 mb/s-FD

  / * Further consideration on the problem of starting XINETD * /.

  Further examination shows that the xinetd is unable to start because he believed NETWORK unavailable.

  Starting xinetd uses the contents of the sysconfig file where there was an entry incorrect "NETWORKINcesv = yes". We have corrected this entry and restarted xinetd process.

  After this correction, xinetd is restarted, the system seems to be normal.

  # cat sysconfig

  NETWORKINcesv = yes

  HOSTNAME = Server.test .net

  GATEWAY = 172.26.6.1

  IPV6_AUTOCONF = no

  NETWORKING_IPV6 = no

  #

  # cat sysconfig

  Networking = yes

  HOSTNAME = Server.test .net

  GATEWAY = 172.26.6.1

  IPV6_AUTOCONF = no

  NETWORKING_IPV6 = no

  # ps - ef | grep-i xinet

  root 27977 25978 0 04:41 pts/0 00:00:00 grep-i xinet

  # service xinetd start

  [From xinetd: OK]

  # ps - ef | grep-i xinet

  root 28119 1 0 04:41?        00:00:00 xinetd - stayalive - pidfile /var/run/xinetd.pid

  root 28239 25978 0 04:42 pts/0 00:00:00 grep-i xinet

  #

  # service xinetd restart

  [Judgment of xinetd: OK]

  [From xinetd: OK]

  # vim-cmd/hostsvc/hostsummary | grep inMaintenanceMode

  inMaintenanceMode = false,

  # vimsh-e - n/hostsvc/hostsummary | grep inMaintenanceMode

  Using the libcrypto, version 90809F

  inMaintenanceMode = false,

  #

• Muse forms error (error: mail(): unable to connect to the server e-mail "localhost" port 25, verify your "SMTP")

  HIE

  I get this error when downloading my site on Azure

  Can I use forms in azure or I have to embeed HTML so that

  ﷯2 warnings

  Web server returned an unexpected error in PHP. Contact your Web host or administrator of the Web site on the configuration of PHP and mail. Error: mail(): unable to connect to the server e-mail "localhost" port 25, verify your "SMTP" and "smtp_port" in php.ini or use ini_set()

  PHP mail can be disabled or misconfigured web server. These forms can not send email. Contact your Web host or administrator of the Web site on the correct configuration of PHP mail.

  Rockinghudson you cannot use FTP to upload your site on Business Catalyst. You must use post it on the function of catalyst for business within the Muse. The code generated for Business Catalyst is different from the code that is generated when you use file > Upload FTP host or file > export as HTML... from capacity and generic hosting needs are different from those for Business Catalyst.

• Unable to connect network [11001] error: could not find [localhost:2423]

  Hi all
  
  Unable to connect to Essbase Excel addin.
  
  When I click on sign in in the menu essbase.
  
  I fill the details such as the server name, user name, and password.
  
  It connects and dosent show applications or database.
  
  If I give the name of the server = servername:2423 (as a port not) I receive this error network error [11001]: cannot find [localhost:2423].
  
  I edited the host file also.
  
  I have two instance essbase. We're on the default port and another on no. 2423 port.
  
  Essbase server: 9.3.1
  
  Essbase client: 6.x
  
  Help, please.
  
  Kind regards
  Mink.

  AGENTPORT

  and NODENAME need your server name.

  Published by: RobertR3 on May 8, 2009 14:46

• Unable to connect to the software update server (127.0.0.1)

  I'm under El Capitan 10.14.4

  I'm unable to view or download from the App store apple updates. Everything else in the app store works fine except the updates and the updates, I get 3rd party updates, but nothing from apple. If I click on updates at the top of the app store icon I get the following error

  

  Troubleshooting steps I went through far

  • I restarted my mac a few times
  • I did some research on Google and messages more speak of iworm, fortunately I could find no trace of an infection by the worm, I scanned my machine using Sphos and ClamXav and haven't found anything relating to iWorm. I am also unable to find all the files, he leaves behind him, so I think I'm safe in this regard.
  • I checked the hosts file and there are no entries that should not be there, hosts file is copied below.

  # Database host

  #

  localhost # is used to configure the loopback interface

  # When the system boots.  Do not change this entry.

  ##

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  • The /var/log/install.log which appear relevant lines are;

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: Scan for pid 435 client (/ System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: out of time scan = 0.2

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: error in scan: error Domain = NSURLErrorDomain Code =-1004 'unable to connect to the software update server (127.0.0.1)." UserInfo = {NSErrorFailingURLKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, SUCatalogFetchOverrideURLString =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, NSLocalizedRecoverySuggestion = check that your network connection is working normally.} {If there is no problems with your connection, contact your network administrator for assistance., NSLocalizedDescription = can connect to the software update server (127.0.0.1)., SUErrorRelatedCode = SUErrorCodeScanCatalogNotFound, SUErrorUpdateServerName = 127.0.0.1, NSErrorFailingURLStringKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, _kCFStreamErrorDomainKey = 1, _kCFStreamErrorCodeKey = 61}

  May 26 09:44:02 macbook-pro softwareupdated [435]: Scan received the error unable to connect to the software update server (127.0.0.1).

  May 26 09:44:02 macbook-pro softwareupdated [435]: updates marked ramps

  • I can ping swscan.apple.com and she is resolved to 17.164.1.22 which is the same IP that also resolves the mac next to me (which gets the update)
  • I cannot telnet on port 443 to swscan.apple.com and it connects.
  • I have a mac in yosemite next to me who can see the updates so I suspect that doesn't pose any problems with the service itself rather something on why machine.
  • I started in safe mode, and while in safe mode, I get the same error.

  I am at a complete loss what to do next short of wiping and restore from a time machine backup, can anyone help please

  You can try to disable the Sophos websheild and ClamXav if she has one. Even better would be to uninstall both and test.

  FWIW, it is never a good idea to have 2 av programs installed.

• Unable to connect to remote PowerShell and get error message.

  I have two computer to Windows 7.

  Unable to connect to remote PowerShell and this error message

  nvoke-command - computername XXXXXX - scriptblock {}
  get-process} - administrator credentials
  [XXXXXXX] failed to connect to the remote server XXXXXX with the
  error message: WinRM client cannot process the request. If the
  authentication scheme is different from Kerberos, or if the client computer is
  not joined to a domain, then HTTPS transport must be used or the destination
  machine must be added to the TrustedHosts configuration. Use winrm.cmd
  to configure TrustedHosts. Note that computers in the TrustedHosts list might
  do not be authenticated. You can get more information about it by running the
  following command: winrm help config. For more information, see the
  about_Remote_Troubleshooting help topic.
  + CategoryInfo: OpenError: [XXXXXX], PSRemotingT
  ransportException
  + FullyQualifiedErrorId: ServerNotTrusted, PSSessionStateBroken
  PS C:\windows\system32 >

  PS C:\Users\Administrator > Invoke-Command - ComputerName XXXX - ScriptBlock {get-process} - administrator credentials
  [XXXXXX] failed to connect to the remote server XXXXX with the following
  error message: the client cannot connect to the specified destination in the
  request. Verify that the service on the destination is running and that he accepts the
  applications. Consult the logs and documentation for running management service
  on the destination, most IIS or WinRM. If the destination is the WinRM
  service, run the following command on the destination to analyze and configure the
  WinRM service: "winrm quickconfig". For more information, see the
  about_Remote_Troubleshooting help topic.
  + CategoryInfo: OpenError: (XXXXX:String)], PSRemotingTranspo
  rtException
  + FullyQualifiedErrorId: CannotConnect, PSSessionStateBroken

  # Outgoing connection is fine because I can connect to a different machine here. However incoming connection does not work

  # Tried several things like "Enable-PSRemoting - Force." and it starts Properperly

  # And since I put the machine in workgroup, as well run "Set-Item WSMan: \localhost\Client\TrustedHosts * ' (it is running successfully as well)

  # Infact WinRM QuickConfig will not work.

  # And tried with and without firewall. and also applied several patches, but has not solved the problem

  Please notify

  Original title: WinRM

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Unable to connect to the selected mobile data Simulator service

  First of all, let me say that I am a newbie with BlackBerry and simulators.

  I just downloaded 9630_Verizon and 9630_Sprint simulators as well as the MDS Simulator package. I start the MDS Simulator and the DOS window opens and seems to work very well. I start be 9630 simulators and while it seems to work, when I click on the button of the browser and try to go to any web page, I get:

  Unable to connect to the selected Mobile Data Service, please try again later.

  The version of the 9630 Simulator is 2.12.0.47

  The MDS Simulator version is ' SCM 4.1.4.19 19 2007/07/10»

  I can connect to the MDS Simulator using my browser of desktop connection to localhost: 8080. Statistics show all values of zero, so it seems that the 9630 is not yet connect to the Simulator. Is there a configuration file somewhere that I have to change to make it work?

  After that I posted this, I continued to search the forums of possible solutions. One recommendation, I found was to delete the files ".dmp" and restart the device Simulator. That did the trick, things work now.

• Unable to connect my Linux Machine database

  Dear all,

  Hope you will be fine.

  I'm having a problem to connect to PL / SQL Developer with my database available on the Oracle Linux virtual machine.

  I have a windows 7 installed on my PC, I have installed a virtual machine and install oracle 11g on this machine. I have a database named orcl on this and I am trying to connect to the database with my windows machine. I assigned ip appropriate to both computer and created under the setting mentioned in my tnsnames.ora file. But when I go to connect it shows error ORA-12203: TNS: unable to connect to the destination. Please guide me where I am doing wrong so I'll do it properly.

  ORCL_11G =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS =

  (COMMUNITY = tcp.world)

  (PROTOCOL = TCP)

  (Host = 192.168.0.100)

  (Port = 1521)

  )

  )

  (CONNECT_DATA = (SID = orcl)

  )

  )

  Kind regards

  Atif Zafar

  Thank you all for your help. I solved this problem by mentioning the HOST in listener.ora and tnsnames.ora files. In fact, I have to assign the static IP address of my Linux machine and unfortunately not to mention the IP address in my two files. It is show HOST = localhost this is why it is forbidden to connect with the other machine. Now I connected successfully and it works fine now.

  You mention linux machine IP here.

  ORCL =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS =

  (COMMUNITY = tcp.world)

  (PROTOCOL = TCP)

  (Host =192.168.0.100)

  (Port = 1521)

  )

  )

  (CONNECT_DATA = (SID = orcl)

  )

• ATG: Unable to connect to the ACC

  Unable to connect to the URL rmi://localhost:8860 / atg/devtools/UpdateAgent

  Couldn't make clear for module < app > URL http://LP-047DFGRDMDNS:10180 / dyn/admin/dynamoModuleResource /? moduleNMae = app & resourceURI = META-INF/MENIFEST. MF

  This is usually caused by a wrong setting of the property the/atg/devtools/UpdateAgent component of core adminPort.

  This property must be set to the HTTP port number for the Administration of the Dynamo server.

  I opened http://localhost:10180 / dyn/admin/kernel/atg/devtools/UpdateAgent /? propertyName = hostName and changed it to ComputerName localhost and it workes for now...

• Unable to connect to the network "\\localmachine\sharedname" share

  I use VMware vCenter Converter Standalone client, v5.0.0 build-470252, running on a 64-bit Windows 7 computer, try to import a Windows 2008 computer virtual (hosted by VMWare infrastructure) on my local machine.

  At the start of the converter, I have "connecting to a local server.

  Specification of the source system is OK, even if I don't know the certificate error.  The conversion wizard installs his agent and it connects OK.

  To the Destination System, I said:

  
  Type of destination: VMware Workstation or other virtual machines to VMware
  Product VMware: VMware Workstation 8.0.x
  Information on the virtual machine:
  Name: same as the source system, such as detected by the converter
  Location for the virtual machine: \\localmachine\sharedfoldername
  Username and password: my Windows 7 credentials, with full control over \\localmachine\sharedfoldername, the action and the underlying folder.

  "When the converter checks the destination settings, it is reported: unable to connect to the network"\\localmachine\sharedfoldername"share

  So far the measures of investigation:
  -Connection to the share through Windows Explorer works fine; It is possible to write to the share

  -J' tried specifying the share as '\\localhost\sharedfoldername', but get "the share specified network 'localhost\sharedfoldername' does not exist."  It was a bit of a long shot, I guess, but the form does not work in Windows Explorer.

  -Have you tried with the file and print sharing both power - on and off seemed worth a try after looking at other posts on this forum

  The help says 'If you are connected to a local Converter Standalone Server, providing a network path or a local path to the destination directory'.  I tried the local path "C:\Virtual Machines\sharedfoldername", but got the message "error: specified as a (local) drive Destination.»  "Please specify a UNC path such as: \\machine\sharename.

  Aid also States "You have not to provide user credentials if the location is on the local storage of the machine where Converter Standalone server running."  However, the next button is always disabled until credentials are provided.

  Can anyone help please?

  You must be able to access the \\localmachine\sharedname of the * SOURCE * machine. The job of conversions P2V of Windows is to install an agent on the source, then the agent connects to the target (this is why it must be on a network share) and transfers the data. You can browse \\localmachine\sharedname of the source (but not where the converter is installed)?

• Unable to connect to the server Essbase (error #1051293)

  Hello

  Using Essbase Integration Services Consol, I created a template OLAP, and then click OLAP Metaoutline and even checked. But when I tried to load the members and the data I just had an error that is "unable to connect to the Essbase server: Localhost (error #1051293).

  If any of you have solution for this issue, so kindly help me.

  Saami

  Do you know who your security Admin? Or at least you have access to Shared service URL?

  In LDAP, type your user ID and you see your start-up. Add the new app to your user ID, and you define.

  Essbase Administration Services to help online

• BCC error: unable to connect to the server FlexUI/messagebroker/amf

  Hi all

  When I try to access various parts of the ICC as a "Commercial goods" or "targeting and Segmentation-> Merchandising" I get an alert with the following error:

  Unable to connect to the server http://ATG.local:8180 / FlexUI/messagebroker/amf

  I see two exceptions in server.log:

  2013-10-02 16:29:02, ERROR [STDERR] (main) 113 * MessageBrokerServlet failed to initialize due to runtime exception: Exception: java.lang.NullPointerException

  ..

  2013-10-02 16:29:02, INFO 117 [org.apache.catalina.core.ContainerBase. [JBoss.Web]. [localhost]. [/FlexUI]] (main) Marking of servlet MessageBrokerServlet as unavailable

  2013-10-02 16:29:02, ERROR 117 [org.apache.catalina.core.ContainerBase. [JBoss.Web]. [localhost]. [/FlexUI]] (main) Servlet /FlexUI threw the exception in load()

  javax.servlet.UnavailableException

  Full stack trace: http://pastebin.com/raw.php?i=UGbgbrUn

  I don't see anything in the documentation on the configuration of Flex or in the forum about this error.

  Any idea?

  Thanks a lot for your help, once again!

  Concerning

  Mention your ATG/App Server/JDK versions.